RetroZilla/security/nss/tests/libpkix/common/libpkix_init.sh

358 lines
10 KiB
Bash
Raw Normal View History

2015-10-21 05:03:22 +02:00
#!/bin/sh
#
# ***** BEGIN LICENSE BLOCK *****
# Version: MPL 1.1/GPL 2.0/LGPL 2.1
#
# The contents of this file are subject to the Mozilla Public License Version
# 1.1 (the "License"); you may not use this file except in compliance with
# the License. You may obtain a copy of the License at
# http://www.mozilla.org/MPL/
#
# Software distributed under the License is distributed on an "AS IS" basis,
# WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
# for the specific language governing rights and limitations under the
# License.
#
# The Original Code is the PKIX-C library.
#
# The Initial Developer of the Original Code is
# Sun Microsystems, Inc.
# Portions created by the Initial Developer are
# Copyright 2004-2007 Sun Microsystems, Inc. All Rights Reserved.
#
# Contributor(s):
# Sun Microsystems, Inc.
#
# Alternatively, the contents of this file may be used under the terms of
# either the GNU General Public License Version 2 or later (the "GPL"), or
# the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
# in which case the provisions of the GPL or the LGPL are applicable instead
# of those above. If you wish to allow use of your version of this file only
# under the terms of either the GPL or the LGPL, and not to allow others to
# use your version of this file under the terms of the MPL, indicate your
# decision by deleting the provisions above and replace them with the notice
# and other provisions required by the GPL or the LGPL. If you do not delete
# the provisions above, a recipient may use your version of this file under
# the terms of any one of the MPL, the GPL or the LGPL.
#
# ***** END LICENSE BLOCK *****
#
# libpkix_init.sh
#
### when the script is exiting, handle it in the Cleanup routine...the result
### value will get set to 0 if all the tests completed successfully, so we can
### use that value in the handler
trap 'Cleanup' EXIT
result=1
checkmem=0
arenas=0
quiet=0
doNIST=1
doNIST_PDTest=0
doPD=0
doTop=0
doModule=0
doPki=0
doOCSP=0
doOCSPTest=0
combinedErrors=0
totalErrors=0
prematureTermination=0
errors=0
if [ -z "${INIT_SOURCED}" ] ; then
libpkixCommondir=`pwd`
cd ../../common
. ./init.sh > /dev/null
cd ${libpkixCommondir}
fi
DIST_BIN=${DIST}/${OBJDIR}/bin
### setup some defaults
WD=`pwd`
prog=`basename $0`
testOut=${HOSTDIR}/${prog}.$$
testOutMem=${HOSTDIR}/${prog}_mem.$$
####################
# cleanup from tests
####################
Cleanup()
{
if [ ${testOut} != "" ]; then
rm -f ${testOut}
fi
if [ ${testOutMem} != "" ]; then
rm -f ${testOutMem}
fi
if [ -d ../../nist_pkits/certs ]; then
rm -f ../../nist_pkits/certs
fi
if [ ${doTop} -eq 1 ]; then
for i in ${linkMStoreNistFiles}; do
if [ -f ${HOSTDIR}/rev_data/multiple_certstores/$i ]; then
rm -f ${HOSTDIR}/rev_data/multiple_certstores/$i
fi
done
if [ -d ${HOSTDIR}/rev_data/multiple_certstores ]; then
rm -fr ${HOSTDIR}/rev_data/multiple_certstores
fi
fi
if [ ${doModule} -eq 1 ]; then
for i in ${linkModuleNistFiles}; do
if [ -f ${HOSTDIR}/rev_data/local/$i ]; then
rm -f ${HOSTDIR}/rev_data/local/$i
fi
done
for i in ${localCRLFiles}; do
if [ -f ${HOSTDIR}/rev_data/local/$i ]; then
rm -f ${HOSTDIR}/rev_data/local/$i
fi
done
fi
if [ ${doPki} -eq 1 ]; then
for i in ${linkPkiNistFiles}; do
if [ -f ${HOSTDIR}/rev_data/local/$i ]; then
rm -f ${HOSTDIR}/rev_data/local/$i
fi
done
fi
return ${result}
}
### ParseArgs
ParseArgs() # args
{
while [ $# -gt 0 ]; do
if [ $1 = "-checkmem" ]; then
checkmem=1
elif [ $1 = "-quiet" ]; then
quiet=1
elif [ $1 = "-arenas" ]; then
arenas=1
fi
shift
done
}
Display() # string
{
if [ ${quiet} -eq 0 ]; then
echo "$1"
fi
}
testHeadingEcho()
{
echo "*******************************************************************************"
echo "START OF TESTS FOR ${testunit}${memText}"
echo "*******************************************************************************"
echo ""
}
testEndingEcho()
{
if [ ${totalErrors} -eq 0 ]; then
echo ""
echo "************************************************************"
echo "END OF TESTS FOR ${testunit}: ALL TESTS COMPLETED SUCCESSFULLY"
echo "************************************************************"
echo ""
return 0
fi
if [ ${totalErrors} -eq 1 ]; then
plural=""
else
plural="S"
fi
echo ""
echo "************************************************************"
echo "END OF TESTS FOR ${testunit}: ${totalErrors} TEST${plural} FAILED"
echo "************************************************************"
echo ""
return ${totalErrors}
}
###########
# RunTests
###########
RunTests()
{
errors=0
memErrors=0
prematureErrors=0
failedpgms=""
failedmempgms=""
failedprematurepgms=""
memText=""
arenaCmd=""
if [ ${checkmem} -eq 1 ]; then
memText=" (Memory Checking Enabled)"
fi
if [ ${arenas} -eq 1 ]; then
arenaCmd="-arenas"
fi
#
# Announce start of tests
#
Display "*******************************************************************************"
Display "START OF TESTS FOR PKIX ${testunit} ${memText}"
Display "*******************************************************************************"
Display ""
# run each test specified by the input redirection below
while read testPgm args; do
shortTestPurpose=`echo $args | awk '{print $1 " " $2 " "}'`
fullTestPurpose=${args}
if [ ${doTop} -eq 1 -o ${doModule} -eq 1 -o ${doPki} -eq 1 ]; then
testPurpose=${shortTestPurpose}
else
testPurpose=${fullTestPurpose}
fi
# If we want shorter command printout for NIST tests, delete next line
testPurpose=${fullTestPurpose}
# Skip OCSP tests if OCSP is not defined in the environment
if [ ${doOCSPTest} -eq 0 ]; then
hasOCSP=`echo ${args} | grep OCSP-Test`
if [ ! -z "${hasOCSP}" ]; then
Display "SKIPPING ${testPgm} ${testPurpose}"
continue
fi
fi
if [ ${doNIST} -eq 0 ]; then
hasNIST=`echo ${args} | grep NIST-Test`
if [ ! -z "${hasNIST}" ]; then
Display "SKIPPING ${testPgm} ${testPurpose}"
continue
fi
fi
# This "if" is not reached when doNIST is not set. The assumption
# is that NIST tests are basic, NIST Path Discovery tests are
# additional
if [ ${doNIST_PDTest} -eq 0 ]; then
hasNIST=`echo ${args} | grep NIST-PDTest`
if [ ! -z "${hasNIST}" ]; then
Display "SKIPPING ${testPgm} ${testPurpose}"
continue
fi
fi
Display "RUNNING ${testPgm} ${arenaCmd} ${testPurpose}"
numtests=`expr ${numtests} + 1`
if [ ${checkmem} -eq 1 ]; then
dbx -C -c "runargs ${arenaCmd} ${args};check -all;run;exit" ${DIST_BIN}/${testPgm} > ${testOut} 2>&1
else
${DIST_BIN}/${testPgm} ${arenaCmd} ${args} > ${testOut} 2>&1
fi
# Examine output file to see if test failed and keep track of number
# of failures and names of failed tests. This assumes that the test
# uses our utility library for displaying information
cat ${testOut} | tail -2 | grep "COMPLETED SUCCESSFULLY" >/dev/null 2>&1
if [ $? -ne 0 ]; then
testFail=1
errors=`expr ${errors} + 1`
failedpgms="${failedpgms}\n${testPgm} ${testPurpose} "
# cat ${testOut}
else
testFail=0
passed=`expr ${passed} + 1`
fi
cat ${testOut}
html_msg ${testFail} 0 "${testPgm} ${arenaCmd} ${shortTestPurpose}"
if [ ${checkmem} -eq 1 ]; then
grep "(actual leaks:" ${testOut} > ${testOutMem} 2>&1
if [ $? -ne 0 ]; then
prematureErrors=`expr ${prematureErrors} + 1`
failedprematurepgms="${failedprematurepgms}${testPgm} "
Display "...program terminated prematurely (unable to check for memory leak errors) ..."
else
#grep "(actual leaks: 0" ${testOut} > /dev/null 2>&1
# special consideration for memory leak in NSS_NoDB_Init
grep "(actual leaks: 1 total size: 4 bytes)" ${testOut} > /dev/null 2>&1
if [ $? -ne 0 ]; then
memErrors=`expr ${memErrors} + 1`
failedmempgms="${failedmempgms}${testPgm} "
cat ${testOutMem}
fi
fi
fi
done
if [ ${errors} -eq 0 ]; then
if [ ${memErrors} -eq 0 ]; then
Display ""
Display "************************************************************"
Display "END OF TESTS FOR PKIX ${testunit}: ALL TESTS COMPLETED SUCCESSFULLY"
Display "************************************************************"
Display ""
return 0
fi
fi
if [ ${errors} -eq 1 ]; then
plural=""
else
plural="S"
fi
Display ""
Display "*******************************************************************************"
Display "END OF TESTS FOR PKIX ${testunit}: ${errors} UNIT TEST${plural} FAILED: ${failedpgms}"
Display ""
if [ ${checkmem} -eq 1 ]; then
if [ ${memErrors} -eq 1 ]; then
memPlural=""
else
memPlural="S"
fi
Display " ${memErrors} MEMORY LEAK TEST${memPlural} FAILED: ${failedmempgms}"
if [ ${prematureErrors} -ne 0 ]; then
if [ ${prematureErrors} -eq 1 ]; then
prematurePlural=""
else
prematurePlural="S"
fi
Display " ${prematureErrors} MEMORY LEAK TEST${prematurePlural} INDETERMINATE: ${failedprematurepgms}"
fi
fi
Display "*******************************************************************************"
Display ""
combinedErrors=`expr ${errors} + ${memErrors} + ${prematureErrors}`
return ${combinedErrors}
}