RetroZilla/mailnews/compose/public/nsIMsgSend.idl

/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/* ***** BEGIN LICENSE BLOCK *****
 * Version: MPL 1.1/GPL 2.0/LGPL 2.1
 *
 * The contents of this file are subject to the Mozilla Public License Version
 * 1.1 (the "License"); you may not use this file except in compliance with
 * the License. You may obtain a copy of the License at
 * http://www.mozilla.org/MPL/
 *
 * Software distributed under the License is distributed on an "AS IS" basis,
 * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
 * for the specific language governing rights and limitations under the
 * License.
 *
 * The Original Code is mozilla.org code.
 *
 * The Initial Developer of the Original Code is
 * Netscape Communications Corporation.
 * Portions created by the Initial Developer are Copyright (C) 1998
 * the Initial Developer. All Rights Reserved.
 *
 * Contributor(s):
 *
 * Alternatively, the contents of this file may be used under the terms of
 * either of the GNU General Public License Version 2 or later (the "GPL"),
 * or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
 * in which case the provisions of the GPL or the LGPL are applicable instead
 * of those above. If you wish to allow use of your version of this file only
 * under the terms of either the GPL or the LGPL, and not to allow others to
 * use your version of this file under the terms of the MPL, indicate your
 * decision by deleting the provisions above and replace them with the notice
 * and other provisions required by the GPL or the LGPL. If you do not delete
 * the provisions above, a recipient may use your version of this file under
 * the terms of any one of the MPL, the GPL or the LGPL.
 *
 * ***** END LICENSE BLOCK ***** */

/*
 * The nsIMsgSend method will create an RFC822 message and send it all in one operation 
 * as well as providing the ability to save disk files for later use. The mode of delivery 
 * can also be specified for the "Send Later", "Drafts" and "Templates" operations. (NOTE: 
 * This method could easily be broken in to a few different calls. Currently, this method 
 * does several functions depending on the arguments passed in, but this could easily lead 
 * to confusion. This is something that very well may change as time allows). 
 */
#include "nsISupports.idl"
#include "nsISupportsArray.idl"
#include "nsrootidl.idl"
#include "nsIMsgIdentity.idl"
#include "nsIMsgCompFields.idl"
#include "nsIMsgSendListener.idl"
#include "nsIMsgSendReport.idl"
#include "domstubs.idl"
#include "nsIPrompt.idl"
#include "MailNewsTypes2.idl"
#include "nsIMsgComposeParams.idl"

%{C++
#include "nsIURL.h"
#include "nsString.h"
class nsFileSpec;
class nsOutputFileStream;
%}

interface nsIMsgProgress;
interface nsIURI;
interface nsIRequest;
interface nsIMsgDBHdr;
interface nsIMsgHdr;
interface nsIDocShell;
interface nsIFileSpec;
interface nsIMsgComposeSecure;
interface nsIMsgStatusFeedback;
interface nsIEditor;

typedef long nsMsgDeliverMode;

%{ C++
//
// Callback declarations for message delivery
//
// For completion of send/message creation operations...
typedef nsresult (*nsMsgSendCompletionCallback) (nsresult aExitCode, void *tagData, nsFileSpec *returnFileSpec);

// For completion of sending unsent messages operations...
typedef nsresult (*nsMsgSendUnsentMessagesCallback) (nsresult aExitCode, PRUint32 totalSentCount,
                                                     PRUint32 totalSentSuccessfully, void *tagData);
%}

%{ C++
// Forward declaration
class nsMsgAttachmentHandler;

// Attachment file/URL structures
struct nsMsgAttachmentData
{
  nsIURI* url;			      // The URL to attach. This should be 0 to signify "end of list".

  char *desired_type;	    // The type to which this document should be
						              // converted.  Legal values are NULL, TEXT_PLAIN
						              // and APPLICATION_POSTSCRIPT (which are macros
                          // defined in net.h); other values are ignored.

  char *real_type;		    // The type of the URL if known, otherwise NULL. For example, if 
                          // you were attaching a temp file which was known to contain HTML data, 
                          // you would pass in TEXT_HTML as the real_type, to override whatever type 
                          // the name of the tmp file might otherwise indicate.

  char *real_encoding;	  // Goes along with real_type 

  char *real_name;		    // The original name of this document, which will eventually show up in the 
                          // Content-Disposition header. For example, if you had copied a document to a 
                          // tmp file, this would be the original, human-readable name of the document.

  char *description;	    // If you put a string here, it will show up as the Content-Description header.  
                          // This can be any explanatory text; it's not a file name.						 

  char *x_mac_type, *x_mac_creator; // Mac-specific data that should show up as optional parameters
						                        // to the content-type header.
  PRBool  isExternalAttachment;  // Flag for determining if the attachment is external
};


//
// When we have downloaded a URL to a tmp file for attaching, this
// represents everything we learned about it (and did to it) in the
// process. 
//
typedef struct nsMsgAttachedFile
{
  nsCOMPtr<nsIURI> orig_url;	// Where it came from on the network (or even elsewhere on the local disk.)

  nsFileSpec  *file_spec;		// The tmp file in which the (possibly converted) data now resides.
  
  char        *type;			  // The type of the data in file_name (not necessarily the same as the type of orig_url.)

  char        *encoding;		// Likewise, the encoding of the tmp file. This will be set only if the original 
                            // document had an encoding already; we don't do base64 encoding and so forth until 
                            // it's time to assemble a full MIME message of all parts.


  char        *description;	  // For Content-Description header 
  char        *x_mac_type;    // mac-specific info 
  char        *x_mac_creator; // mac-specific info 
  char        *real_name;		  // The real name of the file. 

  // Some statistics about the data that was written to the file, so that when
	// it comes time to compose a MIME message, we can make an informed decision
	// about what Content-Transfer-Encoding would be best for this attachment.
  // (If it's encoded already, we ignore this information and ship it as-is.)
  PRUint32    size;
  PRUint32    unprintable_count;
  PRUint32    highbit_count;
  PRUint32    ctl_count;
  PRUint32    null_count;
  PRUint32    max_line_length;
  
} nsMsgAttachedFile;
%}


[ptr] native nsMsgAttachmentData(nsMsgAttachmentData);
[ptr] native nsMsgAttachedFile(nsMsgAttachedFile);
[ptr] native nsMsgAttachmentHandler(nsMsgAttachmentHandler);
[ptr] native nsOutputFileStream(nsOutputFileStream);
[ptr] native nsCString(nsCString);

[scriptable, uuid(39876de6-207f-43f4-99a7-d60f1c49ea48)]
interface nsIMsgSend : nsISupports 
{
  //
  // This is the primary interface for creating and sending RFC822 messages
  // in the new architecture. Currently, this method supports many arguments
  // that change the behavior of the operation. This will change in time to 
  // be separate calls that will be more singluar in nature.
  //
  // NOTE: when aEditor is non-null, a multipart related MHTML message will 
  // be created
  //
    
    const nsMsgDeliverMode nsMsgDeliverNow = 0;
    const nsMsgDeliverMode nsMsgQueueForLater = 1;
    const nsMsgDeliverMode nsMsgSave = 2;
    const nsMsgDeliverMode nsMsgSaveAs = 3;
    const nsMsgDeliverMode nsMsgSaveAsDraft = 4;
    const nsMsgDeliverMode nsMsgSaveAsTemplate = 5;
    const nsMsgDeliverMode nsMsgSendUnsent = 6;

    [noscript]
    void createAndSendMessage(in nsIEditor                    aEditor,
                              in nsIMsgIdentity               aUserIdentity,
                              in string                       aAccountKey,
                              in nsIMsgCompFields             fields,
                              in PRBool                       digest_p,
                              in PRBool                       dont_deliver_p,
                              in nsMsgDeliverMode             mode, 
                              in nsIMsgDBHdr                  msgToReplace,
                              in string               attachment1_type,
                              in string               attachment1_body,
                              in PRUint32                     attachment1_body_length,
                              [const] in nsMsgAttachmentData  attachments,
                              [const] in nsMsgAttachedFile    preloaded_attachments,
                              in voidPtr                      relatedPart,
                              in nsIDOMWindowInternal         parentWindow,
                              in nsIMsgProgress               progress,
                              in nsIMsgSendListener           aListener,
                              in string                       password,
                              in AUTF8String                  aOriginalMsgURI,
                              in MSG_ComposeType              aType
                             );
                              
    
    void sendMessageFile(in nsIMsgIdentity       aUserIdentity,
                         in string               aAccountKey,
                         in nsIMsgCompFields     fields,
                         in nsIFileSpec          sendIFileSpec,
                         in PRBool               deleteSendFileOnCompletion,
                         in PRBool               digest_p,
                         in nsMsgDeliverMode     mode,
                         in nsIMsgDBHdr          msgToReplace,
                         in nsIMsgSendListener   aListener,
                         in nsIMsgStatusFeedback aStatusFeedback,
                         in string               password
                       ); 

    /* Abort current send/save operation */
    void abort();
    
    /* Report a send failure */
    nsresult fail(in nsresult failure_code, in wstring error_msg);

    /* Disable UI notification (alert message) */
    void setGUINotificationState(in PRBool aEnableFlag);
    
    /* Crypto */
    void BeginCryptoEncapsulation();

    /* retreive the last send process report*/
    readonly attribute nsIMsgSendReport sendReport; 
    
    /* methods for send listener ... */
    [noscript] void notifyListenerOnStartSending(in string aMsgID, in unsigned long aMsgSize);
    [noscript] void notifyListenerOnProgress(in string aMsgID, in unsigned long aProgress, in unsigned long aProgressMax);
    [noscript] void notifyListenerOnStatus(in string aMsgID, in wstring aMsg);
    [noscript] void notifyListenerOnStopSending(in string aMsgID, in nsresult aStatus, in wstring aMsg, in nsIFileSpec returnFileSpec);
    [noscript] void deliverAsMailExit(in nsIURI aUrl, in nsresult aExitCode);
    [noscript] void deliverAsNewsExit(in nsIURI aUrl, in nsresult aExitCode);

    /* methods for copy listener ... */
    [noscript] void notifyListenerOnStartCopy(); 
    [noscript] void notifyListenerOnProgressCopy(in unsigned long aProgress, in unsigned long aProgressMax);
    [noscript] void notifyListenerOnStopCopy(in nsresult aStatus);
    [noscript] void getMessageId(in nsCString messageID);
    [noscript] attribute nsMsgKey messageKey;

    [noscript] nsIPrompt getDefaultPrompt();
    
    /* process attachment */
    [noscript] void gatherMimeAttachments();
    [noscript] boolean getProcessAttachmentsSynchronously();
    [noscript] nsMsgAttachmentHandler getAttachmentHandlers();
    [noscript] readonly attribute unsigned long attachmentCount;
    [noscript] attribute unsigned long pendingAttachmentCount;
    [noscript] readonly attribute nsMsgDeliverMode deliveryMode;

    [noscript] nsIMsgProgress getProgress();
    
    [noscript] nsOutputFileStream getOutputStream();

	[noscript] attribute nsIRequest runningRequest;

    [noscript] attribute nsresult status;

    [noscript] attribute nsIMsgComposeSecure cryptoclosure;
};