RetroZilla/extensions/xforms/nsXFormsInsertDeleteElement.cpp

908 lines
34 KiB
C++
Raw Normal View History

2015-10-21 05:03:22 +02:00
/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is XForms code.
*
* The Initial Developer of the Original Code is
* Novell, Inc.
* Portions created by the Initial Developer are Copyright (C) 2005
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
* Allan Beaufour <abeaufour@novell.com>
* Merle Sterling <msterlin@us.ibm.com>
*
* Alternatively, the contents of this file may be used under the terms of
* either of the GNU General Public License Version 2 or later (the "GPL"),
* or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
#include "nsIDOMAttr.h"
#include "nsIDOMEvent.h"
#include "nsIDOMNode.h"
#include "nsIDOMElement.h"
#include "nsIDOMDocument.h"
#include "nsIDOMNodeList.h"
#include "nsIDOMNamedNodeMap.h"
#include "nsIXFormsRepeatElement.h"
#include "nsIXFormsControl.h"
#include "nsIXFormsContextInfo.h"
#include "nsString.h"
#include "nsIInstanceElementPrivate.h"
#include "nsXFormsActionModuleBase.h"
#include "nsXFormsActionElement.h"
#include "nsXFormsUtils.h"
#include "nsIDOM3Node.h"
#include "math.h"
#ifdef DEBUG
//#define DEBUG_XF_INSERTDELETE
#endif
/**
* Implementation of the XForms \<insert\> and \<delete\> elements.
*/
class nsXFormsInsertDeleteElement : public nsXFormsActionModuleBase
{
private:
PRBool mIsInsert;
enum Location {
eLocation_After,
eLocation_Before,
eLocation_FirstChild
};
// Context Info for events.
nsCOMArray<nsIXFormsContextInfo> mContextInfo;
/** Get the first node of a given type in aNodes.
*
* @param aNodes array of nodes
* @param aNodeType type of node to find
*
* @return aResult node of type aNodeType
*/
nsresult GetFirstNodeOfType(nsCOMArray<nsIDOMNode> *aNodes,
PRUint16 aNodeType,
nsIDOMNode **aResult);
/** Insert a node.
*
* @param aTargetNode target location node
* @param aNewNode node to insert
* @param aLocation insert location relative to target
*
* @return aResult result node
*/
nsresult InsertNode(nsIDOMNode *aTargetNode, nsIDOMNode *aNewNode,
Location aLocation, nsIDOMNode **aResNode);
nsresult RefreshRepeats(nsCOMArray<nsIDOMNode> *aNodes);
public:
/** Constructor */
nsXFormsInsertDeleteElement(PRBool aIsInsert) :
mIsInsert(aIsInsert)
{}
NS_IMETHOD
HandleAction(nsIDOMEvent* aEvent, nsIXFormsActionElement *aParentAction);
/**
* Normally, an action element implements the body of its action handler
* using this method; however, since an `nsXFormsInsertDeleteElement` sets
* up additional context before evaluating `if` and `while`, it overrides
* the `HandleAction` method instead to get full control over the
* execution of its action.
*/
nsresult HandleSingleAction(nsIDOMEvent* aEvent,
nsIXFormsActionElement *aParentAction)
{
return NS_OK;
}
};
NS_IMETHODIMP
nsXFormsInsertDeleteElement::HandleAction(nsIDOMEvent *aEvent,
nsIXFormsActionElement *aParentAction)
{
// Keep element alive while iterating.
nsCOMPtr<nsIDOMElement> element = mElement;
if (!element)
return NS_OK;
mCurrentEvent = aEvent;
nsresult rv;
// Set the maximum run time for the loop (in microseconds).
PRTime microseconds = nsXFormsUtils::waitLimit * PR_USEC_PER_SEC;
PRTime runTime = 0, start = PR_Now();
while (PR_TRUE) {
//
// Step 1 (Insert or Delete): Determine the insert/delete context.
//
// If the bind attribute is present or if the context attribute is not given,
// the insert context is the in-scope evaluation context. Otherwise, the
// XPath expression provided by the context attribute is evaluated using the
// in-scope evaluation context, and the first node rule is applied to obtain
// the insert context.
//
nsCOMPtr<nsIDOMXPathResult> contextNodeset;
nsCOMPtr<nsIDOMNode> contextNode;
PRUint32 contextNodesetSize = 0;
PRInt32 contextPosition;
// Get the in-scope evaluation context. The last parameter to GetNodeContext
// indicates whether it should try to get the context using @bind. We want to
// ignore @bind because it should not change the in-scope evaluation context
// for insert.
nsCOMPtr<nsIModelElementPrivate> model;
nsCOMPtr<nsIDOMElement> bindElement;
nsCOMPtr<nsIXFormsControl> parentControl;
PRBool outerBind;
rv = nsXFormsUtils::GetNodeContext(element,
nsXFormsUtils::ELEMENT_WITH_MODEL_ATTR,
getter_AddRefs(model),
getter_AddRefs(bindElement),
&outerBind,
getter_AddRefs(parentControl),
getter_AddRefs(contextNode),
&contextPosition,
(PRInt32*)&contextNodesetSize,
PR_FALSE);
NS_ENSURE_SUCCESS(rv, rv);
// Determine if the context node is specified via @context.
// If @bind is present, @context is ignored.
nsAutoString bindExpr;
nsAutoString contextExpr;
element->GetAttribute(NS_LITERAL_STRING("bind"), bindExpr);
element->GetAttribute(NS_LITERAL_STRING("context"), contextExpr);
if (bindExpr.IsEmpty() && !contextExpr.IsEmpty()) {
// @context is specified and overrides the in-scope evaluation context.
// The insert context is the result of evaluating @context in the current
// in-scope evaluation context.
rv = nsXFormsUtils::EvaluateXPath(contextExpr, contextNode, element,
nsIDOMXPathResult::ORDERED_NODE_SNAPSHOT_TYPE,
getter_AddRefs(contextNodeset));
NS_ENSURE_SUCCESS(rv, rv);
// The insert/delete action is terminated with no effect if the context
// is the empty node-set.
if (contextNodeset) {
rv = contextNodeset->GetSnapshotLength(&contextNodesetSize);
NS_ENSURE_SUCCESS(rv, rv);
if (contextNodesetSize < 1)
return NS_OK;
// Context node is the first node in the nodeset.
contextNodeset->SnapshotItem(0, getter_AddRefs(contextNode));
contextPosition = 1;
}
}
// The insert/delete action is terminated with no effect if the context
// is the empty node-set.
if (!contextNode)
return NS_OK;
// The insert action is terminated with no effect if the context attribute
// is given and the insert context does not evaluate to an element node.
if (mIsInsert && !contextExpr.IsEmpty()) {
PRUint16 nodeType;
contextNode->GetNodeType(&nodeType);
if (nodeType != nsIDOMNode::ELEMENT_NODE)
return NS_OK;
}
// Test the `if` and `while` attributes to determine whether this action
// can be performed and should be repeated. As the insert and delete
// actions can change their context, we do this testing here instead of
// relying on the default logic from our parent class' `HandleAction`
// (or `DoHandleAction`) definition.
PRBool usesWhile;
if (!nsXFormsActionModuleBase::CanPerformAction(element, &usesWhile,
contextNode,
contextNodesetSize,
contextPosition)) {
return NS_OK;
}
//
// Step 2 (Insert or Delete): Determine the node-set binding.
//
// If the bind attribute is present, it directly determines the Node Set
// Binding node-set. If a nodeset attribute is present, it is evaluated
// within the context to determine the Node Set Binding node-set.
//
// A NodeSet binding attribute (@bind or @nodeset) is required unless
// the context attribute is present.
//
nsCOMPtr<nsIDOMXPathResult> nodeset;
PRUint32 nodesetSize = 0;
nsAutoString nodesetExpr;
if (bindExpr.IsEmpty()) {
element->GetAttribute(NS_LITERAL_STRING("nodeset"), nodesetExpr);
if (!nodesetExpr.IsEmpty()) {
// Evaluate the nodeset attribute within the insert context.
rv = nsXFormsUtils::EvaluateXPath(nodesetExpr, contextNode, element,
nsIDOMXPathResult::ORDERED_NODE_SNAPSHOT_TYPE,
getter_AddRefs(nodeset));
NS_ENSURE_SUCCESS(rv, rv);
}
} else {
PRBool usesModelBinding;
rv = nsXFormsUtils::EvaluateNodeBinding(element,
nsXFormsUtils::ELEMENT_WITH_MODEL_ATTR,
EmptyString(),
EmptyString(),
nsIDOMXPathResult::ORDERED_NODE_SNAPSHOT_TYPE,
getter_AddRefs(model),
getter_AddRefs(nodeset),
&usesModelBinding);
NS_ENSURE_SUCCESS(rv, rv);
if (!model)
return NS_OK;
}
if (nodeset) {
rv = nodeset->GetSnapshotLength(&nodesetSize);
NS_ENSURE_SUCCESS(rv, rv);
}
// The insert action is terminated with no effect if the context attribute
// is not given and the Node Set Binding node-set is the empty node-set.
//
// The delete action is terminated with no effect if the Node Set Binding
// node-set is the empty node-set.
if (!nodeset || nodesetSize < 1) {
if (!mIsInsert || (mIsInsert && contextExpr.IsEmpty()))
return NS_OK;
}
//
// Step 3 (Insert): Determine the origin node-set.
//
nsCOMPtr<nsIDOMXPathResult> originNodeset;
nsCOMPtr<nsIDOMXPathResult> originNode;
PRUint32 originNodesetSize = 0;
if (mIsInsert) {
// If the origin attribute is not given and the Node Set Binding node-set
// is empty, then the origin node-set is the empty node-set. Otherwise,
// if the origin attribute is not given, then the origin node-set consists
// of the last node of the Node Set Binding node-set (which we will obtain
// just before performing the insert).
//
// If the origin attribute is given, the origin node-set is the result of
// the evaluation of the origin attribute in the insert context.
nsAutoString origin;
element->GetAttribute(NS_LITERAL_STRING("origin"), origin);
if (!origin.IsEmpty()) {
rv = nsXFormsUtils::EvaluateXPath(origin, contextNode, element,
nsIDOMXPathResult::ORDERED_NODE_SNAPSHOT_TYPE,
getter_AddRefs(originNodeset));
NS_ENSURE_SUCCESS(rv, rv);
// The insert action is terminated with no effect if the origin node-set
// is the empty node-set.
if (!originNodeset)
return NS_OK;
rv = originNodeset->GetSnapshotLength(&originNodesetSize);
NS_ENSURE_SUCCESS(rv, rv);
// The insert action is terminated with no effect if the origin node-set
// is the empty node-set.
if (originNodesetSize < 1)
return NS_OK;
// Context Info: 'origin-nodes'
nsCOMPtr<nsXFormsContextInfo> contextInfo =
new nsXFormsContextInfo(element);
NS_ENSURE_TRUE(contextInfo, NS_ERROR_OUT_OF_MEMORY);
contextInfo->SetNodesetValue("origin-nodes", originNodeset);
mContextInfo.AppendObject(contextInfo);
}
}
//
// Step 4 (Insert), Step 3 (Delete):
// Determine the insert/delete location node.
//
// Insert: If the Node Set Binding node-set is not specified or empty, the
// insert location node is the insert context node. Otherwise, if the at
// attribute is not given, then the insert location node is the last node
// of the Node Set Binding node-set. Otherwise, an insert location node is
// determined from the at attribute.
//
// Delete: If the at attribute is not specified, there is no delete location.
// Otherwise, the delete location is determined by evaluating the XPath
// expression specified by the at attribute.
//
nsCOMPtr<nsIDOMNode> locationNode;
PRUint32 atInt = 0;
double atDoub = 0;
nsAutoString atExpr;
element->GetAttribute(NS_LITERAL_STRING("at"), atExpr);
if (mIsInsert) {
if (!nodeset || nodesetSize < 1) {
// The insert location node is the insert context node.
locationNode = contextNode;
} else if (atExpr.IsEmpty()) {
// The insert location node is the last node of the Node Set Binding
// node-set.
nodeset->SnapshotItem(nodesetSize - 1, getter_AddRefs(locationNode));
NS_ENSURE_STATE(locationNode);
}
}
if (!locationNode) {
// For insert, we have a nodeset and got past the special cases of an empty
// nodeset or no @at expression so the insert location node is determined by
// @at.
//
// For delete, the delete location is determined by the @at expression if
// present; otherwise there is no delete location and each node in the
// Node Set Binding node-set is deleted, unless the node is the root
// document element of an instance.
if (!atExpr.IsEmpty()) {
// The evaluation context node is the first node in document order of
// the Node Set Binding node-set.
nsCOMPtr<nsIDOMNode> evalContextNode;
nodeset->SnapshotItem(0, getter_AddRefs(evalContextNode));
// The context size is the size of the Node Set Binding node-set and
// the context position is 1.
nsCOMPtr<nsIDOMXPathResult> xpRes;
rv = nsXFormsUtils::EvaluateXPath(atExpr, evalContextNode, element,
nsIDOMXPathResult::NUMBER_TYPE,
getter_AddRefs(xpRes), 1, nodesetSize);
if (xpRes) {
rv = xpRes->GetNumberValue(&atDoub);
NS_ENSURE_SUCCESS(rv, rv);
}
// Determine the insert/delete location.
if (atDoub < 1) {
atInt = 1;
} else {
// If the location is greater than the nodeset size or NaN,
// the location is the end of the nodeset.
// XXX: Need to check for NaN but isnan() is not portable.
atInt = (PRInt32) floor(atDoub+0.5);
if (atInt > nodesetSize)
atInt = nodesetSize;
}
// The location node is the node in the Node Set Binding node-set at
// the position given by the location.
nodeset->SnapshotItem(atInt - 1, getter_AddRefs(locationNode));
NS_ENSURE_STATE(locationNode);
}
}
// Context Info: 'insert-location-node' or 'delete-location'
nsCOMPtr<nsXFormsContextInfo> contextInfo;
if (mIsInsert) {
contextInfo = new nsXFormsContextInfo(element);
NS_ENSURE_TRUE(contextInfo, NS_ERROR_OUT_OF_MEMORY);
contextInfo->SetNodeValue("insert-location-node", locationNode);
mContextInfo.AppendObject(contextInfo);
} else {
contextInfo = new nsXFormsContextInfo(element);
NS_ENSURE_TRUE(contextInfo, NS_ERROR_OUT_OF_MEMORY);
contextInfo->SetNumberValue("delete-location", atInt);
mContextInfo.AppendObject(contextInfo);
}
//
// Step 5 (Insert): Each node in the origin node-set is cloned in the
// order it appears in the origin node-set. If the origin node-set is empty
// (Step 3), the origin node-set consists of the last node of the Node Set
// Binding node-set.
//
// The clones are deep copies of the original nodes except the contents of
// nodes of type xsd:ID are modified to remain as unique values in the
// instance data after the clones are inserted.
//
// XXX: Need to modify the contents of nodes of type xsd:ID to remain
// unique.
nsCOMArray<nsIDOMNode> cloneNodes;
nsCOMPtr<nsIDOMXPathResult> cloneNodeset;
PRUint32 cloneNodesetSize = 0;
if (mIsInsert) {
nsCOMPtr<nsIDOMNode> prototypeNode, newNode;
PRUint32 cloneIndex;
// Get prototype node(s) and clone.
if (originNodesetSize < 1) {
// Origin nodeset is empty. Clone the last node of nodeset.
cloneNodeset = nodeset;
cloneNodesetSize = nodesetSize;
cloneIndex = nodesetSize - 1;
} else {
// Clone all the nodes in the origin node-set.
cloneNodeset = originNodeset;
cloneNodesetSize = originNodesetSize;
cloneIndex = 0;
}
// Context Info: 'inserted-nodes'
nsCOMPtr<nsXFormsContextInfo> contextInfo =
new nsXFormsContextInfo(element);
NS_ENSURE_TRUE(contextInfo, NS_ERROR_OUT_OF_MEMORY);
contextInfo->SetNodesetValue("inserted-nodes", cloneNodeset);
mContextInfo.AppendObject(contextInfo);
cloneNodeset->SnapshotItem(cloneIndex, getter_AddRefs(prototypeNode));
NS_ENSURE_STATE(prototypeNode);
// The prototypeNode (node to be cloned) and the locationNode (node to
// which the clone will be inserted) may belong to different instances.
nsCOMPtr<nsIDOMDocument> originDoc, locationDoc;
prototypeNode->GetOwnerDocument(getter_AddRefs(originDoc));
NS_ENSURE_STATE(originDoc);
locationNode->GetOwnerDocument(getter_AddRefs(locationDoc));
NS_ENSURE_STATE(locationDoc);
while ((cloneIndex < cloneNodesetSize) && prototypeNode) {
if (!SameCOMIdentity(originDoc, locationDoc)) {
locationDoc->ImportNode(prototypeNode, PR_TRUE, getter_AddRefs(newNode));
} else {
prototypeNode->CloneNode(PR_TRUE, getter_AddRefs(newNode));
}
NS_ENSURE_STATE(newNode);
cloneNodes.AppendObject(newNode);
// Get the next node in the node-set.
++cloneIndex;
cloneNodeset->SnapshotItem(cloneIndex, getter_AddRefs(prototypeNode));
}
}
//
// Step 6 and 7 (Insert): Determine the target location (Steps 6a-d) and
// insert all of the nodes that were cloned in Step 5.
//
// Step 4 (Delete): Delete the nodes.
//
nsCOMPtr<nsIDOMDocument> locationDoc;
nsCOMPtr<nsIDOMElement> locationDocElement;
nsCOMPtr<nsIDOMNode> parentNode, newNode, resNode, instNode;
if (mIsInsert) {
// The cloned node or nodes are inserted in the order they were cloned at
// their target location depending on their node type.
nsCOMPtr<nsIDOMNode> newNode;
for (PRInt32 i = 0; i < cloneNodes.Count(); ++i) {
// Node to be inserted.
newNode = cloneNodes[i];
// Get the node type of the insert node and location node.
PRUint16 newNodeType, locationNodeType;
newNode->GetNodeType(&newNodeType);
locationNode->GetNodeType(&locationNodeType);
// Step 6a - If the Node Set Binding node-set is not specified or empty
// OR Step 6b - If the Node Set Binding node-set is specified and not
// empty and the type of the cloned node is different from the type of
// the insert location node, the target location depends on the node
// type of the cloned node.
//
// If the cloned node is an attribute, then the target location is before
// the first attribute of the insert location node. If the cloned node is
// not an attribute, then the target location is before the first child
// of the insert location node.
if ((!nodeset || nodesetSize < 1) ||
(nodeset && nodesetSize > 0 && newNodeType != locationNodeType)) {
Location location = eLocation_Before;
nsCOMPtr<nsIDOMNode> targetNode;
if (newNodeType != nsIDOMNode::ATTRIBUTE_NODE) {
// Target location is before the first child of location node. If the
// location node is empty (has no children), it remains the location
// node and the new node will become the first child of the location
// node.
locationNode->GetFirstChild(getter_AddRefs(targetNode));
if (!targetNode) {
// New node will become first child of locationNode.
location = eLocation_FirstChild;
targetNode = locationNode;
}
}
InsertNode(targetNode, newNode, location, getter_AddRefs(resNode));
} else {
// Step 6c - If insert location node is the root element of an
// instance, then that instance root element location is the target
// location and the cloned node replaces the instance element. If
// there is more than one cloned node to insert, only the first node
// that does not cause a conflict is considered.
//
locationNode->GetOwnerDocument(getter_AddRefs(locationDoc));
NS_ENSURE_STATE(locationDoc);
locationDoc->GetDocumentElement(getter_AddRefs(locationDocElement));
if (SameCOMIdentity(locationNode, locationDocElement)) {
// Step 7 - Replace the instance element with the first element
// node of the cloned node(s).
nsCOMPtr<nsIDOMNode> insertNode;
GetFirstNodeOfType(&cloneNodes, nsIDOMNode::ELEMENT_NODE,
getter_AddRefs(insertNode));
if (insertNode) {
nsCOMPtr<nsIDOMNode> child;
locationDoc->RemoveChild(locationNode, getter_AddRefs(child));
locationDoc->AppendChild(insertNode, getter_AddRefs(resNode));
// Done...because we only consider the first node that does
// not cause a conflict.
break;
}
} else {
// Step 6d - the target location is immediately before or after the
// insert location node, based on the position attribute setting or
// its default.
PRBool insertAfter = PR_TRUE;
nsAutoString position;
element->GetAttribute(NS_LITERAL_STRING("position"), position);
if (!position.IsEmpty()) {
if (position.EqualsLiteral("before")) {
insertAfter = PR_FALSE;
} else if (!position.EqualsLiteral("after")) {
// This is not a valid document...
return NS_ERROR_FAILURE;
}
}
// Context Info: 'position'.
nsCOMPtr<nsXFormsContextInfo> contextInfo =
new nsXFormsContextInfo(element);
NS_ENSURE_TRUE(contextInfo, NS_ERROR_OUT_OF_MEMORY);
contextInfo->SetStringValue("position", position);
mContextInfo.AppendObject(contextInfo);
InsertNode(locationNode, newNode,
insertAfter ? eLocation_After: eLocation_Before,
getter_AddRefs(resNode));
}
}
}
rv = nsXFormsUtils::GetInstanceNodeForData(resNode, getter_AddRefs(instNode));
NS_ENSURE_SUCCESS(rv, rv);
// Step 8: Set indexes for repeats
rv = RefreshRepeats(&cloneNodes);
NS_ENSURE_SUCCESS(rv, rv);
} else {
// Delete
// If there is no delete location, each node in the Node Set Binding
// node-set is deleted, unless the node is the root document element of an
// instance.
//
// If there is a delete location, the node at the delete location in the
// Node Set Binding node-set is deleted, unless the node is the root
// document element of an instance.
PRBool didDelete = PR_FALSE;
PRUint32 deleteIndex, deleteCount;
if (!locationNode) {
// Delete all the nodes in the node-set.
deleteIndex = 0;
deleteCount = nodesetSize;
} else {
// Delete the node at the delete location.
deleteIndex = atInt - 1;
deleteCount = atInt;
}
// Context Info: 'deleted-nodes'
nsCOMPtr<nsXFormsContextInfo> contextInfo =
new nsXFormsContextInfo(element);
NS_ENSURE_TRUE(contextInfo, NS_ERROR_OUT_OF_MEMORY);
contextInfo->SetNodesetValue("deleted-nodes", nodeset);
mContextInfo.AppendObject(contextInfo);
nodeset->SnapshotItem(deleteIndex, getter_AddRefs(locationNode));
NS_ENSURE_STATE(locationNode);
locationNode->GetOwnerDocument(getter_AddRefs(locationDoc));
NS_ENSURE_STATE(locationDoc);
rv = nsXFormsUtils::GetInstanceNodeForData(locationNode, getter_AddRefs(instNode));
NS_ENSURE_SUCCESS(rv, rv);
locationDoc->GetDocumentElement(getter_AddRefs(locationDocElement));
while ((deleteIndex < deleteCount) && locationNode) {
// Delete the node(s) unless the delete location is the root document
// element of an instance.
PRUint16 locationNodeType;
locationNode->GetNodeType(&locationNodeType);
if (locationNodeType == nsIDOMNode::ATTRIBUTE_NODE) {
nsCOMPtr<nsIDOMElement> ownerElement;
nsCOMPtr<nsIDOMAttr> attrNode(do_QueryInterface(locationNode));
attrNode->GetOwnerElement(getter_AddRefs(ownerElement));
NS_ENSURE_STATE(ownerElement);
nsCOMPtr<nsIDOMAttr> resAttr;
ownerElement->RemoveAttributeNode(attrNode, getter_AddRefs(resAttr));
resNode = locationNode;
// Deleted at least one node so delete will not terminate.
didDelete = PR_TRUE;
} else {
if (!SameCOMIdentity(locationNode, locationDocElement)) {
locationNode->GetParentNode(getter_AddRefs(parentNode));
NS_ENSURE_STATE(parentNode);
rv = parentNode->RemoveChild(locationNode, getter_AddRefs(resNode));
NS_ENSURE_SUCCESS(rv, rv);
// Deleted at least one node so delete will not terminate.
didDelete = PR_TRUE;
}
}
// Get the next node in the node-set.
++deleteIndex;
nodeset->SnapshotItem(deleteIndex, getter_AddRefs(locationNode));
}
// The delete action is terminated with no effect if no node is deleted.
if (!didDelete)
return NS_OK;
}
NS_ENSURE_STATE(resNode);
// Dispatch xforms-insert/delete event to the instance node we have modified
// data for
rv = nsXFormsUtils::DispatchEvent(instNode,
mIsInsert ? eEvent_Insert : eEvent_Delete,
nsnull, nsnull, &mContextInfo);
NS_ENSURE_SUCCESS(rv, rv);
// Dispatch refreshing events to the model
if (aParentAction) {
aParentAction->SetRebuild(model, PR_TRUE);
aParentAction->SetRecalculate(model, PR_TRUE);
aParentAction->SetRevalidate(model, PR_TRUE);
aParentAction->SetRefresh(model, PR_TRUE);
} else {
rv = model->RequestRebuild();
NS_ENSURE_SUCCESS(rv, rv);
rv = model->RequestRecalculate();
NS_ENSURE_SUCCESS(rv, rv);
rv = model->RequestRevalidate();
NS_ENSURE_SUCCESS(rv, rv);
rv = model->RequestRefresh();
NS_ENSURE_SUCCESS(rv, rv);
}
// Repeat this action if it can iterate and if it uses the `while`
// attribute (the expression of which must have evaluated to true to
// arrive here).
if (!CanIterate() || !usesWhile) {
return NS_OK;
}
// See if we've exceeded our time limit, and if so, prompt the user to
// determine if she wants to cancel the loop.
LL_SUB(runTime, PR_Now(), start);
if (microseconds <= 0 || runTime < microseconds) {
continue;
}
// The remaining part of the loop prompts the user about cancelling the
// loop, and is only executed if we've gone over the time limit.
PRBool stopWaiting = nsXFormsUtils::AskStopWaiting(element);
if (stopWaiting) {
// Stop the loop
return NS_OK;
} else {
start = PR_Now();
}
}
return NS_OK;
}
nsresult
nsXFormsInsertDeleteElement::GetFirstNodeOfType(nsCOMArray<nsIDOMNode> *aNodes,
PRUint16 aNodeType,
nsIDOMNode **aResult)
{
nsCOMPtr<nsIDOMNode> currentNode;
for (PRInt32 i = 0; i < aNodes->Count(); ++i) {
currentNode = aNodes->ObjectAt(i);
PRUint16 nodeType;
currentNode->GetNodeType(&nodeType);
if (nodeType == aNodeType) {
NS_IF_ADDREF(*aResult = currentNode);
break;
}
}
return NS_OK;
}
nsresult
nsXFormsInsertDeleteElement::InsertNode(nsIDOMNode *aTargetNode,
nsIDOMNode *aNewNode,
Location aLocation,
nsIDOMNode **aResNode)
{
NS_ENSURE_ARG(aTargetNode);
NS_ENSURE_ARG(aNewNode);
NS_ENSURE_ARG_POINTER(aResNode);
// Make sure the result node is null in case we encounter a condition
// where the node cannot be inserted and is skipped.
*aResNode = nsnull;
// Step 7 - The new node is inserted at the target location depending on its
// node type. If the cloned node is a duplicate of another attribute in its
// parent element, then the duplicate attribute is first removed. If a cloned
// node cannot be placed at the target location due to a node type conflict,
// then the insertion for that particular clone node is ignored.
nsCOMPtr<nsIDOMNode> resNode;
PRUint16 targetNodeType, newNodeType;
aTargetNode->GetNodeType(&targetNodeType);
aNewNode->GetNodeType(&newNodeType);
if (newNodeType == nsIDOMNode::ATTRIBUTE_NODE) {
// Can add an attribute to an element node or the owning element
// of an attribute node.
nsCOMPtr<nsIDOMElement> ownerElement;
if (targetNodeType == nsIDOMNode::ELEMENT_NODE) {
ownerElement = do_QueryInterface(aTargetNode);
} else if (targetNodeType == nsIDOMNode::ATTRIBUTE_NODE) {
nsCOMPtr<nsIDOMAttr> targetAttrNode(do_QueryInterface(aTargetNode));
targetAttrNode->GetOwnerElement(getter_AddRefs(ownerElement));
}
NS_ENSURE_STATE(ownerElement);
// Check for a duplicate attribute.
nsAutoString attrNamespace, attrName, attrValue;
aNewNode->GetNamespaceURI(attrNamespace);
aNewNode->GetLocalName(attrName);
aNewNode->GetNodeValue(attrValue);
PRBool hasAttribute = PR_FALSE;
ownerElement->HasAttributeNS(attrNamespace, attrName, &hasAttribute);
if (hasAttribute) {
ownerElement->RemoveAttributeNS(attrNamespace, attrName);
}
ownerElement->SetAttributeNS(attrNamespace, attrName, attrValue);
resNode = aTargetNode;
resNode.swap(*aResNode);
} else {
// New node will be inserted at location aLocation.
nsCOMPtr<nsIDOMNode> targetNode = aTargetNode;
nsCOMPtr<nsIDOMNode> parentNode;
targetNode->GetParentNode(getter_AddRefs(parentNode));
NS_ENSURE_STATE(parentNode);
if (aLocation == eLocation_FirstChild) {
aTargetNode->AppendChild(aNewNode, getter_AddRefs(resNode));
resNode.swap(*aResNode);
} else {
if (aLocation == eLocation_After) {
// If we're at the end of the nodeset, this returns nsnull, which is
// fine, because InsertBefore then inserts at the end of the nodeset.
aTargetNode->GetNextSibling(getter_AddRefs(targetNode));
}
parentNode->InsertBefore(aNewNode, targetNode,
getter_AddRefs(resNode));
resNode.swap(*aResNode);
}
}
return NS_OK;
}
nsresult
nsXFormsInsertDeleteElement::RefreshRepeats(nsCOMArray<nsIDOMNode> *aNodes)
{
// XXXbeaufour: only check repeats belonging to the same model...
// possibly use mFormControls? Should be quicker than searching through
// entire document!! mModel->GetControls("repeat"); Would also possibly
// save a QI?
nsCOMPtr<nsIDOMDocument> document;
nsresult rv = mElement->GetOwnerDocument(getter_AddRefs(document));
NS_ENSURE_STATE(document);
nsCOMPtr<nsIDOMNodeList> repeatNodes;
document->GetElementsByTagNameNS(NS_LITERAL_STRING(NS_NAMESPACE_XFORMS),
NS_LITERAL_STRING("repeat"),
getter_AddRefs(repeatNodes));
NS_ENSURE_STATE(repeatNodes);
// work over each node and if the node contains the inserted element
PRUint32 nodeCount;
rv = repeatNodes->GetLength(&nodeCount);
NS_ENSURE_SUCCESS(rv, rv);
for (PRUint32 node = 0; node < nodeCount; ++node) {
nsCOMPtr<nsIDOMNode> repeatNode;
rv = repeatNodes->Item(node, getter_AddRefs(repeatNode));
nsCOMPtr<nsIXFormsRepeatElement> repeatEl(do_QueryInterface(repeatNode));
NS_ENSURE_STATE(repeatEl);
for (PRInt32 i = 0; i < aNodes->Count(); ++i) {
nsCOMPtr<nsIDOMNode> newNode = aNodes->ObjectAt(i);
rv = repeatEl->HandleNodeInsert(newNode);
NS_ENSURE_SUCCESS(rv, rv);
}
}
return NS_OK;
}
NS_HIDDEN_(nsresult)
NS_NewXFormsInsertElement(nsIXTFElement **aResult)
{
*aResult = new nsXFormsInsertDeleteElement(PR_TRUE);
if (!*aResult)
return NS_ERROR_OUT_OF_MEMORY;
NS_ADDREF(*aResult);
return NS_OK;
}
NS_HIDDEN_(nsresult)
NS_NewXFormsDeleteElement(nsIXTFElement **aResult)
{
*aResult = new nsXFormsInsertDeleteElement(PR_FALSE);
if (!*aResult)
return NS_ERROR_OUT_OF_MEMORY;
NS_ADDREF(*aResult);
return NS_OK;
}