RetroZilla/security/nss/lib/certhigh/ocsp.h

635 lines
24 KiB
C
Raw Normal View History

2015-10-21 05:03:22 +02:00
/* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is the Netscape security libraries.
*
* The Initial Developer of the Original Code is
* Netscape Communications Corporation.
* Portions created by the Initial Developer are Copyright (C) 1994-2000
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
*
* Alternatively, the contents of this file may be used under the terms of
* either the GNU General Public License Version 2 or later (the "GPL"), or
* the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
/*
* Interface to the OCSP implementation.
*
* $Id: ocsp.h,v 1.14 2009/03/21 01:40:35 nelson%bolyard.com Exp $
*/
#ifndef _OCSP_H_
#define _OCSP_H_
#include "plarena.h"
#include "seccomon.h"
#include "secoidt.h"
#include "keyt.h"
#include "certt.h"
#include "ocspt.h"
/************************************************************************/
SEC_BEGIN_PROTOS
/*
* This function registers the HttpClient with whose functions the
* HttpClientFcn structure has been populated as the default Http
* client.
*
* The function table must be a global object.
* The caller must ensure that NSS will be able to call
* the registered functions for the lifetime of the process.
*/
extern SECStatus
SEC_RegisterDefaultHttpClient(const SEC_HttpClientFcn *fcnTable);
/*
* This function obtains the HttpClient which has been registered
* by an earlier call to SEC_RegisterDefaultHttpClient.
*/
extern const SEC_HttpClientFcn *
SEC_GetRegisteredHttpClient(void);
/*
* Sets parameters that control NSS' internal OCSP cache.
* maxCacheEntries, special varlues are:
* -1 disable cache
* 0 unlimited cache entries
* minimumSecondsToNextFetchAttempt:
* whenever an OCSP request was attempted or completed over the network,
* wait at least this number of seconds before trying to fetch again.
* maximumSecondsToNextFetchAttempt:
* this is the maximum age of a cached response we allow, until we try
* to fetch an updated response, even if the OCSP responder expects
* that newer information update will not be available yet.
*/
extern SECStatus
CERT_OCSPCacheSettings(PRInt32 maxCacheEntries,
PRUint32 minimumSecondsToNextFetchAttempt,
PRUint32 maximumSecondsToNextFetchAttempt);
/*
* Set the desired behaviour on OCSP failures.
* See definition of ocspFailureMode for allowed choices.
*/
extern SECStatus
CERT_SetOCSPFailureMode(SEC_OcspFailureMode ocspFailureMode);
/*
* Configure the maximum time NSS will wait for an OCSP response.
*/
extern SECStatus
CERT_SetOCSPTimeout(PRUint32 seconds);
/*
* Removes all items currently stored in the OCSP cache.
*/
extern SECStatus
CERT_ClearOCSPCache(void);
/*
* FUNCTION: CERT_EnableOCSPChecking
* Turns on OCSP checking for the given certificate database.
* INPUTS:
* CERTCertDBHandle *handle
* Certificate database for which OCSP checking will be enabled.
* RETURN:
* Returns SECFailure if an error occurred (likely only problem
* allocating memory); SECSuccess otherwise.
*/
extern SECStatus
CERT_EnableOCSPChecking(CERTCertDBHandle *handle);
/*
* FUNCTION: CERT_DisableOCSPChecking
* Turns off OCSP checking for the given certificate database.
* This routine disables OCSP checking. Though it will return
* SECFailure if OCSP checking is not enabled, it is "safe" to
* call it that way and just ignore the return value, if it is
* easier to just call it than to "remember" whether it is enabled.
* INPUTS:
* CERTCertDBHandle *handle
* Certificate database for which OCSP checking will be disabled.
* RETURN:
* Returns SECFailure if an error occurred (usually means that OCSP
* checking was not enabled or status contexts were not initialized --
* error set will be SEC_ERROR_OCSP_NOT_ENABLED); SECSuccess otherwise.
*/
extern SECStatus
CERT_DisableOCSPChecking(CERTCertDBHandle *handle);
/*
* FUNCTION: CERT_SetOCSPDefaultResponder
* Specify the location and cert of the default responder.
* If OCSP checking is already enabled *and* use of a default responder
* is also already enabled, all OCSP checking from now on will go directly
* to the specified responder. If OCSP checking is not enabled, or if
* it is but use of a default responder is not enabled, the information
* will be recorded and take effect whenever both are enabled.
* INPUTS:
* CERTCertDBHandle *handle
* Cert database on which OCSP checking should use the default responder.
* char *url
* The location of the default responder (e.g. "http://foo.com:80/ocsp")
* Note that the location will not be tested until the first attempt
* to send a request there.
* char *name
* The nickname of the cert to trust (expected) to sign the OCSP responses.
* If the corresponding cert cannot be found, SECFailure is returned.
* RETURN:
* Returns SECFailure if an error occurred; SECSuccess otherwise.
* The most likely error is that the cert for "name" could not be found
* (probably SEC_ERROR_UNKNOWN_CERT). Other errors are low-level (no memory,
* bad database, etc.).
*/
extern SECStatus
CERT_SetOCSPDefaultResponder(CERTCertDBHandle *handle,
const char *url, const char *name);
/*
* FUNCTION: CERT_EnableOCSPDefaultResponder
* Turns on use of a default responder when OCSP checking.
* If OCSP checking is already enabled, this will make subsequent checks
* go directly to the default responder. (The location of the responder
* and the nickname of the responder cert must already be specified.)
* If OCSP checking is not enabled, this will be recorded and take effect
* whenever it is enabled.
* INPUTS:
* CERTCertDBHandle *handle
* Cert database on which OCSP checking should use the default responder.
* RETURN:
* Returns SECFailure if an error occurred; SECSuccess otherwise.
* No errors are especially likely unless the caller did not previously
* perform a successful call to SetOCSPDefaultResponder (in which case
* the error set will be SEC_ERROR_OCSP_NO_DEFAULT_RESPONDER).
*/
extern SECStatus
CERT_EnableOCSPDefaultResponder(CERTCertDBHandle *handle);
/*
* FUNCTION: CERT_DisableOCSPDefaultResponder
* Turns off use of a default responder when OCSP checking.
* (Does nothing if use of a default responder is not enabled.)
* INPUTS:
* CERTCertDBHandle *handle
* Cert database on which OCSP checking should stop using a default
* responder.
* RETURN:
* Returns SECFailure if an error occurred; SECSuccess otherwise.
* Errors very unlikely (like random memory corruption...).
*/
extern SECStatus
CERT_DisableOCSPDefaultResponder(CERTCertDBHandle *handle);
/*
* -------------------------------------------------------
* The Functions above are those expected to be used by a client
* providing OCSP status checking along with every cert verification.
* The functions below are for OCSP testing, debugging, or clients
* or servers performing more specialized OCSP tasks.
* -------------------------------------------------------
*/
/*
* FUNCTION: CERT_CreateOCSPRequest
* Creates a CERTOCSPRequest, requesting the status of the certs in
* the given list.
* INPUTS:
* CERTCertList *certList
* A list of certs for which status will be requested.
* Note that all of these certificates should have the same issuer,
* or it's expected the response will be signed by a trusted responder.
* If the certs need to be broken up into multiple requests, that
* must be handled by the caller (and thus by having multiple calls
* to this routine), who knows about where the request(s) are being
* sent and whether there are any trusted responders in place.
* PRTime time
* Indicates the time for which the certificate status is to be
* determined -- this may be used in the search for the cert's issuer
* but has no effect on the request itself.
* PRBool addServiceLocator
* If true, the Service Locator extension should be added to the
* single request(s) for each cert.
* CERTCertificate *signerCert
* If non-NULL, means sign the request using this cert. Otherwise,
* do not sign.
* XXX note that request signing is not yet supported; see comment in code
* RETURN:
* A pointer to a CERTOCSPRequest structure containing an OCSP request
* for the cert list. On error, null is returned, with an error set
* indicating the reason. This is likely SEC_ERROR_UNKNOWN_ISSUER.
* (The issuer is needed to create a request for the certificate.)
* Other errors are low-level problems (no memory, bad database, etc.).
*/
extern CERTOCSPRequest *
CERT_CreateOCSPRequest(CERTCertList *certList, PRTime time,
PRBool addServiceLocator,
CERTCertificate *signerCert);
/*
* FUNCTION: CERT_AddOCSPAcceptableResponses
* Add the AcceptableResponses extension to an OCSP Request.
* INPUTS:
* CERTOCSPRequest *request
* The request to which the extension should be added.
* SECOidTag responseType0, ...
* A list (of one or more) of SECOidTag -- each of the response types
* to be added. The last OID *must* be SEC_OID_PKIX_OCSP_BASIC_RESPONSE.
* (This marks the end of the list, and it must be specified because a
* client conforming to the OCSP standard is required to handle the basic
* response type.) The OIDs are not checked in any way.
* RETURN:
* SECSuccess if the extension is added; SECFailure if anything goes wrong.
* All errors are internal or low-level problems (e.g. no memory).
*/
extern SECStatus
CERT_AddOCSPAcceptableResponses(CERTOCSPRequest *request,
SECOidTag responseType0, ...);
/*
* FUNCTION: CERT_EncodeOCSPRequest
* DER encodes an OCSP Request, possibly adding a signature as well.
* XXX Signing is not yet supported, however; see comments in code.
* INPUTS:
* PLArenaPool *arena
* The return value is allocated from here.
* If a NULL is passed in, allocation is done from the heap instead.
* CERTOCSPRequest *request
* The request to be encoded.
* void *pwArg
* Pointer to argument for password prompting, if needed. (Definitely
* not needed if not signing.)
* RETURN:
* Returns a NULL on error and a pointer to the SECItem with the
* encoded value otherwise. Any error is likely to be low-level
* (e.g. no memory).
*/
extern SECItem *
CERT_EncodeOCSPRequest(PLArenaPool *arena, CERTOCSPRequest *request,
void *pwArg);
/*
* FUNCTION: CERT_DecodeOCSPRequest
* Decode a DER encoded OCSP Request.
* INPUTS:
* SECItem *src
* Pointer to a SECItem holding DER encoded OCSP Request.
* RETURN:
* Returns a pointer to a CERTOCSPRequest containing the decoded request.
* On error, returns NULL. Most likely error is trouble decoding
* (SEC_ERROR_OCSP_MALFORMED_REQUEST), or low-level problem (no memory).
*/
extern CERTOCSPRequest *
CERT_DecodeOCSPRequest(SECItem *src);
/*
* FUNCTION: CERT_DestroyOCSPRequest
* Frees an OCSP Request structure.
* INPUTS:
* CERTOCSPRequest *request
* Pointer to CERTOCSPRequest to be freed.
* RETURN:
* No return value; no errors.
*/
extern void
CERT_DestroyOCSPRequest(CERTOCSPRequest *request);
/*
* FUNCTION: CERT_DecodeOCSPResponse
* Decode a DER encoded OCSP Response.
* INPUTS:
* SECItem *src
* Pointer to a SECItem holding DER encoded OCSP Response.
* RETURN:
* Returns a pointer to a CERTOCSPResponse (the decoded OCSP Response);
* the caller is responsible for destroying it. Or NULL if error (either
* response could not be decoded (SEC_ERROR_OCSP_MALFORMED_RESPONSE),
* it was of an unexpected type (SEC_ERROR_OCSP_UNKNOWN_RESPONSE_TYPE),
* or a low-level or internal error occurred).
*/
extern CERTOCSPResponse *
CERT_DecodeOCSPResponse(SECItem *src);
/*
* FUNCTION: CERT_DestroyOCSPResponse
* Frees an OCSP Response structure.
* INPUTS:
* CERTOCSPResponse *request
* Pointer to CERTOCSPResponse to be freed.
* RETURN:
* No return value; no errors.
*/
extern void
CERT_DestroyOCSPResponse(CERTOCSPResponse *response);
/*
* FUNCTION: CERT_GetEncodedOCSPResponse
* Creates and sends a request to an OCSP responder, then reads and
* returns the (encoded) response.
* INPUTS:
* PLArenaPool *arena
* Pointer to arena from which return value will be allocated.
* If NULL, result will be allocated from the heap (and thus should
* be freed via SECITEM_FreeItem).
* CERTCertList *certList
* A list of certs for which status will be requested.
* Note that all of these certificates should have the same issuer,
* or it's expected the response will be signed by a trusted responder.
* If the certs need to be broken up into multiple requests, that
* must be handled by the caller (and thus by having multiple calls
* to this routine), who knows about where the request(s) are being
* sent and whether there are any trusted responders in place.
* char *location
* The location of the OCSP responder (a URL).
* PRTime time
* Indicates the time for which the certificate status is to be
* determined -- this may be used in the search for the cert's issuer
* but has no other bearing on the operation.
* PRBool addServiceLocator
* If true, the Service Locator extension should be added to the
* single request(s) for each cert.
* CERTCertificate *signerCert
* If non-NULL, means sign the request using this cert. Otherwise,
* do not sign.
* void *pwArg
* Pointer to argument for password prompting, if needed. (Definitely
* not needed if not signing.)
* OUTPUTS:
* CERTOCSPRequest **pRequest
* Pointer in which to store the OCSP request created for the given
* list of certificates. It is only filled in if the entire operation
* is successful and the pointer is not null -- and in that case the
* caller is then reponsible for destroying it.
* RETURN:
* Returns a pointer to the SECItem holding the response.
* On error, returns null with error set describing the reason:
* SEC_ERROR_UNKNOWN_ISSUER
* SEC_ERROR_CERT_BAD_ACCESS_LOCATION
* SEC_ERROR_OCSP_BAD_HTTP_RESPONSE
* Other errors are low-level problems (no memory, bad database, etc.).
*/
extern SECItem *
CERT_GetEncodedOCSPResponse(PLArenaPool *arena, CERTCertList *certList,
char *location, PRTime time,
PRBool addServiceLocator,
CERTCertificate *signerCert, void *pwArg,
CERTOCSPRequest **pRequest);
/*
* FUNCTION: CERT_VerifyOCSPResponseSignature
* Check the signature on an OCSP Response. Will also perform a
* verification of the signer's certificate. Note, however, that a
* successful verification does not make any statement about the
* signer's *authority* to provide status for the certificate(s),
* that must be checked individually for each certificate.
* INPUTS:
* CERTOCSPResponse *response
* Pointer to response structure with signature to be checked.
* CERTCertDBHandle *handle
* Pointer to CERTCertDBHandle for certificate DB to use for verification.
* void *pwArg
* Pointer to argument for password prompting, if needed.
* CERTCertificate *issuerCert
* Issuer of the certificate that generated the OCSP request.
* OUTPUTS:
* CERTCertificate **pSignerCert
* Pointer in which to store signer's certificate; only filled-in if
* non-null.
* RETURN:
* Returns SECSuccess when signature is valid, anything else means invalid.
* Possible errors set:
* SEC_ERROR_OCSP_MALFORMED_RESPONSE - unknown type of ResponderID
* SEC_ERROR_INVALID_TIME - bad format of "ProducedAt" time
* SEC_ERROR_UNKNOWN_SIGNER - signer's cert could not be found
* SEC_ERROR_BAD_SIGNATURE - the signature did not verify
* Other errors are any of the many possible failures in cert verification
* (e.g. SEC_ERROR_REVOKED_CERTIFICATE, SEC_ERROR_UNTRUSTED_ISSUER) when
* verifying the signer's cert, or low-level problems (no memory, etc.)
*/
extern SECStatus
CERT_VerifyOCSPResponseSignature(CERTOCSPResponse *response,
CERTCertDBHandle *handle, void *pwArg,
CERTCertificate **pSignerCert,
CERTCertificate *issuerCert);
/*
* FUNCTION: CERT_GetOCSPAuthorityInfoAccessLocation
* Get the value of the URI of the OCSP responder for the given cert.
* This is found in the (optional) Authority Information Access extension
* in the cert.
* INPUTS:
* CERTCertificate *cert
* The certificate being examined.
* RETURN:
* char *
* A copy of the URI for the OCSP method, if found. If either the
* extension is not present or it does not contain an entry for OCSP,
* SEC_ERROR_EXTENSION_NOT_FOUND will be set and a NULL returned.
* Any other error will also result in a NULL being returned.
*
* This result should be freed (via PORT_Free) when no longer in use.
*/
extern char *
CERT_GetOCSPAuthorityInfoAccessLocation(CERTCertificate *cert);
/*
* FUNCTION: CERT_RegisterAlternateOCSPAIAInfoCallBack
* This function serves two purposes.
* 1) It registers the address of a callback function that will be
* called for certs that have no OCSP AIA extension, to see if the
* callback wishes to supply an alternative URL for such an OCSP inquiry.
* 2) It outputs the previously registered function's address to the
* address supplied by the caller, unless that is NULL.
* The registered callback function returns NULL, or an allocated string
* that may be subsequently freed by calling PORT_Free().
* RETURN:
* SECSuccess or SECFailure (if the library is not yet intialized)
*/
extern SECStatus
CERT_RegisterAlternateOCSPAIAInfoCallBack(
CERT_StringFromCertFcn newCallback,
CERT_StringFromCertFcn * oldCallback);
/*
* FUNCTION: CERT_ParseURL
* Parse the URI of a OCSP responder into hostname, port, and path.
* INPUTS:
* const char *location
* The URI to be parsed
* OUTPUTS:
* char *pHostname
* Pointer to store the hostname obtained from the URI.
* This result should be freed (via PORT_Free) when no longer in use.
* PRUint16 *pPort
* Pointer to store the port number obtained from the URI.
* char *pPath
* Pointer to store the path obtained from the URI.
* This result should be freed (via PORT_Free) when no longer in use.
* RETURN:
* Returns SECSuccess when parsing was successful. Anything else means
* problems were encountered.
*
*/
extern SECStatus
CERT_ParseURL(const char *url, char **pHostname, PRUint16 *pPort, char **pPath);
/*
* FUNCTION: CERT_CheckOCSPStatus
* Checks the status of a certificate via OCSP. Will only check status for
* a certificate that has an AIA (Authority Information Access) extension
* for OCSP *or* when a "default responder" is specified and enabled.
* (If no AIA extension for OCSP and no default responder in place, the
* cert is considered to have a good status and SECSuccess is returned.)
* INPUTS:
* CERTCertDBHandle *handle
* certificate DB of the cert that is being checked
* CERTCertificate *cert
* the certificate being checked
* XXX in the long term also need a boolean parameter that specifies
* whether to check the cert chain, as well; for now we check only
* the leaf (the specified certificate)
* PRTime time
* time for which status is to be determined
* void *pwArg
* argument for password prompting, if needed
* RETURN:
* Returns SECSuccess if an approved OCSP responder "knows" the cert
* *and* returns a non-revoked status for it; SECFailure otherwise,
* with an error set describing the reason:
*
* SEC_ERROR_OCSP_BAD_HTTP_RESPONSE
* SEC_ERROR_OCSP_FUTURE_RESPONSE
* SEC_ERROR_OCSP_MALFORMED_REQUEST
* SEC_ERROR_OCSP_MALFORMED_RESPONSE
* SEC_ERROR_OCSP_OLD_RESPONSE
* SEC_ERROR_OCSP_REQUEST_NEEDS_SIG
* SEC_ERROR_OCSP_SERVER_ERROR
* SEC_ERROR_OCSP_TRY_SERVER_LATER
* SEC_ERROR_OCSP_UNAUTHORIZED_REQUEST
* SEC_ERROR_OCSP_UNAUTHORIZED_RESPONSE
* SEC_ERROR_OCSP_UNKNOWN_CERT
* SEC_ERROR_OCSP_UNKNOWN_RESPONSE_STATUS
* SEC_ERROR_OCSP_UNKNOWN_RESPONSE_TYPE
*
* SEC_ERROR_BAD_SIGNATURE
* SEC_ERROR_CERT_BAD_ACCESS_LOCATION
* SEC_ERROR_INVALID_TIME
* SEC_ERROR_REVOKED_CERTIFICATE
* SEC_ERROR_UNKNOWN_ISSUER
* SEC_ERROR_UNKNOWN_SIGNER
*
* Other errors are any of the many possible failures in cert verification
* (e.g. SEC_ERROR_REVOKED_CERTIFICATE, SEC_ERROR_UNTRUSTED_ISSUER) when
* verifying the signer's cert, or low-level problems (error allocating
* memory, error performing ASN.1 decoding, etc.).
*/
extern SECStatus
CERT_CheckOCSPStatus(CERTCertDBHandle *handle, CERTCertificate *cert,
PRTime time, void *pwArg);
/*
* FUNCTION: CERT_GetOCSPStatusForCertID
* Returns the OCSP status contained in the passed in paramter response
* that corresponds to the certID passed in.
* INPUTS:
* CERTCertDBHandle *handle
* certificate DB of the cert that is being checked
* CERTOCSPResponse *response
* the OCSP response we want to retrieve status from.
* CERTOCSPCertID *certID
* the ID we want to look for from the response.
* CERTCertificate *signerCert
* the certificate that was used to sign the OCSP response.
* must be obtained via a call to CERT_VerifyOCSPResponseSignature.
* PRTime time
* The time at which we're checking the status for.
* RETURN:
* Return values are the same as those for CERT_CheckOCSPStatus
*/
extern SECStatus
CERT_GetOCSPStatusForCertID(CERTCertDBHandle *handle,
CERTOCSPResponse *response,
CERTOCSPCertID *certID,
CERTCertificate *signerCert,
PRTime time);
/*
* FUNCTION CERT_GetOCSPResponseStatus
* Returns the response status for the response passed.
* INPUTS:
* CERTOCSPResponse *response
* The response to query for status
* RETURN:
* Returns SECSuccess if the response has a successful status value.
* Otherwise it returns SECFailure and sets one of the following error
* codes via PORT_SetError
* SEC_ERROR_OCSP_MALFORMED_REQUEST
* SEC_ERROR_OCSP_SERVER_ERROR
* SEC_ERROR_OCSP_TRY_SERVER_LATER
* SEC_ERROR_OCSP_REQUEST_NEEDS_SIG
* SEC_ERROR_OCSP_UNAUTHORIZED_REQUEST
* SEC_ERROR_OCSP_UNKNOWN_RESPONSE_STATUS
*/
extern SECStatus
CERT_GetOCSPResponseStatus(CERTOCSPResponse *response);
/*
* FUNCTION CERT_CreateOCSPCertID
* Returns the OCSP certID for the certificate passed in.
* INPUTS:
* CERTCertificate *cert
* The certificate for which to create the certID for.
* PRTime time
* The time at which the id is requested for. This is used
* to determine the appropriate issuer for the cert since
* the issuing CA may be an older expired certificate.
* RETURN:
* A new copy of a CERTOCSPCertID*. The memory for this certID
* should be freed by calling CERT_DestroyOCSPCertID when the
* certID is no longer necessary.
*/
extern CERTOCSPCertID*
CERT_CreateOCSPCertID(CERTCertificate *cert, PRTime time);
/*
* FUNCTION: CERT_DestroyOCSPCertID
* Frees the memory associated with the certID passed in.
* INPUTS:
* CERTOCSPCertID* certID
* The certID that the caller no longer needs and wants to
* free the associated memory.
* RETURN:
* SECSuccess if freeing the memory was successful. Returns
* SECFailure if the memory passed in was not allocated with
* a call to CERT_CreateOCSPCertID.
*/
extern SECStatus
CERT_DestroyOCSPCertID(CERTOCSPCertID* certID);
/************************************************************************/
SEC_END_PROTOS
#endif /* _OCSP_H_ */