RetroZilla/security/nss/tests/iopr/cert_iopr.sh

438 lines
15 KiB
Bash
Raw Normal View History

2015-10-21 05:03:22 +02:00
#! /bin/sh
#
# ***** BEGIN LICENSE BLOCK *****
# Version: MPL 1.1/GPL 2.0/LGPL 2.1
#
# The contents of this file are subject to the Mozilla Public License Version
# 1.1 (the "License"); you may not use this file except in compliance with
# the License. You may obtain a copy of the License at
# http://www.mozilla.org/MPL/
#
# Software distributed under the License is distributed on an "AS IS" basis,
# WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
# for the specific language governing rights and limitations under the
# License.
#
# The Original Code is the Netscape security libraries.
#
# The Initial Developer of the Original Code is
# Netscape Communications Corporation.
# Portions created by the Initial Developer are Copyright (C) 1994-2000
# the Initial Developer. All Rights Reserved.
#
# Alternatively, the contents of this file may be used under the terms of
# either the GNU General Public License Version 2 or later (the "GPL"), or
# the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
# in which case the provisions of the GPL or the LGPL are applicable instead
# of those above. If you wish to allow use of your version of this file only
# under the terms of either the GPL or the LGPL, and not to allow others to
# use your version of this file under the terms of the MPL, indicate your
# decision by deleting the provisions above and replace them with the notice
# and other provisions required by the GPL or the LGPL. If you do not delete
# the provisions above, a recipient may use your version of this file under
# the terms of any one of the MPL, the GPL or the LGPL.
#
# ***** END LICENSE BLOCK *****
########################################################################
#
# mozilla/security/nss/tests/iopr/cert_iopr.sh
#
# Certificate generating and handeling for NSS interoperability QA. This file
# is included from cert.sh
#
# needs to work on all Unix and Windows platforms
#
# special strings
# ---------------
# FIXME ... known problems, search for this string
# NOTE .... unexpected behavior
#
# FIXME - Netscape - NSS
########################################################################
IOPR_CERT_SOURCED=1
########################################################################
# function wraps calls to pk12util, also: writes action and options
# to stdout.
# Params are the same as to pk12util.
# Returns pk12util status
#
pk12u()
{
echo "${CU_ACTION} --------------------------"
echo "pk12util $@"
${BINDIR}/pk12util $@
RET=$?
return $RET
}
########################################################################
# Initializes nss db directory and files if they don't exists
# Params:
# $1 - directory location
#
createDBDir() {
trgDir=$1
if [ -z "`ls $trgDir | grep db`" ]; then
trgDir=`cd ${trgDir}; pwd`
if [ "${OS_ARCH}" = "WINNT" -a "$OS_NAME" = "CYGWIN_NT" ]; then
trgDir=`cygpath -m ${trgDir}`
fi
CU_ACTION="Initializing DB at ${trgDir}"
certu -N -d "${trgDir}" -f "${R_PWFILE}" 2>&1
if [ "$RET" -ne 0 ]; then
return $RET
fi
CU_ACTION="Loading root cert module to Cert DB at ${trgDir}"
modu -add "RootCerts" -libfile "${ROOTCERTSFILE}" -dbdir "${trgDir}" 2>&1
if [ "$RET" -ne 0 ]; then
return $RET
fi
fi
}
########################################################################
# takes care of downloading config, cert and crl files from remote
# location.
# Params:
# $1 - name of the host file will be downloaded from
# $2 - path to the file as it appeared in url
# $3 - target directory the file will be saved at.
# Returns tstclnt status.
#
download_file() {
host=$1
filePath=$2
trgDir=$3
file=$trgDir/`basename $filePath`
createDBDir $trgDir || return $RET
# echo wget -O $file http://${host}${filePath}
# wget -O $file http://${host}${filePath}
# ret=$?
req=$file.$$
echo "GET $filePath HTTP/1.0" > $req
echo >> $req
echo ${BINDIR}/tstclnt -d $trgDir -S -h $host -p $IOPR_DOWNLOAD_PORT \
-v -w ${R_PWFILE} -o
${BINDIR}/tstclnt -d $trgDir -S -h $host -p $IOPR_DOWNLOAD_PORT \
-v -w ${R_PWFILE} -o < $req > $file
ret=$?
rm -f $_tmp;
return $ret
}
########################################################################
# Uses pk12util, certutil of cerlutil to import files to an nss db located
# at <dir>(the value of $1 parameter). Chooses a utility to use based on
# a file extension. Initializing a db if it does not exists.
# Params:
# $1 - db location directory
# $2 - file name to import
# $3 - nick name an object in the file will be associated with
# $4 - trust arguments
# Returns status of import
#
importFile() {
dir=$1\
file=$2
certName=$3
certTrust=$4
[ ! -d $dir ] && mkdir -p $dir;
createDBDir $dir || return $RET
case `basename $file | sed 's/^.*\.//'` in
p12)
CU_ACTION="Importing p12 $file to DB at $dir"
pk12u -d $dir -i $file -k ${R_PWFILE} -W iopr
[ $? -ne 0 ] && return 1
CU_ACTION="Modifying trust for cert $certName at $dir"
certu -M -n "$certName" -t "$certTrust" -f "${R_PWFILE}" -d "${dir}"
return $?
;;
crl)
CU_ACTION="Importing crl $file to DB at $dir"
crlu -d ${dir} -I -n TestCA -i $file
return $?
;;
crt | cert)
CU_ACTION="Importing cert $certName with trust $certTrust to $dir"
certu -A -n "$certName" -t "$certTrust" -f "${R_PWFILE}" -d "${dir}" \
-i "$file"
return $?
;;
*)
echo "Unknown file extension: $file:"
return 1
;;
esac
}
#########################################################################
# Downloads and installs test certs and crl from a remote webserver.
# Generates server cert for reverse testing if reverse test run is turned on.
# Params:
# $1 - host name to download files from.
# $2 - directory at which CA cert will be installed and used for
# signing a server cert.
# $3 - path to a config file in webserver context.
# $4 - ssl server db location
# $5 - ssl client db location
# $5 - ocsp client db location
#
# Returns 0 upon success, otherwise, failed command error code.
#
download_install_certs() {
host=$1
caDir=$2
confPath=$3
sslServerDir=$4
sslClientDir=$5
ocspClientDir=$6
[ ! -d "$caDir" ] && mkdir -p $caDir;
#=======================================================
# Getting config file
#
download_file $host "$confPath/iopr_server.cfg" $caDir
RET=$?
if [ $RET -ne 0 -o ! -f $caDir/iopr_server.cfg ]; then
html_failed "Fail to download website config file(ws: $host)"
return 1
fi
. $caDir/iopr_server.cfg
RET=$?
if [ $RET -ne 0 ]; then
html_failed "Fail to source config file(ws: $host)"
return $RET
fi
#=======================================================
# Getting CA file
#
#----------------- !!!WARNING!!! -----------------------
# Do NOT copy this scenario. CA should never accompany its
# cert with the private key when deliver cert to a customer.
#----------------- !!!WARNING!!! -----------------------
download_file $host $certDir/$caCertName.p12 $caDir
RET=$?
if [ $RET -ne 0 -o ! -f $caDir/$caCertName.p12 ]; then
html_failed "Fail to download $caCertName cert(ws: $host)"
return 1
fi
tmpFiles="$caDir/$caCertName.p12"
importFile $caDir $caDir/$caCertName.p12 $caCertName "TC,C,C"
RET=$?
if [ $RET -ne 0 ]; then
html_failed "Fail to import $caCertName cert to CA DB(ws: $host)"
return $RET
fi
CU_ACTION="Exporting Root CA cert(ws: $host)"
certu -L -n $caCertName -r -d ${caDir} -o $caDir/$caCertName.cert
if [ "$RET" -ne 0 ]; then
Exit 7 "Fatal - failed to export $caCertName cert"
fi
#=======================================================
# Check what tests we want to run
#
doSslTests=0; doOcspTests=0
# XXX remove "_new" from variables below
[ -n "`echo ${supportedTests_new} | grep -i ssl`" ] && doSslTests=1
[ -n "`echo ${supportedTests_new} | grep -i ocsp`" ] && doOcspTests=1
if [ $doSslTests -eq 1 ]; then
if [ "$reverseRunCGIScript" ]; then
[ ! -d "$sslServerDir" ] && mkdir -p $sslServerDir;
#=======================================================
# Import CA cert to server DB
#
importFile $sslServerDir $caDir/$caCertName.cert server-client-CA \
"TC,C,C"
RET=$?
if [ $RET -ne 0 ]; then
html_failed "Fail to import server-client-CA cert to \
server DB(ws: $host)"
return $RET
fi
#=======================================================
# Creating server cert
#
CERTNAME=$HOSTADDR
CU_ACTION="Generate Cert Request for $CERTNAME (ws: $host)"
CU_SUBJECT="CN=$CERTNAME, E=${CERTNAME}@bogus.com, O=BOGUS NSS, \
L=Mountain View, ST=California, C=US"
certu -R -d "${sslServerDir}" -f "${R_PWFILE}" -z "${R_NOISE_FILE}"\
-o $sslServerDir/req 2>&1
tmpFiles="$tmpFiles $sslServerDir/req"
# NOTE:
# For possible time synchronization problems (bug 444308) we generate
# certificates valid also some time in past (-w -1)
CU_ACTION="Sign ${CERTNAME}'s Request (ws: $host)"
certu -C -c "$caCertName" -m `date +"%s"` -v 60 -w -1 \
-d "${caDir}" \
-i ${sslServerDir}/req -o $caDir/${CERTNAME}.cert \
-f "${R_PWFILE}" 2>&1
importFile $sslServerDir $caDir/$CERTNAME.cert $CERTNAME ",,"
RET=$?
if [ $RET -ne 0 ]; then
html_failed "Fail to import $CERTNAME cert to server\
DB(ws: $host)"
return $RET
fi
tmpFiles="$tmpFiles $caDir/$CERTNAME.cert"
#=======================================================
# Download and import CA crl to server DB
#
download_file $host "$certDir/$caCrlName.crl" $sslServerDir
RET=$?
if [ $? -ne 0 ]; then
html_failed "Fail to download $caCertName crl\
(ws: $host)"
return $RET
fi
tmpFiles="$tmpFiles $sslServerDir/$caCrlName.crl"
importFile $sslServerDir $sslServerDir/TestCA.crl
RET=$?
if [ $RET -ne 0 ]; then
html_failed "Fail to import TestCA crt to server\
DB(ws: $host)"
return $RET
fi
fi # if [ "$reverseRunCGIScript" ]
[ ! -d "$sslClientDir" ] && mkdir -p $sslClientDir;
#=======================================================
# Import CA cert to ssl client DB
#
importFile $sslClientDir $caDir/$caCertName.cert server-client-CA \
"TC,C,C"
RET=$?
if [ $RET -ne 0 ]; then
html_failed "Fail to import server-client-CA cert to \
server DB(ws: $host)"
return $RET
fi
fi
if [ $doOcspTests -eq 1 ]; then
[ ! -d "$ocspClientDir" ] && mkdir -p $ocspClientDir;
#=======================================================
# Import CA cert to ocsp client DB
#
importFile $ocspClientDir $caDir/$caCertName.cert server-client-CA \
"TC,C,C"
RET=$?
if [ $RET -ne 0 ]; then
html_failed "Fail to import server-client-CA cert to \
server DB(ws: $host)"
return $RET
fi
fi
#=======================================================
# Import client certs to client DB
#
for fileName in $downloadFiles; do
certName=`echo $fileName | sed 's/\..*//'`
if [ -n "`echo $certName | grep ocsp`" -a $doOcspTests -eq 1 ]; then
clientDir=$ocspClientDir
elif [ $doSslTests -eq 1 ]; then
clientDir=$sslClientDir
else
continue
fi
download_file $host "$certDir/$fileName" $clientDir
RET=$?
if [ $RET -ne 0 -o ! -f $clientDir/$fileName ]; then
html_failed "Fail to download $certName cert(ws: $host)"
return $RET
fi
tmpFiles="$tmpFiles $clientDir/$fileName"
importFile $clientDir $clientDir/$fileName $certName ",,"
RET=$?
if [ $RET -ne 0 ]; then
html_failed "Fail to import $certName cert to client DB\
(ws: $host)"
return $RET
fi
done
rm -f $tmpFiles
return 0
}
#########################################################################
# Initial point for downloading config, cert, crl files for multiple hosts
# involved in interoperability testing. Called from nss/tests/cert/cert.sh
# It will only proceed with downloading if environment variable
# IOPR_HOSTADDR_LIST is set and has a value of host names separated by space.
#
# Returns 1 if interoperability testing is off, 0 otherwise.
#
cert_iopr_setup() {
if [ "$IOPR" -ne 1 ]; then
return 1
fi
num=1
IOPR_HOST_PARAM=`echo "${IOPR_HOSTADDR_LIST} " | cut -f 1 -d' '`
while [ "$IOPR_HOST_PARAM" ]; do
IOPR_HOSTADDR=`echo $IOPR_HOST_PARAM | cut -f 1 -d':'`
IOPR_DOWNLOAD_PORT=`echo "$IOPR_HOST_PARAM:" | cut -f 2 -d':'`
[ -z "$IOPR_DOWNLOAD_PORT" ] && IOPR_DOWNLOAD_PORT=443
IOPR_CONF_PATH=`echo "$IOPR_HOST_PARAM:" | cut -f 3 -d':'`
[ -z "$IOPR_CONF_PATH" ] && IOPR_CONF_PATH="/iopr"
echo "Installing certs for $IOPR_HOSTADDR:$IOPR_DOWNLOAD_PORT:\
$IOPR_CONF_PATH"
download_install_certs ${IOPR_HOSTADDR} ${IOPR_CADIR}_${IOPR_HOSTADDR} \
${IOPR_CONF_PATH} ${IOPR_SSL_SERVERDIR}_${IOPR_HOSTADDR} \
${IOPR_SSL_CLIENTDIR}_${IOPR_HOSTADDR} \
${IOPR_OCSP_CLIENTDIR}_${IOPR_HOSTADDR}
if [ $? -ne 0 ]; then
echo "wsFlags=\"NOIOPR $wsParam\"" >> \
${IOPR_CADIR}_${IOPR_HOSTADDR}/iopr_server.cfg
fi
num=`expr $num + 1`
IOPR_HOST_PARAM=`echo "${IOPR_HOSTADDR_LIST} " | cut -f $num -d' '`
done
return 0
}