kamp/RetroZilla
1
0
Fork 0
mirror of https://github.com/rn10950/RetroZilla.git synced 2024-11-14 03:30:17 +01:00
Code Issues Packages Projects Releases Wiki Activity
455fb87a48
RetroZilla/layout/generic/nsBlockFrame.cpp

7739 lines
271 KiB
C++
Raw Normal View History

first commit
2015-10-21 05:03:22 +02:00
/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
// vim:cindent:ts=2:et:sw=2:
/* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is Mozilla Communicator client code.
*
* The Initial Developer of the Original Code is
* Netscape Communications Corporation.
* Portions created by the Initial Developer are Copyright (C) 1998
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
* Steve Clark <buster@netscape.com>
* Robert O'Callahan <roc+moz@cs.cmu.edu>
* L. David Baron <dbaron@dbaron.org>
* IBM Corporation
* Mats Palmgren <mats.palmgren@bredband.net>
*
* Alternatively, the contents of this file may be used under the terms of
* either of the GNU General Public License Version 2 or later (the "GPL"),
* or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
#include "nsCOMPtr.h"
#include "nsBlockFrame.h"
#include "nsBlockReflowContext.h"
#include "nsBlockReflowState.h"
#include "nsBlockBandData.h"
#include "nsBulletFrame.h"
#include "nsLineBox.h"
#include "nsInlineFrame.h"
#include "nsLineLayout.h"
#include "nsPlaceholderFrame.h"
#include "nsStyleConsts.h"
#include "nsFrameManager.h"
#include "nsPresContext.h"
#include "nsIPresShell.h"
#include "nsReflowPath.h"
#include "nsStyleContext.h"
#include "nsIView.h"
#include "nsIFontMetrics.h"
#include "nsHTMLParts.h"
#include "nsHTMLAtoms.h"
#include "nsIDOMEvent.h"
#include "nsGenericHTMLElement.h"
#include "prprf.h"
#include "nsLayoutAtoms.h"
#include "nsITextContent.h"
#include "nsStyleChangeList.h"
#include "nsIFrameSelection.h"
#include "nsSpaceManager.h"
#include "nsIntervalSet.h"
#include "prenv.h"
#include "plstr.h"
#include "nsGUIEvent.h"
#include "nsLayoutErrors.h"
#include "nsAutoPtr.h"
#include "nsIServiceManager.h"
#include "nsIScrollableFrame.h"
#ifdef ACCESSIBILITY
#include "nsIAccessibilityService.h"
#endif
#include "nsLayoutUtils.h"
#include "nsBoxLayoutState.h"
#include "nsCSSAnonBoxes.h"
#ifdef IBMBIDI
#include "nsBidiPresUtils.h"
#endif // IBMBIDI
#include "nsIDOMHTMLBodyElement.h"
#include "nsIDOMHTMLHtmlElement.h"
static const int MIN_LINES_NEEDING_CURSOR = 20;
#ifdef DEBUG
#include "nsPrintfCString.h"
#include "nsBlockDebugFlags.h"
PRBool nsBlockFrame::gLamePaintMetrics;
PRBool nsBlockFrame::gLameReflowMetrics;
PRBool nsBlockFrame::gNoisy;
PRBool nsBlockFrame::gNoisyDamageRepair;
PRBool nsBlockFrame::gNoisyMaxElementWidth;
PRBool nsBlockFrame::gNoisyReflow;
PRBool nsBlockFrame::gReallyNoisyReflow;
PRBool nsBlockFrame::gNoisySpaceManager;
PRBool nsBlockFrame::gVerifyLines;
PRBool nsBlockFrame::gDisableResizeOpt;
PRInt32 nsBlockFrame::gNoiseIndent;
struct BlockDebugFlags {
const char* name;
PRBool* on;
};
static const BlockDebugFlags gFlags[] = {
{ "reflow", &nsBlockFrame::gNoisyReflow },
{ "really-noisy-reflow", &nsBlockFrame::gReallyNoisyReflow },
{ "max-element-width", &nsBlockFrame::gNoisyMaxElementWidth },
{ "space-manager", &nsBlockFrame::gNoisySpaceManager },
{ "verify-lines", &nsBlockFrame::gVerifyLines },
{ "damage-repair", &nsBlockFrame::gNoisyDamageRepair },
{ "lame-paint-metrics", &nsBlockFrame::gLamePaintMetrics },
{ "lame-reflow-metrics", &nsBlockFrame::gLameReflowMetrics },
{ "disable-resize-opt", &nsBlockFrame::gDisableResizeOpt },
};
#define NUM_DEBUG_FLAGS (sizeof(gFlags) / sizeof(gFlags[0]))
static void
ShowDebugFlags()
{
printf("Here are the available GECKO_BLOCK_DEBUG_FLAGS:\n");
const BlockDebugFlags* bdf = gFlags;
const BlockDebugFlags* end = gFlags + NUM_DEBUG_FLAGS;
for (; bdf < end; bdf++) {
printf(" %s\n", bdf->name);
}
printf("Note: GECKO_BLOCK_DEBUG_FLAGS is a comma separated list of flag\n");
printf("names (no whitespace)\n");
}
void
nsBlockFrame::InitDebugFlags()
{
static PRBool firstTime = PR_TRUE;
if (firstTime) {
firstTime = PR_FALSE;
char* flags = PR_GetEnv("GECKO_BLOCK_DEBUG_FLAGS");
if (flags) {
PRBool error = PR_FALSE;
for (;;) {
char* cm = PL_strchr(flags, ',');
if (cm) *cm = '\0';
PRBool found = PR_FALSE;
const BlockDebugFlags* bdf = gFlags;
const BlockDebugFlags* end = gFlags + NUM_DEBUG_FLAGS;
for (; bdf < end; bdf++) {
if (PL_strcasecmp(bdf->name, flags) == 0) {
*(bdf->on) = PR_TRUE;
printf("nsBlockFrame: setting %s debug flag on\n", bdf->name);
gNoisy = PR_TRUE;
found = PR_TRUE;
break;
}
}
if (!found) {
error = PR_TRUE;
}
if (!cm) break;
*cm = ',';
flags = cm + 1;
}
if (error) {
ShowDebugFlags();
}
}
}
}
#endif
// add in a sanity check for absurdly deep frame trees. See bug 42138
// can't just use IsFrameTreeTooDeep() because that method has side effects we don't want
#define MAX_DEPTH_FOR_LIST_RENUMBERING 200 // 200 open displayable tags is pretty unrealistic
//----------------------------------------------------------------------
// Debugging support code
#ifdef DEBUG
const char* nsBlockFrame::kReflowCommandType[] = {
"ContentChanged",
"StyleChanged",
"ReflowDirty",
"Timeout",
"UserDefined",
};
#endif
#ifdef REALLY_NOISY_FIRST_LINE
static void
DumpStyleGeneaology(nsIFrame* aFrame, const char* gap)
{
fputs(gap, stdout);
nsFrame::ListTag(stdout, aFrame);
printf(": ");
nsStyleContext* sc = aFrame->GetStyleContext();
while (nsnull != sc) {
nsStyleContext* psc;
printf("%p ", sc);
psc = sc->GetParent();
sc = psc;
}
printf("\n");
}
#endif
#ifdef REFLOW_STATUS_COVERAGE
static void
RecordReflowStatus(PRBool aChildIsBlock, nsReflowStatus aFrameReflowStatus)
{
static PRUint32 record[2];
// 0: child-is-block
// 1: child-is-inline
PRIntn index = 0;
if (!aChildIsBlock) index |= 1;
// Compute new status
PRUint32 newS = record[index];
if (NS_INLINE_IS_BREAK(aFrameReflowStatus)) {
if (NS_INLINE_IS_BREAK_BEFORE(aFrameReflowStatus)) {
newS |= 1;
}
else if (NS_FRAME_IS_NOT_COMPLETE(aFrameReflowStatus)) {
newS |= 2;
}
else {
newS |= 4;
}
}
else if (NS_FRAME_IS_NOT_COMPLETE(aFrameReflowStatus)) {
newS |= 8;
}
else {
newS |= 16;
}
// Log updates to the status that yield different values
if (record[index] != newS) {
record[index] = newS;
printf("record(%d): %02x %02x\n", index, record[0], record[1]);
}
}
#endif
//----------------------------------------------------------------------
const nsIID kBlockFrameCID = NS_BLOCK_FRAME_CID;
nsresult
NS_NewBlockFrame(nsIPresShell* aPresShell, nsIFrame** aNewFrame, PRUint32 aFlags)
{
NS_PRECONDITION(aNewFrame, "null OUT ptr");
if (nsnull == aNewFrame) {
return NS_ERROR_NULL_POINTER;
}
nsBlockFrame* it = new (aPresShell) nsBlockFrame;
if (nsnull == it) {
return NS_ERROR_OUT_OF_MEMORY;
}
it->SetFlags(aFlags);
*aNewFrame = it;
return NS_OK;
}
nsBlockFrame::nsBlockFrame()
{
#ifdef DEBUG
InitDebugFlags();
#endif
}
nsBlockFrame::~nsBlockFrame()
{
}
NS_IMETHODIMP
nsBlockFrame::Destroy(nsPresContext* aPresContext)
{
mAbsoluteContainer.DestroyFrames(this, aPresContext);
// Outside bullets are not in our child-list so check for them here
// and delete them when present.
if (mBullet && HaveOutsideBullet()) {
mBullet->Destroy(aPresContext);
mBullet = nsnull;
}
mFloats.DestroyFrames(aPresContext);
nsLineBox::DeleteLineList(aPresContext, mLines);
// destroy overflow lines now
nsLineList* overflowLines = RemoveOverflowLines();
if (overflowLines) {
nsLineBox::DeleteLineList(aPresContext, *overflowLines);
}
{
nsAutoOOFFrameList oofs(this);
oofs.mList.DestroyFrames(aPresContext);
// oofs is now empty and will remove the frame list property
}
return nsBlockFrameSuper::Destroy(aPresContext);
}
NS_IMETHODIMP
nsBlockFrame::QueryInterface(const nsIID& aIID, void** aInstancePtr)
{
NS_PRECONDITION(aInstancePtr, "null out param");
if (aIID.Equals(kBlockFrameCID)) {
*aInstancePtr = NS_STATIC_CAST(void*, NS_STATIC_CAST(nsBlockFrame*, this));
return NS_OK;
}
if (aIID.Equals(NS_GET_IID(nsILineIterator)) ||
aIID.Equals(NS_GET_IID(nsILineIteratorNavigator)))
{
nsLineIterator* it = new nsLineIterator;
if (!it) {
*aInstancePtr = nsnull;
return NS_ERROR_OUT_OF_MEMORY;
}
NS_ADDREF(it); // reference passed to caller
const nsStyleVisibility* visibility = GetStyleVisibility();
nsresult rv = it->Init(mLines,
visibility->mDirection == NS_STYLE_DIRECTION_RTL);
if (NS_FAILED(rv)) {
NS_RELEASE(it);
return rv;
}
*aInstancePtr = NS_STATIC_CAST(void*,
NS_STATIC_CAST(nsILineIteratorNavigator*, it));
return NS_OK;
}
return nsBlockFrameSuper::QueryInterface(aIID, aInstancePtr);
}
NS_IMETHODIMP
nsBlockFrame::IsSplittable(nsSplittableType& aIsSplittable) const
{
aIsSplittable = NS_FRAME_SPLITTABLE_NON_RECTANGULAR;
return NS_OK;
}
#ifdef DEBUG
NS_METHOD
nsBlockFrame::List(nsPresContext* aPresContext, FILE* out, PRInt32 aIndent) const
{
IndentBy(out, aIndent);
ListTag(out);
#ifdef DEBUG_waterson
fprintf(out, " [parent=%p]", mParent);
#endif
if (HasView()) {
fprintf(out, " [view=%p]", NS_STATIC_CAST(void*, GetView()));
}
if (nsnull != mNextSibling) {
fprintf(out, " next=%p", NS_STATIC_CAST(void*, mNextSibling));
}
// Output the flow linkage
if (nsnull != mPrevInFlow) {
fprintf(out, " prev-in-flow=%p", NS_STATIC_CAST(void*, mPrevInFlow));
}
if (nsnull != mNextInFlow) {
fprintf(out, " next-in-flow=%p", NS_STATIC_CAST(void*, mNextInFlow));
}
// Output the rect and state
fprintf(out, " {%d,%d,%d,%d}", mRect.x, mRect.y, mRect.width, mRect.height);
if (0 != mState) {
fprintf(out, " [state=%08x]", mState);
}
nsBlockFrame* f = NS_CONST_CAST(nsBlockFrame*, this);
nsRect* overflowArea = f->GetOverflowAreaProperty(PR_FALSE);
if (overflowArea) {
fprintf(out, " [overflow=%d,%d,%d,%d]", overflowArea->x, overflowArea->y,
overflowArea->width, overflowArea->height);
}
PRInt32 numInlineLines = 0;
PRInt32 numBlockLines = 0;
if (! mLines.empty()) {
for (const_line_iterator line = begin_lines(), line_end = end_lines();
line != line_end;
++line)
{
if (line->IsBlock())
numBlockLines++;
else
numInlineLines++;
}
}
fprintf(out, " sc=%p(i=%d,b=%d)",
NS_STATIC_CAST(void*, mStyleContext), numInlineLines, numBlockLines);
nsIAtom* pseudoTag = mStyleContext->GetPseudoType();
if (pseudoTag) {
nsAutoString atomString;
pseudoTag->ToString(atomString);
fprintf(out, " pst=%s",
NS_LossyConvertUCS2toASCII(atomString).get());
}
fputs("<\n", out);
aIndent++;
// Output the lines
if (! mLines.empty()) {
for (const_line_iterator line = begin_lines(), line_end = end_lines();
line != line_end;
++line)
{
line->List(aPresContext, out, aIndent);
}
}
nsIAtom* listName = nsnull;
PRInt32 listIndex = 0;
for (;;) {
listName = GetAdditionalChildListName(listIndex++);
if (nsnull == listName) {
break;
}
nsIFrame* kid = GetFirstChild(listName);
if (kid) {
IndentBy(out, aIndent);
nsAutoString tmp;
if (nsnull != listName) {
listName->ToString(tmp);
fputs(NS_LossyConvertUCS2toASCII(tmp).get(), out);
}
fputs("<\n", out);
while (kid) {
nsIFrameDebug* frameDebug;
if (NS_SUCCEEDED(CallQueryInterface(kid, &frameDebug))) {
frameDebug->List(aPresContext, out, aIndent + 1);
}
kid = kid->GetNextSibling();
}
IndentBy(out, aIndent);
fputs(">\n", out);
}
}
aIndent--;
IndentBy(out, aIndent);
fputs(">\n", out);
return NS_OK;
}
NS_IMETHODIMP_(nsFrameState)
nsBlockFrame::GetDebugStateBits() const
{
// We don't want to include our cursor flag in the bits the
// regression tester looks at
return nsBlockFrameSuper::GetDebugStateBits() & ~NS_BLOCK_HAS_LINE_CURSOR;
}
NS_IMETHODIMP
nsBlockFrame::GetFrameName(nsAString& aResult) const
{
return MakeFrameName(NS_LITERAL_STRING("Block"), aResult);
}
#endif
nsIAtom*
nsBlockFrame::GetType() const
{
return nsLayoutAtoms::blockFrame;
}
/////////////////////////////////////////////////////////////////////////////
// Child frame enumeration
nsIFrame*
nsBlockFrame::GetFirstChild(nsIAtom* aListName) const
{
if (mAbsoluteContainer.GetChildListName() == aListName) {
nsIFrame* result = nsnull;
mAbsoluteContainer.FirstChild(this, aListName, &result);
return result;
}
else if (nsnull == aListName) {
return (mLines.empty()) ? nsnull : mLines.front()->mFirstChild;
}
else if (aListName == nsLayoutAtoms::overflowList) {
nsLineList* overflowLines = GetOverflowLines();
return overflowLines ? overflowLines->front()->mFirstChild : nsnull;
}
else if (aListName == nsLayoutAtoms::overflowOutOfFlowList) {
return GetOverflowOutOfFlows().FirstChild();
}
else if (aListName == nsLayoutAtoms::floatList) {
return mFloats.FirstChild();
}
else if (aListName == nsLayoutAtoms::bulletList) {
if (HaveOutsideBullet()) {
return mBullet;
}
}
return nsnull;
}
nsIAtom*
nsBlockFrame::GetAdditionalChildListName(PRInt32 aIndex) const
{
switch (aIndex) {
case NS_BLOCK_FRAME_FLOAT_LIST_INDEX:
return nsLayoutAtoms::floatList;
case NS_BLOCK_FRAME_BULLET_LIST_INDEX:
return nsLayoutAtoms::bulletList;
case NS_BLOCK_FRAME_OVERFLOW_LIST_INDEX:
return nsLayoutAtoms::overflowList;
case NS_BLOCK_FRAME_OVERFLOW_OOF_LIST_INDEX:
return nsLayoutAtoms::overflowOutOfFlowList;
case NS_BLOCK_FRAME_ABSOLUTE_LIST_INDEX:
return mAbsoluteContainer.GetChildListName();
default:
return nsnull;
}
}
/* virtual */ PRBool
nsBlockFrame::IsContainingBlock() const
{
return PR_TRUE;
}
/* virtual */ PRBool
nsBlockFrame::IsFloatContainingBlock() const
{
return PR_TRUE;
}
static PRBool IsContinuationPlaceholder(nsIFrame* aFrame)
{
return aFrame->GetPrevInFlow() &&
nsLayoutAtoms::placeholderFrame == aFrame->GetType();
}
static void ReparentFrame(nsIFrame* aFrame, nsIFrame* aOldParent,
nsIFrame* aNewParent) {
NS_ASSERTION(aOldParent == aFrame->GetParent(),
"Parent not consistent with exepectations");
aFrame->SetParent(aNewParent);
// When pushing and pulling frames we need to check for whether any
// views need to be reparented
nsHTMLContainerFrame::ReparentFrameView(aFrame->GetPresContext(), aFrame,
aOldParent, aNewParent);
}
//////////////////////////////////////////////////////////////////////
// Frame structure methods
//////////////////////////////////////////////////////////////////////
// Reflow methods
static nsSize
CalculateContainingBlockSizeForAbsolutes(const nsHTMLReflowState& aReflowState,
nsSize aFrameSize)
{
// The issue here is that for a 'height' of 'auto' the reflow state
// code won't know how to calculate the containing block height
// because it's calculated bottom up. So we use our own computed
// size as the dimensions. We don't really want to do this for the
// initial containing block
nsIFrame* frame = aReflowState.frame;
if (nsLayoutUtils::IsInitialContainingBlock(frame)) {
return nsSize(-1, -1);
}
nsSize cbSize(aFrameSize);
// Containing block is relative to the padding edge
const nsMargin& border = aReflowState.mStyleBorder->GetBorder();
cbSize.width -= border.left + border.right;
cbSize.height -= border.top + border.bottom;
if (frame->GetParent()->GetContent() == frame->GetContent()) {
// We are a wrapped frame for the content. Use the container's
// dimensions, if they have been precomputed.
// XXX This is a hack! We really should be waiting until the outermost
// frame is fully reflowed and using the resulting dimensions, even
// if they're intrinsic.
// In fact we should be attaching absolute children to the outermost
// frame and not always sticking them in block frames.
// First, find the reflow state for the outermost frame for this
// content.
const nsHTMLReflowState* aLastRS = &aReflowState;
const nsHTMLReflowState* lastButOneRS = &aReflowState;
while (aLastRS->parentReflowState &&
aLastRS->parentReflowState->frame->GetContent() == frame->GetContent()) {
lastButOneRS = aLastRS;
aLastRS = aLastRS->parentReflowState;
}
if (aLastRS != &aReflowState) {
// The wrapper frame should be block-level. If it isn't, how the
// heck did it end up wrapping this block frame?
NS_ASSERTION(aLastRS->frame->GetStyleDisplay()->IsBlockLevel(),
"Wrapping frame should be block-level");
// Scrollbars need to be specifically excluded, if present, because they are outside the
// padding-edge. We need better APIs for getting the various boxes from a frame.
nsIScrollableFrame* scrollFrame;
CallQueryInterface(aLastRS->frame, &scrollFrame);
nsMargin scrollbars(0,0,0,0);
if (scrollFrame) {
nsBoxLayoutState dummyState(aLastRS->frame->GetPresContext());
scrollbars = scrollFrame->GetDesiredScrollbarSizes(&dummyState);
// XXX We should account for the horizontal scrollbar too --- but currently
// nsGfxScrollFrame assumes nothing depends on the presence (or absence) of
// a horizontal scrollbar, so accounting for it would create incremental
// reflow bugs.
//if (!lastButOneRS->mFlags.mAssumingHScrollbar) {
scrollbars.top = scrollbars.bottom = 0;
//}
if (!lastButOneRS->mFlags.mAssumingVScrollbar) {
scrollbars.left = scrollbars.right = 0;
}
}
// We found a reflow state for the outermost wrapping frame, so use
// its computed metrics if available
if (aLastRS->mComputedWidth != NS_UNCONSTRAINEDSIZE) {
cbSize.width = PR_MAX(0,
aLastRS->mComputedWidth + aLastRS->mComputedPadding.LeftRight() - scrollbars.LeftRight());
}
if (aLastRS->mComputedHeight != NS_UNCONSTRAINEDSIZE) {
cbSize.height = PR_MAX(0,
aLastRS->mComputedHeight + aLastRS->mComputedPadding.TopBottom() - scrollbars.TopBottom());
}
}
}
return cbSize;
}
NS_IMETHODIMP
nsBlockFrame::Reflow(nsPresContext* aPresContext,
nsHTMLReflowMetrics& aMetrics,
const nsHTMLReflowState& aReflowState,
nsReflowStatus& aStatus)
{
DO_GLOBAL_REFLOW_COUNT("nsBlockFrame", aReflowState.reason);
DISPLAY_REFLOW(aPresContext, this, aReflowState, aMetrics, aStatus);
#ifdef DEBUG
if (gNoisyReflow) {
nsCAutoString reflow;
reflow.Append(nsHTMLReflowState::ReasonToString(aReflowState.reason));
if (aReflowState.reason == eReflowReason_Incremental) {
nsHTMLReflowCommand *command = aReflowState.path->mReflowCommand;
if (command) {
// We're the target.
reflow += " (";
reflow += kReflowCommandType[command->Type()];
reflow += ")";
}
}
IndentBy(stdout, gNoiseIndent);
ListTag(stdout);
printf(": begin %s reflow availSize=%d,%d computedSize=%d,%d\n",
reflow.get(),
aReflowState.availableWidth, aReflowState.availableHeight,
aReflowState.mComputedWidth, aReflowState.mComputedHeight);
}
AutoNoisyIndenter indent(gNoisy);
PRTime start = LL_ZERO; // Initialize these variablies to silence the compiler.
PRInt32 ctc = 0; // We only use these if they are set (gLameReflowMetrics).
if (gLameReflowMetrics) {
start = PR_Now();
ctc = nsLineBox::GetCtorCount();
}
#endif
nsSize oldSize = GetSize();
// Should we create a space manager?
nsAutoSpaceManager autoSpaceManager(NS_CONST_CAST(nsHTMLReflowState &, aReflowState));
// XXXldb If we start storing the space manager in the frame rather
// than keeping it around only during reflow then we should create it
// only when there are actually floats to manage. Otherwise things
// like tables will gain significant bloat.
if (NS_BLOCK_SPACE_MGR & mState)
autoSpaceManager.CreateSpaceManagerFor(aPresContext, this);
// See if it's an incremental reflow command targeted only at
// absolute frames and we can skip ReflowDirtyLines().
PRBool needToReflowLines = aMetrics.mComputeMEW ||
// If we have lines with clearance, and the space manager already has
// floats, we need to check the positions of our lines with clearance
((GetStateBits() & NS_BLOCK_HAS_CLEAR_CHILDREN) &&
aReflowState.mSpaceManager->HasAnyFloats()) ||
// The areas of any floats in this block or in blocks under us
// need to be put into the space manager --- unless we are our own
// space manager, in which case it doesn't matter.
!(GetStateBits() & NS_BLOCK_SPACE_MGR);
if (mAbsoluteContainer.HasAbsoluteFrames() &&
eReflowReason_Incremental == aReflowState.reason &&
!needToReflowLines &&
mAbsoluteContainer.ReflowingAbsolutesOnly(this, aReflowState)) {
nsSize containingBlockSize
= CalculateContainingBlockSizeForAbsolutes(aReflowState, GetSize());
mAbsoluteContainer.IncrementalReflow(this, aPresContext, aReflowState,
containingBlockSize.width,
containingBlockSize.height);
// Just return our current size as our desired size.
aMetrics.width = mRect.width;
aMetrics.height = mRect.height;
aMetrics.ascent = mAscent;
aMetrics.descent = aMetrics.height - aMetrics.ascent;
// Whether or not we're complete hasn't changed
aStatus = (nsnull != mNextInFlow) ? NS_FRAME_NOT_COMPLETE : NS_FRAME_COMPLETE;
// Factor the absolutely positioned child bounds into the overflow area
ComputeCombinedArea(aReflowState, aMetrics);
nsRect childBounds;
mAbsoluteContainer.CalculateChildBounds(aPresContext, childBounds);
aMetrics.mOverflowArea.UnionRect(aMetrics.mOverflowArea, childBounds);
FinishAndStoreOverflow(&aMetrics);
return NS_OK;
}
// OK, some lines may be reflowed. Blow away any saved line cursor because
// we may invalidate the nondecreasing combinedArea.y/yMost invariant,
// and we may even delete the line with the line cursor.
ClearLineCursor();
if (IsFrameTreeTooDeep(aReflowState, aMetrics)) {
#ifdef DEBUG_kipp
{
extern char* nsPresShell_ReflowStackPointerTop;
char marker;
char* newsp = (char*) &marker;
printf("XXX: frame tree is too deep; approx stack size = %d\n",
nsPresShell_ReflowStackPointerTop - newsp);
}
#endif
aStatus = NS_FRAME_COMPLETE;
return NS_OK;
}
nsBlockReflowState state(aReflowState, aPresContext, this, aMetrics,
(NS_BLOCK_MARGIN_ROOT & mState),
(NS_BLOCK_MARGIN_ROOT & mState));
// The condition for doing Bidi resolutions includes a test for the
// dirtiness flags, because blocks sometimes send a resize reflow
// even though they have dirty children, An example where this can
// occur is when adding lines to a text control (bugs 95228 and 95400
// were caused by not doing Bidi resolution in these cases)
if (eReflowReason_Resize != aReflowState.reason ||
mState & NS_FRAME_IS_DIRTY || mState & NS_FRAME_HAS_DIRTY_CHILDREN) {
#ifdef IBMBIDI
if (! mLines.empty()) {
if (aPresContext->BidiEnabled()) {
nsBidiPresUtils* bidiUtils = aPresContext->GetBidiUtils();
if (bidiUtils) {
PRBool forceReflow;
nsresult rc = bidiUtils->Resolve(aPresContext, this,
mLines.front()->mFirstChild,
forceReflow,
aReflowState.mFlags.mVisualBidiFormControl);
if (NS_SUCCEEDED(rc) && forceReflow) {
// Mark everything dirty
// XXXldb This should be done right.
for (line_iterator line = begin_lines(), line_end = end_lines();
line != line_end;
++line)
{
line->MarkDirty();
}
}
}
}
}
#endif // IBMBIDI
RenumberLists(aPresContext);
}
nsresult rv = NS_OK;
// ALWAYS drain overflow. We never want to leave the previnflow's
// overflow lines hanging around; block reflow depends on the
// overflow line lists being cleared out between reflow passes.
DrainOverflowLines(state);
state.SetupOverflowPlaceholdersProperty();
switch (aReflowState.reason) {
case eReflowReason_Initial:
#ifdef NOISY_REFLOW_REASON
ListTag(stdout);
printf(": reflow=initial\n");
#endif
rv = PrepareInitialReflow(state);
mState &= ~NS_FRAME_FIRST_REFLOW;
break;
case eReflowReason_Dirty:
// Do nothing; the dirty lines will already have been marked.
break;
case eReflowReason_Incremental: {
#ifdef NOISY_REFLOW_REASON
ListTag(stdout);
printf(": reflow=incremental ");
#endif
nsReflowPath *path = aReflowState.path;
nsHTMLReflowCommand *command = path->mReflowCommand;
if (command) {
#ifdef NOISY_REFLOW_REASON
printf("type=%s ", kReflowCommandType[command->Type()]);
#endif
switch (command->Type()) {
case eReflowType_StyleChanged:
rv = PrepareStyleChangedReflow(state);
break;
case eReflowType_ReflowDirty:
// Do nothing; the dirty lines will already have been marked.
break;
case eReflowType_ContentChanged:
// Perform a full reflow.
rv = PrepareResizeReflow(state);
break;
default:
// We shouldn't get here. But, if we do, perform a full reflow.
NS_ERROR("unexpected reflow type");
rv = PrepareResizeReflow(state);
break;
}
}
if (path->FirstChild() != path->EndChildren()) {
// We're along the reflow path, but not necessarily the target
// of the reflow.
#ifdef NOISY_REFLOW_REASON
ListTag(stdout);
printf(" next={ ");
for (nsReflowPath::iterator iter = path->FirstChild();
iter != path->EndChildren();
++iter) {
nsFrame::ListTag(stdout, *iter);
printf(" ");
}
printf("}");
#endif
rv = PrepareChildIncrementalReflow(state);
}
#ifdef NOISY_REFLOW_REASON
printf("\n");
#endif
break;
}
case eReflowReason_StyleChange:
rv = PrepareStyleChangedReflow(state);
break;
case eReflowReason_Resize:
default:
#ifdef NOISY_REFLOW_REASON
ListTag(stdout);
printf(": reflow=resize (%d)\n", aReflowState.reason);
#endif
rv = PrepareResizeReflow(state);
break;
}
NS_ASSERTION(NS_SUCCEEDED(rv), "setting up reflow failed");
if (NS_FAILED(rv)) return rv;
// Now reflow...
rv = ReflowDirtyLines(state, PR_TRUE);
NS_ASSERTION(NS_SUCCEEDED(rv), "reflow dirty lines failed");
if (NS_FAILED(rv)) return rv;
// If the block is complete, put continuted floats in the closest ancestor
// block that uses the same space manager and leave the block complete; this
// allows subsequent lines on the page to be impacted by floats. If the
// block is incomplete or there is no ancestor using the same space manager,
// put continued floats at the beginning of the first overflow line.
if (state.mOverflowPlaceholders.NotEmpty()) {
NS_ASSERTION(aReflowState.availableHeight != NS_UNCONSTRAINEDSIZE,
"Somehow we failed to fit all content, even though we have unlimited space!");
if (NS_FRAME_IS_COMPLETE(state.mReflowStatus)) {
// find the nearest block ancestor that uses the same space manager
for (const nsHTMLReflowState* ancestorRS = aReflowState.parentReflowState;
ancestorRS;
ancestorRS = ancestorRS->parentReflowState) {
nsIFrame* ancestor = ancestorRS->frame;
nsIAtom* fType = ancestor->GetType();
if ((nsLayoutAtoms::blockFrame == fType || nsLayoutAtoms::areaFrame == fType) &&
aReflowState.mSpaceManager == ancestorRS->mSpaceManager) {
// Put the continued floats in ancestor since it uses the same space manager
nsFrameList* ancestorPlace =
((nsBlockFrame*)ancestor)->GetOverflowPlaceholders();
// The ancestor should have this list, since it's being reflowed. But maybe
// it isn't because of reflow roots or something.
if (ancestorPlace) {
for (nsIFrame* f = state.mOverflowPlaceholders.FirstChild();
f; f = f->GetNextSibling()) {
NS_ASSERTION(IsContinuationPlaceholder(f),
"Overflow placeholders must be continuation placeholders");
ReparentFrame(f, this, ancestorRS->frame);
nsIFrame* oof = nsPlaceholderFrame::GetRealFrameForPlaceholder(f);
mFloats.RemoveFrame(oof);
ReparentFrame(oof, this, ancestorRS->frame);
// Clear the next-sibling in case the frame wasn't in mFloats
oof->SetNextSibling(nsnull);
// Do not put the float into any child frame list, because
// placeholders in the overflow-placeholder block-state list
// don't keep their out of flows in a child frame list.
}
ancestorPlace->AppendFrames(nsnull, state.mOverflowPlaceholders.FirstChild());
state.mOverflowPlaceholders.SetFrames(nsnull);
break;
}
}
}
}
if (!state.mOverflowPlaceholders.IsEmpty()) {
state.mOverflowPlaceholders.SortByContentOrder();
PRInt32 numOverflowPlace = state.mOverflowPlaceholders.GetLength();
nsLineBox* newLine =
state.NewLineBox(state.mOverflowPlaceholders.FirstChild(),
numOverflowPlace, PR_FALSE);
if (newLine) {
nsLineList* overflowLines = GetOverflowLines();
if (overflowLines) {
// Need to put the overflow placeholders' floats into our
// overflow-out-of-flows list, since the overflow placeholders are
// going onto our overflow line list. Put them last, because that's
// where the placeholders are going.
nsFrameList floats;
nsIFrame* lastFloat = nsnull;
for (nsIFrame* f = state.mOverflowPlaceholders.FirstChild();
f; f = f->GetNextSibling()) {
NS_ASSERTION(IsContinuationPlaceholder(f),
"Overflow placeholders must be continuation placeholders");
nsIFrame* oof = nsPlaceholderFrame::GetRealFrameForPlaceholder(f);
// oof is not currently in any child list
floats.InsertFrames(nsnull, lastFloat, oof);
lastFloat = oof;
}
// Put the new placeholders *last* in the overflow lines
// because they might have previnflows in the overflow lines.
nsIFrame* lastChild = overflowLines->back()->LastChild();
lastChild->SetNextSibling(state.mOverflowPlaceholders.FirstChild());
// Create a new line as the last line and put the
// placeholders there
overflowLines->push_back(newLine);
nsAutoOOFFrameList oofs(this);
oofs.mList.AppendFrames(nsnull, floats.FirstChild());
}
else {
mLines.push_back(newLine);
nsLineList::iterator nextToLastLine = ----end_lines();
PushLines(state, nextToLastLine);
}
state.mOverflowPlaceholders.SetFrames(nsnull);
}
state.mReflowStatus |= NS_FRAME_NOT_COMPLETE | NS_FRAME_REFLOW_NEXTINFLOW;
}
}
if (NS_FRAME_IS_NOT_COMPLETE(state.mReflowStatus)) {
if (GetOverflowLines()) {
state.mReflowStatus |= NS_FRAME_REFLOW_NEXTINFLOW;
}
if (NS_STYLE_OVERFLOW_CLIP == aReflowState.mStyleDisplay->mOverflowX) {
state.mReflowStatus = NS_FRAME_COMPLETE;
}
else {
#ifdef DEBUG_kipp
ListTag(stdout); printf(": block is not complete\n");
#endif
}
}
CheckFloats(state);
// Compute our final size
ComputeFinalSize(aReflowState, state, aMetrics);
nsRect currentOverflow = aMetrics.mOverflowArea;
FinishAndStoreOverflow(&aMetrics);
// see if verifyReflow is enabled, and if so store off the space manager pointer
#ifdef DEBUG
PRInt32 verifyReflowFlags = nsIPresShell::GetVerifyReflowFlags();
if (VERIFY_REFLOW_INCLUDE_SPACE_MANAGER & verifyReflowFlags)
{
// this is a leak of the space manager, but it's only in debug if verify reflow is enabled, so not a big deal
nsIPresShell *shell = aPresContext->GetPresShell();
if (shell) {
nsHTMLReflowState& reflowState = (nsHTMLReflowState&)aReflowState;
rv = SetProperty(nsLayoutAtoms::spaceManagerProperty,
reflowState.mSpaceManager,
nsnull /* should be nsSpaceManagerDestroyer*/);
autoSpaceManager.DebugOrphanSpaceManager();
}
}
#endif
// Let the absolutely positioned container reflow any absolutely positioned
// child frames that need to be reflowed, e.g., elements with a percentage
// based width/height
// We want to do this under either of two conditions:
// 1. If we didn't do the incremental reflow above.
// 2. If our size changed.
// Even though it's the padding edge that's the containing block, we
// can use our rect (the border edge) since if the border style
// changed, the reflow would have been targeted at us so we'd satisfy
// condition 1.
if (mAbsoluteContainer.HasAbsoluteFrames()) {
nsRect childBounds;
nsSize containingBlockSize
= CalculateContainingBlockSizeForAbsolutes(aReflowState,
nsSize(aMetrics.width, aMetrics.height));
PRBool forceAbsoluteReflow = PR_TRUE;
PRBool cbWidthChanged = PR_TRUE;
PRBool cbHeightChanged = PR_TRUE;
if (eReflowReason_Incremental == aReflowState.reason) {
// Do the incremental reflows ... would be nice to merge with
// the reflows below but that would be more work, and more risky
mAbsoluteContainer.IncrementalReflow(this, aPresContext, aReflowState,
containingBlockSize.width,
containingBlockSize.height);
// If a reflow was targeted at this block then we'd better
// reflow the absolutes. For example the borders and padding
// might have changed in a way that leaves the frame size the
// same but the padding edge has moved.
if (!aReflowState.path->mReflowCommand) {
// We don't have to force reflow of all the absolutes.
forceAbsoluteReflow = PR_FALSE;
// We need to reflow those absolutes that depend on their
// placeholder position, or the containing block size in a
// direction in which the containing block size might have
// changed. So figure out whether our size changed.
cbWidthChanged = aMetrics.width != oldSize.width;
PRBool isRoot = !GetContent()->GetParent();
// If isRoot and we have auto height, then we are the initial
// containing block and the containing block height is the
// viewport height, which can't change during incremental
// reflow.
cbHeightChanged = isRoot && NS_UNCONSTRAINEDSIZE == aReflowState.mComputedHeight
? PR_FALSE : aMetrics.height != oldSize.height;
}
}
rv = mAbsoluteContainer.Reflow(this, aPresContext, aReflowState,
containingBlockSize.width,
containingBlockSize.height,
&childBounds,
forceAbsoluteReflow,
cbWidthChanged,
cbHeightChanged);
// Factor the absolutely positioned child bounds into the overflow area
aMetrics.mOverflowArea.UnionRect(currentOverflow, childBounds);
FinishAndStoreOverflow(&aMetrics);
}
// Determine if we need to repaint our border, background or outline
CheckInvalidateSizeChange(aPresContext, aMetrics, aReflowState);
// Clear the space manager pointer in the block reflow state so we
// don't waste time translating the coordinate system back on a dead
// space manager.
if (NS_BLOCK_SPACE_MGR & mState)
state.mSpaceManager = nsnull;
aStatus = state.mReflowStatus;
#ifdef DEBUG
if (gNoisyReflow) {
IndentBy(stdout, gNoiseIndent);
ListTag(stdout);
printf(": status=%x (%scomplete) metrics=%d,%d carriedMargin=%d",
aStatus, NS_FRAME_IS_COMPLETE(aStatus) ? "" : "not ",
aMetrics.width, aMetrics.height,
aMetrics.mCarriedOutBottomMargin.get());
if (mState & NS_FRAME_OUTSIDE_CHILDREN) {
printf(" combinedArea={%d,%d,%d,%d}",
aMetrics.mOverflowArea.x,
aMetrics.mOverflowArea.y,
aMetrics.mOverflowArea.width,
aMetrics.mOverflowArea.height);
}
if (aMetrics.mComputeMEW) {
printf(" maxElementWidth=%d", aMetrics.mMaxElementWidth);
}
printf("\n");
}
if (gLameReflowMetrics) {
PRTime end = PR_Now();
PRInt32 ectc = nsLineBox::GetCtorCount();
PRInt32 numLines = mLines.size();
if (!numLines) numLines = 1;
PRTime delta, perLineDelta, lines;
LL_I2L(lines, numLines);
LL_SUB(delta, end, start);
LL_DIV(perLineDelta, delta, lines);
ListTag(stdout);
char buf[400];
PR_snprintf(buf, sizeof(buf),
": %lld elapsed (%lld per line) (%d lines; %d new lines)",
delta, perLineDelta, numLines, ectc - ctc);
printf("%s\n", buf);
}
if (gNoisyMaxElementWidth) {
if (aMetrics.mComputeMEW) {
IndentBy(stdout, gNoiseIndent);
printf("block %p returning with maxElementWidth=%d\n",
NS_STATIC_CAST(void*, this),
aMetrics.mMaxElementWidth);
}
}
#endif
NS_FRAME_SET_TRUNCATION(aStatus, aReflowState, aMetrics);
return rv;
}
static PRBool
HaveAutoWidth(const nsHTMLReflowState& aReflowState)
{
return NS_UNCONSTRAINEDSIZE == aReflowState.mComputedWidth ||
eStyleUnit_Auto == aReflowState.mStylePosition->mWidth.GetUnit();
}
// XXXldb why do we check vertical and horizontal at the same time? Don't
// we usually care about one or the other?
static PRBool
IsPercentageAwareChild(const nsIFrame* aFrame)
{
NS_ASSERTION(aFrame, "null frame is not allowed");
const nsStyleMargin* margin = aFrame->GetStyleMargin();
if (nsLineLayout::IsPercentageUnitSides(&margin->mMargin)) {
return PR_TRUE;
}
const nsStylePadding* padding = aFrame->GetStylePadding();
if (nsLineLayout::IsPercentageUnitSides(&padding->mPadding)) {
return PR_TRUE;
}
// Note that borders can't be aware of percentages
const nsStylePosition* pos = aFrame->GetStylePosition();
if (eStyleUnit_Percent == pos->mWidth.GetUnit()
|| eStyleUnit_Percent == pos->mMaxWidth.GetUnit()
|| eStyleUnit_Percent == pos->mMinWidth.GetUnit()
|| eStyleUnit_Percent == pos->mHeight.GetUnit()
|| eStyleUnit_Percent == pos->mMinHeight.GetUnit()
|| eStyleUnit_Percent == pos->mMaxHeight.GetUnit()
|| nsLineLayout::IsPercentageUnitSides(&pos->mOffset)) { // XXX need more here!!!
return PR_TRUE;
}
return PR_FALSE;
}
PRBool
nsBlockFrame::CheckForCollapsedBottomMarginFromClearanceLine()
{
line_iterator begin = begin_lines();
line_iterator line = end_lines();
while (PR_TRUE) {
if (begin == line) {
return PR_FALSE;
}
--line;
if (line->mBounds.height != 0 || !line->CachedIsEmpty()) {
return PR_FALSE;
}
if (line->HasClearance()) {
return PR_TRUE;
}
}
// not reached
}
void
nsBlockFrame::ComputeFinalSize(const nsHTMLReflowState& aReflowState,
nsBlockReflowState& aState,
nsHTMLReflowMetrics& aMetrics)
{
const nsMargin& borderPadding = aState.BorderPadding();
#ifdef NOISY_FINAL_SIZE
ListTag(stdout);
printf(": mY=%d mIsBottomMarginRoot=%s mPrevBottomMargin=%d bp=%d,%d\n",
aState.mY, aState.GetFlag(BRS_ISBOTTOMMARGINROOT) ? "yes" : "no",
aState.mPrevBottomMargin,
borderPadding.top, borderPadding.bottom);
#endif
// XXXldb Handling min-width/max-width stuff after reflowing children
// seems wrong. But IIRC this function only does more than a little
// bit in rare cases (or something like that, I'm not really sure).
// What are those cases, and do we get the wrong behavior?
// Compute final width
nscoord maxElementWidth = 0;
#ifdef NOISY_KIDXMOST
printf("%p aState.mKidXMost=%d\n", this, aState.mKidXMost);
#endif
if (!HaveAutoWidth(aReflowState)) {
// Use style defined width
aMetrics.width = borderPadding.left + aReflowState.mComputedWidth +
borderPadding.right;
if (aState.GetFlag(BRS_COMPUTEMAXELEMENTWIDTH)) {
if (GetStylePosition()->mWidth.GetUnit() == eStyleUnit_Percent) {
// for percentage widths, |HaveAutoWidth| is sometimes true and
// sometimes false (XXXldb check that this is really true), and
// we want the max-element-width to be the same either way
// (i.e., whether it's an uncontsrained reflow or a fixed-width
// reflow). Thus, do the same thing we do below.
maxElementWidth = aState.mMaxElementWidth +
borderPadding.left + borderPadding.right;
} else {
// When style defines the width use it for the max-element-width
// because we can't shrink any smaller.
maxElementWidth = aMetrics.width;
}
}
}
else {
nscoord computedWidth;
// XXX Misleading comment:
// There are two options here. We either shrink wrap around our
// contents or we fluff out to the maximum block width. Note:
// We always shrink wrap when given an unconstrained width.
if ((0 == (NS_BLOCK_SHRINK_WRAP & mState)) &&
!aState.GetFlag(BRS_UNCONSTRAINEDWIDTH) &&
!aState.GetFlag(BRS_SHRINKWRAPWIDTH)) {
// XXX Misleading comment:
// Set our width to the max width if we aren't already that
// wide. Note that the max-width has nothing to do with our
// contents (CSS2 section XXX)
// XXXldb In what cases do we reach this code?
computedWidth = borderPadding.left + aState.mContentArea.width +
borderPadding.right;
} else {
computedWidth = aState.mKidXMost;
if (NS_BLOCK_SPACE_MGR & mState) {
// Include the space manager's state to properly account for the
// extent of floated elements.
nscoord xmost;
if (aReflowState.mSpaceManager->XMost(xmost) &&
computedWidth < xmost)
computedWidth = xmost;
}
computedWidth += borderPadding.right;
}
if (aState.GetFlag(BRS_COMPUTEMAXELEMENTWIDTH)) {
// Add in border and padding dimensions to already computed
// max-element-width values.
maxElementWidth = aState.mMaxElementWidth +
borderPadding.left + borderPadding.right;
}
// Apply min/max values
computedWidth -= borderPadding.left + borderPadding.right;
aReflowState.ApplyMinMaxConstraints(&computedWidth, nsnull);
computedWidth += borderPadding.left + borderPadding.right;
if (aState.GetFlag(BRS_COMPUTEMAXELEMENTWIDTH)) {
nscoord computedMinWidth = aReflowState.mComputedMinWidth +
borderPadding.left + borderPadding.right;
if (maxElementWidth < computedMinWidth &&
GetStylePosition()->mMinWidth.GetUnit() != eStyleUnit_Percent) {
maxElementWidth = computedMinWidth;
}
}
aMetrics.width = computedWidth;
// If we're shrink wrapping, then now that we know our final width we
// need to do horizontal alignment of the inline lines and make sure
// blocks are correctly sized and positioned. Any lines that need
// final adjustment will have been marked as dirty
if (aState.GetFlag(BRS_SHRINKWRAPWIDTH) && aState.GetFlag(BRS_NEEDRESIZEREFLOW)) {
// If the closest block ancestor (and anything in between) is also
// shrink wrap width, then we don't need to do this, because it
// will reflow us after it calculates the final width
PRBool rewrap = PR_TRUE;
for (const nsHTMLReflowState *prs = aReflowState.parentReflowState;
prs && prs->mComputedWidth == NS_SHRINKWRAPWIDTH;
prs = prs->parentReflowState) {
if (prs->frame->GetType() == nsLayoutAtoms::blockFrame ||
prs->frame->GetType() == nsLayoutAtoms::areaFrame) {
rewrap = PR_FALSE;
break;
}
}
if (rewrap) {
// XXX Is this only used on things that are already NS_BLOCK_SPACE_MGR
// and NS_BLOCK_MARGIN_ROOT?
nsHTMLReflowState reflowState(aReflowState);
reflowState.mComputedWidth = aMetrics.width - borderPadding.left -
borderPadding.right;
reflowState.reason = eReflowReason_Resize;
reflowState.mSpaceManager->ClearRegions();
#ifdef DEBUG
nscoord oldDesiredWidth = aMetrics.width;
#endif
nsBlockReflowState state(reflowState, aState.mPresContext, this,
aMetrics,
aReflowState.mFlags.mHasClearance || (NS_BLOCK_MARGIN_ROOT & mState),
(NS_BLOCK_MARGIN_ROOT & mState));
// Don't try to pull up any new content from our next in flow. Shrinkwrapping
// shouldn't make us shorter anyway.
ReflowDirtyLines(state, PR_FALSE);
aState.mY = state.mY;
NS_ASSERTION(oldDesiredWidth == aMetrics.width, "bad desired width");
}
}
}
// Return bottom margin information
// rbs says he hit this assertion occasionally (see bug 86947), so
// just set the margin to zero and we'll figure out why later
//NS_ASSERTION(aMetrics.mCarriedOutBottomMargin.IsZero(),
// "someone else set the margin");
nscoord nonCarriedOutVerticalMargin = 0;
if (!aState.GetFlag(BRS_ISBOTTOMMARGINROOT)) {
// Apply rule from CSS 2.1 section 8.3.1. If we have some empty
// line with clearance and a non-zero top margin and all
// subsequent lines are empty, then we do not allow our childrens'
// carried out bottom margin to be carried out of us and collapse
// with our own bottom margin.
if (CheckForCollapsedBottomMarginFromClearanceLine()) {
// Convert the children's carried out margin to something that
// we will include in our height
nonCarriedOutVerticalMargin = aState.mPrevBottomMargin.get();
aState.mPrevBottomMargin.Zero();
}
aMetrics.mCarriedOutBottomMargin = aState.mPrevBottomMargin;
} else {
aMetrics.mCarriedOutBottomMargin.Zero();
}
// Compute final height
if (NS_UNCONSTRAINEDSIZE != aReflowState.mComputedHeight) {
if (NS_FRAME_IS_COMPLETE(aState.mReflowStatus)) {
// Figure out how much of the computed height should be
// applied to this frame.
nscoord computedHeightLeftOver = aReflowState.mComputedHeight;
if (mPrevInFlow) {
// Reduce the height by the computed height of prev-in-flows.
for (nsIFrame* prev = mPrevInFlow; prev; prev = prev->GetPrevInFlow()) {
nscoord contentHeight = prev->GetRect().height;
if (prev == mPrevInFlow) {
// subtract off the style top borderpadding to get the
// content height
contentHeight -= aReflowState.mComputedBorderPadding.top;
}
computedHeightLeftOver -= contentHeight;
}
// We may have stretched the frame beyond its computed height. Oh well.
computedHeightLeftOver = PR_MAX(0, computedHeightLeftOver);
}
aMetrics.height = borderPadding.top + computedHeightLeftOver + borderPadding.bottom;
if (computedHeightLeftOver > 0 &&
aMetrics.height > aReflowState.availableHeight) {
// We don't fit and we consumed some of the computed height,
// so we should consume all the available height and then
// break. If our bottom border/padding straddles the break
// point, then this will increase our height and push the
// border/padding to the next page/column.
aMetrics.height = aReflowState.availableHeight;
aState.mReflowStatus |= NS_FRAME_NOT_COMPLETE;
}
}
else {
// Use the current height; continuations will take up the rest.
// Do extend the height to at least consume the available
// height, otherwise our left/right borders (for example) won't
// extend all the way to the break.
aMetrics.height = PR_MAX(aReflowState.availableHeight,
aState.mY + nonCarriedOutVerticalMargin);
}
// Don't carry out a bottom margin when our height is fixed.
aMetrics.mCarriedOutBottomMargin.Zero();
}
else {
nscoord autoHeight = aState.mY + nonCarriedOutVerticalMargin;
// Shrink wrap our height around our contents.
if (aState.GetFlag(BRS_ISBOTTOMMARGINROOT)) {
// When we are a bottom-margin root make sure that our last
// childs bottom margin is fully applied.
// Apply the margin only if there's space for it.
if (autoHeight < aState.mReflowState.availableHeight)
{
// Truncate bottom margin if it doesn't fit to our available height.
autoHeight = PR_MIN(autoHeight + aState.mPrevBottomMargin.get(), aState.mReflowState.availableHeight);
}
}
if (NS_BLOCK_SPACE_MGR & mState) {
// Include the space manager's state to properly account for the
// bottom margin of any floated elements; e.g., inside a table cell.
nscoord ymost;
if (aReflowState.mSpaceManager->YMost(ymost) &&
autoHeight < ymost)
autoHeight = ymost;
}
// Apply min/max values
autoHeight -= borderPadding.top;
nscoord oldAutoHeight = autoHeight;
aReflowState.ApplyMinMaxConstraints(nsnull, &autoHeight);
if (autoHeight != oldAutoHeight) {
// Our min-height or max-height made our height change. Don't carry out
// our kids' bottom margins.
aMetrics.mCarriedOutBottomMargin.Zero();
}
autoHeight += borderPadding.top + borderPadding.bottom;
aMetrics.height = autoHeight;
}
aMetrics.ascent = mAscent;
aMetrics.descent = aMetrics.height - aMetrics.ascent;
if (aState.GetFlag(BRS_COMPUTEMAXELEMENTWIDTH)) {
// Store away the final value
aMetrics.mMaxElementWidth = maxElementWidth;
#ifdef DEBUG
if (gNoisyMaxElementWidth) {
IndentBy(stdout, gNoiseIndent);
printf ("nsBlockFrame::CFS: %p returning MEW %d\n",
NS_STATIC_CAST(void*, this), aMetrics.mMaxElementWidth);
}
#endif
}
#ifdef DEBUG_blocks
if (CRAZY_WIDTH(aMetrics.width) || CRAZY_HEIGHT(aMetrics.height)) {
ListTag(stdout);
printf(": WARNING: desired:%d,%d\n", aMetrics.width, aMetrics.height);
}
if (aState.GetFlag(BRS_COMPUTEMAXELEMENTWIDTH) &&
(maxElementWidth > aMetrics.width))) {
ListTag(stdout);
printf(": WARNING: max-element-width:%d desired:%d,%d maxSize:%d,%d\n",
maxElementWidth, aMetrics.width, aMetrics.height,
aState.mReflowState.availableWidth,
aState.mReflowState.availableHeight);
}
#endif
#ifdef DEBUG
if (gNoisyMaxElementWidth) {
if (aState.GetFlag(BRS_COMPUTEMAXELEMENTWIDTH)) {
IndentBy(stdout, gNoiseIndent);
if (NS_UNCONSTRAINEDSIZE == aState.mReflowState.availableWidth) {
printf("PASS1 ");
}
ListTag(stdout);
printf(": max-element-width:%d desired:%d,%d maxSize:%d,%d\n",
maxElementWidth, aMetrics.width, aMetrics.height,
aState.mReflowState.availableWidth,
aState.mReflowState.availableHeight);
}
}
#endif
// If we're requested to update our maximum width, then compute it
if (aState.GetFlag(BRS_COMPUTEMAXWIDTH)) {
if (!HaveAutoWidth(aReflowState) &&
aReflowState.mStylePosition->mWidth.GetUnit() != eStyleUnit_Percent) {
aMetrics.mMaximumWidth = aMetrics.width;
} else {
// We need to add in for the right border/padding
// The maximum width in the reflow state includes the left
// border/padding but not the right.
aMetrics.mMaximumWidth = aState.mMaximumWidth + borderPadding.right;
}
#ifdef NOISY_MAXIMUM_WIDTH
printf("nsBlockFrame::ComputeFinalSize block %p setting aMetrics.mMaximumWidth to %d\n", this, aMetrics.mMaximumWidth);
#endif
}
ComputeCombinedArea(aReflowState, aMetrics);
}
void
nsBlockFrame::ComputeCombinedArea(const nsHTMLReflowState& aReflowState,
nsHTMLReflowMetrics& aMetrics)
{
// Compute the combined area of our children
// XXX_perf: This can be done incrementally. It is currently one of
// the things that makes incremental reflow O(N^2).
nsRect area(0, 0, aMetrics.width, aMetrics.height);
if (NS_STYLE_OVERFLOW_CLIP != aReflowState.mStyleDisplay->mOverflowX) {
for (line_iterator line = begin_lines(), line_end = end_lines();
line != line_end;
++line) {
area.UnionRect(area, line->GetCombinedArea());
}
// Factor the bullet in; normally the bullet will be factored into
// the line-box's combined area. However, if the line is a block
// line then it won't; if there are no lines, it won't. So just
// factor it in anyway (it can't hurt if it was already done).
// XXXldb Can we just fix GetCombinedArea instead?
if (mBullet) {
area.UnionRect(area, mBullet->GetRect());
}
}
#ifdef NOISY_COMBINED_AREA
ListTag(stdout);
printf(": ca=%d,%d,%d,%d\n", area.x, area.y, area.width, area.height);
#endif
aMetrics.mOverflowArea = area;
}
nsresult
nsBlockFrame::PrepareInitialReflow(nsBlockReflowState& aState)
{
PrepareResizeReflow(aState);
return NS_OK;
}
nsresult
nsBlockFrame::PrepareChildIncrementalReflow(nsBlockReflowState& aState)
{
// XXXwaterson this is non-optimal. We'd rather do this in
// ReflowDirtyLines; however, I'm not quite ready to figure out how
// to deal with reflow path retargeting yet.
nsReflowPath *path = aState.mReflowState.path;
nsReflowPath::iterator iter = path->FirstChild();
nsReflowPath::iterator end = path->EndChildren();
for ( ; iter != end; ++iter) {
// Determine the line being impacted
line_iterator line = FindLineFor(*iter);
if (line == end_lines()) {
// This assertion actually fires on lots of pages
// (e.g., bugzilla, bugzilla query page), so limit it
// to a few people until we fix the problem causing it.
//
// I think waterson explained once why it was happening -- I think
// it has something to do with the interaction of the unconstrained
// reflow in multi-pass reflow with the reflow command's chain, but
// I don't remember the details.
#if defined(DEBUG_dbaron) || defined(DEBUG_waterson)
NS_NOTREACHED("We don't have a line for the target of the reflow. "
"Being inefficient");
#endif
// This can't happen, but just in case it does...
PrepareResizeReflow(aState);
continue;
}
if (line->IsInline()) {
if (aState.GetFlag(BRS_COMPUTEMAXWIDTH)) {
// We've been asked to compute the maximum width of the block
// frame, which ReflowLine() will handle by performing an
// unconstrained reflow on the line. If this incremental
// reflow is targeted at a continuing frame, we may have to
// retarget it, as the unconstrained reflow can destroy some
// of the continuations. This will allow the incremental
// reflow to arrive at the target frame during the first-pass
// unconstrained reflow.
nsIFrame *prevInFlow = (*iter)->GetPrevInFlow();
if (prevInFlow)
RetargetInlineIncrementalReflow(iter, line, prevInFlow);
}
}
// Mark this line dirty. We need to mark the previous line dirty
// if it is an inline line so that it can maybe pull up something
// from the just affected line.
MarkLineDirty(line);
}
return NS_OK;
}
void
nsBlockFrame::RetargetInlineIncrementalReflow(nsReflowPath::iterator &aTarget,
line_iterator &aLine,
nsIFrame *aPrevInFlow)
{
// To retarget the reflow, we'll walk back through the continuations
// until we reach the primary frame, or we reach a continuation that
// is preceded by a ``hard'' line break.
NS_ASSERTION(aLine->Contains(*aTarget),
"line doesn't contain the target of the incremental reflow");
// Now fix the iterator, keeping track of how many lines we walk
// back through.
PRInt32 lineCount = 0;
const line_iterator begin = begin_lines();
do {
// XXX this might happen if the block is split; e.g.,
// printing or print preview.
if (aLine == begin) {
#ifdef NS_DEBUG
if (GetParent() == aPrevInFlow->GetParent()) {
NS_ERROR("ran out of lines before we ran out of prev-in-flows");
}
else {
NS_ERROR("not yet implemented: retarget incremental reflow to"
" prev-in-flow with different parent");
}
#endif
break;
}
// Is the previous line a ``hard'' break? If so, stop: these
// continuations will be preserved during an unconstrained reflow.
// XXXwaterson should this be `!= NS_STYLE_CLEAR_NONE'?
--aLine;
if (aLine->GetBreakTypeAfter() == NS_STYLE_CLEAR_LINE)
break;
*aTarget = aPrevInFlow;
aPrevInFlow = aPrevInFlow->GetPrevInFlow();
#ifdef DEBUG
// Paranoia. Ensure that the prev-in-flow is really in the
// previous line.
line_iterator check = FindLineFor(*aTarget);
NS_ASSERTION(check == aLine, "prev-in-flow not in previous linebox");
#endif
++lineCount;
} while (aPrevInFlow);
if (lineCount > 0) {
// Fix any frames deeper in the reflow path.
#if 0
// XXXwaterson fix me! we've got to recurse through the iterator's
// kids. This really shouldn't matter unless we want to implement
// `display: inline-block' or do XBL form controls. Why, you ask?
// Because what will happen is that inline frames will get flowed
// with a resize reflow, which will be sufficient to mask any
// glitches that would otherwise occur. However, as soon as boxes
// or blocks end up in the flow here (and aren't explicit reflow
// roots), they may optimize away the resize reflow.
// Get the reflow path, which is stored as a stack (i.e., the next
// frame in the reflow is at the _end_ of the array).
nsVoidArray *path = aState.mReflowState.reflowCommand->GetPath();
for (PRInt32 i = path->Count() - 1; i >= 0; --i) {
nsIFrame *frame = NS_STATIC_CAST(nsIFrame *, path->ElementAt(i));
// Stop if we encounter a non-inline frame in the reflow path.
const nsStyleDisplay* display = frame->GetStyleDisplay();
if (NS_STYLE_DISPLAY_INLINE != display->mDisplay)
break;
// Walk back to the primary frame.
PRInt32 count = lineCount;
nsIFrame *prevInFlow;
do {
prevInFlow = frame->GetPrevInFlow();
} while (--count >= 0 && prevInFlow && (frame = prevInFlow));
path->ReplaceElementAt(frame, i);
}
#else
NS_WARNING("blowing an incremental reflow targeted at a nested inline");
#endif
}
}
nsresult
nsBlockFrame::MarkLineDirty(line_iterator aLine)
{
// Mark aLine dirty
aLine->MarkDirty();
#ifdef DEBUG
if (gNoisyReflow) {
IndentBy(stdout, gNoiseIndent);
ListTag(stdout);
printf(": mark line %p dirty\n", NS_STATIC_CAST(void*, aLine.get()));
}
#endif
// Mark previous line dirty if its an inline line so that it can
// maybe pullup something from the line just affected.
// XXX We don't need to do this if aPrevLine ends in a break-after...
if (aLine != mLines.front() &&
aLine->IsInline() &&
aLine.prev()->IsInline()) {
aLine.prev()->MarkDirty();
#ifdef DEBUG
if (gNoisyReflow) {
IndentBy(stdout, gNoiseIndent);
ListTag(stdout);
printf(": mark prev-line %p dirty\n",
NS_STATIC_CAST(void*, aLine.prev().get()));
}
#endif
}
return NS_OK;
}
nsresult
nsBlockFrame::UpdateBulletPosition(nsBlockReflowState& aState)
{
if (nsnull == mBullet) {
// Don't bother if there is no bullet
return NS_OK;
}
const nsStyleList* styleList = GetStyleList();
if (NS_STYLE_LIST_STYLE_POSITION_INSIDE == styleList->mListStylePosition) {
if (mBullet && HaveOutsideBullet()) {
// We now have an inside bullet, but used to have an outside
// bullet. Adjust the frame line list
if (! mLines.empty()) {
// if we have a line already, then move the bullet to the front of the
// first line
nsIFrame* child = nsnull;
nsLineBox* firstLine = mLines.front();
// bullet should not have any siblings if it was an outside bullet
NS_ASSERTION(!mBullet->GetNextSibling(), "outside bullet should not have siblings");
// move bullet to front and chain the previous frames, and update the line count
child = firstLine->mFirstChild;
firstLine->mFirstChild = mBullet;
mBullet->SetNextSibling(child);
PRInt32 count = firstLine->GetChildCount();
firstLine->SetChildCount(count+1);
// dirty it here in case the caller does not
firstLine->MarkDirty();
} else {
// no prior lines, just create a new line for the bullet
nsLineBox* line = aState.NewLineBox(mBullet, 1, PR_FALSE);
if (!line) {
return NS_ERROR_OUT_OF_MEMORY;
}
mLines.push_back(line);
}
}
mState &= ~NS_BLOCK_FRAME_HAS_OUTSIDE_BULLET;
}
else {
if (!HaveOutsideBullet()) {
// We now have an outside bullet, but used to have an inside
// bullet. Take the bullet frame out of the first lines frame
// list.
if ((! mLines.empty()) && (mBullet == mLines.front()->mFirstChild)) {
nsIFrame* next = mBullet->GetNextSibling();
mBullet->SetNextSibling(nsnull);
PRInt32 count = mLines.front()->GetChildCount() - 1;
NS_ASSERTION(count >= 0, "empty line w/o bullet");
mLines.front()->SetChildCount(count);
if (0 == count) {
nsLineBox* oldFront = mLines.front();
mLines.pop_front();
aState.FreeLineBox(oldFront);
if (! mLines.empty()) {
mLines.front()->MarkDirty();
}
}
else {
mLines.front()->mFirstChild = next;
mLines.front()->MarkDirty();
}
}
}
mState |= NS_BLOCK_FRAME_HAS_OUTSIDE_BULLET;
}
#ifdef DEBUG
VerifyLines(PR_TRUE);
#endif
return NS_OK;
}
nsresult
nsBlockFrame::PrepareStyleChangedReflow(nsBlockReflowState& aState)
{
nsresult rv = UpdateBulletPosition(aState);
// Mark everything dirty
for (line_iterator line = begin_lines(), line_end = end_lines();
line != line_end;
++line)
{
line->MarkDirty();
}
return rv;
}
nsresult
nsBlockFrame::PrepareResizeReflow(nsBlockReflowState& aState)
{
// See if we can try and avoid marking all the lines as dirty
PRBool tryAndSkipLines = PR_FALSE;
// we need to calculate if any part of then block itself
// is impacted by a float (bug 19579)
aState.GetAvailableSpace();
// See if this is a constrained resize reflow that is not impacted by floats
if ((! aState.IsImpactedByFloat()) &&
(aState.mReflowState.reason == eReflowReason_Resize) &&
(NS_UNCONSTRAINEDSIZE != aState.mReflowState.availableWidth)) {
// If the text is left-aligned, then we try and avoid reflowing the lines
const nsStyleText* styleText = GetStyleText();
if ((NS_STYLE_TEXT_ALIGN_LEFT == styleText->mTextAlign) ||
((NS_STYLE_TEXT_ALIGN_DEFAULT == styleText->mTextAlign) &&
(NS_STYLE_DIRECTION_LTR == aState.mReflowState.mStyleVisibility->mDirection))) {
tryAndSkipLines = PR_TRUE;
}
}
#ifdef DEBUG
if (gDisableResizeOpt) {
tryAndSkipLines = PR_FALSE;
}
if (gNoisyReflow) {
if (!tryAndSkipLines) {
const nsStyleText* styleText = GetStyleText();
IndentBy(stdout, gNoiseIndent);
ListTag(stdout);
printf(": marking all lines dirty: reason=%d availWidth=%d textAlign=%d\n",
aState.mReflowState.reason,
aState.mReflowState.availableWidth,
styleText->mTextAlign);
}
}
#endif
if (tryAndSkipLines) {
nscoord newAvailWidth = aState.mReflowState.mComputedBorderPadding.left;
if (NS_SHRINKWRAPWIDTH == aState.mReflowState.mComputedWidth) {
if (NS_UNCONSTRAINEDSIZE != aState.mReflowState.mComputedMaxWidth) {
newAvailWidth += aState.mReflowState.mComputedMaxWidth;
}
else {
newAvailWidth += aState.mReflowState.availableWidth;
}
} else {
if (NS_UNCONSTRAINEDSIZE != aState.mReflowState.mComputedWidth) {
newAvailWidth += aState.mReflowState.mComputedWidth;
}
else {
newAvailWidth += aState.mReflowState.availableWidth;
}
}
NS_ASSERTION(NS_UNCONSTRAINEDSIZE != newAvailWidth, "bad math, newAvailWidth is infinite");
#ifdef DEBUG
if (gNoisyReflow) {
IndentBy(stdout, gNoiseIndent);
ListTag(stdout);
printf(": trying to avoid marking all lines dirty\n");
}
#endif
for (line_iterator line = begin_lines(), line_end = end_lines();
line != line_end;
++line)
{
// We let child blocks make their own decisions the same
// way we are here.
if (line->IsBlock() ||
// XXXldb We need HasPercentageDescendant, not HasPercentageChild!!!
line->HasPercentageChild() ||
line->HasFloats() ||
(line != mLines.back() && !line->HasBreakAfter()) ||
line->ResizeReflowOptimizationDisabled() ||
line->IsImpactedByFloat() ||
(line->mBounds.XMost() > newAvailWidth)) {
line->MarkDirty();
}
#ifdef REALLY_NOISY_REFLOW
if (!line->IsBlock()) {
printf("PrepareResizeReflow thinks line %p is %simpacted by floats\n",
line.get(), line->IsImpactedByFloat() ? "" : "not ");
}
#endif
#ifdef DEBUG
if (gNoisyReflow && !line->IsDirty()) {
IndentBy(stdout, gNoiseIndent + 1);
printf("skipped: line=%p next=%p %s %s%s%s breakTypeBefore/After=%d/%d xmost=%d\n",
NS_STATIC_CAST(void*, line.get()),
NS_STATIC_CAST(void*, (line.next() != end_lines() ? line.next().get() : nsnull)),
line->IsBlock() ? "block" : "inline",
line->HasBreakAfter() ? "has-break-after " : "",
line->HasFloats() ? "has-floats " : "",
line->IsImpactedByFloat() ? "impacted " : "",
line->GetBreakTypeBefore(), line->GetBreakTypeAfter(),
line->mBounds.XMost());
}
#endif
}
}
else {
// Mark everything dirty
for (line_iterator line = begin_lines(), line_end = end_lines();
line != line_end;
++line)
{
line->MarkDirty();
}
}
return NS_OK;
}
//----------------------------------------
nsBlockFrame::line_iterator
nsBlockFrame::FindLineFor(nsIFrame* aFrame)
{
// This assertion actually fires on lots of pages (e.g., bugzilla,
// bugzilla query page), so limit it to a few people until we fix the
// problem causing it. It's related to the similarly |#ifdef|ed
// assertion in |PrepareChildIncrementalReflow|.
#if defined(DEBUG_dbaron) || defined(DEBUG_waterson)
NS_PRECONDITION(aFrame, "why pass a null frame?");
#endif
line_iterator line = begin_lines(),
line_end = end_lines();
for ( ; line != line_end; ++line) {
// If the target frame is in-flow, and this line contains the it,
// then we've found our line.
if (line->Contains(aFrame))
return line;
// If the target frame is floated, and this line contains the
// float's placeholder, then we've found our line.
if (line->HasFloats()) {
for (nsFloatCache *fc = line->GetFirstFloat();
fc != nsnull;
fc = fc->Next()) {
if (aFrame == fc->mPlaceholder->GetOutOfFlowFrame())
return line;
}
}
}
return line_end;
}
/**
* Propagate reflow "damage" from from earlier lines to the current
* line. The reflow damage comes from the following sources:
* 1. The regions of float damage remembered during reflow.
* 2. The combination of nonzero |aDeltaY| and any impact by a float,
* either the previous reflow or now.
*
* When entering this function, |aLine| is still at its old position and
* |aDeltaY| indicates how much it will later be slid (assuming it
* doesn't get marked dirty and reflowed entirely).
*/
void
nsBlockFrame::PropagateFloatDamage(nsBlockReflowState& aState,
nsLineBox* aLine,
nscoord aDeltaY)
{
NS_PRECONDITION(!aLine->IsDirty(), "should never be called on dirty lines");
// Check the damage region recorded in the float damage.
nsSpaceManager *spaceManager = aState.mReflowState.mSpaceManager;
if (spaceManager->HasFloatDamage()) {
nscoord lineYA = aLine->mBounds.y + aDeltaY;
nscoord lineYB = lineYA + aLine->mBounds.height;
if (spaceManager->IntersectsDamage(lineYA, lineYB)) {
aLine->MarkDirty();
return;
}
}
if (aDeltaY) {
// Cases we need to find:
//
// 1. the line was impacted by a float and now isn't
// 2. the line wasn't impacted by a float and now is
// 3. the line is impacted by a float both before and after and
// the float has changed position relative to the line (or it's
// a different float). (XXXPerf we don't currently
// check whether the float changed size. We currently just
// mark blocks dirty and ignore any possibility of damage to
// inlines by it being a different float with a different
// size.)
//
// XXXPerf: An optimization: if the line was and is completely
// impacted by a float and the float hasn't changed size,
// then we don't need to mark the line dirty.
aState.GetAvailableSpace(aLine->mBounds.y + aDeltaY, PR_FALSE);
PRBool wasImpactedByFloat = aLine->IsImpactedByFloat();
PRBool isImpactedByFloat = aState.IsImpactedByFloat();
#ifdef REALLY_NOISY_REFLOW
printf("nsBlockFrame::PropagateFloatDamage %p was = %d, is=%d\n",
this, wasImpactedByFloat, isImpactedByFloat);
#endif
// Mark the line dirty if:
// 1. It used to be impacted by a float and now isn't, or vice
// versa.
// 2. It is impacted by a float and it is a block, which means
// that more or less of the line could be impacted than was in
// the past. (XXXPerf This could be optimized further, since
// we're marking the whole line dirty.)
if ((wasImpactedByFloat != isImpactedByFloat) ||
(isImpactedByFloat && aLine->IsBlock())) {
aLine->MarkDirty();
}
}
}
static void
DirtyLinesWithDirtyContinuations(const nsLineList::iterator& aLineStart,
const nsLineList::iterator& aLineEnd)
{
// The line we're looking at right now
nsLineList::iterator line(aLineEnd);
// Whether the line following the current one is dirty
PRBool nextLineDirty = PR_FALSE;
while (line != aLineStart) {
--line;
if (nextLineDirty && line->IsInline() && line->IsLineWrapped()) {
line->MarkDirty();
// Note that nextLineDirty is already true and |line| will be the "next
// line" next time through this loop, and we just marked it dirty, so
// just leave nextLineDirty as true.
} else {
nextLineDirty = line->IsDirty();
}
}
}
static void PlaceFrameView(nsIFrame* aFrame);
static PRBool LineHasClear(nsLineBox* aLine) {
return aLine->GetBreakTypeBefore() || aLine->HasFloatBreakAfter()
|| (aLine->IsBlock() && (aLine->mFirstChild->GetStateBits() & NS_BLOCK_HAS_CLEAR_CHILDREN));
}
/**
* Reparent a whole list of floats from aOldParent to this block. The
* floats might be taken from aOldParent's overflow list. They will be
* removed from the list. They end up appended to our mFloats list.
*/
void
nsBlockFrame::ReparentFloats(nsIFrame* aFirstFrame,
nsBlockFrame* aOldParent, PRBool aFromOverflow,
PRBool aReparentSiblings) {
nsFrameList list;
nsIFrame* tail = nsnull;
aOldParent->CollectFloats(aFirstFrame, list, &tail, aFromOverflow, aReparentSiblings);
if (list.NotEmpty()) {
for (nsIFrame* f = list.FirstChild(); f; f = f->GetNextSibling()) {
ReparentFrame(f, aOldParent, this);
}
mFloats.AppendFrames(nsnull, list.FirstChild());
}
}
static void DumpLine(const nsBlockReflowState& aState, nsLineBox* aLine,
nscoord aDeltaY, PRInt32 aDeltaIndent) {
#ifdef DEBUG
if (nsBlockFrame::gNoisyReflow) {
nsRect lca(aLine->GetCombinedArea());
nsBlockFrame::IndentBy(stdout, nsBlockFrame::gNoiseIndent + aDeltaIndent);
printf("line=%p mY=%d dirty=%s oldBounds={%d,%d,%d,%d} oldCombinedArea={%d,%d,%d,%d} deltaY=%d mPrevBottomMargin=%d childCount=%d\n",
NS_STATIC_CAST(void*, aLine), aState.mY,
aLine->IsDirty() ? "yes" : "no",
aLine->mBounds.x, aLine->mBounds.y,
aLine->mBounds.width, aLine->mBounds.height,
lca.x, lca.y, lca.width, lca.height,
aDeltaY, aState.mPrevBottomMargin.get(), aLine->GetChildCount());
}
#endif
}
/**
* Reflow the dirty lines
*/
nsresult
nsBlockFrame::ReflowDirtyLines(nsBlockReflowState& aState, PRBool aTryPull)
{
nsresult rv = NS_OK;
PRBool keepGoing = PR_TRUE;
PRBool repositionViews = PR_FALSE; // should we really need this?
PRBool foundAnyClears = PR_FALSE;
#ifdef DEBUG
if (gNoisyReflow) {
if (aState.mReflowState.reason == eReflowReason_Incremental) {
IndentBy(stdout, gNoiseIndent);
ListTag(stdout);
printf(": incrementally reflowing dirty lines");
nsHTMLReflowCommand *command = aState.mReflowState.path->mReflowCommand;
if (command) {
printf(": type=%s(%d)", kReflowCommandType[command->Type()],
command->Type());
}
}
else {
IndentBy(stdout, gNoiseIndent);
ListTag(stdout);
printf(": reflowing dirty lines");
}
printf(" computedWidth=%d\n", aState.mReflowState.mComputedWidth);
}
AutoNoisyIndenter indent(gNoisyReflow);
#endif
// Check whether we need to do invalidation for the child block
PRBool doInvalidate =
aState.mReflowState.reason == eReflowReason_Incremental ||
aState.mReflowState.reason == eReflowReason_Dirty ||
aState.mReflowState.reason == eReflowReason_Resize;
// the amount by which we will slide the current line if it is not
// dirty
nscoord deltaY = 0;
// whether we did NOT reflow the previous line and thus we need to
// recompute the carried out margin before the line if we want to
// reflow it or if its previous margin is dirty
PRBool needToRecoverState = PR_FALSE;
PRBool reflowedFloat = PR_FALSE;
PRBool lastLineMovedUp = PR_FALSE;
// We save up information about BR-clearance here
PRUint8 inlineFloatBreakType = NS_STYLE_CLEAR_NONE;
line_iterator line = begin_lines(), line_end = end_lines();
// If we're supposed to update our maximum width, then we'll also need to
// reflow any line if it's line wrapped and has a dirty continuing line.
if (aState.GetFlag(BRS_COMPUTEMAXWIDTH)) {
::DirtyLinesWithDirtyContinuations(line, line_end);
}
// Reflow the lines that are already ours
for ( ; line != line_end; ++line, aState.AdvanceToNextLine()) {
DumpLine(aState, line, deltaY, 0);
#ifdef DEBUG
AutoNoisyIndenter indent2(gNoisyReflow);
#endif
// This really sucks, but we have to look inside any blocks that have clear
// elements inside them.
// XXX what can we do smarter here?
if (line->IsBlock() &&
(line->mFirstChild->GetStateBits() & NS_BLOCK_HAS_CLEAR_CHILDREN)) {
line->MarkDirty();
}
// We have to reflow the line if it's a block whose clearance
// might have changed, so detect that.
if (!line->IsDirty() && line->GetBreakTypeBefore() != NS_STYLE_CLEAR_NONE) {
nscoord curY = aState.mY;
// See where we would be after applying any clearance due to
// BRs.
if (inlineFloatBreakType != NS_STYLE_CLEAR_NONE) {
curY = aState.ClearFloats(curY, inlineFloatBreakType);
}
nscoord newY = aState.ClearFloats(curY, line->GetBreakTypeBefore());
if (line->HasClearance()) {
// Reflow the line if it might not have clearance anymore.
if (newY == curY
// aState.mY is the clearance point which should be the
// top border-edge of the block frame. If sliding the
// block by deltaY isn't going to put it in the predicted
// position, then we'd better reflow the line.
|| newY != line->mBounds.y + deltaY) {
line->MarkDirty();
}
} else {
// Reflow the line if the line might have clearance now.
if (curY != newY) {
line->MarkDirty();
}
}
}
// We might have to reflow a line that is after a clearing BR.
if (inlineFloatBreakType != NS_STYLE_CLEAR_NONE) {
aState.mY = aState.ClearFloats(aState.mY, inlineFloatBreakType);
if (aState.mY != line->mBounds.y + deltaY) {
// SlideLine is not going to put the line where the clearance
// put it. Reflow the line to be sure.
line->MarkDirty();
}
inlineFloatBreakType = NS_STYLE_CLEAR_NONE;
}
PRBool previousMarginWasDirty = line->IsPreviousMarginDirty();
if (previousMarginWasDirty) {
// If the previous margin is dirty, reflow the current line
line->MarkDirty();
line->ClearPreviousMarginDirty();
} else if (line->mBounds.YMost() + deltaY > aState.mBottomEdge) {
// Lines that aren't dirty but get slid past our height constraint must
// be reflowed.
line->MarkDirty();
}
if (!line->IsDirty()) {
// See if there's any reflow damage that requires that we mark the
// line dirty.
PropagateFloatDamage(aState, line, deltaY);
}
if (needToRecoverState && line->IsDirty()) {
// We need to reconstruct the bottom margin only if we didn't
// reflow the previous line and we do need to reflow (or repair
// the top position of) the next line.
aState.ReconstructMarginAbove(line);
}
if (needToRecoverState) {
needToRecoverState = PR_FALSE;
// Update aState.mPrevChild as if we had reflowed all of the frames in
// this line. This is expensive in some cases, since it requires
// walking |GetNextSibling|.
if (line->IsDirty())
aState.mPrevChild = line.prev()->LastChild();
}
// Now repair the line and update |aState.mY| by calling
// |ReflowLine| or |SlideLine|.
if (line->IsDirty()) {
lastLineMovedUp = PR_TRUE;
PRBool maybeReflowingForFirstTime =
line->mBounds.x == 0 && line->mBounds.y == 0 &&
line->mBounds.width == 0 && line->mBounds.height == 0;
// Compute the dirty lines "before" YMost, after factoring in
// the running deltaY value - the running value is implicit in
// aState.mY.
nscoord oldY = line->mBounds.y;
nscoord oldYMost = line->mBounds.YMost();
// Reflow the dirty line. If it's an incremental reflow, then force
// it to invalidate the dirty area if necessary
rv = ReflowLine(aState, line, aTryPull, &keepGoing, doInvalidate);
if (NS_FAILED(rv)) {
return rv;
}
if (line->HasFloats()) {
reflowedFloat = PR_TRUE;
}
if (!keepGoing) {
DumpLine(aState, line, deltaY, -1);
if (0 == line->GetChildCount()) {
DeleteLine(aState, line, line_end);
}
break;
}
// Test to see whether the margin that should be carried out
// to the next line (NL) might have changed. In ReflowBlockFrame
// we call nextLine->MarkPreviousMarginDirty if the block's
// actual carried-out bottom margin changed. So here we only
// need to worry about the following effects:
// 1) the line was just created, and it might now be blocking
// a carried-out bottom margin from previous lines that
// used to reach NL from reaching NL
// 2) the line used to be empty, and is now not empty,
// thus blocking a carried-out bottom margin from previous lines
// that used to reach NL from reaching NL
// 3) the line wasn't empty, but now is, so a carried-out
// bottom margin from previous lines that didn't used to reach NL
// now does
// 4) the line might have changed in a way that affects NL's
// ShouldApplyTopMargin decision. The three things that matter
// are the line's emptiness, its adjacency to the top of the block,
// and whether it has clearance (the latter only matters if the block
// was and is adjacent to the top and empty).
//
// If the line is empty now, we can't reliably tell if the line was empty
// before, so we just assume it was and do nextLine->MarkPreviousMarginDirty.
// This means the checks in 4) are redundant; if the line is empty now
// we don't need to check 4), but if the line is not empty now and we're sure
// it wasn't empty before, any adjacency and clearance changes are irrelevant
// to the result of nextLine->ShouldApplyTopMargin.
if (line.next() != end_lines()) {
PRBool maybeWasEmpty = oldY == oldYMost;
PRBool isEmpty = line->mBounds.height == 0 && line->CachedIsEmpty();
if (maybeReflowingForFirstTime /*1*/ ||
(isEmpty || maybeWasEmpty) /*2/3/4*/) {
line.next()->MarkPreviousMarginDirty();
// since it's marked dirty, nobody will care about |deltaY|
}
}
// If the line was just reflowed for the first time, then its
// old mBounds cannot be trusted so this deltaY computation is
// bogus. But that's OK because we just did
// MarkPreviousMarginDirty on the next line which will force it
// to be reflowed, so this computation of deltaY will not be
// used.
deltaY = line->mBounds.YMost() - oldYMost;
} else {
lastLineMovedUp = deltaY < 0;
if (deltaY != 0)
SlideLine(aState, line, deltaY);
else
repositionViews = PR_TRUE;
// XXX EVIL O(N^2) EVIL
aState.RecoverStateFrom(line, deltaY);
// Keep mY up to date in case we're propagating reflow damage
// and also because our final height may depend on it. If the
// line is inlines, then only update mY if the line is not
// empty, because that's what PlaceLine does. (Empty blocks may
// want to update mY, e.g. if they have clearance.)
if (line->IsBlock() || !line->CachedIsEmpty()) {
aState.mY = line->mBounds.YMost();
if (aState.GetFlag(BRS_SHRINKWRAPWIDTH)) {
// Mark the line as dirty so once we known the final shrink
// wrap width we can reflow the line to the correct size.
// It's OK to skip doing this for empty lines of inlines.
// XXX We don't always need to do this...
// XXX For inlines, we could record in the line box
// that HorzontalAlignFrames does not depend on the line width,
// and thus we don't have to mark it dirty here
line->MarkDirty();
aState.SetFlag(BRS_NEEDRESIZEREFLOW, PR_TRUE);
}
}
needToRecoverState = PR_TRUE;
}
// Record if we need to clear floats before reflowing the next
// line. Note that inlineFloatBreakType will be handled and
// cleared before the next line is processed, so there is no
// need to combine break types here.
if (line->HasFloatBreakAfter()) {
inlineFloatBreakType = line->GetBreakTypeAfter();
}
if (LineHasClear(line.get())) {
foundAnyClears = PR_TRUE;
}
DumpLine(aState, line, deltaY, -1);
}
if (needToRecoverState) {
// Is this expensive?
aState.ReconstructMarginAbove(line);
// Update aState.mPrevChild as if we had reflowed all of the frames in
// the last line. This is expensive in some cases, since it requires
// walking |GetNextSibling|.
aState.mPrevChild = line.prev()->LastChild();
}
// Should we really have to do this?
if (repositionViews)
::PlaceFrameView(this);
// We can skip trying to pull up the next line if there is no next
// in flow or we were told not to or we know it will be futile, i.e.,
// -- the next in flow is not changing
// -- and we cannot have added more space for its first line to be
// pulled up into,
// -- and it's a not a resize reflow (so our width didn't change),
// -- and we didn't reflow any floats (so the available space
// didn't change)
if (!aState.mNextInFlow || !aTryPull ||
(aState.mReflowState.mFlags.mNextInFlowUntouched &&
!lastLineMovedUp &&
(aState.mReflowState.reason == eReflowReason_Incremental ||
aState.mReflowState.reason == eReflowReason_Dirty) &&
!reflowedFloat)) {
if (aState.mNextInFlow) {
aState.mReflowStatus |= NS_FRAME_NOT_COMPLETE;
}
} else {
// Pull data from a next-in-flow if there's still room for more
// content here.
while (keepGoing && (nsnull != aState.mNextInFlow)) {
// Grab first line from our next-in-flow
nsBlockFrame* nextInFlow = aState.mNextInFlow;
line_iterator nifLine = nextInFlow->begin_lines();
nsLineBox *toMove;
PRBool collectOverflowFloats;
if (nifLine != nextInFlow->end_lines()) {
if (HandleOverflowPlaceholdersOnPulledLine(aState, nifLine)) {
// go around again in case the line was deleted
continue;
}
toMove = nifLine;
nextInFlow->mLines.erase(nifLine);
collectOverflowFloats = PR_FALSE;
} else {
// Grab an overflow line if there are any
nsLineList* overflowLines = nextInFlow->GetOverflowLines();
if (overflowLines &&
HandleOverflowPlaceholdersOnPulledLine(aState, overflowLines->front())) {
// go around again in case the line was deleted
continue;
}
if (!overflowLines) {
aState.mNextInFlow =
NS_STATIC_CAST(nsBlockFrame*, nextInFlow->mNextInFlow);
continue;
}
nifLine = overflowLines->begin();
NS_ASSERTION(nifLine != overflowLines->end(),
"Stored overflow line list should not be empty");
toMove = nifLine;
nextInFlow->RemoveOverflowLines();
nifLine = overflowLines->erase(nifLine);
if (nifLine != overflowLines->end()) {
// We need to this remove-and-put-back dance because we want
// to avoid making the overflow line list empty while it's
// stored in the property (because the property has the
// invariant that the list is never empty).
nextInFlow->SetOverflowLines(overflowLines);
}
collectOverflowFloats = PR_TRUE;
}
if (0 == toMove->GetChildCount()) {
// The line is empty. Try the next one.
NS_ASSERTION(nsnull == toMove->mFirstChild, "bad empty line");
aState.FreeLineBox(toMove);
continue;
}
// XXX move to a subroutine: run-in, overflow, pullframe and this do this
// Make the children in the line ours.
nsIFrame* frame = toMove->mFirstChild;
nsIFrame* lastFrame = nsnull;
PRInt32 n = toMove->GetChildCount();
while (--n >= 0) {
ReparentFrame(frame, nextInFlow, this);
lastFrame = frame;
frame = frame->GetNextSibling();
}
lastFrame->SetNextSibling(nsnull);
// Reparent floats whose placeholders are in the line.
ReparentFloats(toMove->mFirstChild, nextInFlow, collectOverflowFloats, PR_TRUE);
// Add line to our line list
if (aState.mPrevChild) {
aState.mPrevChild->SetNextSibling(toMove->mFirstChild);
}
line = mLines.before_insert(end_lines(), toMove);
DumpLine(aState, toMove, deltaY, 0);
#ifdef DEBUG
AutoNoisyIndenter indent2(gNoisyReflow);
#endif
// Now reflow it and any lines that it makes during it's reflow
// (we have to loop here because reflowing the line may case a new
// line to be created; see SplitLine's callers for examples of
// when this happens).
while (line != end_lines()) {
NS_ASSERTION(aTryPull, "We shouldn't be in here if we can't pull!");
rv = ReflowLine(aState, line, PR_TRUE, &keepGoing, doInvalidate);
if (NS_FAILED(rv)) {
NS_WARNING("Line reflow failed");
return rv;
}
DumpLine(aState, line, deltaY, -1);
if (!keepGoing) {
if (0 == line->GetChildCount()) {
DeleteLine(aState, line, line_end);
}
break;
}
if (LineHasClear(line.get())) {
foundAnyClears = PR_TRUE;
}
// If this is an inline frame then its time to stop
++line;
aState.AdvanceToNextLine();
}
}
if (NS_FRAME_IS_NOT_COMPLETE(aState.mReflowStatus)) {
aState.mReflowStatus |= NS_FRAME_REFLOW_NEXTINFLOW;
}
}
// Handle an odd-ball case: a list-item with no lines
if (mBullet && HaveOutsideBullet() && mLines.empty()) {
nsHTMLReflowMetrics metrics(nsnull);
ReflowBullet(aState, metrics);
// There are no lines so we have to fake up some y motion so that
// we end up with *some* height.
aState.mY += metrics.height;
}
if (foundAnyClears) {
AddStateBits(NS_BLOCK_HAS_CLEAR_CHILDREN);
} else {
RemoveStateBits(NS_BLOCK_HAS_CLEAR_CHILDREN);
}
#ifdef DEBUG
if (gNoisyReflow) {
IndentBy(stdout, gNoiseIndent - 1);
ListTag(stdout);
printf(": done reflowing dirty lines (status=%x)\n",
aState.mReflowStatus);
}
#endif
return rv;
}
void
nsBlockFrame::DeleteLine(nsBlockReflowState& aState,
nsLineList::iterator aLine,
nsLineList::iterator aLineEnd)
{
NS_PRECONDITION(0 == aLine->GetChildCount(), "can't delete !empty line");
if (0 == aLine->GetChildCount()) {
NS_ASSERTION(aState.mCurrentLine == aLine,
"using function more generally than designed, "
"but perhaps OK now");
nsLineBox *line = aLine;
aLine = mLines.erase(aLine);
aState.FreeLineBox(line);
// Mark the previous margin of the next line dirty since we need to
// recompute its top position.
if (aLine != aLineEnd)
aLine->MarkPreviousMarginDirty();
}
}
/**
* Takes two rectangles whose origins must be the same, and computes
* the difference between their union and their intersection as two
* rectangles. (This difference is a superset of the difference
* between the two rectangles.)
*/
static void GetRectDifferenceStrips(const nsRect& aR1, const nsRect& aR2,
nsRect* aHStrip, nsRect* aVStrip) {
NS_ASSERTION(aR1.TopLeft() == aR2.TopLeft(),
"expected rects at the same position");
nsRect unionRect(aR1.x, aR1.y, PR_MAX(aR1.width, aR2.width),
PR_MAX(aR1.height, aR2.height));
nscoord VStripStart = PR_MIN(aR1.width, aR2.width);
nscoord HStripStart = PR_MIN(aR1.height, aR2.height);
*aVStrip = unionRect;
aVStrip->x += VStripStart;
aVStrip->width -= VStripStart;
*aHStrip = unionRect;
aHStrip->y += HStripStart;
aHStrip->height -= HStripStart;
}
/**
* Reflow a line. The line will either contain a single block frame
* or contain 1 or more inline frames. aKeepReflowGoing indicates
* whether or not the caller should continue to reflow more lines.
*/
nsresult
nsBlockFrame::ReflowLine(nsBlockReflowState& aState,
line_iterator aLine,
PRBool aTryPull,
PRBool* aKeepReflowGoing,
PRBool aDamageDirtyArea)
{
nsresult rv = NS_OK;
NS_ABORT_IF_FALSE(aLine->GetChildCount(), "reflowing empty line");
// Setup the line-layout for the new line
aState.mCurrentLine = aLine;
aLine->ClearDirty();
aLine->InvalidateCachedIsEmpty();
// Now that we know what kind of line we have, reflow it
if (aLine->IsBlock()) {
nsRect oldBounds = aLine->mFirstChild->GetRect();
nsRect oldCombinedArea(aLine->GetCombinedArea());
rv = ReflowBlockFrame(aState, aLine, aKeepReflowGoing);
nsRect newBounds = aLine->mFirstChild->GetRect();
// We expect blocks to damage any area inside their bounds that is
// dirty; however, if the frame changes size or position then we
// need to do some repainting.
// XXX roc --- the above statement is ambiguous about whether 'bounds'
// means the frame's bounds or overflowArea, and in fact this is a source
// of much confusion and bugs. Thus the following hack considers *both*
// overflowArea and bounds. This should be considered a temporary hack
// until we decide how it's really supposed to work.
if (aDamageDirtyArea) {
nsRect lineCombinedArea(aLine->GetCombinedArea());
if (oldCombinedArea.TopLeft() != lineCombinedArea.TopLeft() ||
oldBounds.TopLeft() != newBounds.TopLeft()) {
// The block has moved, and so to be safe we need to repaint
// XXX We need to improve on this...
nsRect dirtyRect;
dirtyRect.UnionRect(oldCombinedArea, lineCombinedArea);
#ifdef NOISY_BLOCK_INVALIDATE
printf("%p invalidate 6 (%d, %d, %d, %d)\n",
this, dirtyRect.x, dirtyRect.y, dirtyRect.width, dirtyRect.height);
#endif
Invalidate(dirtyRect);
} else {
nsRect combinedAreaHStrip, combinedAreaVStrip;
nsRect boundsHStrip, boundsVStrip;
GetRectDifferenceStrips(oldBounds, newBounds,
&boundsHStrip, &boundsVStrip);
GetRectDifferenceStrips(oldCombinedArea, lineCombinedArea,
&combinedAreaHStrip, &combinedAreaVStrip);
#ifdef NOISY_BLOCK_INVALIDATE
printf("%p invalidate boundsVStrip (%d, %d, %d, %d)\n",
this, boundsVStrip.x, boundsVStrip.y, boundsVStrip.width, boundsVStrip.height);
printf("%p invalidate boundsHStrip (%d, %d, %d, %d)\n",
this, boundsHStrip.x, boundsHStrip.y, boundsHStrip.width, boundsHStrip.height);
printf("%p invalidate combinedAreaVStrip (%d, %d, %d, %d)\n",
this, combinedAreaVStrip.x, combinedAreaVStrip.y, combinedAreaVStrip.width, combinedAreaVStrip.height);
printf("%p invalidate combinedAreaHStrip (%d, %d, %d, %d)\n",
this, combinedAreaHStrip.x, combinedAreaHStrip.y, combinedAreaHStrip.width, combinedAreaHStrip.height);
#endif
// The first thing Invalidate does is check if the rect is empty, so
// don't bother doing that here.
Invalidate(boundsVStrip);
Invalidate(boundsHStrip);
Invalidate(combinedAreaVStrip);
Invalidate(combinedAreaHStrip);
}
}
}
else {
nsRect oldCombinedArea(aLine->GetCombinedArea());
aLine->SetLineWrapped(PR_FALSE);
// If we're supposed to update the maximum width, then we'll need to reflow
// the line with an unconstrained width (which will give us the new maximum
// width), then we'll reflow it again with the constrained width.
// We only do this if this is a beginning line, i.e., don't do this for
// lines associated with content that line wrapped (see ReflowDirtyLines()
// for details).
// XXX This approach doesn't work when floats are involved in which case
// we'll either need to recover the float state that applies to the
// unconstrained reflow or keep it around in a separate space manager...
PRBool isBeginningLine = aState.mCurrentLine == begin_lines() ||
!aState.mCurrentLine.prev()->IsLineWrapped();
// XXXldb Add &&!aState.GetFlag(BRS_UNCONSTRAINEDWIDTH)
// If we're not allowed to pull frames from our next-in-flow (e.g., during
// shrinkwrap) then we shouldn't be doing this.
if (aState.GetFlag(BRS_COMPUTEMAXWIDTH) && isBeginningLine && aTryPull) {
// First reflow the line with an unconstrained width.
nscoord oldY = aState.mY;
nsCollapsingMargin oldPrevBottomMargin(aState.mPrevBottomMargin);
PRBool oldUnconstrainedWidth = aState.GetFlag(BRS_UNCONSTRAINEDWIDTH);
#if defined(DEBUG_waterson) || defined(DEBUG_dbaron)
// XXXwaterson if oldUnconstrainedWidth was set, why do we need
// to do the second reflow, below?
if (oldUnconstrainedWidth)
printf("*** oldUnconstrainedWidth was already set.\n"
"*** This code (%s:%d) could be optimized a lot!\n"
"+++ possibly doing an unnecessary second-pass unconstrained "
"reflow\n",
__FILE__, __LINE__);
#endif
// When doing this we need to set the block reflow state's
// "mUnconstrainedWidth" variable to PR_TRUE so if we encounter
// a placeholder and then reflow its associated float we don't
// end up resetting the line's right edge and have it think the
// width is unconstrained...
aState.mSpaceManager->PushState();
aState.SetFlag(BRS_UNCONSTRAINEDWIDTH, PR_TRUE);
ReflowInlineFrames(aState, aLine, PR_TRUE, aKeepReflowGoing, aDamageDirtyArea, PR_TRUE);
aState.mY = oldY;
aState.mPrevBottomMargin = oldPrevBottomMargin;
aState.SetFlag(BRS_UNCONSTRAINEDWIDTH, oldUnconstrainedWidth);
aState.mSpaceManager->PopState();
// Update the line's maximum width
aLine->mMaximumWidth = aLine->mBounds.XMost();
#ifdef NOISY_MAXIMUM_WIDTH
printf("nsBlockFrame::ReflowLine block %p line %p setting aLine.mMaximumWidth to %d\n",
this, NS_STATIC_CAST(void*, aLine.get()), aLine->mMaximumWidth);
#endif
aState.UpdateMaximumWidth(aLine->mMaximumWidth);
// Now reflow the line again this time without having it compute
// the maximum width.
// We leave whether to compute max-element-width as-is, because
// making this call throws out the previous max-element-width
// information stored in the float cache.
nscoord oldComputeMaximumWidth = aState.GetFlag(BRS_COMPUTEMAXWIDTH);
aState.SetFlag(BRS_COMPUTEMAXWIDTH, PR_FALSE);
rv = ReflowInlineFrames(aState, aLine, PR_TRUE, aKeepReflowGoing, aDamageDirtyArea);
aState.SetFlag(BRS_COMPUTEMAXWIDTH, oldComputeMaximumWidth);
} else {
rv = ReflowInlineFrames(aState, aLine, aTryPull, aKeepReflowGoing, aDamageDirtyArea);
if (NS_SUCCEEDED(rv))
{
if (aState.GetFlag(BRS_COMPUTEMAXWIDTH))
{
#ifdef NOISY_MAXIMUM_WIDTH
printf("nsBlockFrame::ReflowLine block %p line %p setting aLine.mMaximumWidth to %d\n",
this, NS_STATIC_CAST(void*, aLine.get()), aLine->mMaximumWidth);
#endif
aState.UpdateMaximumWidth(aLine->mMaximumWidth);
}
if (aState.GetFlag(BRS_COMPUTEMAXELEMENTWIDTH))
{
#ifdef DEBUG
if (gNoisyMaxElementWidth) {
IndentBy(stdout, gNoiseIndent);
printf("nsBlockFrame::ReflowLine block %p line %p setting aLine.mMaxElementWidth to %d\n",
NS_STATIC_CAST(void*, this), NS_STATIC_CAST(void*, aLine.get()),
aLine->mMaxElementWidth);
}
#endif
aState.UpdateMaxElementWidth(aLine->mMaxElementWidth);
}
}
}
// We don't really know what changed in the line, so use the union
// of the old and new combined areas
if (aDamageDirtyArea) {
nsRect dirtyRect;
dirtyRect.UnionRect(oldCombinedArea, aLine->GetCombinedArea());
#ifdef NOISY_BLOCK_INVALIDATE
printf("%p invalidate because %s is true (%d, %d, %d, %d)\n",
this, aDamageDirtyArea ? "aDamageDirtyArea" : "aLine->IsForceInvalidate",
dirtyRect.x, dirtyRect.y, dirtyRect.width, dirtyRect.height);
if (aLine->IsForceInvalidate())
printf(" dirty line is %p\n", NS_STATIC_CAST(void*, aLine.get());
#endif
Invalidate(dirtyRect);
}
}
return rv;
}
/**
* Pull frame from the next available location (one of our lines or
* one of our next-in-flows lines).
*/
nsresult
nsBlockFrame::PullFrame(nsBlockReflowState& aState,
line_iterator aLine,
PRBool aDamageDeletedLines,
nsIFrame*& aFrameResult)
{
aFrameResult = nsnull;
// First check our remaining lines
if (end_lines() != aLine.next()) {
#ifdef DEBUG
PRBool retry =
#endif
PullFrameFrom(aState, aLine, this, PR_FALSE, aLine.next(),
aDamageDeletedLines, aFrameResult);
NS_ASSERTION(!retry, "Shouldn't have to retry in the current block");
return NS_OK;
}
NS_ASSERTION(!GetOverflowLines(),
"Our overflow lines should have been removed at the start of reflow");
// Try each next in flows
nsBlockFrame* nextInFlow = aState.mNextInFlow;
while (nextInFlow) {
// first normal lines, then overflow lines
if (!nextInFlow->mLines.empty()) {
if (PullFrameFrom(aState, aLine, nextInFlow, PR_FALSE,
nextInFlow->mLines.begin(),
aDamageDeletedLines, aFrameResult)) {
// try again with the same value of nextInFlow
continue;
}
break;
}
nsLineList* overflowLines = nextInFlow->GetOverflowLines();
if (overflowLines) {
if (PullFrameFrom(aState, aLine, nextInFlow, PR_TRUE,
overflowLines->begin(),
aDamageDeletedLines, aFrameResult)) {
// try again with the same value of nextInFlow
continue;
}
break;
}
nextInFlow = (nsBlockFrame*) nextInFlow->mNextInFlow;
aState.mNextInFlow = nextInFlow;
}
return NS_OK;
}
/**
* Try to pull a frame out of a line pointed at by aFromLine. If
* aUpdateGeometricParent is set then the pulled frames geometric parent
* will be updated (e.g. when pulling from a next-in-flows line list).
*
* Note: pulling a frame from a line that is a place-holder frame
* doesn't automatically remove the corresponding float from the
* line's float array. This happens indirectly: either the line gets
* emptied (and destroyed) or the line gets reflowed (because we mark
* it dirty) and the code at the top of ReflowLine empties the
* array. So eventually, it will be removed, just not right away.
*
* @return PR_TRUE to force retrying of the pull.
*/
PRBool
nsBlockFrame::PullFrameFrom(nsBlockReflowState& aState,
nsLineBox* aLine,
nsBlockFrame* aFromContainer,
PRBool aFromOverflowLine,
nsLineList::iterator aFromLine,
PRBool aDamageDeletedLines,
nsIFrame*& aFrameResult)
{
nsLineBox* fromLine = aFromLine;
NS_ABORT_IF_FALSE(fromLine, "bad line to pull from");
NS_ABORT_IF_FALSE(fromLine->GetChildCount(), "empty line");
NS_ABORT_IF_FALSE(aLine->GetChildCount(), "empty line");
NS_ASSERTION(fromLine->IsBlock() == fromLine->mFirstChild->GetStyleDisplay()->IsBlockLevel(),
"Disagreement about whether it's a block or not");
if (fromLine->IsBlock()) {
// If our line is not empty and the child in aFromLine is a block
// then we cannot pull up the frame into this line. In this case
// we stop pulling.
aFrameResult = nsnull;
}
else {
// Take frame from fromLine
nsIFrame* frame = fromLine->mFirstChild;
if (aFromContainer != this) {
if (HandleOverflowPlaceholdersForPulledFrame(aState, frame)) {
// we lost this one, retry
return PR_TRUE;
}
aLine->LastChild()->SetNextSibling(frame);
}
// when aFromContainer is 'this', then aLine->LastChild()'s next sibling
// is already set correctly.
aLine->SetChildCount(aLine->GetChildCount() + 1);
PRInt32 fromLineChildCount = fromLine->GetChildCount();
if (0 != --fromLineChildCount) {
// Mark line dirty now that we pulled a child
fromLine->SetChildCount(fromLineChildCount);
fromLine->MarkDirty();
fromLine->mFirstChild = frame->GetNextSibling();
}
else {
// Free up the fromLine now that it's empty
// Its bounds might need to be redrawn, though.
// XXX WHY do we invalidate the bounds AND the combined area? doesn't
// the combined area always enclose the bounds?
if (aDamageDeletedLines) {
Invalidate(fromLine->mBounds);
}
nsLineList* fromLineList = aFromOverflowLine
? aFromContainer->RemoveOverflowLines()
: &aFromContainer->mLines;
if (aFromLine.next() != fromLineList->end())
aFromLine.next()->MarkPreviousMarginDirty();
Invalidate(fromLine->GetCombinedArea());
fromLineList->erase(aFromLine);
// Note that aFromLine just got incremented, so don't use it again here!
aState.FreeLineBox(fromLine);
// Put any remaining overflow lines back.
if (aFromOverflowLine && !fromLineList->empty()) {
aFromContainer->SetOverflowLines(fromLineList);
}
}
// Change geometric parents
if (aFromContainer != this) {
// When pushing and pulling frames we need to check for whether any
// views need to be reparented
NS_ASSERTION(frame->GetParent() == aFromContainer, "unexpected parent frame");
ReparentFrame(frame, aFromContainer, this);
// The frame is being pulled from a next-in-flow; therefore we
// need to add it to our sibling list.
frame->SetNextSibling(nsnull);
if (nsnull != aState.mPrevChild) {
aState.mPrevChild->SetNextSibling(frame);
}
// The frame might have (or contain) floats that need to be
// brought over too.
ReparentFloats(frame, aFromContainer, aFromOverflowLine, PR_TRUE);
}
// Stop pulling because we found a frame to pull
aFrameResult = frame;
#ifdef DEBUG
VerifyLines(PR_TRUE);
#endif
}
return PR_FALSE;
}
static void
PlaceFrameView(nsIFrame* aFrame)
{
if (aFrame->HasView())
nsContainerFrame::PositionFrameView(aFrame);
else
nsContainerFrame::PositionChildViews(aFrame);
}
void
nsBlockFrame::SlideLine(nsBlockReflowState& aState,
nsLineBox* aLine, nscoord aDY)
{
NS_PRECONDITION(aDY != 0, "why slide a line nowhere?");
Invalidate(aLine->GetCombinedArea());
// Adjust line state
aLine->SlideBy(aDY);
Invalidate(aLine->GetCombinedArea());
// Adjust the frames in the line
nsIFrame* kid = aLine->mFirstChild;
if (!kid) {
return;
}
if (aLine->IsBlock()) {
if (aDY) {
nsPoint p = kid->GetPosition();
p.y += aDY;
kid->SetPosition(p);
}
// Make sure the frame's view and any child views are updated
::PlaceFrameView(kid);
}
else {
// Adjust the Y coordinate of the frames in the line.
// Note: we need to re-position views even if aDY is 0, because
// one of our parent frames may have moved and so the view's position
// relative to its parent may have changed
PRInt32 n = aLine->GetChildCount();
while (--n >= 0) {
if (aDY) {
nsPoint p = kid->GetPosition();
p.y += aDY;
kid->SetPosition(p);
}
// Make sure the frame's view and any child views are updated
::PlaceFrameView(kid);
kid = kid->GetNextSibling();
}
}
}
NS_IMETHODIMP
nsBlockFrame::AttributeChanged(nsIContent* aChild,
PRInt32 aNameSpaceID,
nsIAtom* aAttribute,
PRInt32 aModType)
{
nsresult rv = nsBlockFrameSuper::AttributeChanged(aChild, aNameSpaceID,
aAttribute, aModType);
if (NS_FAILED(rv)) {
return rv;
}
if (nsHTMLAtoms::start == aAttribute) {
nsPresContext* presContext = GetPresContext();
// XXX Not sure if this is necessary anymore
RenumberLists(presContext);
rv = presContext->PresShell()->
AppendReflowCommand(this, eReflowType_ContentChanged, nsnull);
}
else if (nsHTMLAtoms::value == aAttribute) {
const nsStyleDisplay* styleDisplay = GetStyleDisplay();
if (NS_STYLE_DISPLAY_LIST_ITEM == styleDisplay->mDisplay) {
nsIFrame* nextAncestor = mParent;
nsBlockFrame* blockParent = nsnull;
// Search for the closest ancestor that's a block frame. We
// make the assumption that all related list items share a
// common block parent.
// XXXldb I think that's a bad assumption.
while (nextAncestor) {
if (NS_OK == nextAncestor->QueryInterface(kBlockFrameCID,
(void**)&blockParent)) {
break;
}
nextAncestor = nextAncestor->GetParent();
}
// Tell the enclosing block frame to renumber list items within
// itself
if (nsnull != blockParent) {
nsPresContext* presContext = GetPresContext();
// XXX Not sure if this is necessary anymore
blockParent->RenumberLists(presContext);
rv = presContext->PresShell()->
AppendReflowCommand(blockParent, eReflowType_ContentChanged, nsnull);
}
}
}
return rv;
}
inline PRBool
IsPaddingZero(nsStyleUnit aUnit, nsStyleCoord &aCoord)
{
return (aUnit == eStyleUnit_Null ||
(aUnit == eStyleUnit_Coord && aCoord.GetCoordValue() == 0) ||
(aUnit == eStyleUnit_Percent && aCoord.GetPercentValue() == 0.0));
}
inline PRBool
IsMarginZero(nsStyleUnit aUnit, nsStyleCoord &aCoord)
{
return (aUnit == eStyleUnit_Null ||
aUnit == eStyleUnit_Auto ||
(aUnit == eStyleUnit_Coord && aCoord.GetCoordValue() == 0) ||
(aUnit == eStyleUnit_Percent && aCoord.GetPercentValue() == 0.0));
}
/* virtual */ PRBool
nsBlockFrame::IsSelfEmpty()
{
const nsStylePosition* position = GetStylePosition();
switch (position->mMinHeight.GetUnit()) {
case eStyleUnit_Coord:
if (position->mMinHeight.GetCoordValue() != 0)
return PR_FALSE;
break;
case eStyleUnit_Percent:
if (position->mMinHeight.GetPercentValue() != 0.0f)
return PR_FALSE;
break;
default:
return PR_FALSE;
}
switch (position->mHeight.GetUnit()) {
case eStyleUnit_Auto:
break;
case eStyleUnit_Coord:
if (position->mHeight.GetCoordValue() != 0)
return PR_FALSE;
break;
case eStyleUnit_Percent:
if (position->mHeight.GetPercentValue() != 0.0f)
return PR_FALSE;
break;
default:
return PR_FALSE;
}
const nsStyleBorder* border = GetStyleBorder();
const nsStylePadding* padding = GetStylePadding();
nsStyleCoord coord;
if (border->GetBorderWidth(NS_SIDE_TOP) != 0 ||
border->GetBorderWidth(NS_SIDE_BOTTOM) != 0 ||
!IsPaddingZero(padding->mPadding.GetTopUnit(),
padding->mPadding.GetTop(coord)) ||
!IsPaddingZero(padding->mPadding.GetBottomUnit(),
padding->mPadding.GetBottom(coord))) {
return PR_FALSE;
}
return PR_TRUE;
}
PRBool
nsBlockFrame::IsEmpty()
{
if (!IsSelfEmpty()) {
return PR_FALSE;
}
for (line_iterator line = begin_lines(), line_end = end_lines();
line != line_end;
++line)
{
if (!line->IsEmpty())
return PR_FALSE;
}
return PR_TRUE;
}
PRBool
nsBlockFrame::ShouldApplyTopMargin(nsBlockReflowState& aState,
nsLineBox* aLine)
{
if (aState.GetFlag(BRS_APPLYTOPMARGIN)) {
// Apply short-circuit check to avoid searching the line list
return PR_TRUE;
}
if (!aState.IsAdjacentWithTop()) {
// If we aren't at the top Y coordinate then something of non-zero
// height must have been placed. Therefore the childs top-margin
// applies.
aState.SetFlag(BRS_APPLYTOPMARGIN, PR_TRUE);
return PR_TRUE;
}
// Determine if this line is "essentially" the first line
for (line_iterator line = begin_lines(); line != aLine; ++line) {
if (!line->CachedIsEmpty() || line->HasClearance()) {
// A line which preceeds aLine is non-empty, or has clearance,
// so therefore the top margin applies.
aState.SetFlag(BRS_APPLYTOPMARGIN, PR_TRUE);
return PR_TRUE;
}
// No need to apply the top margin if the line has floats. We
// should collapse anyway (bug 44419)
}
// The line being reflowed is "essentially" the first line in the
// block. Therefore its top-margin will be collapsed by the
// generational collapsing logic with its parent (us).
return PR_FALSE;
}
nsIFrame*
nsBlockFrame::GetTopBlockChild(nsPresContext* aPresContext)
{
if (mLines.empty())
return nsnull;
nsLineBox *firstLine = mLines.front();
if (firstLine->IsBlock())
return firstLine->mFirstChild;
if (!firstLine->CachedIsEmpty())
return nsnull;
line_iterator secondLine = begin_lines();
++secondLine;
if (secondLine == end_lines() || !secondLine->IsBlock())
return nsnull;
return secondLine->mFirstChild;
}
// If placeholders/floats split during reflowing a line, but that line will
// be put on the next page, then put the placeholders/floats back the way
// they were before the line was reflowed.
void
nsBlockFrame::UndoSplitPlaceholders(nsBlockReflowState& aState,
nsIFrame* aLastPlaceholder)
{
nsIFrame* undoPlaceholder;
if (aLastPlaceholder) {
undoPlaceholder = aLastPlaceholder->GetNextSibling();
aLastPlaceholder->SetNextSibling(nsnull);
}
else {
undoPlaceholder = aState.mOverflowPlaceholders.FirstChild();
aState.mOverflowPlaceholders.SetFrames(nsnull);
}
// remove the next in flows of the placeholders that need to be removed
for (nsPlaceholderFrame* placeholder = NS_STATIC_CAST(nsPlaceholderFrame*, undoPlaceholder);
placeholder; ) {
NS_ASSERTION(!placeholder->GetNextInFlow(), "Must be the last placeholder");
nsFrameManager* fm = aState.mPresContext->GetPresShell()->FrameManager();
fm->UnregisterPlaceholderFrame(placeholder);
placeholder->SetOutOfFlowFrame(nsnull);
// XXX we probably should be doing something with oof here. But what?
nsSplittableFrame::RemoveFromFlow(placeholder);
nsIFrame* savePlaceholder = placeholder;
placeholder = NS_STATIC_CAST(nsPlaceholderFrame*, placeholder->GetNextSibling());
savePlaceholder->Destroy(aState.mPresContext);
}
}
nsresult
nsBlockFrame::ReflowBlockFrame(nsBlockReflowState& aState,
line_iterator aLine,
PRBool* aKeepReflowGoing)
{
NS_PRECONDITION(*aKeepReflowGoing, "bad caller");
nsresult rv = NS_OK;
nsIFrame* frame = aLine->mFirstChild;
if (!frame) {
NS_ASSERTION(PR_FALSE, "program error - unexpected empty line");
return NS_ERROR_NULL_POINTER;
}
// Prepare the block reflow engine
const nsStyleDisplay* display = frame->GetStyleDisplay();
nsBlockReflowContext brc(aState.mPresContext, aState.mReflowState,
aState.GetFlag(BRS_COMPUTEMAXELEMENTWIDTH),
aState.GetFlag(BRS_COMPUTEMAXWIDTH));
PRUint8 breakType = display->mBreakType;
// If a float split and its prev-in-flow was followed by a <BR>, then combine
// the <BR>'s break type with the block's break type (the block will be the very
// next frame after the split float).
if (NS_STYLE_CLEAR_NONE != aState.mFloatBreakType) {
breakType = nsLayoutUtils::CombineBreakType(breakType,
aState.mFloatBreakType);
aState.mFloatBreakType = NS_STYLE_CLEAR_NONE;
}
// Clear past floats before the block if the clear style is not none
aLine->SetBreakTypeBefore(breakType);
// See if we should apply the top margin. If the block frame being
// reflowed is a continuation (non-null prev-in-flow) then we don't
// apply its top margin because its not significant. Otherwise, dig
// deeper.
PRBool applyTopMargin =
!frame->GetPrevInFlow() && ShouldApplyTopMargin(aState, aLine);
if (applyTopMargin) {
// The HasClearance setting is only valid if ShouldApplyTopMargin
// returned PR_FALSE (in which case the top-margin-root set our
// clearance flag). Otherwise clear it now. We'll set it later on
// ourselves if necessary.
aLine->ClearHasClearance();
}
PRBool treatWithClearance = aLine->HasClearance();
// If our top margin was counted as part of some parents top-margin
// collapse and we are being speculatively reflowed assuming this
// frame DID NOT need clearance, then we need to check that
// assumption.
if (!treatWithClearance && !applyTopMargin && breakType != NS_STYLE_CLEAR_NONE &&
aState.mReflowState.mDiscoveredClearance) {
nscoord curY = aState.mY + aState.mPrevBottomMargin.get();
nscoord clearY = aState.ClearFloats(curY, breakType);
if (clearY != curY) {
// Looks like that assumption was invalid, we do need
// clearance. Tell our ancestor so it can reflow again. It is
// responsible for actually setting our clearance flag before
// the next reflow.
treatWithClearance = PR_TRUE;
// Only record the first frame that requires clearance
if (!*aState.mReflowState.mDiscoveredClearance) {
*aState.mReflowState.mDiscoveredClearance = frame;
}
// Exactly what we do now is flexible since we'll definitely be
// reflowed.
}
}
if (treatWithClearance) {
applyTopMargin = PR_TRUE;
}
nsIFrame* clearanceFrame = nsnull;
nscoord startingY = aState.mY;
nsCollapsingMargin incomingMargin = aState.mPrevBottomMargin;
nscoord clearance;
while (PR_TRUE) {
clearance = 0;
nscoord topMargin = 0;
PRBool mayNeedRetry = PR_FALSE;
if (applyTopMargin) {
// Precompute the blocks top margin value so that we can get the
// correct available space (there might be a float that's
// already been placed below the aState.mPrevBottomMargin
// Setup a reflowState to get the style computed margin-top
// value. We'll use a reason of `resize' so that we don't fudge
// any incremental reflow state.
// The availSpace here is irrelevant to our needs - all we want
// out if this setup is the margin-top value which doesn't depend
// on the childs available space.
// XXX building a complete nsHTMLReflowState just to get the margin-top
// seems like a waste. And we do this for almost every block!
nsSize availSpace(aState.mContentArea.width, NS_UNCONSTRAINEDSIZE);
nsHTMLReflowState reflowState(aState.mPresContext, aState.mReflowState,
frame, availSpace, eReflowReason_Resize);
if (treatWithClearance) {
aState.mY += aState.mPrevBottomMargin.get();
aState.mPrevBottomMargin.Zero();
}
// Now compute the collapsed margin-top value into aState.mPrevBottomMargin, assuming
// that all child margins collapse down to clearanceFrame.
nsBlockReflowContext::ComputeCollapsedTopMargin(reflowState,
&aState.mPrevBottomMargin, clearanceFrame, &mayNeedRetry);
// XXX optimization; we could check the collapsing children to see if they are sure
// to require clearance, and so avoid retrying them
if (clearanceFrame) {
// Don't allow retries on the second pass. The clearance decisions for the
// blocks whose top-margins collapse with ours are now fixed.
mayNeedRetry = PR_FALSE;
}
if (!treatWithClearance && !clearanceFrame && breakType != NS_STYLE_CLEAR_NONE) {
// We don't know if we need clearance and this is the first,
// optimistic pass. So determine whether *this block* needs
// clearance. Note that we do not allow the decision for whether
// this block has clearance to change on the second pass; that
// decision is only allowed to be made under the optimistic
// first pass.
nscoord curY = aState.mY + aState.mPrevBottomMargin.get();
nscoord clearY = aState.ClearFloats(curY, breakType);
if (clearY != curY) {
// Looks like we need clearance and we didn't know about it already. So
// recompute collapsed margin
treatWithClearance = PR_TRUE;
// Remember this decision, needed for incremental reflow
aLine->SetHasClearance();
// Apply incoming margins
aState.mY += aState.mPrevBottomMargin.get();
aState.mPrevBottomMargin.Zero();
// Compute the collapsed margin again, ignoring the incoming margin this time
mayNeedRetry = PR_FALSE;
nsBlockReflowContext::ComputeCollapsedTopMargin(reflowState,
&aState.mPrevBottomMargin, clearanceFrame, &mayNeedRetry);
}
}
// Temporarily advance the running Y value so that the
// GetAvailableSpace method will return the right available
// space. This undone as soon as the horizontal margins are
// computed.
topMargin = aState.mPrevBottomMargin.get();
if (treatWithClearance) {
nscoord currentY = aState.mY;
// advance mY to the clear position.
aState.mY = aState.ClearFloats(aState.mY, breakType);
// Compute clearance. It's the amount we need to add to the top
// border-edge of the frame, after applying collapsed margins
// from the frame and its children, to get it to line up with
// the bottom of the floats. The former is currentY + topMargin,
// the latter is the current aState.mY.
// Note that negative clearance is possible
clearance = aState.mY - (currentY + topMargin);
// Add clearance to our top margin while we compute available
// space for the frame
topMargin += clearance;
// Note that aState.mY should stay where it is: at the top
// border-edge of the frame
} else {
// Advance aState.mY to the top border-edge of the frame.
aState.mY += topMargin;
}
}
// Here aState.mY is the top border-edge of the block.
// Compute the available space for the block
aState.GetAvailableSpace();
#ifdef REALLY_NOISY_REFLOW
printf("setting line %p isImpacted to %s\n", aLine.get(), aState.IsImpactedByFloat()?"true":"false");
#endif
PRBool isImpacted = aState.IsImpactedByFloat() ? PR_TRUE : PR_FALSE;
aLine->SetLineIsImpactedByFloat(isImpacted);
nsSplittableType splitType = NS_FRAME_NOT_SPLITTABLE;
frame->IsSplittable(splitType);
nsRect availSpace;
aState.ComputeBlockAvailSpace(frame, splitType, display, availSpace);
// Now put the Y coordinate back to the top of the top-margin +
// clearance, and flow the block.
aState.mY -= topMargin;
availSpace.y -= topMargin;
if (NS_UNCONSTRAINEDSIZE != availSpace.height) {
availSpace.height += topMargin;
}
// keep track of the last overflow float in case we need to undo any new additions
nsIFrame* lastPlaceholder = aState.mOverflowPlaceholders.LastChild();
// Reflow the block into the available space
nsMargin computedOffsets;
// construct the html reflow state for the block. ReflowBlock
// will initialize it
nsHTMLReflowState blockHtmlRS(aState.mPresContext, aState.mReflowState, frame,
nsSize(availSpace.width, availSpace.height),
aState.mReflowState.reason, PR_TRUE);
blockHtmlRS.mFlags.mHasClearance = aLine->HasClearance();
if (mayNeedRetry) {
blockHtmlRS.mDiscoveredClearance = &clearanceFrame;
aState.mSpaceManager->PushState();
} else if (!applyTopMargin) {
blockHtmlRS.mDiscoveredClearance = aState.mReflowState.mDiscoveredClearance;
}
nsReflowStatus frameReflowStatus = NS_FRAME_COMPLETE;
rv = brc.ReflowBlock(availSpace, applyTopMargin, aState.mPrevBottomMargin,
clearance, aState.IsAdjacentWithTop(), computedOffsets,
blockHtmlRS, frameReflowStatus);
// Remove the frame from the reflow tree.
if (aState.mReflowState.path)
aState.mReflowState.path->RemoveChild(frame);
if (NS_FAILED(rv)) {
return rv;
}
if (mayNeedRetry) {
if (clearanceFrame) {
UndoSplitPlaceholders(aState, lastPlaceholder);
aState.mSpaceManager->PopState();
aState.mY = startingY;
aState.mPrevBottomMargin = incomingMargin;
continue;
} else {
// pop the saved state off the stack and discard it, because we
// want to keep the current state, since our speculation
// succeeded
aState.mSpaceManager->DiscardState();
}
}
aState.mPrevChild = frame;
#if defined(REFLOW_STATUS_COVERAGE)
RecordReflowStatus(PR_TRUE, frameReflowStatus);
#endif
if (NS_INLINE_IS_BREAK_BEFORE(frameReflowStatus)) {
// None of the child block fits.
UndoSplitPlaceholders(aState, lastPlaceholder);
PushLines(aState, aLine.prev());
*aKeepReflowGoing = PR_FALSE;
aState.mReflowStatus = NS_FRAME_NOT_COMPLETE;
}
else {
// Note: line-break-after a block is a nop
// Try to place the child block.
// Don't force the block to fit if we have positive clearance, because
// pushing it to the next page would give it more room.
// Don't force the block to fit if it's impacted by a float. If it is,
// then pushing it to the next page would give it more room. Note that
// isImpacted doesn't include impact from the block's own floats.
PRBool forceFit = aState.IsAdjacentWithTop() && clearance <= 0 &&
!isImpacted;
nsCollapsingMargin collapsedBottomMargin;
nsRect combinedArea(0,0,0,0);
*aKeepReflowGoing = brc.PlaceBlock(blockHtmlRS, forceFit, aLine.get(),
computedOffsets, collapsedBottomMargin,
aLine->mBounds, combinedArea, frameReflowStatus);
if (aLine->SetCarriedOutBottomMargin(collapsedBottomMargin)) {
line_iterator nextLine = aLine;
++nextLine;
if (nextLine != end_lines()) {
nextLine->MarkPreviousMarginDirty();
}
}
if (aState.GetFlag(BRS_SHRINKWRAPWIDTH)) {
// Mark the line as dirty so once we known the final shrink wrap width
// we can reflow the block to the correct size
// XXX We don't always need to do this...
aLine->MarkDirty();
aState.SetFlag(BRS_NEEDRESIZEREFLOW, PR_TRUE);
}
if (aState.GetFlag(BRS_UNCONSTRAINEDWIDTH) || aState.GetFlag(BRS_SHRINKWRAPWIDTH)) {
// Add the right margin to the line's bounds. That way it will be
// taken into account when we compute our shrink wrap size.
nscoord marginRight = brc.GetMargin().right;
if (marginRight != NS_UNCONSTRAINEDSIZE) {
aLine->mBounds.width += marginRight;
}
}
aLine->SetCombinedArea(combinedArea);
if (*aKeepReflowGoing) {
// Some of the child block fit
// Advance to new Y position
nscoord newY = aLine->mBounds.YMost();
aState.mY = newY;
// Continue the block frame now if it didn't completely fit in
// the available space.
if (NS_FRAME_IS_NOT_COMPLETE(frameReflowStatus)) {
PRBool madeContinuation;
rv = CreateContinuationFor(aState, nsnull, frame, madeContinuation);
if (NS_FAILED(rv))
return rv;
nsIFrame* nextFrame = frame->GetNextInFlow();
// Push continuation to a new line, but only if we actually made one.
if (madeContinuation) {
nsLineBox* line = aState.NewLineBox(nextFrame, 1, PR_TRUE);
if (nsnull == line) {
return NS_ERROR_OUT_OF_MEMORY;
}
mLines.after_insert(aLine, line);
}
// Advance to next line since some of the block fit. That way
// only the following lines will be pushed.
PushLines(aState, aLine);
aState.mReflowStatus = NS_FRAME_NOT_COMPLETE;
// If we need to reflow the continuation of the block child,
// then we'd better reflow our continuation
if (frameReflowStatus & NS_FRAME_REFLOW_NEXTINFLOW) {
aState.mReflowStatus |= NS_FRAME_REFLOW_NEXTINFLOW;
// We also need to make that continuation's line dirty so
// it gets reflowed when we reflow our next in flow. The
// nif's line must always be either a line of the nif's
// parent block (only if we didn't make a continuation) or
// else one of our own overflow lines. In the latter case
// the line is already marked dirty, so just handle the
// first case.
if (!madeContinuation) {
nsBlockFrame* nifBlock = NS_STATIC_CAST(nsBlockFrame*, nextFrame->GetParent());
NS_ASSERTION(nifBlock->GetType() == nsLayoutAtoms::blockFrame
|| nifBlock->GetType() == nsLayoutAtoms::areaFrame,
"A block's child's next in flow's parent must be a block!");
for (line_iterator line = nifBlock->begin_lines(),
line_end = nifBlock->end_lines(); line != line_end; ++line) {
if (line->Contains(nextFrame)) {
line->MarkDirty();
break;
}
}
}
}
*aKeepReflowGoing = PR_FALSE;
// The bottom margin for a block is only applied on the last
// flow block. Since we just continued the child block frame,
// we know that line->mFirstChild is not the last flow block
// therefore zero out the running margin value.
#ifdef NOISY_VERTICAL_MARGINS
ListTag(stdout);
printf(": reflow incomplete, frame=");
nsFrame::ListTag(stdout, frame);
printf(" prevBottomMargin=%d, setting to zero\n",
aState.mPrevBottomMargin);
#endif
aState.mPrevBottomMargin.Zero();
}
else {
#ifdef NOISY_VERTICAL_MARGINS
ListTag(stdout);
printf(": reflow complete for ");
nsFrame::ListTag(stdout, frame);
printf(" prevBottomMargin=%d collapsedBottomMargin=%d\n",
aState.mPrevBottomMargin, collapsedBottomMargin.get());
#endif
aState.mPrevBottomMargin = collapsedBottomMargin;
}
#ifdef NOISY_VERTICAL_MARGINS
ListTag(stdout);
printf(": frame=");
nsFrame::ListTag(stdout, frame);
printf(" carriedOutBottomMargin=%d collapsedBottomMargin=%d => %d\n",
brc.GetCarriedOutBottomMargin(), collapsedBottomMargin.get(),
aState.mPrevBottomMargin);
#endif
// Post-process the "line"
nscoord maxElementWidth = 0;
if (aState.GetFlag(BRS_COMPUTEMAXELEMENTWIDTH)) {
maxElementWidth = brc.GetMaxElementWidth();
}
// If we asked the block to update its maximum width, then record the
// updated value in the line, and update the current maximum width
if (aState.GetFlag(BRS_COMPUTEMAXWIDTH)) {
// The maximum width in the line box includes the left
// border/padding of this block, but not the right.
aLine->mMaximumWidth = brc.GetMaximumWidth() + availSpace.x;
aState.UpdateMaximumWidth(aLine->mMaximumWidth);
}
PostPlaceLine(aState, aLine, maxElementWidth);
// If the block frame that we just reflowed happens to be our
// first block, then its computed ascent is ours
if (frame == GetTopBlockChild(aState.mPresContext)) {
const nsHTMLReflowMetrics& metrics = brc.GetMetrics();
mAscent = metrics.ascent;
}
// Place the "marker" (bullet) frame.
//
// According to the CSS2 spec, section 12.6.1, the "marker" box
// participates in the height calculation of the list-item box's
// first line box.
//
// There are exactly two places a bullet can be placed: near the
// first or second line. Its only placed on the second line in a
// rare case: an empty first line followed by a second line that
// contains a block (example: <LI>\n<P>... ). This is where
// the second case can happen.
if (mBullet && HaveOutsideBullet() &&
((aLine == mLines.front()) ||
((0 == mLines.front()->mBounds.height) &&
(aLine == begin_lines().next())))) {
// Reflow the bullet
nsHTMLReflowMetrics metrics(nsnull);
ReflowBullet(aState, metrics);
// Doing the alignment using |mAscent| will also cater for bullets
// that are placed next to a child block (bug 92896)
// (Note that mAscent should be set by now, otherwise why would
// we be placing the bullet yet?)
// Tall bullets won't look particularly nice here...
nsRect bbox = mBullet->GetRect();
nscoord bulletTopMargin = applyTopMargin
? collapsedBottomMargin.get()
: 0;
bbox.y = aState.BorderPadding().top + mAscent -
metrics.ascent + bulletTopMargin;
mBullet->SetRect(bbox);
}
}
else {
// None of the block fits. Determine the correct reflow status.
if (aLine == mLines.front()) {
// If it's our very first line then we need to be pushed to
// our parents next-in-flow. Therefore, return break-before
// status for our reflow status.
aState.mReflowStatus = NS_INLINE_LINE_BREAK_BEFORE();
}
else {
// Push the line that didn't fit and any lines that follow it
// to our next-in-flow.
UndoSplitPlaceholders(aState, lastPlaceholder);
PushLines(aState, aLine.prev());
aState.mReflowStatus = NS_FRAME_NOT_COMPLETE;
}
}
}
break; // out of the reflow retry loop
}
#ifdef DEBUG
VerifyLines(PR_TRUE);
#endif
return rv;
}
#define LINE_REFLOW_OK 0
#define LINE_REFLOW_STOP 1
#define LINE_REFLOW_REDO 2
// a frame was complete, but truncated and not at the top of a page
#define LINE_REFLOW_TRUNCATED 3
nsresult
nsBlockFrame::ReflowInlineFrames(nsBlockReflowState& aState,
line_iterator aLine,
PRBool aTryPull,
PRBool* aKeepReflowGoing,
PRBool aDamageDirtyArea,
PRBool aUpdateMaximumWidth)
{
nsresult rv = NS_OK;
*aKeepReflowGoing = PR_TRUE;
#ifdef DEBUG
PRInt32 spins = 0;
#endif
PRUint8 lineReflowStatus = LINE_REFLOW_REDO;
PRBool didRedo = PR_FALSE;
do {
// Once upon a time we allocated the first 30 nsLineLayout objects
// on the stack, and then we switched to the heap. At that time
// these objects were large (1100 bytes on a 32 bit system).
// Then the nsLineLayout object was shrunk to 156 bytes by
// removing some internal buffers. Given that it is so much
// smaller, the complexity of 2 different ways of allocating
// no longer makes sense. Now we always allocate on the stack
nsLineLayout lineLayout(aState.mPresContext,
aState.mReflowState.mSpaceManager,
&aState.mReflowState,
aState.GetFlag(BRS_COMPUTEMAXELEMENTWIDTH));
lineLayout.Init(&aState, aState.mMinLineHeight, aState.mLineNumber);
rv = DoReflowInlineFrames(aState, lineLayout, aLine,
aKeepReflowGoing, &lineReflowStatus,
aUpdateMaximumWidth, aDamageDirtyArea, aTryPull);
lineLayout.EndLineReflow();
if (LINE_REFLOW_REDO == lineReflowStatus) {
didRedo = PR_TRUE;
}
#ifdef DEBUG
spins++;
if (1000 == spins) {
ListTag(stdout);
printf(": yikes! spinning on a line over 1000 times!\n");
NS_ABORT();
}
#endif
} while (NS_SUCCEEDED(rv) && LINE_REFLOW_REDO == lineReflowStatus);
// If we did at least one REDO, then the line did not fit next to some float.
// Mark it as impacted by a float, even if it no longer is next to a float.
if (didRedo) {
aLine->SetLineIsImpactedByFloat(PR_TRUE);
}
return rv;
}
// If at least one float on the line was complete, not at the top of
// page, but was truncated, then restore the overflow floats to what
// they were before and push the line. The floats that will be removed
// from the list aren't yet known by the block's next in flow.
void
nsBlockFrame::PushTruncatedPlaceholderLine(nsBlockReflowState& aState,
line_iterator aLine,
nsIFrame* aLastPlaceholder,
PRBool& aKeepReflowGoing)
{
UndoSplitPlaceholders(aState, aLastPlaceholder);
line_iterator prevLine = aLine;
--prevLine;
PushLines(aState, prevLine);
aKeepReflowGoing = PR_FALSE;
aState.mReflowStatus = NS_FRAME_NOT_COMPLETE;
}
nsresult
nsBlockFrame::DoReflowInlineFrames(nsBlockReflowState& aState,
nsLineLayout& aLineLayout,
line_iterator aLine,
PRBool* aKeepReflowGoing,
PRUint8* aLineReflowStatus,
PRBool aUpdateMaximumWidth,
PRBool aDamageDirtyArea,
PRBool aAllowPullUp)
{
// Forget all of the floats on the line
aLine->FreeFloats(aState.mFloatCacheFreeList);
aState.mFloatCombinedArea.SetRect(0, 0, 0, 0);
// Setup initial coordinate system for reflowing the inline frames
// into. Apply a previous block frame's bottom margin first.
if (ShouldApplyTopMargin(aState, aLine)) {
aState.mY += aState.mPrevBottomMargin.get();
}
aState.GetAvailableSpace();
PRBool impactedByFloats = aState.IsImpactedByFloat() ? PR_TRUE : PR_FALSE;
aLine->SetLineIsImpactedByFloat(impactedByFloats);
#ifdef REALLY_NOISY_REFLOW
printf("nsBlockFrame::DoReflowInlineFrames %p impacted = %d\n",
this, impactedByFloats);
#endif
const nsMargin& borderPadding = aState.BorderPadding();
nscoord x = aState.mAvailSpaceRect.x + borderPadding.left;
nscoord availWidth = aState.mAvailSpaceRect.width;
nscoord availHeight;
if (aState.GetFlag(BRS_UNCONSTRAINEDHEIGHT)) {
availHeight = NS_UNCONSTRAINEDSIZE;
}
else {
/* XXX get the height right! */
availHeight = aState.mAvailSpaceRect.height;
}
if (aUpdateMaximumWidth) {
availWidth = NS_UNCONSTRAINEDSIZE;
}
aLineLayout.BeginLineReflow(x, aState.mY,
availWidth, availHeight,
impactedByFloats,
PR_FALSE /*XXX isTopOfPage*/);
// XXX Unfortunately we need to know this before reflowing the first
// inline frame in the line. FIX ME.
if ((0 == aLineLayout.GetLineNumber()) &&
(NS_BLOCK_HAS_FIRST_LETTER_STYLE & mState)) {
aLineLayout.SetFirstLetterStyleOK(PR_TRUE);
}
// keep track of the last overflow float in case we need to undo any new additions
nsIFrame* lastPlaceholder = aState.mOverflowPlaceholders.LastChild();
// Reflow the frames that are already on the line first
nsresult rv = NS_OK;
PRUint8 lineReflowStatus = LINE_REFLOW_OK;
PRInt32 i;
nsIFrame* frame = aLine->mFirstChild;
aLine->SetHasPercentageChild(PR_FALSE); // To be set by ReflowInlineFrame below
// Determine whether this is a line of placeholders for out-of-flow
// continuations
PRBool isContinuingPlaceholders = PR_FALSE;
// need to repeatedly call GetChildCount here, because the child
// count can change during the loop!
for (i = 0; i < aLine->GetChildCount(); i++) {
if (IsContinuationPlaceholder(frame)) {
isContinuingPlaceholders = PR_TRUE;
}
rv = ReflowInlineFrame(aState, aLineLayout, aLine, frame,
&lineReflowStatus);
if (NS_FAILED(rv)) {
return rv;
}
if (LINE_REFLOW_OK != lineReflowStatus) {
// It is possible that one or more of next lines are empty
// (because of DeleteNextInFlowChild). If so, delete them now
// in case we are finished.
++aLine;
while ((aLine != end_lines()) && (0 == aLine->GetChildCount())) {
// XXX Is this still necessary now that DeleteNextInFlowChild
// uses DoRemoveFrame?
nsLineBox *toremove = aLine;
aLine = mLines.erase(aLine);
NS_ASSERTION(nsnull == toremove->mFirstChild, "bad empty line");
aState.FreeLineBox(toremove);
}
--aLine;
if (LINE_REFLOW_TRUNCATED == lineReflowStatus) {
// Don't push any lines if we just want to calculate the maximum width
if (!aUpdateMaximumWidth) {
// Push the line with the truncated float
PushTruncatedPlaceholderLine(aState, aLine, lastPlaceholder, *aKeepReflowGoing);
}
}
break;
}
frame = frame->GetNextSibling();
}
// Don't pull up new frames into lines with continuation placeholders
if (!isContinuingPlaceholders && aAllowPullUp) {
// Pull frames and reflow them until we can't
while (LINE_REFLOW_OK == lineReflowStatus) {
rv = PullFrame(aState, aLine, aDamageDirtyArea, frame);
if (NS_FAILED(rv)) {
return rv;
}
if (nsnull == frame) {
break;
}
while (LINE_REFLOW_OK == lineReflowStatus) {
PRInt32 oldCount = aLine->GetChildCount();
rv = ReflowInlineFrame(aState, aLineLayout, aLine, frame,
&lineReflowStatus);
if (NS_FAILED(rv)) {
return rv;
}
if (aLine->GetChildCount() != oldCount) {
// We just created a continuation for aFrame AND its going
// to end up on this line (e.g. :first-letter
// situation). Therefore we have to loop here before trying
// to pull another frame.
frame = frame->GetNextSibling();
}
else {
break;
}
}
}
}
if (LINE_REFLOW_REDO == lineReflowStatus) {
// This happens only when we have a line that is impacted by
// floats and the first element in the line doesn't fit with
// the floats.
//
// What we do is to advance past the first float we find and
// then reflow the line all over again.
NS_ASSERTION(aState.IsImpactedByFloat(),
"redo line on totally empty line");
NS_ASSERTION(NS_UNCONSTRAINEDSIZE != aState.mAvailSpaceRect.height,
"unconstrained height on totally empty line");
if (aState.mAvailSpaceRect.height > 0) {
aState.mY += aState.mAvailSpaceRect.height;
} else {
NS_ASSERTION(NS_UNCONSTRAINEDSIZE != aState.mReflowState.availableHeight,
"We shouldn't be running out of height here");
if (NS_UNCONSTRAINEDSIZE == aState.mReflowState.availableHeight) {
// just move it down a bit to try to get out of this mess
aState.mY += 1;
} else {
// There's nowhere to retry placing the line. Just treat it as if
// we placed the float but it was truncated so we need this line
// to go to the next page/column.
lineReflowStatus = LINE_REFLOW_TRUNCATED;
// Don't push any lines if we just want to calculate the maximum width
if (!aUpdateMaximumWidth) {
// Push the line that didn't fit
PushTruncatedPlaceholderLine(aState, aLine, lastPlaceholder, *aKeepReflowGoing);
}
}
}
// We don't want to advance by the bottom margin anymore (we did it
// once at the beginning of this function, which will just be called
// again), and we certainly don't want to go back if it's negative
// (infinite loop, bug 153429).
aState.mPrevBottomMargin.Zero();
// XXX: a small optimization can be done here when paginating:
// if the new Y coordinate is past the end of the block then
// push the line and return now instead of later on after we are
// past the float.
}
else if (LINE_REFLOW_TRUNCATED != lineReflowStatus) {
// If we are propagating out a break-before status then there is
// no point in placing the line.
if (!NS_INLINE_IS_BREAK_BEFORE(aState.mReflowStatus)) {
if (PlaceLine(aState, aLineLayout, aLine, aKeepReflowGoing, aUpdateMaximumWidth)) {
UndoSplitPlaceholders(aState, lastPlaceholder); // undo since we pushed the current line
}
}
}
*aLineReflowStatus = lineReflowStatus;
return rv;
}
/**
* Reflow an inline frame. The reflow status is mapped from the frames
* reflow status to the lines reflow status (not to our reflow status).
* The line reflow status is simple: PR_TRUE means keep placing frames
* on the line; PR_FALSE means don't (the line is done). If the line
* has some sort of breaking affect then aLine's break-type will be set
* to something other than NS_STYLE_CLEAR_NONE.
*/
nsresult
nsBlockFrame::ReflowInlineFrame(nsBlockReflowState& aState,
nsLineLayout& aLineLayout,
line_iterator aLine,
nsIFrame* aFrame,
PRUint8* aLineReflowStatus)
{
NS_ENSURE_ARG_POINTER(aFrame);
*aLineReflowStatus = LINE_REFLOW_OK;
// If it's currently ok to be reflowing in first-letter style then
// we must be about to reflow a frame that has first-letter style.
PRBool reflowingFirstLetter = aLineLayout.GetFirstLetterStyleOK();
#ifdef NOISY_FIRST_LETTER
ListTag(stdout);
printf(": reflowing ");
nsFrame::ListTag(stdout, aFrame);
printf(" reflowingFirstLetter=%s\n", reflowingFirstLetter ? "on" : "off");
#endif
// Remember if we have a percentage aware child on this line
if (IsPercentageAwareChild(aFrame)) {
aLine->SetHasPercentageChild(PR_TRUE);
}
// Reflow the inline frame
nsReflowStatus frameReflowStatus;
PRBool pushedFrame;
nsresult rv = aLineLayout.ReflowFrame(aFrame, frameReflowStatus,
nsnull, pushedFrame);
if (frameReflowStatus & NS_FRAME_REFLOW_NEXTINFLOW) {
// we need to ensure that the frame's nextinflow gets reflowed.
aState.mReflowStatus |= NS_FRAME_REFLOW_NEXTINFLOW;
nsBlockFrame* ourNext = NS_STATIC_CAST(nsBlockFrame*, GetNextInFlow());
if (ourNext && aFrame->GetNextInFlow()) {
line_iterator f = ourNext->FindLineFor(aFrame->GetNextInFlow());
if (f != ourNext->end_lines()) {
f->MarkDirty();
}
}
}
// If this is an incremental reflow, prune the child from the path
// so we don't incrementally reflow it again.
// XXX note that we don't currently have any incremental reflows
// that trace a path through an inline frame (thanks to reflow roots
// dealing with text inputs), but we may need to deal with this
// again, someday.
if (aState.mReflowState.path)
aState.mReflowState.path->RemoveChild(aFrame);
if (NS_FAILED(rv)) {
return rv;
}
#ifdef REALLY_NOISY_REFLOW_CHILD
nsFrame::ListTag(stdout, aFrame);
printf(": status=%x\n", frameReflowStatus);
#endif
#if defined(REFLOW_STATUS_COVERAGE)
RecordReflowStatus(PR_FALSE, frameReflowStatus);
#endif
// Send post-reflow notification
aState.mPrevChild = aFrame;
/* XXX
This is where we need to add logic to handle some odd behavior.
For one thing, we should usually place at least one thing next
to a left float, even when that float takes up all the width on a line.
see bug 22496
*/
// Process the child frames reflow status. There are 5 cases:
// complete, not-complete, break-before, break-after-complete,
// break-after-not-complete. There are two situations: we are a
// block or we are an inline. This makes a total of 10 cases
// (fortunately, there is some overlap).
aLine->SetBreakTypeAfter(NS_STYLE_CLEAR_NONE);
if (NS_INLINE_IS_BREAK(frameReflowStatus) ||
(NS_STYLE_CLEAR_NONE != aState.mFloatBreakType)) {
// Always abort the line reflow (because a line break is the
// minimal amount of break we do).
*aLineReflowStatus = LINE_REFLOW_STOP;
// XXX what should aLine's break-type be set to in all these cases?
PRUint8 breakType = NS_INLINE_GET_BREAK_TYPE(frameReflowStatus);
NS_ASSERTION((NS_STYLE_CLEAR_NONE != breakType) ||
(NS_STYLE_CLEAR_NONE != aState.mFloatBreakType), "bad break type");
NS_ASSERTION(NS_STYLE_CLEAR_PAGE != breakType, "no page breaks yet");
if (NS_INLINE_IS_BREAK_BEFORE(frameReflowStatus)) {
// Break-before cases.
if (aFrame == aLine->mFirstChild) {
// If we break before the first frame on the line then we must
// be trying to place content where theres no room (e.g. on a
// line with wide floats). Inform the caller to reflow the
// line after skipping past a float.
*aLineReflowStatus = LINE_REFLOW_REDO;
}
else {
// It's not the first child on this line so go ahead and split
// the line. We will see the frame again on the next-line.
rv = SplitLine(aState, aLineLayout, aLine, aFrame);
if (NS_FAILED(rv)) {
return rv;
}
// If we're splitting the line because the frame didn't fit and it
// was pushed, then mark the line as having word wrapped. We need to
// know that if we're shrink wrapping our width
if (pushedFrame) {
aLine->SetLineWrapped(PR_TRUE);
}
}
}
else {
// If a float split and its prev-in-flow was followed by a <BR>, then combine
// the <BR>'s break type with the inline's break type (the inline will be the very
// next frame after the split float).
if (NS_STYLE_CLEAR_NONE != aState.mFloatBreakType) {
breakType = nsLayoutUtils::CombineBreakType(breakType,
aState.mFloatBreakType);
aState.mFloatBreakType = NS_STYLE_CLEAR_NONE;
}
// Break-after cases
if (breakType == NS_STYLE_CLEAR_LINE) {
if (!aLineLayout.GetLineEndsInBR()) {
breakType = NS_STYLE_CLEAR_NONE;
}
}
aLine->SetBreakTypeAfter(breakType);
if (NS_FRAME_IS_NOT_COMPLETE(frameReflowStatus)) {
// Create a continuation for the incomplete frame. Note that the
// frame may already have a continuation.
PRBool madeContinuation;
rv = CreateContinuationFor(aState, aLine, aFrame, madeContinuation);
if (NS_FAILED(rv))
return rv;
if (!aLineLayout.GetLineEndsInBR()) {
// Remember that the line has wrapped
aLine->SetLineWrapped(PR_TRUE);
}
}
// Split line, but after the frame just reflowed
rv = SplitLine(aState, aLineLayout, aLine, aFrame->GetNextSibling());
if (NS_FAILED(rv)) {
return rv;
}
if (NS_FRAME_IS_NOT_COMPLETE(frameReflowStatus)) {
// Mark next line dirty in case SplitLine didn't end up
// pushing any frames.
nsLineList_iterator next = aLine.next();
if (next != end_lines() && !next->IsBlock()) {
next->MarkDirty();
}
}
}
}
else if (NS_FRAME_IS_NOT_COMPLETE(frameReflowStatus)) {
// Frame is not-complete, no special breaking status
nsIAtom* frameType = aFrame->GetType();
// Create a continuation for the incomplete frame. Note that the
// frame may already have a continuation.
PRBool madeContinuation;
rv = (nsLayoutAtoms::placeholderFrame == frameType)
? SplitPlaceholder(aState, aFrame)
: CreateContinuationFor(aState, aLine, aFrame, madeContinuation);
if (NS_FAILED(rv))
return rv;
// Remember that the line has wrapped
if (!aLineLayout.GetLineEndsInBR()) {
aLine->SetLineWrapped(PR_TRUE);
}
// If we are reflowing the first letter frame or a placeholder then
// don't split the line and don't stop the line reflow...
PRBool splitLine = !reflowingFirstLetter &&
nsLayoutAtoms::placeholderFrame != frameType;
if (reflowingFirstLetter) {
if ((nsLayoutAtoms::inlineFrame == frameType) ||
(nsLayoutAtoms::lineFrame == frameType)) {
splitLine = PR_TRUE;
}
}
if (splitLine) {
// Split line after the current frame
*aLineReflowStatus = LINE_REFLOW_STOP;
rv = SplitLine(aState, aLineLayout, aLine, aFrame->GetNextSibling());
if (NS_FAILED(rv)) {
return rv;
}
// Mark next line dirty in case SplitLine didn't end up
// pushing any frames.
nsLineList_iterator next = aLine.next();
if (next != end_lines() && !next->IsBlock()) {
next->MarkDirty();
}
}
}
else if (NS_FRAME_IS_TRUNCATED(frameReflowStatus)) {
// if the frame is a placeholder and was complete but truncated (and not at the top
// of page), the entire line will be pushed to give it another chance to not truncate.
if (nsLayoutAtoms::placeholderFrame == aFrame->GetType()) {
*aLineReflowStatus = LINE_REFLOW_TRUNCATED;
}
}
return NS_OK;
}
/**
* Create a continuation, if necessary, for aFrame. Place it in aLine
* if aLine is not null. Set aMadeNewFrame to PR_TRUE if a new frame is created.
*/
nsresult
nsBlockFrame::CreateContinuationFor(nsBlockReflowState& aState,
nsLineBox* aLine,
nsIFrame* aFrame,
PRBool& aMadeNewFrame)
{
aMadeNewFrame = PR_FALSE;
nsresult rv;
nsIFrame* nextInFlow;
rv = CreateNextInFlow(aState.mPresContext, this, aFrame, nextInFlow);
if (NS_FAILED(rv)) {
return rv;
}
if (nsnull != nextInFlow) {
aMadeNewFrame = PR_TRUE;
if (aLine) {
aLine->SetChildCount(aLine->GetChildCount() + 1);
}
}
#ifdef DEBUG
VerifyLines(PR_FALSE);
#endif
return rv;
}
nsresult
nsBlockFrame::SplitPlaceholder(nsBlockReflowState& aState,
nsIFrame* aPlaceholder)
{
nsIFrame* nextInFlow;
nsresult rv = CreateNextInFlow(aState.mPresContext, this, aPlaceholder, nextInFlow);
if (NS_FAILED(rv))
return rv;
if (!nextInFlow) {
// Next in flow was not created because it already exists.
return NS_OK;
}
// put the sibling list back to what it was before the continuation was created
nsIFrame *contFrame = aPlaceholder->GetNextSibling();
nsIFrame *next = contFrame->GetNextSibling();
aPlaceholder->SetNextSibling(next);
contFrame->SetNextSibling(nsnull);
NS_ASSERTION(IsContinuationPlaceholder(contFrame),
"Didn't create the right kind of frame");
// The new out of flow frame does not get put anywhere; the out-of-flows
// for placeholders in mOverflowPlaceholders are not kept in any child list
aState.mOverflowPlaceholders.AppendFrame(this, contFrame);
return NS_OK;
}
nsresult
nsBlockFrame::SplitLine(nsBlockReflowState& aState,
nsLineLayout& aLineLayout,
line_iterator aLine,
nsIFrame* aFrame)
{
NS_ABORT_IF_FALSE(aLine->IsInline(), "illegal SplitLine on block line");
PRInt32 pushCount = aLine->GetChildCount() - aLineLayout.GetCurrentSpanCount();
NS_ABORT_IF_FALSE(pushCount >= 0, "bad push count");
#ifdef DEBUG
if (gNoisyReflow) {
nsFrame::IndentBy(stdout, gNoiseIndent);
printf("split line: from line=%p pushCount=%d aFrame=",
NS_STATIC_CAST(void*, aLine.get()), pushCount);
if (aFrame) {
nsFrame::ListTag(stdout, aFrame);
}
else {
printf("(null)");
}
printf("\n");
if (gReallyNoisyReflow) {
aLine->List(aState.mPresContext, stdout, gNoiseIndent+1);
}
}
#endif
if (0 != pushCount) {
NS_ABORT_IF_FALSE(aLine->GetChildCount() > pushCount, "bad push");
NS_ABORT_IF_FALSE(nsnull != aFrame, "whoops");
NS_ASSERTION(nsFrameList(aFrame).GetLength() >= pushCount,
"Not enough frames to push");
// Put frames being split out into their own line
nsLineBox* newLine = aState.NewLineBox(aFrame, pushCount, PR_FALSE);
if (!newLine) {
return NS_ERROR_OUT_OF_MEMORY;
}
mLines.after_insert(aLine, newLine);
aLine->SetChildCount(aLine->GetChildCount() - pushCount);
#ifdef DEBUG
if (gReallyNoisyReflow) {
newLine->List(aState.mPresContext, stdout, gNoiseIndent+1);
}
#endif
// Let line layout know that some frames are no longer part of its
// state.
aLineLayout.SplitLineTo(aLine->GetChildCount());
#ifdef DEBUG
VerifyLines(PR_TRUE);
#endif
}
return NS_OK;
}
PRBool
nsBlockFrame::ShouldJustifyLine(nsBlockReflowState& aState,
line_iterator aLine)
{
while (++aLine != end_lines()) {
// There is another line
if (0 != aLine->GetChildCount()) {
// If the next line is a block line then we must not justify
// this line because it means that this line is the last in a
// group of inline lines.
return !aLine->IsBlock();
}
// The next line is empty, try the next one
}
// XXX Not sure about this part
// Try our next-in-flows lines to answer the question
nsBlockFrame* nextInFlow = (nsBlockFrame*) mNextInFlow;
while (nsnull != nextInFlow) {
for (line_iterator line = nextInFlow->begin_lines(),
line_end = nextInFlow->end_lines();
line != line_end;
++line)
{
if (0 != line->GetChildCount())
return !line->IsBlock();
}
nextInFlow = (nsBlockFrame*) nextInFlow->mNextInFlow;
}
// This is the last line - so don't allow justification
return PR_FALSE;
}
PRBool
nsBlockFrame::PlaceLine(nsBlockReflowState& aState,
nsLineLayout& aLineLayout,
line_iterator aLine,
PRBool* aKeepReflowGoing,
PRBool aUpdateMaximumWidth)
{
// Trim extra white-space from the line before placing the frames
aLineLayout.TrimTrailingWhiteSpace();
// Vertically align the frames on this line.
//
// According to the CSS2 spec, section 12.6.1, the "marker" box
// participates in the height calculation of the list-item box's
// first line box.
//
// There are exactly two places a bullet can be placed: near the
// first or second line. Its only placed on the second line in a
// rare case: an empty first line followed by a second line that
// contains a block (example: <LI>\n<P>... ).
//
// For this code, only the first case is possible because this
// method is used for placing a line of inline frames. If the rare
// case is happening then the worst that will happen is that the
// bullet frame will be reflowed twice.
PRBool addedBullet = PR_FALSE;
if (mBullet && HaveOutsideBullet() && (aLine == mLines.front()) &&
(!aLineLayout.IsZeroHeight() || (aLine == mLines.back()))) {
nsHTMLReflowMetrics metrics(nsnull);
ReflowBullet(aState, metrics);
aLineLayout.AddBulletFrame(mBullet, metrics);
addedBullet = PR_TRUE;
}
nscoord maxElementWidth;
aLineLayout.VerticalAlignLine(aLine, &maxElementWidth);
// Our ascent is the ascent of our first line (but if this line is all
// whitespace we'll correct things in |ReflowBlockFrame|).
if (aLine == mLines.front()) {
mAscent = aLine->mBounds.y + aLine->GetAscent();
}
// See if we're shrink wrapping the width
if (aState.GetFlag(BRS_SHRINKWRAPWIDTH)) {
// XXXldb Do we really still want to do this?
// When determining the line's width we also need to include any
// right floats that impact us. This represents the shrink wrap
// width of the line
if (aState.IsImpactedByFloat() && !aLine->IsLineWrapped()) {
NS_ASSERTION(aState.mContentArea.width >= aState.mAvailSpaceRect.XMost(), "bad state");
aLine->mBounds.width += aState.mContentArea.width - aState.mAvailSpaceRect.XMost();
}
}
#ifdef DEBUG
{
static nscoord lastHeight = 0;
if (CRAZY_HEIGHT(aLine->mBounds.y)) {
lastHeight = aLine->mBounds.y;
if (abs(aLine->mBounds.y - lastHeight) > CRAZY_H/10) {
nsFrame::ListTag(stdout);
printf(": line=%p y=%d line.bounds.height=%d\n",
NS_STATIC_CAST(void*, aLine.get()),
aLine->mBounds.y, aLine->mBounds.height);
}
}
else {
lastHeight = 0;
}
}
#endif
// Only block frames horizontally align their children because
// inline frames "shrink-wrap" around their children (therefore
// there is no extra horizontal space).
const nsStyleText* styleText = GetStyleText();
PRBool allowJustify = NS_STYLE_TEXT_ALIGN_JUSTIFY == styleText->mTextAlign &&
!aLineLayout.GetLineEndsInBR() &&
ShouldJustifyLine(aState, aLine);
PRBool successful = aLineLayout.HorizontalAlignFrames(aLine->mBounds,
allowJustify, aState.GetFlag(BRS_SHRINKWRAPWIDTH));
// XXX: not only bidi: right alignment can be broken after
// RelativePositionFrames!!!
// XXXldb Is something here considering relatively positioned frames at
// other than their original positions?
if (!successful) {
// Mark the line dirty and then later once we've determined the width
// we can do the horizontal alignment
aLine->MarkDirty();
aState.SetFlag(BRS_NEEDRESIZEREFLOW, PR_TRUE);
}
#ifdef IBMBIDI
// XXXldb Why don't we do this earlier?
else {
if (aState.mPresContext->BidiEnabled()) {
if (!aState.mPresContext->IsVisualMode()) {
nsBidiPresUtils* bidiUtils = aState.mPresContext->GetBidiUtils();
if (bidiUtils && bidiUtils->IsSuccessful() ) {
nsIFrame* nextInFlow = (aLine.next() != end_lines())
? aLine.next()->mFirstChild : nsnull;
bidiUtils->ReorderFrames(aState.mPresContext,
aState.mReflowState.rendContext,
aLine->mFirstChild, nextInFlow,
aLine->GetChildCount() );
} // bidiUtils
} // not visual mode
} // bidi enabled
} // successful
#endif // IBMBIDI
nsRect combinedArea;
aLineLayout.RelativePositionFrames(combinedArea); // XXXldb This returned width as -15, 2001-06-12, Bugzilla
aLine->SetCombinedArea(combinedArea);
if (addedBullet) {
aLineLayout.RemoveBulletFrame(mBullet);
}
// Inline lines do not have margins themselves; however they are
// impacted by prior block margins. If this line ends up having some
// height then we zero out the previous bottom margin value that was
// already applied to the line's starting Y coordinate. Otherwise we
// leave it be so that the previous blocks bottom margin can be
// collapsed with a block that follows.
nscoord newY;
if (!aLine->CachedIsEmpty()) {
// This line has some height. Therefore the application of the
// previous-bottom-margin should stick.
aState.mPrevBottomMargin.Zero();
newY = aLine->mBounds.YMost();
}
else {
// Don't let the previous-bottom-margin value affect the newY
// coordinate (it was applied in ReflowInlineFrames speculatively)
// since the line is empty.
// We already called |ShouldApplyTopMargin|, and if we applied it
// then BRS_APPLYTOPMARGIN is set.
nscoord dy = aState.GetFlag(BRS_APPLYTOPMARGIN)
? -aState.mPrevBottomMargin.get() : 0;
newY = aState.mY + dy;
aLine->SlideBy(dy); // XXXldb Do we really want to do this?
// keep our ascent in sync
// XXXldb If it's empty, shouldn't the next line control the ascent?
if (mLines.front() == aLine) {
mAscent += dy;
}
}
// See if the line fit. If it doesn't we need to push it. Our first
// line will always fit.
// If we're just updating the maximum width then we don't care if it
// fits; we'll assume it does, so that the maximum width will get
// updated below. The line will be reflowed again and pushed then
// if necessary.
if (mLines.front() != aLine &&
newY > aState.mBottomEdge &&
aState.mBottomEdge != NS_UNCONSTRAINEDSIZE &&
!aUpdateMaximumWidth) {
// Push this line and all of it's children and anything else that
// follows to our next-in-flow
NS_ASSERTION((aState.mCurrentLine == aLine), "oops");
PushLines(aState, aLine.prev());
// Stop reflow and whack the reflow status if reflow hasn't
// already been stopped.
if (*aKeepReflowGoing) {
aState.mReflowStatus |= NS_FRAME_NOT_COMPLETE;
*aKeepReflowGoing = PR_FALSE;
}
return PR_TRUE;
}
// May be needed below
PRBool wasAdjacentWIthTop = aState.IsAdjacentWithTop();
aState.mY = newY;
// If we're reflowing the line just to incrementally update the
// maximum width, then don't post-place the line. It's doing work we
// don't need, and it will update things like aState.mKidXMost that
// we don't want updated...
if (aUpdateMaximumWidth) {
// However, we do need to update the max-element-width if requested
if (aState.GetFlag(BRS_COMPUTEMAXELEMENTWIDTH)) {
aState.UpdateMaxElementWidth(maxElementWidth);
// We also cache the max element width in the line. This is needed for
// incremental reflow
aLine->mMaxElementWidth = maxElementWidth;
#ifdef DEBUG
if (gNoisyMaxElementWidth) {
IndentBy(stdout, gNoiseIndent);
printf ("nsBlockFrame::PlaceLine: %p setting MEW for line %p to %d\n",
NS_STATIC_CAST(void*, this), NS_STATIC_CAST(void*, aLine.get()),
maxElementWidth);
}
#endif
}
} else {
PostPlaceLine(aState, aLine, maxElementWidth);
}
// Add the already placed current-line floats to the line
aLine->AppendFloats(aState.mCurrentLineFloats);
// Any below current line floats to place?
if (aState.mBelowCurrentLineFloats.NotEmpty()) {
// Reflow the below-current-line floats, then add them to the
// lines float list if there aren't any truncated floats.
if (aState.PlaceBelowCurrentLineFloats(aState.mBelowCurrentLineFloats,
wasAdjacentWIthTop)) {
aLine->AppendFloats(aState.mBelowCurrentLineFloats);
}
else {
// At least one float is truncated, so fix up any placeholders that got split and
// push the line. XXX It may be better to put the float on the next line, but this
// is not common enough to justify the complexity. Or maybe it is now...
// If we just want to calculate the maximum width, then don't push the line.
// We'll reflow it again and then it will get pushed if necessary.
if (!aUpdateMaximumWidth) {
nsIFrame* lastPlaceholder = aState.mOverflowPlaceholders.LastChild();
PushTruncatedPlaceholderLine(aState, aLine, lastPlaceholder, *aKeepReflowGoing);
}
}
}
// When a line has floats, factor them into the combined-area
// computations.
if (aLine->HasFloats()) {
// Combine the float combined area (stored in aState) and the
// value computed by the line layout code.
nsRect lineCombinedArea(aLine->GetCombinedArea());
#ifdef NOISY_COMBINED_AREA
ListTag(stdout);
printf(": lineCA=%d,%d,%d,%d floatCA=%d,%d,%d,%d\n",
lineCombinedArea.x, lineCombinedArea.y,
lineCombinedArea.width, lineCombinedArea.height,
aState.mFloatCombinedArea.x, aState.mFloatCombinedArea.y,
aState.mFloatCombinedArea.width,
aState.mFloatCombinedArea.height);
#endif
lineCombinedArea.UnionRect(aState.mFloatCombinedArea, lineCombinedArea);
aLine->SetCombinedArea(lineCombinedArea);
#ifdef NOISY_COMBINED_AREA
printf(" ==> final lineCA=%d,%d,%d,%d\n",
lineCombinedArea.x, lineCombinedArea.y,
lineCombinedArea.width, lineCombinedArea.height);
#endif
}
// Apply break-after clearing if necessary
// This must stay in sync with |ReflowDirtyLines|.
if (aLine->HasFloatBreakAfter()) {
aState.mY = aState.ClearFloats(aState.mY, aLine->GetBreakTypeAfter());
}
return PR_FALSE;
}
void
nsBlockFrame::PostPlaceLine(nsBlockReflowState& aState,
nsLineBox* aLine,
nscoord aMaxElementWidth)
{
// Update max-element-width
if (aState.GetFlag(BRS_COMPUTEMAXELEMENTWIDTH)) {
aState.UpdateMaxElementWidth(aMaxElementWidth);
// We also cache the max element width in the line. This is needed for
// incremental reflow
aLine->mMaxElementWidth = aMaxElementWidth;
#ifdef DEBUG
if (gNoisyMaxElementWidth) {
IndentBy(stdout, gNoiseIndent);
printf ("nsBlockFrame::PostPlaceLine: %p setting line %p MEW %d\n",
NS_STATIC_CAST(void*, this), NS_STATIC_CAST(void*, aLine),
aMaxElementWidth);
}
#endif
}
// If this is an unconstrained reflow, then cache the line width in the
// line. We'll need this during incremental reflow if we're asked to
// calculate the maximum width
if (aState.GetFlag(BRS_UNCONSTRAINEDWIDTH)) {
#ifdef NOISY_MAXIMUM_WIDTH
printf("nsBlockFrame::PostPlaceLine during UC Reflow of block %p line %p caching max width %d\n",
NS_STATIC_CAST(void*, this), NS_STATIC_CAST(void*, aLine),
aLine->mBounds.XMost());
#endif
aLine->mMaximumWidth = aLine->mBounds.XMost();
}
// Update xmost
nscoord xmost = aLine->mBounds.XMost();
#ifdef DEBUG
if (CRAZY_WIDTH(xmost)) {
ListTag(stdout);
printf(": line=%p xmost=%d\n", NS_STATIC_CAST(void*, aLine), xmost);
}
#endif
if (xmost > aState.mKidXMost) {
aState.mKidXMost = xmost;
#ifdef NOISY_KIDXMOST
printf("%p PostPlaceLine aState.mKidXMost=%d\n", this, aState.mKidXMost);
#endif
}
}
void
nsBlockFrame::PushLines(nsBlockReflowState& aState,
nsLineList::iterator aLineBefore)
{
nsLineList::iterator overBegin(aLineBefore.next());
// PushTruncatedPlaceholderLine sometimes pushes the first line. Ugh.
PRBool firstLine = overBegin == begin_lines();
if (overBegin != end_lines()) {
// Remove floats in the lines from mFloats
nsFrameList floats;
nsIFrame* tail = nsnull;
CollectFloats(overBegin->mFirstChild, floats, &tail, PR_FALSE, PR_TRUE);
if (floats.NotEmpty()) {
// Push the floats onto the front of the overflow out-of-flows list
nsFrameList oofs = GetOverflowOutOfFlows();
if (oofs.NotEmpty()) {
floats.InsertFrames(nsnull, tail, oofs.FirstChild());
}
SetOverflowOutOfFlows(floats);
}
// overflow lines can already exist in some cases, in particular,
// when shrinkwrapping and we discover that the shrinkwap causes
// the height of some child block to grow which creates additional
// overflowing content. In such cases we must prepend the new
// overflow to the existing overflow.
nsLineList* overflowLines = RemoveOverflowLines();
if (!overflowLines) {
// XXXldb use presshell arena!
overflowLines = new nsLineList();
}
if (overflowLines) {
if (!overflowLines->empty()) {
mLines.back()->LastChild()->SetNextSibling(overflowLines->front()->mFirstChild);
}
overflowLines->splice(overflowLines->begin(), mLines, overBegin,
end_lines());
NS_ASSERTION(!overflowLines->empty(), "should not be empty");
// this takes ownership but it won't delete it immediately so we
// can keep using it.
SetOverflowLines(overflowLines);
// Mark all the overflow lines dirty so that they get reflowed when
// they are pulled up by our next-in-flow.
// XXXldb Can this get called O(N) times making the whole thing O(N^2)?
for (line_iterator line = overflowLines->begin(),
line_end = overflowLines->end();
line != line_end;
++line)
{
line->MarkDirty();
line->MarkPreviousMarginDirty();
line->mBounds.SetRect(0, 0, 0, 0);
if (line->HasFloats()) {
line->FreeFloats(aState.mFloatCacheFreeList);
}
}
}
}
// Break frame sibling list
if (!firstLine)
aLineBefore->LastChild()->SetNextSibling(nsnull);
#ifdef DEBUG
VerifyOverflowSituation();
#endif
}
/**
* Call this when a frame will be pulled from the block's
* next-in-flow into this frame. If it's a continuation placeholder,
* it should not be here so we push it into our overflow placeholders
* list. To avoid creating holes (e.g., the following block doesn't
* have a placeholder but the block after it does) we also need to
* pull all the following placeholders and put them in our overflow
* placeholders list too.
*
* If it's a first-in-flow placeholder, or it contains one, then we
* need to do this to the continuation placeholders.
*
* We return PR_TRUE if we removed the frame and it cannot be used.
* If we return PR_FALSE then the frame *must* be pulled immediately.
*/
PRBool
nsBlockFrame::HandleOverflowPlaceholdersForPulledFrame(
nsBlockReflowState& aState, nsIFrame* aFrame)
{
if (nsLayoutAtoms::placeholderFrame != aFrame->GetType()) {
// Descend into children that are not float containing blocks.
// We should encounter only first-in-flow placeholders, so the
// frame subtree rooted at aFrame should not change.
if (!aFrame->IsFloatContainingBlock()) {
for (nsIFrame* f = aFrame->GetFirstChild(nsnull); f; f = f->GetNextSibling()) {
#ifdef DEBUG
PRBool changed =
#endif
HandleOverflowPlaceholdersForPulledFrame(aState, f);
NS_ASSERTION(!changed, "Shouldn't find any continuation placeholders inside inlines");
}
}
return PR_FALSE;
}
PRBool taken = PR_TRUE;
nsIFrame* frame = aFrame;
if (!aFrame->GetPrevInFlow()) {
// First in flow frame. We only want to deal with its
// next in flows, if there are any.
taken = PR_FALSE;
frame = frame->GetNextInFlow();
if (!frame)
return PR_FALSE;
}
nsBlockFrame* parent = NS_STATIC_CAST(nsBlockFrame*, frame->GetParent());
// Remove aFrame and all its next in flows from their parents, but
// don't destroy the frames.
#ifdef DEBUG
nsresult rv =
#endif
parent->DoRemoveFrame(frame, PR_FALSE);
NS_ASSERTION(NS_SUCCEEDED(rv), "frame should be in parent's lists");
nsIFrame* lastOverflowPlace = aState.mOverflowPlaceholders.LastChild();
while (frame) {
NS_ASSERTION(IsContinuationPlaceholder(frame),
"Should only be dealing with continuation placeholders here");
parent = NS_STATIC_CAST(nsBlockFrame*, frame->GetParent());
ReparentFrame(frame, parent, this);
// continuation placeholders are always direct children of a block
nsIFrame* outOfFlow = nsPlaceholderFrame::GetRealFrameForPlaceholder(frame);
if (!parent->mFloats.RemoveFrame(outOfFlow)) {
nsAutoOOFFrameList oofs(parent);
#ifdef DEBUG
PRBool found =
#endif
oofs.mList.RemoveFrame(outOfFlow);
NS_ASSERTION(found, "Must have the out of flow in some child list");
}
ReparentFrame(outOfFlow, parent, this);
aState.mOverflowPlaceholders.InsertFrames(nsnull, lastOverflowPlace, frame);
// outOfFlow isn't inserted anywhere yet. Eventually the overflow
// placeholders get put into the overflow lines, and at the same time we
// insert the placeholders' out of flows into the overflow out-of-flows
// list.
lastOverflowPlace = frame;
frame = frame->GetNextInFlow();
}
return taken;
}
/**
* Call this when a line will be pulled from the block's
* next-in-flow's line.
*
* @return PR_TRUE we consumed the entire line, delete it and try again
*/
PRBool
nsBlockFrame::HandleOverflowPlaceholdersOnPulledLine(
nsBlockReflowState& aState, nsLineBox* aLine)
{
// First, see if it's a line of continuation placeholders. If it
// is, remove one and retry.
if (aLine->mFirstChild && IsContinuationPlaceholder(aLine->mFirstChild)) {
PRBool taken =
HandleOverflowPlaceholdersForPulledFrame(aState, aLine->mFirstChild);
NS_ASSERTION(taken, "We must have removed that frame");
return PR_TRUE;
}
// OK, it's a normal line. Scan it for floats with continuations that
// need to be taken care of. We won't need to change the line.
PRInt32 n = aLine->GetChildCount();
for (nsIFrame* f = aLine->mFirstChild; n > 0; f = f->GetNextSibling(), --n) {
#ifdef DEBUG
PRBool taken =
#endif
HandleOverflowPlaceholdersForPulledFrame(aState, f);
NS_ASSERTION(!taken, "Shouldn't be any continuation placeholders on this line");
}
return PR_FALSE;
}
// The overflowLines property is stored as a pointer to a line list,
// which must be deleted. However, the following functions all maintain
// the invariant that the property is never set if the list is empty.
PRBool
nsBlockFrame::DrainOverflowLines(nsBlockReflowState& aState)
{
#ifdef DEBUG
VerifyOverflowSituation();
#endif
nsLineList* overflowLines = nsnull;
nsLineList* ourOverflowLines = nsnull;
// First grab the prev-in-flows overflow lines
nsBlockFrame* prevBlock = (nsBlockFrame*) mPrevInFlow;
if (prevBlock) {
overflowLines = prevBlock->RemoveOverflowLines();
if (overflowLines) {
NS_ASSERTION(! overflowLines->empty(),
"overflow lines should never be set and empty");
// Make all the frames on the overflow line list mine
nsIFrame* frame = overflowLines->front()->mFirstChild;
while (nsnull != frame) {
ReparentFrame(frame, prevBlock, this);
// Get the next frame
frame = frame->GetNextSibling();
}
// make the overflow out-of-flow frames mine too
nsAutoOOFFrameList oofs(prevBlock);
if (oofs.mList.NotEmpty()) {
for (nsIFrame* f = oofs.mList.FirstChild(); f; f = f->GetNextSibling()) {
ReparentFrame(f, prevBlock, this);
}
mFloats.InsertFrames(nsnull, nsnull, oofs.mList.FirstChild());
oofs.mList.SetFrames(nsnull);
}
}
// The lines on the overflow list have already been marked dirty and their
// previous margins marked dirty also.
}
// Don't need to reparent frames in our own overflow lines/oofs, because they're
// already ours. But we should put overflow floats back in mFloats.
ourOverflowLines = RemoveOverflowLines();
if (ourOverflowLines) {
nsAutoOOFFrameList oofs(this);
if (oofs.mList.NotEmpty()) {
// The overflow floats go after our regular floats
mFloats.AppendFrames(nsnull, oofs.mList.FirstChild());
oofs.mList.SetFrames(nsnull);
}
}
if (!overflowLines && !ourOverflowLines) {
// nothing to do; always the case for non-constrained-height reflows
return PR_FALSE;
}
NS_ASSERTION(aState.mOverflowPlaceholders.IsEmpty(),
"Should have no overflow placeholders yet");
// HANDLING CONTINUATION PLACEHOLDERS (floats only at the moment, because
// abs-pos frames don't have continuations)
//
// All continuation placeholders need to be moved to the front of
// our line list. We also need to maintain the invariant that at
// most one frame for a given piece of content is in our normal
// child list, by pushing all but the first placeholder to our
// overflow placeholders list.
//
// One problem we have to deal with is that some of these
// continuation placeholders may have been donated to us by a
// descendant block that was complete. We need to push them down to
// a lower block if possible.
//
// We keep the lists ordered so that prev in flows come before their
// next in flows. We do not worry about properly ordering the
// placeholders for different content relative to each other until
// the end. Then we sort them.
//
// When we're shuffling placeholders we also need to shuffle their out of
// flows to match. As we put placeholders into keepPlaceholders, we unhook
// their floats from mFloats. Later we put the floats back based on the
// order of the placeholders.
nsIFrame* lastOP = nsnull;
nsFrameList keepPlaceholders;
nsFrameList keepOutOfFlows;
nsIFrame* lastKP = nsnull;
nsIFrame* lastKOOF = nsnull;
nsLineList* lineLists[3] = { overflowLines, &mLines, ourOverflowLines };
static const PRPackedBool searchFirstLinesOnly[3] = { PR_FALSE, PR_TRUE, PR_FALSE };
for (PRInt32 i = 0; i < 3; ++i) {
nsLineList* ll = lineLists[i];
if (ll && !ll->empty()) {
line_iterator iter = ll->begin();
line_iterator iter_end = ll->end();
nsIFrame* lastFrame = nsnull;
while (iter != iter_end) {
PRUint32 n = iter->GetChildCount();
if (n == 0 || !IsContinuationPlaceholder(iter->mFirstChild)) {
if (lastFrame) {
lastFrame->SetNextSibling(iter->mFirstChild);
}
if (searchFirstLinesOnly[i]) {
break;
}
lastFrame = iter->LastChild();
++iter;
} else {
nsLineBox* line = iter;
iter = ll->erase(iter);
nsIFrame* next;
for (nsPlaceholderFrame* f = NS_STATIC_CAST(nsPlaceholderFrame*, line->mFirstChild);
n > 0; --n, f = NS_STATIC_CAST(nsPlaceholderFrame*, next)) {
NS_ASSERTION(IsContinuationPlaceholder(f),
"Line frames should all be continuation placeholders");
next = f->GetNextSibling();
nsIFrame* fpif = f->GetPrevInFlow();
nsIFrame* oof = f->GetOutOfFlowFrame();
// Take this out of mFloats for now. We may put it back later in
// this function
#ifdef DEBUG
PRBool found =
#endif
mFloats.RemoveFrame(oof);
NS_ASSERTION(found, "Float should have been put in our mFloats list");
PRBool isAncestor = nsLayoutUtils::IsProperAncestorFrame(this, fpif);
if (isAncestor) {
// oops. we already have a prev-in-flow for this
// placeholder. We have to move this frame out of here. We
// can put it in our overflow placeholders.
aState.mOverflowPlaceholders.InsertFrame(nsnull, lastOP, f);
// Let oof dangle for now, because placeholders in
// mOverflowPlaceholders do not keep their floats in any child list
lastOP = f;
} else {
if (fpif->GetParent() == prevBlock) {
keepPlaceholders.InsertFrame(nsnull, lastKP, f);
keepOutOfFlows.InsertFrame(nsnull, lastKOOF, oof);
lastKP = f;
lastKOOF = oof;
} else {
// Ok, now we're in the tough situation where some child
// of prevBlock was complete and pushed its overflow
// placeholders up to prevBlock's overflow. We might be
// able to find a more appropriate parent for f somewhere
// down in our descendants.
NS_ASSERTION(nsLayoutUtils::IsProperAncestorFrame(prevBlock, fpif),
"bad prev-in-flow ancestor chain");
// Find the first ancestor of f's prev-in-flow that has a next in flow
// that can contain the float.
// That next in flow should become f's parent.
nsIFrame* fpAncestor;
for (fpAncestor = fpif->GetParent();
!fpAncestor->GetNextInFlow() || !fpAncestor->IsFloatContainingBlock();
fpAncestor = fpAncestor->GetParent())
;
if (fpAncestor == prevBlock) {
// We're still the best parent.
keepPlaceholders.InsertFrame(nsnull, lastKP, f);
keepOutOfFlows.InsertFrame(nsnull, lastKOOF, oof);
lastKP = f;
lastKOOF = oof;
} else {
// Just put it at the front of
// fpAncestor->GetNextInFlow()'s lines.
nsLineBox* newLine = aState.NewLineBox(f, 1, PR_FALSE);
if (newLine) {
nsBlockFrame* target =
NS_STATIC_CAST(nsBlockFrame*, fpAncestor->GetNextInFlow());
if (!target->mLines.empty()) {
f->SetNextSibling(target->mLines.front()->mFirstChild);
} else {
f->SetNextSibling(nsnull);
}
target->mLines.push_front(newLine);
ReparentFrame(f, this, target);
target->mFloats.InsertFrame(nsnull, nsnull, oof);
ReparentFrame(oof, this, target);
}
}
}
}
}
aState.FreeLineBox(line);
}
}
if (lastFrame) {
lastFrame->SetNextSibling(nsnull);
}
}
}
// Now join the line lists into mLines
if (overflowLines) {
if (!overflowLines->empty()) {
// Join the line lists
if (! mLines.empty())
{
// Remember to recompute the margins on the first line. This will
// also recompute the correct deltaY if necessary.
mLines.front()->MarkPreviousMarginDirty();
// Join the sibling lists together
nsIFrame* lastFrame = overflowLines->back()->LastChild();
lastFrame->SetNextSibling(mLines.front()->mFirstChild);
}
// Place overflow lines at the front of our line list
mLines.splice(mLines.begin(), *overflowLines);
NS_ASSERTION(overflowLines->empty(), "splice should empty list");
}
delete overflowLines;
}
if (ourOverflowLines) {
if (!ourOverflowLines->empty()) {
if (!mLines.empty()) {
mLines.back()->LastChild()->
SetNextSibling(ourOverflowLines->front()->mFirstChild);
}
// append the overflow to mLines
mLines.splice(mLines.end(), *ourOverflowLines);
}
delete ourOverflowLines;
}
// store the placeholders that we're keeping in our frame list
if (keepPlaceholders.NotEmpty()) {
keepPlaceholders.SortByContentOrder();
nsLineBox* newLine = aState.NewLineBox(keepPlaceholders.FirstChild(),
keepPlaceholders.GetLength(), PR_FALSE);
if (newLine) {
if (!mLines.empty()) {
keepPlaceholders.LastChild()->SetNextSibling(mLines.front()->mFirstChild);
}
mLines.push_front(newLine);
}
// Put the placeholders' out of flows into the float list
keepOutOfFlows.SortByContentOrder();
mFloats.InsertFrames(nsnull, nsnull, keepOutOfFlows.FirstChild());
}
return PR_TRUE;
}
nsLineList*
nsBlockFrame::GetOverflowLines() const
{
if (!(GetStateBits() & NS_BLOCK_HAS_OVERFLOW_LINES)) {
return nsnull;
}
nsLineList* lines = NS_STATIC_CAST(nsLineList*,
GetProperty(nsLayoutAtoms::overflowLinesProperty));
NS_ASSERTION(lines && !lines->empty(),
"value should always be stored and non-empty when state set");
return lines;
}
nsLineList*
nsBlockFrame::RemoveOverflowLines()
{
if (!(GetStateBits() & NS_BLOCK_HAS_OVERFLOW_LINES)) {
return nsnull;
}
nsLineList* lines = NS_STATIC_CAST(nsLineList*,
UnsetProperty(nsLayoutAtoms::overflowLinesProperty));
NS_ASSERTION(lines && !lines->empty(),
"value should always be stored and non-empty when state set");
RemoveStateBits(NS_BLOCK_HAS_OVERFLOW_LINES);
return lines;
}
// Destructor function for the overflowLines frame property
static void
DestroyOverflowLines(void* aFrame,
nsIAtom* aPropertyName,
void* aPropertyValue,
void* aDtorData)
{
if (aPropertyValue) {
nsLineList* lines = NS_STATIC_CAST(nsLineList*, aPropertyValue);
nsPresContext *context = NS_STATIC_CAST(nsPresContext*, aDtorData);
nsLineBox::DeleteLineList(context, *lines);
delete lines;
}
}
// This takes ownership of aOverflowLines.
// XXX We should allocate overflowLines from presShell arena!
nsresult
nsBlockFrame::SetOverflowLines(nsLineList* aOverflowLines)
{
NS_ASSERTION(aOverflowLines, "null lines");
NS_ASSERTION(!aOverflowLines->empty(), "empty lines");
NS_ASSERTION(!(GetStateBits() & NS_BLOCK_HAS_OVERFLOW_LINES),
"Overwriting existing overflow lines");
nsPresContext *presContext = GetPresContext();
nsresult rv = presContext->PropertyTable()->
SetProperty(this, nsLayoutAtoms::overflowLinesProperty, aOverflowLines,
DestroyOverflowLines, presContext);
// Verify that we didn't overwrite an existing overflow list
NS_ASSERTION(rv != NS_PROPTABLE_PROP_OVERWRITTEN, "existing overflow list");
AddStateBits(NS_BLOCK_HAS_OVERFLOW_LINES);
return rv;
}
nsFrameList
nsBlockFrame::GetOverflowOutOfFlows() const
{
if (!(GetStateBits() & NS_BLOCK_HAS_OVERFLOW_OUT_OF_FLOWS)) {
return nsFrameList();
}
nsIFrame* result = NS_STATIC_CAST(nsIFrame*,
GetProperty(nsLayoutAtoms::overflowOutOfFlowsProperty));
NS_ASSERTION(result, "value should always be non-empty when state set");
return nsFrameList(result);
}
// This takes ownership of the frames
void
nsBlockFrame::SetOverflowOutOfFlows(const nsFrameList& aList)
{
if (aList.IsEmpty()) {
if (!(GetStateBits() & NS_BLOCK_HAS_OVERFLOW_OUT_OF_FLOWS)) {
return;
}
nsIFrame* result = NS_STATIC_CAST(nsIFrame*,
UnsetProperty(nsLayoutAtoms::overflowOutOfFlowsProperty));
NS_ASSERTION(result, "value should always be non-empty when state set");
RemoveStateBits(NS_BLOCK_HAS_OVERFLOW_OUT_OF_FLOWS);
} else {
SetProperty(nsLayoutAtoms::overflowOutOfFlowsProperty,
aList.FirstChild(), nsnull);
AddStateBits(NS_BLOCK_HAS_OVERFLOW_OUT_OF_FLOWS);
}
}
nsFrameList*
nsBlockFrame::GetOverflowPlaceholders() const
{
if (!(GetStateBits() & NS_BLOCK_HAS_OVERFLOW_PLACEHOLDERS)) {
return nsnull;
}
nsFrameList* result = NS_STATIC_CAST(nsFrameList*,
GetProperty(nsLayoutAtoms::overflowPlaceholdersProperty));
NS_ASSERTION(result, "value should always be non-empty when state set");
return result;
}
//////////////////////////////////////////////////////////////////////
// Frame list manipulation routines
nsIFrame*
nsBlockFrame::LastChild()
{
if (! mLines.empty()) {
return mLines.back()->LastChild();
}
return nsnull;
}
NS_IMETHODIMP
nsBlockFrame::AppendFrames(nsIAtom* aListName,
nsIFrame* aFrameList)
{
if (nsnull == aFrameList) {
return NS_OK;
}
if (mAbsoluteContainer.GetChildListName() == aListName) {
return mAbsoluteContainer.AppendFrames(this, aListName, aFrameList);
}
else if (nsLayoutAtoms::floatList == aListName) {
mFloats.AppendFrames(nsnull, aFrameList);
return NS_OK;
}
else if (nsnull != aListName) {
return NS_ERROR_INVALID_ARG;
}
// Find the proper last-child for where the append should go
nsIFrame* lastKid = nsnull;
nsLineBox* lastLine = mLines.empty() ? nsnull : mLines.back();
if (lastLine) {
lastKid = lastLine->LastChild();
}
// Add frames after the last child
#ifdef NOISY_REFLOW_REASON
ListTag(stdout);
printf(": append ");
nsFrame::ListTag(stdout, aFrameList);
if (lastKid) {
printf(" after ");
nsFrame::ListTag(stdout, lastKid);
}
printf("\n");
#endif
nsresult rv = AddFrames(aFrameList, lastKid);
if (NS_SUCCEEDED(rv)) {
// Ask the parent frame to reflow me.
ReflowDirtyChild(GetPresContext()->PresShell(), nsnull);
}
return rv;
}
NS_IMETHODIMP
nsBlockFrame::InsertFrames(nsIAtom* aListName,
nsIFrame* aPrevFrame,
nsIFrame* aFrameList)
{
if (mAbsoluteContainer.GetChildListName() == aListName) {
return mAbsoluteContainer.InsertFrames(this, aListName, aPrevFrame,
aFrameList);
}
else if (nsLayoutAtoms::floatList == aListName) {
mFloats.InsertFrames(this, aPrevFrame, aFrameList);
return NS_OK;
}
#ifdef IBMBIDI
else if (nsLayoutAtoms::nextBidi == aListName) {}
#endif // IBMBIDI
else if (nsnull != aListName) {
return NS_ERROR_INVALID_ARG;
}
#ifdef NOISY_REFLOW_REASON
ListTag(stdout);
printf(": insert ");
nsFrame::ListTag(stdout, aFrameList);
if (aPrevFrame) {
printf(" after ");
nsFrame::ListTag(stdout, aPrevFrame);
}
printf("\n");
#endif
nsresult rv = AddFrames(aFrameList, aPrevFrame);
#ifdef IBMBIDI
if (aListName != nsLayoutAtoms::nextBidi)
#endif // IBMBIDI
if (NS_SUCCEEDED(rv)) {
// Ask the parent frame to reflow me.
ReflowDirtyChild(GetPresContext()->PresShell(), nsnull);
}
return rv;
}
static PRBool
ShouldPutNextSiblingOnNewLine(nsIFrame* aLastFrame)
{
nsIAtom* type = aLastFrame->GetType();
if (type == nsLayoutAtoms::brFrame)
return PR_TRUE;
if (type == nsLayoutAtoms::placeholderFrame)
return IsContinuationPlaceholder(aLastFrame);
return PR_FALSE;
}
nsresult
nsBlockFrame::AddFrames(nsIFrame* aFrameList,
nsIFrame* aPrevSibling)
{
// Clear our line cursor, since our lines may change.
ClearLineCursor();
if (nsnull == aFrameList) {
return NS_OK;
}
// If we're inserting at the beginning of our list and we have an
// inside bullet, insert after that bullet.
if (!aPrevSibling && mBullet && !HaveOutsideBullet()) {
NS_ASSERTION(!nsFrameList(aFrameList).ContainsFrame(mBullet),
"Trying to make mBullet prev sibling to itself");
aPrevSibling = mBullet;
}
nsIPresShell *presShell = GetPresContext()->PresShell();
// Attempt to find the line that contains the previous sibling
nsLineList::iterator prevSibLine = end_lines();
PRInt32 prevSiblingIndex = -1;
if (aPrevSibling) {
// XXX_perf This is technically O(N^2) in some cases, but by using
// RFind instead of Find, we make it O(N) in the most common case,
// which is appending cotent.
// Find the line that contains the previous sibling
if (! nsLineBox::RFindLineContaining(aPrevSibling,
begin_lines(), prevSibLine,
&prevSiblingIndex)) {
// Note: defensive code! RFindLineContaining must not return
// false in this case, so if it does...
NS_NOTREACHED("prev sibling not in line list");
aPrevSibling = nsnull;
prevSibLine = end_lines();
}
}
// Find the frame following aPrevSibling so that we can join up the
// two lists of frames.
nsIFrame* prevSiblingNextFrame = nsnull;
if (aPrevSibling) {
prevSiblingNextFrame = aPrevSibling->GetNextSibling();
// Split line containing aPrevSibling in two if the insertion
// point is somewhere in the middle of the line.
PRInt32 rem = prevSibLine->GetChildCount() - prevSiblingIndex - 1;
if (rem) {
// Split the line in two where the frame(s) are being inserted.
nsLineBox* line = NS_NewLineBox(presShell, prevSiblingNextFrame, rem, PR_FALSE);
if (!line) {
return NS_ERROR_OUT_OF_MEMORY;
}
mLines.after_insert(prevSibLine, line);
prevSibLine->SetChildCount(prevSibLine->GetChildCount() - rem);
prevSibLine->MarkDirty();
}
// Now (partially) join the sibling lists together
aPrevSibling->SetNextSibling(aFrameList);
}
else if (! mLines.empty()) {
prevSiblingNextFrame = mLines.front()->mFirstChild;
}
// Walk through the new frames being added and update the line data
// structures to fit.
nsIFrame* newFrame = aFrameList;
while (newFrame) {
PRBool isBlock = nsLineLayout::TreatFrameAsBlock(newFrame);
// If the frame is a block frame, or if there is no previous line or if the
// previous line is a block line or ended with a <br> then make a new line.
if (isBlock || prevSibLine == end_lines() || prevSibLine->IsBlock() ||
(aPrevSibling && ShouldPutNextSiblingOnNewLine(aPrevSibling))) {
// Create a new line for the frame and add its line to the line
// list.
nsLineBox* line = NS_NewLineBox(presShell, newFrame, 1, isBlock);
if (!line) {
return NS_ERROR_OUT_OF_MEMORY;
}
if (prevSibLine != end_lines()) {
// Append new line after prevSibLine
mLines.after_insert(prevSibLine, line);
++prevSibLine;
}
else {
// New line is going before the other lines
mLines.push_front(line);
prevSibLine = begin_lines();
}
}
else {
prevSibLine->SetChildCount(prevSibLine->GetChildCount() + 1);
prevSibLine->MarkDirty();
}
aPrevSibling = newFrame;
newFrame = newFrame->GetNextSibling();
}
if (prevSiblingNextFrame) {
// Connect the last new frame to the remainder of the sibling list
aPrevSibling->SetNextSibling(prevSiblingNextFrame);
}
#ifdef DEBUG
VerifyLines(PR_TRUE);
#endif
return NS_OK;
}
nsBlockFrame::line_iterator
nsBlockFrame::RemoveFloat(nsIFrame* aFloat) {
// Find which line contains the float, so we can update
// the float cache.
line_iterator line = begin_lines(), line_end = end_lines();
for ( ; line != line_end; ++line) {
if (line->IsInline() && line->RemoveFloat(aFloat)) {
break;
}
}
// Unlink the placeholder *after* we searched the lines, because
// the line search uses the placeholder relationship.
nsFrameManager* fm = GetPresContext()->GetPresShell()->FrameManager();
nsPlaceholderFrame* placeholder = fm->GetPlaceholderFrameFor(aFloat);
if (placeholder) {
fm->UnregisterPlaceholderFrame(placeholder);
placeholder->SetOutOfFlowFrame(nsnull);
}
// Try to destroy if it's in mFloats.
if (mFloats.DestroyFrame(GetPresContext(), aFloat)) {
return line;
}
// Try our overflow list
{
nsAutoOOFFrameList oofs(this);
if (oofs.mList.DestroyFrame(GetPresContext(), aFloat)) {
return line_end;
}
}
// If this is during reflow, it could be the out-of-flow frame for a
// placeholder in our block reflow state's mOverflowPlaceholders. But that's
// OK; it's not part of any child list, so we can just go ahead and delete it.
aFloat->Destroy(GetPresContext());
return line_end;
}
static void MarkAllDescendantLinesDirty(nsBlockFrame* aBlock)
{
nsLineList::iterator line = aBlock->begin_lines();
nsLineList::iterator endLine = aBlock->end_lines();
while (line != endLine) {
if (line->IsBlock()) {
nsIFrame* f = line->mFirstChild;
void* bf;
if (NS_SUCCEEDED(f->QueryInterface(kBlockFrameCID, &bf))) {
MarkAllDescendantLinesDirty(NS_STATIC_CAST(nsBlockFrame*, f));
}
}
line->MarkDirty();
++line;
}
}
static void MarkSameSpaceManagerLinesDirty(nsBlockFrame* aBlock)
{
nsBlockFrame* blockWithSpaceMgr = aBlock;
while (!(blockWithSpaceMgr->GetStateBits() & NS_BLOCK_SPACE_MGR)) {
void* bf;
if (NS_FAILED(blockWithSpaceMgr->GetParent()->
QueryInterface(kBlockFrameCID, &bf))) {
break;
}
blockWithSpaceMgr = NS_STATIC_CAST(nsBlockFrame*, blockWithSpaceMgr->GetParent());
}
// Mark every line at and below the line where the float was
// dirty, and mark their lines dirty too. We could probably do
// something more efficient --- e.g., just dirty the lines that intersect
// the float vertically.
MarkAllDescendantLinesDirty(blockWithSpaceMgr);
}
/**
* Returns PR_TRUE if aFrame is a block that has one or more float children.
*/
static PRBool BlockHasAnyFloats(nsIFrame* aFrame)
{
void* bf;
if (NS_FAILED(aFrame->QueryInterface(kBlockFrameCID, &bf)))
return PR_FALSE;
nsBlockFrame* block = NS_STATIC_CAST(nsBlockFrame*, aFrame);
if (block->GetFirstChild(nsLayoutAtoms::floatList))
return PR_TRUE;
nsLineList::iterator line = block->begin_lines();
nsLineList::iterator endLine = block->end_lines();
while (line != endLine) {
if (line->IsBlock() && BlockHasAnyFloats(line->mFirstChild))
return PR_TRUE;
++line;
}
return PR_FALSE;
}
NS_IMETHODIMP
nsBlockFrame::RemoveFrame(nsIAtom* aListName,
nsIFrame* aOldFrame)
{
nsresult rv = NS_OK;
#ifdef NOISY_REFLOW_REASON
ListTag(stdout);
printf(": remove ");
nsFrame::ListTag(stdout, aOldFrame);
printf("\n");
#endif
if (nsnull == aListName) {
PRBool hasFloats = BlockHasAnyFloats(aOldFrame);
rv = DoRemoveFrame(aOldFrame);
if (hasFloats) {
MarkSameSpaceManagerLinesDirty(this);
}
}
else if (mAbsoluteContainer.GetChildListName() == aListName) {
return mAbsoluteContainer.RemoveFrame(this, aListName, aOldFrame);
}
else if (nsLayoutAtoms::floatList == aListName) {
RemoveFloat(aOldFrame);
MarkSameSpaceManagerLinesDirty(this);
}
#ifdef IBMBIDI
else if (nsLayoutAtoms::nextBidi == aListName) {
// Skip the call to |ReflowDirtyChild| below by returning now.
return DoRemoveFrame(aOldFrame);
}
#endif // IBMBIDI
else {
rv = NS_ERROR_INVALID_ARG;
}
if (NS_SUCCEEDED(rv)) {
// Ask the parent frame to reflow me.
ReflowDirtyChild(GetPresContext()->PresShell(), nsnull);
}
return rv;
}
void
nsBlockFrame::DoRemoveOutOfFlowFrame(nsIFrame* aFrame)
{
// First remove aFrame's next in flow
nsIFrame* nextInFlow = aFrame->GetNextInFlow();
if (nextInFlow) {
nsBlockFrame::DoRemoveOutOfFlowFrame(nextInFlow);
}
// Now remove aFrame
const nsStyleDisplay* display = aFrame->GetStyleDisplay();
// The containing block is always the parent of aFrame.
nsBlockFrame* block = (nsBlockFrame*)aFrame->GetParent();
// Remove aFrame from the appropriate list.
if (display->IsAbsolutelyPositioned()) {
block->mAbsoluteContainer.RemoveFrame(block,
block->mAbsoluteContainer.GetChildListName(),
aFrame);
aFrame->Destroy(aFrame->GetPresContext());
}
else {
// This also destroys the frame.
block->RemoveFloat(aFrame);
}
}
/**
* This helps us iterate over the list of all normal + overflow lines
*/
void
nsBlockFrame::TryAllLines(nsLineList::iterator* aIterator,
nsLineList::iterator* aEndIterator,
PRBool* aInOverflowLines) {
if (*aIterator == *aEndIterator) {
if (!*aInOverflowLines) {
*aInOverflowLines = PR_TRUE;
// Try the overflow lines
nsLineList* overflowLines = GetOverflowLines();
if (overflowLines) {
*aIterator = overflowLines->begin();
*aEndIterator = overflowLines->end();
}
}
}
}
static nsresult RemoveBlockChild(nsIFrame* aFrame, PRBool aDestroyFrames)
{
if (!aFrame)
return NS_OK;
nsBlockFrame* nextBlock = NS_STATIC_CAST(nsBlockFrame*, aFrame->GetParent());
NS_ASSERTION(nextBlock->GetType() == nsLayoutAtoms::blockFrame ||
nextBlock->GetType() == nsLayoutAtoms::areaFrame,
"Our child's continuation's parent is not a block?");
return nextBlock->DoRemoveFrame(aFrame, aDestroyFrames);
}
// This function removes aDeletedFrame and all its continuations. It
// is optimized for deleting a whole series of frames. The easy
// implementation would invoke itself recursively on
// aDeletedFrame->GetNextInFlow, then locate the line containing
// aDeletedFrame and remove aDeletedFrame from that line. But here we
// start by locating aDeletedFrame and then scanning from that point
// on looking for continuations.
nsresult
nsBlockFrame::DoRemoveFrame(nsIFrame* aDeletedFrame, PRBool aDestroyFrames)
{
// Clear our line cursor, since our lines may change.
ClearLineCursor();
if (aDeletedFrame->GetStateBits() & NS_FRAME_OUT_OF_FLOW) {
NS_ASSERTION(aDestroyFrames, "We can't not destroy out of flows");
DoRemoveOutOfFlowFrame(aDeletedFrame);
return NS_OK;
}
nsPresContext* presContext = GetPresContext();
nsIPresShell* presShell = presContext->PresShell();
PRBool isPlaceholder = nsLayoutAtoms::placeholderFrame == aDeletedFrame->GetType();
if (isPlaceholder) {
nsFrameList* overflowPlaceholders = GetOverflowPlaceholders();
if (overflowPlaceholders && overflowPlaceholders->RemoveFrame(aDeletedFrame)) {
nsIFrame* nif = aDeletedFrame->GetNextInFlow();
if (aDestroyFrames) {
aDeletedFrame->Destroy(presContext);
} else {
aDeletedFrame->SetNextSibling(nsnull);
}
return RemoveBlockChild(nif, aDestroyFrames);
}
}
// Find the line and the previous sibling that contains
// deletedFrame; we also find the pointer to the line.
nsLineList::iterator line = mLines.begin(),
line_end = mLines.end();
PRBool searchingOverflowList = PR_FALSE;
nsIFrame* prevSibling = nsnull;
// Make sure we look in the overflow lines even if the normal line
// list is empty
TryAllLines(&line, &line_end, &searchingOverflowList);
while (line != line_end) {
nsIFrame* frame = line->mFirstChild;
PRInt32 n = line->GetChildCount();
while (--n >= 0) {
if (frame == aDeletedFrame) {
goto found_frame;
}
prevSibling = frame;
frame = frame->GetNextSibling();
}
++line;
TryAllLines(&line, &line_end, &searchingOverflowList);
}
found_frame:;
if (line == line_end) {
NS_ERROR("can't find deleted frame in lines");
return NS_ERROR_FAILURE;
}
if (prevSibling && !prevSibling->GetNextSibling()) {
// We must have found the first frame in the overflow line list. So
// there is no prevSibling
prevSibling = nsnull;
}
NS_ASSERTION(!prevSibling || prevSibling->GetNextSibling() == aDeletedFrame, "bad prevSibling");
while ((line != line_end) && (nsnull != aDeletedFrame)) {
NS_ASSERTION(this == aDeletedFrame->GetParent(), "messed up delete code");
NS_ASSERTION(line->Contains(aDeletedFrame), "frame not in line");
// If the frame being deleted is the last one on the line then
// optimize away the line->Contains(next-in-flow) call below.
PRBool isLastFrameOnLine = (1 == line->GetChildCount() ||
line->LastChild() == aDeletedFrame);
// Remove aDeletedFrame from the line
nsIFrame* nextFrame = aDeletedFrame->GetNextSibling();
if (line->mFirstChild == aDeletedFrame) {
// We should be setting this to null if aDeletedFrame
// is the only frame on the line. HOWEVER in that case
// we will be removing the line anyway, see below.
line->mFirstChild = nextFrame;
}
// Hmm, this won't do anything if we're removing a frame in the first
// overflow line... Hopefully doesn't matter
--line;
if (line != line_end && !line->IsBlock()) {
// Since we just removed a frame that follows some inline
// frames, we need to reflow the previous line.
line->MarkDirty();
}
++line;
// Take aDeletedFrame out of the sibling list. Note that
// prevSibling will only be nsnull when we are deleting the very
// first frame in the main or overflow list.
if (prevSibling) {
prevSibling->SetNextSibling(nextFrame);
}
// Update the child count of the line to be accurate
PRInt32 lineChildCount = line->GetChildCount();
lineChildCount--;
line->SetChildCount(lineChildCount);
// Destroy frame; capture its next-in-flow first in case we need
// to destroy that too.
nsIFrame* deletedNextInFlow = aDeletedFrame->GetNextInFlow();
#ifdef NOISY_REMOVE_FRAME
printf("DoRemoveFrame: %s line=%p frame=",
searchingOverflowList?"overflow":"normal", line.get());
nsFrame::ListTag(stdout, aDeletedFrame);
printf(" prevSibling=%p deletedNextInFlow=%p\n", prevSibling, deletedNextInFlow);
#endif
if (aDestroyFrames) {
aDeletedFrame->Destroy(presContext);
} else {
aDeletedFrame->SetNextSibling(nsnull);
}
aDeletedFrame = deletedNextInFlow;
PRBool haveAdvancedToNextLine = PR_FALSE;
// If line is empty, remove it now.
if (0 == lineChildCount) {
#ifdef NOISY_REMOVE_FRAME
printf("DoRemoveFrame: %s line=%p became empty so it will be removed\n",
searchingOverflowList?"overflow":"normal", line.get());
#endif
nsLineBox *cur = line;
if (!searchingOverflowList) {
line = mLines.erase(line);
// Invalidate the space taken up by the line.
// XXX We need to do this if we're removing a frame as a result of
// a call to RemoveFrame(), but we may not need to do this in all
// cases...
nsRect lineCombinedArea(cur->GetCombinedArea());
#ifdef NOISY_BLOCK_INVALIDATE
printf("%p invalidate 10 (%d, %d, %d, %d)\n",
this, lineCombinedArea.x, lineCombinedArea.y,
lineCombinedArea.width, lineCombinedArea.height);
#endif
Invalidate(lineCombinedArea);
} else {
nsLineList* lineList = RemoveOverflowLines();
line = lineList->erase(line);
if (!lineList->empty()) {
SetOverflowLines(lineList);
}
}
cur->Destroy(presShell);
// If we're removing a line, ReflowDirtyLines isn't going to
// know that it needs to slide lines unless something is marked
// dirty. So mark the previous margin of the next line dirty if
// there is one.
if (line != line_end) {
line->MarkPreviousMarginDirty();
}
haveAdvancedToNextLine = PR_TRUE;
} else {
// Make the line that just lost a frame dirty, and advance to
// the next line.
if (!deletedNextInFlow || isLastFrameOnLine ||
!line->Contains(deletedNextInFlow)) {
line->MarkDirty();
++line;
haveAdvancedToNextLine = PR_TRUE;
}
}
if (deletedNextInFlow) {
// Continuations for placeholder frames don't always appear in
// consecutive lines. So for placeholders, just continue the slow easy way.
if (isPlaceholder) {
return RemoveBlockChild(deletedNextInFlow, aDestroyFrames);
}
// See if we should keep looking in the current flow's line list.
if (deletedNextInFlow->GetParent() != this) {
// The deceased frames continuation is not a child of the
// current block. So break out of the loop so that we advance
// to the next parent.
break;
}
// If we advanced to the next line then check if we should switch to the
// overflow line list.
if (haveAdvancedToNextLine) {
if (line != line_end && !searchingOverflowList &&
!line->Contains(deletedNextInFlow)) {
// We have advanced to the next *normal* line but the next-in-flow
// is not there - force a switch to the overflow line list.
line = line_end;
}
PRBool wasSearchingOverflowList = searchingOverflowList;
TryAllLines(&line, &line_end, &searchingOverflowList);
if (NS_UNLIKELY(searchingOverflowList && !wasSearchingOverflowList &&
prevSibling)) {
// We switched to the overflow line list and we have a prev sibling
// (in the main list), in this case we don't want to pick up any
// sibling list from the deceased frames (bug 344557).
prevSibling->SetNextSibling(nsnull);
prevSibling = nsnull;
}
#ifdef NOISY_REMOVE_FRAME
printf("DoRemoveFrame: now on %s line=%p prevSibling=%p\n",
searchingOverflowList?"overflow":"normal", line.get(),
prevSibling);
#endif
}
}
}
#ifdef DEBUG
VerifyLines(PR_TRUE);
#endif
// Advance to next flow block if the frame has more continuations
return RemoveBlockChild(aDeletedFrame, aDestroyFrames);
}
void
nsBlockFrame::DeleteNextInFlowChild(nsPresContext* aPresContext,
nsIFrame* aNextInFlow)
{
nsIFrame* prevInFlow = aNextInFlow->GetPrevInFlow();
NS_PRECONDITION(prevInFlow, "bad next-in-flow");
NS_PRECONDITION(IsChild(aNextInFlow), "bad geometric parent");
#ifdef IBMBIDI
if (!(prevInFlow->GetStateBits() & NS_FRAME_IS_BIDI) ||
(NS_STATIC_CAST(nsIFrame*,
aPresContext->PropertyTable()->GetProperty(prevInFlow, nsLayoutAtoms::nextBidi)) !=
aNextInFlow))
#endif // IBMBIDI
DoRemoveFrame(aNextInFlow);
}
////////////////////////////////////////////////////////////////////////
// Float support
nsresult
nsBlockFrame::ReflowFloat(nsBlockReflowState& aState,
nsPlaceholderFrame* aPlaceholder,
nsFloatCache* aFloatCache,
nsReflowStatus& aReflowStatus)
{
// Reflow the float.
nsIFrame* floatFrame = aPlaceholder->GetOutOfFlowFrame();
aReflowStatus = NS_FRAME_COMPLETE;
#ifdef NOISY_FLOAT
printf("Reflow Float %p in parent %p, availSpace(%d,%d,%d,%d)\n",
aPlaceholder->GetOutOfFlowFrame(), this,
aState.mAvailSpaceRect.x, aState.mAvailSpaceRect.y,
aState.mAvailSpaceRect.width, aState.mAvailSpaceRect.height
);
#endif
// Compute the available width. By default, assume the width of the
// containing block.
nscoord availWidth;
if (aState.GetFlag(BRS_UNCONSTRAINEDWIDTH)) {
availWidth = NS_UNCONSTRAINEDSIZE;
}
else {
const nsStyleDisplay* floatDisplay = floatFrame->GetStyleDisplay();
if (NS_STYLE_DISPLAY_TABLE != floatDisplay->mDisplay ||
eCompatibility_NavQuirks != aState.mPresContext->CompatibilityMode() ) {
availWidth = aState.mContentArea.width;
}
else {
// This quirk matches the one in nsBlockReflowState::FlowAndPlaceFloat
// give tables only the available space
// if they can shrink we may not be constrained to place
// them in the next line
availWidth = aState.mAvailSpaceRect.width;
// round down to twips per pixel so that we fit
// needed when prev. float has procentage width
// (maybe is a table flaw that makes table chose to round up
// but i don't want to change that, too risky)
nscoord twp = aState.mPresContext->IntScaledPixelsToTwips(1);
availWidth -= availWidth % twp;
}
}
nscoord availHeight = NS_UNCONSTRAINEDSIZE == aState.mContentArea.height
? NS_UNCONSTRAINEDSIZE
: PR_MAX(0, aState.mContentArea.height - aState.mY);
// If the float's width is automatic, we can't let the float's
// width shrink below its maxElementWidth.
const nsStylePosition* position = floatFrame->GetStylePosition();
PRBool isAutoWidth = (eStyleUnit_Auto == position->mWidth.GetUnit());
// We'll need to compute the max element size if either 1) we're
// auto-width or 2) the state wanted us to compute it anyway.
PRBool computeMaxElementWidth =
isAutoWidth || aState.GetFlag(BRS_COMPUTEMAXELEMENTWIDTH);
nsRect availSpace(aState.BorderPadding().left,
aState.BorderPadding().top,
availWidth, availHeight);
// construct the html reflow state for the float. ReflowBlock will
// initialize it.
nsHTMLReflowState floatRS(aState.mPresContext, aState.mReflowState,
floatFrame,
nsSize(availSpace.width, availSpace.height),
aState.mReflowState.reason);
// Setup a block reflow state to reflow the float.
nsBlockReflowContext brc(aState.mPresContext, aState.mReflowState,
computeMaxElementWidth,
aState.GetFlag(BRS_COMPUTEMAXWIDTH));
// Reflow the float
PRBool isAdjacentWithTop = aState.IsAdjacentWithTop();
nsIFrame* clearanceFrame = nsnull;
nsresult rv;
do {
nsCollapsingMargin margin;
PRBool mayNeedRetry = PR_FALSE;
floatRS.mDiscoveredClearance = nsnull;
// Only first in flow gets a top margin.
if (!floatFrame->GetPrevInFlow()) {
nsBlockReflowContext::ComputeCollapsedTopMargin(floatRS, &margin,
clearanceFrame, &mayNeedRetry);
if (mayNeedRetry && !clearanceFrame) {
floatRS.mDiscoveredClearance = &clearanceFrame;
// We don't need to push the space manager state because the the block has its own
// space manager that will be destroyed and recreated
}
}
rv = brc.ReflowBlock(availSpace, PR_TRUE, margin,
0, isAdjacentWithTop,
aFloatCache->mOffsets, floatRS,
aReflowStatus);
} while (NS_SUCCEEDED(rv) && clearanceFrame);
// An incomplete reflow status means we should split the float
// if the height is constrained (bug 145305).
if (NS_FRAME_IS_NOT_COMPLETE(aReflowStatus) && (NS_UNCONSTRAINEDSIZE == availHeight))
aReflowStatus = NS_FRAME_COMPLETE;
if (NS_FRAME_IS_COMPLETE(aReflowStatus)) {
// Float is now complete, so delete the placeholder's next in
// flows, if any; their floats (which are this float's continuations)
// have already been deleted.
// XXX won't this be done later in nsLineLayout::ReflowFrame anyway??
nsIFrame* nextInFlow = aPlaceholder->GetNextInFlow();
if (nextInFlow) {
NS_STATIC_CAST(nsHTMLContainerFrame*, nextInFlow->GetParent())
->DeleteNextInFlowChild(aState.mPresContext, nextInFlow);
// that takes care of all subsequent nextinflows too
}
}
if (aReflowStatus & NS_FRAME_REFLOW_NEXTINFLOW) {
aState.mReflowStatus |= NS_FRAME_REFLOW_NEXTINFLOW;
}
if (NS_SUCCEEDED(rv) && isAutoWidth) {
nscoord maxElementWidth = brc.GetMaxElementWidth();
if (maxElementWidth > availSpace.width) {
// The float's maxElementWidth is larger than the available
// width. Reflow it again, this time pinning the width to the
// maxElementWidth.
availSpace.width = maxElementWidth;
// construct the html reflow state for the float.
// ReflowBlock will initialize it.
nsHTMLReflowState redoFloatRS(aState.mPresContext, aState.mReflowState,
floatFrame,
nsSize(availSpace.width, availSpace.height),
aState.mReflowState.reason);
clearanceFrame = nsnull;
do {
nsCollapsingMargin marginMEW;
PRBool mayNeedRetry = PR_FALSE;
nsBlockReflowContext::ComputeCollapsedTopMargin(redoFloatRS, &marginMEW, clearanceFrame, &mayNeedRetry);
if (mayNeedRetry && !clearanceFrame) {
redoFloatRS.mDiscoveredClearance = &clearanceFrame;
// We don't need to push the space manager state because the
// the block has its own space manager that will be
// destroyed and recreated
} else {
redoFloatRS.mDiscoveredClearance = nsnull;
}
rv = brc.ReflowBlock(availSpace, PR_TRUE, marginMEW,
0, isAdjacentWithTop,
aFloatCache->mOffsets, redoFloatRS,
aReflowStatus);
} while (NS_SUCCEEDED(rv) && clearanceFrame);
}
}
if (floatFrame->GetType() == nsLayoutAtoms::letterFrame) {
// We never split floating first letters; an incomplete state for
// such frames simply means that there is more content to be
// reflowed on the line.
if (NS_FRAME_IS_NOT_COMPLETE(aReflowStatus))
aReflowStatus = NS_FRAME_COMPLETE;
}
// Remove the float from the reflow tree.
if (aState.mReflowState.path)
aState.mReflowState.path->RemoveChild(floatFrame);
if (NS_FAILED(rv)) {
return rv;
}
// Capture the margin information for the caller
const nsMargin& m = brc.GetMargin();
aFloatCache->mMargins.top = brc.GetTopMargin();
aFloatCache->mMargins.right = m.right;
// Only last in flows get a bottom margin
if (NS_FRAME_IS_COMPLETE(aReflowStatus)) {
brc.GetCarriedOutBottomMargin().Include(m.bottom);
}
aFloatCache->mMargins.bottom = brc.GetCarriedOutBottomMargin().get();
aFloatCache->mMargins.left = m.left;
const nsHTMLReflowMetrics& metrics = brc.GetMetrics();
aFloatCache->mCombinedArea = metrics.mOverflowArea;
// Set the rect, make sure the view is properly sized and positioned,
// and tell the frame we're done reflowing it
// XXXldb This seems like the wrong place to be doing this -- shouldn't
// we be doing this in nsBlockReflowState::FlowAndPlaceFloat after
// we've positioned the float, and shouldn't we be doing the equivalent
// of |::PlaceFrameView| here?
floatFrame->SetSize(nsSize(metrics.width, metrics.height));
if (floatFrame->HasView()) {
nsContainerFrame::SyncFrameViewAfterReflow(aState.mPresContext, floatFrame,
floatFrame->GetView(),
&metrics.mOverflowArea,
NS_FRAME_NO_MOVE_VIEW);
}
// Pass floatRS so the frame hierarchy can be used (redoFloatRS has the same hierarchy)
floatFrame->DidReflow(aState.mPresContext, &floatRS,
NS_FRAME_REFLOW_FINISHED);
// If we computed it, then stash away the max-element-width for later
if (aState.GetFlag(BRS_COMPUTEMAXELEMENTWIDTH)) {
nscoord mew = brc.GetMaxElementWidth() +
aFloatCache->mMargins.left + aFloatCache->mMargins.right;
// This is all we need to do to include the float
// max-element-width since we don't require that we end up with
// content next to floats.
aState.UpdateMaxElementWidth(mew); // fix for bug 13553
// Allow the float width to be restored in state recovery.
aFloatCache->mMaxElementWidth = mew;
}
#ifdef NOISY_FLOAT
printf("end ReflowFloat %p, sized to %d,%d\n",
floatFrame, metrics.width, metrics.height);
#endif
// If the placeholder was continued and its first-in-flow was followed by a
// <BR>, then cache the <BR>'s break type in aState.mFloatBreakType so that
// the next frame after the placeholder can combine that break type with its own
nsIFrame* prevPlaceholder = aPlaceholder->GetPrevInFlow();
if (prevPlaceholder) {
// the break occurs only after the last continued placeholder
PRBool lastPlaceholder = PR_TRUE;
nsIFrame* next = aPlaceholder->GetNextSibling();
if (next) {
if (nsLayoutAtoms::placeholderFrame == next->GetType()) {
lastPlaceholder = PR_FALSE;
}
}
if (lastPlaceholder) {
// get the containing block of prevPlaceholder which is our prev-in-flow
if (mPrevInFlow) {
// get the break type of the last line in mPrevInFlow
line_iterator endLine = --((nsBlockFrame*)mPrevInFlow)->end_lines();
if (endLine->HasFloatBreakAfter()) {
aState.mFloatBreakType = endLine->GetBreakTypeAfter();
}
}
else NS_ASSERTION(PR_FALSE, "no prev in flow");
}
}
return NS_OK;
}
//////////////////////////////////////////////////////////////////////
// Painting, event handling
PRIntn
nsBlockFrame::GetSkipSides() const
{
PRIntn skip = 0;
if (nsnull != mPrevInFlow) {
skip |= 1 << NS_SIDE_TOP;
}
if (nsnull != mNextInFlow) {
skip |= 1 << NS_SIDE_BOTTOM;
}
return skip;
}
#ifdef DEBUG
static void ComputeCombinedArea(nsLineList& aLines,
nscoord aWidth, nscoord aHeight,
nsRect& aResult)
{
nscoord xa = 0, ya = 0, xb = aWidth, yb = aHeight;
for (nsLineList::iterator line = aLines.begin(), line_end = aLines.end();
line != line_end;
++line) {
// Compute min and max x/y values for the reflowed frame's
// combined areas
nsRect lineCombinedArea(line->GetCombinedArea());
nscoord x = lineCombinedArea.x;
nscoord y = lineCombinedArea.y;
nscoord xmost = x + lineCombinedArea.width;
nscoord ymost = y + lineCombinedArea.height;
if (x < xa) {
xa = x;
}
if (xmost > xb) {
xb = xmost;
}
if (y < ya) {
ya = y;
}
if (ymost > yb) {
yb = ymost;
}
}
aResult.x = xa;
aResult.y = ya;
aResult.width = xb - xa;
aResult.height = yb - ya;
}
#endif
NS_IMETHODIMP
nsBlockFrame::IsVisibleForPainting(nsPresContext * aPresContext,
nsIRenderingContext& aRenderingContext,
PRBool aCheckVis,
PRBool* aIsVisible)
{
// first check to see if we are visible
if (aCheckVis) {
if (!GetStyleVisibility()->IsVisible()) {
*aIsVisible = PR_FALSE;
return NS_OK;
}
}
// Start by assuming we are visible and need to be painted
*aIsVisible = PR_TRUE;
// NOTE: GetSelectionforVisCheck checks the pagination to make sure we are printing
// In otherwords, the selection will ALWAYS be null if we are not printing, meaning
// the visibility will be TRUE in that case
nsCOMPtr<nsISelection> selection;
nsresult rv = GetSelectionForVisCheck(aPresContext, getter_AddRefs(selection));
if (NS_SUCCEEDED(rv) && selection) {
nsCOMPtr<nsIDOMNode> node(do_QueryInterface(mContent));
nsCOMPtr<nsIDOMHTMLHtmlElement> html(do_QueryInterface(mContent));
nsCOMPtr<nsIDOMHTMLBodyElement> body(do_QueryInterface(mContent));
if (!html && !body) {
rv = selection->ContainsNode(node, PR_TRUE, aIsVisible);
}
}
return rv;
}
/* virtual */ void
nsBlockFrame::PaintTextDecorationLines(nsIRenderingContext& aRenderingContext,
nscolor aColor,
nscoord aOffset,
nscoord aAscent,
nscoord aSize)
{
aRenderingContext.SetColor(aColor);
for (nsLineList::iterator line = begin_lines(), line_start = line,
line_end = end_lines();
line != line_end; ++line) {
if (!line->IsBlock()) {
nscoord start = line->mBounds.x;
nscoord width = line->mBounds.width;
if (line == line_start) {
// Adjust for the text-indent. See similar code in
// nsLineLayout::BeginLineReflow.
nscoord indent = 0;
const nsStyleText* styleText = GetStyleText();
nsStyleUnit unit = styleText->mTextIndent.GetUnit();
if (eStyleUnit_Coord == unit) {
indent = styleText->mTextIndent.GetCoordValue();
} else if (eStyleUnit_Percent == unit) {
// It's a percentage of the containing block width.
nsIFrame* containingBlock =
nsHTMLReflowState::GetContainingBlockFor(this);
NS_ASSERTION(containingBlock, "Must have containing block!");
indent = nscoord(styleText->mTextIndent.GetPercentValue() *
containingBlock->GetRect().width);
}
// Adjust the start position and the width of the decoration by the
// value of the indent. Note that indent can be negative; that's OK.
// It'll just increase the width (which can also happen to be
// negative!).
start += indent;
width -= indent;
}
// Only paint if we have a positive width
if (width > 0) {
aRenderingContext.FillRect(start,
line->mBounds.y + line->GetAscent() - aOffset,
width, aSize);
}
}
}
}
NS_IMETHODIMP
nsBlockFrame::Paint(nsPresContext* aPresContext,
nsIRenderingContext& aRenderingContext,
const nsRect& aDirtyRect,
nsFramePaintLayer aWhichLayer,
PRUint32 aFlags)
{
if (NS_FRAME_IS_UNFLOWABLE & mState) {
return NS_OK;
}
#ifdef DEBUG
if (gNoisyDamageRepair) {
if (NS_FRAME_PAINT_LAYER_BACKGROUND == aWhichLayer) {
PRInt32 depth = GetDepth();
nsRect ca;
::ComputeCombinedArea(mLines, mRect.width, mRect.height, ca);
nsFrame::IndentBy(stdout, depth);
ListTag(stdout);
printf(": bounds=%d,%d,%d,%d dirty=%d,%d,%d,%d ca=%d,%d,%d,%d\n",
mRect.x, mRect.y, mRect.width, mRect.height,
aDirtyRect.x, aDirtyRect.y, aDirtyRect.width, aDirtyRect.height,
ca.x, ca.y, ca.width, ca.height);
}
}
#endif
if (NS_FRAME_PAINT_LAYER_BACKGROUND == aWhichLayer) {
PaintSelf(aPresContext, aRenderingContext, aDirtyRect);
}
PRBool paintingSuppressed = PR_FALSE;
aPresContext->PresShell()->IsPaintingSuppressed(&paintingSuppressed);
if (paintingSuppressed)
return NS_OK;
const nsStyleDisplay* disp = GetStyleDisplay();
// If overflow is hidden then set the clip rect so that children don't
// leak out of us. Note that because overflow'-clip' only applies to
// the content area we do this after painting the border and background
if (NS_STYLE_OVERFLOW_CLIP == disp->mOverflowX) {
aRenderingContext.PushState();
SetOverflowClipRect(aRenderingContext);
}
// Child elements have the opportunity to override the visibility
// property and display even if the parent is hidden
if (NS_FRAME_PAINT_LAYER_FLOATS == aWhichLayer) {
PaintFloats(aPresContext, aRenderingContext, aDirtyRect);
}
PaintDecorationsAndChildren(aPresContext, aRenderingContext,
aDirtyRect, aWhichLayer, PR_TRUE);
if (NS_STYLE_OVERFLOW_CLIP == disp->mOverflowX)
aRenderingContext.PopState();
#if 0
if ((NS_FRAME_PAINT_LAYER_DEBUG == aWhichLayer) && GetShowFrameBorders()) {
// Render the bands in the spacemanager
nsSpaceManager* sm = mSpaceManager;
if (nsnull != sm) {
nsBlockBandData band;
band.Init(sm, nsSize(mRect.width, mRect.height));
nscoord y = 0;
while (y < mRect.height) {
nsRect availArea;
band.GetAvailableSpace(y, PR_FALSE, availArea);
// Render a box and a diagonal line through the band
aRenderingContext.SetColor(NS_RGB(0,255,0));
aRenderingContext.DrawRect(0, availArea.y,
mRect.width, availArea.height);
aRenderingContext.DrawLine(0, availArea.y,
mRect.width, availArea.YMost());
// Render boxes and opposite diagonal lines around the
// unavailable parts of the band.
PRInt32 i;
for (i = 0; i < band.GetTrapezoidCount(); i++) {
const nsBandTrapezoid* trapezoid = band.GetTrapezoid(i);
if (nsBandTrapezoid::Available != trapezoid->mState) {
nsRect r = trapezoid->GetRect();
if (nsBandTrapezoid::OccupiedMultiple == trapezoid->mState) {
aRenderingContext.SetColor(NS_RGB(0,255,128));
}
else {
aRenderingContext.SetColor(NS_RGB(128,255,0));
}
aRenderingContext.DrawRect(r);
aRenderingContext.DrawLine(r.x, r.YMost(), r.XMost(), r.y);
}
}
y = availArea.YMost();
}
}
}
#endif
return NS_OK;
}
void
nsBlockFrame::PaintFloats(nsPresContext* aPresContext,
nsIRenderingContext& aRenderingContext,
const nsRect& aDirtyRect)
{
for (nsIFrame* floatFrame = mFloats.FirstChild();
floatFrame;
floatFrame = floatFrame->GetNextSibling()) {
PaintChild(aPresContext, aRenderingContext, aDirtyRect,
floatFrame, NS_FRAME_PAINT_LAYER_BACKGROUND);
PaintChild(aPresContext, aRenderingContext, aDirtyRect,
floatFrame, NS_FRAME_PAINT_LAYER_FLOATS);
PaintChild(aPresContext, aRenderingContext, aDirtyRect,
floatFrame, NS_FRAME_PAINT_LAYER_FOREGROUND);
}
}
#ifdef DEBUG
static void DebugOutputDrawLine(nsFramePaintLayer aWhichLayer, PRInt32 aDepth,
nsLineBox* aLine, PRBool aDrawn) {
if (nsBlockFrame::gNoisyDamageRepair &&
(NS_FRAME_PAINT_LAYER_BACKGROUND == aWhichLayer)) {
nsFrame::IndentBy(stdout, aDepth+1);
nsRect lineArea = aLine->GetCombinedArea();
printf("%s line=%p bounds=%d,%d,%d,%d ca=%d,%d,%d,%d\n",
aDrawn ? "draw" : "skip",
NS_STATIC_CAST(void*, aLine),
aLine->mBounds.x, aLine->mBounds.y,
aLine->mBounds.width, aLine->mBounds.height,
lineArea.x, lineArea.y,
lineArea.width, lineArea.height);
}
}
#endif
static inline void
PaintLine(const nsRect& aLineArea, const nsRect& aDirtyRect,
nsBlockFrame::line_iterator& aLine, PRInt32 aDepth,
PRInt32& aDrawnLines, nsPresContext* aPresContext,
nsIRenderingContext& aRenderingContext,
nsFramePaintLayer aWhichLayer, nsBlockFrame* aFrame) {
// If the line's combined area (which includes child frames that
// stick outside of the line's bounding box or our bounding box)
// intersects the dirty rect then paint the line.
if (aLineArea.Intersects(aDirtyRect)) {
#ifdef DEBUG
DebugOutputDrawLine(aWhichLayer, aDepth, aLine.get(), PR_TRUE);
if (nsBlockFrame::gLamePaintMetrics) {
aDrawnLines++;
}
#endif
nsIFrame* kid = aLine->mFirstChild;
PRInt32 n = aLine->GetChildCount();
while (--n >= 0) {
aFrame->PaintChild(aPresContext, aRenderingContext, aDirtyRect, kid,
aWhichLayer);
kid = kid->GetNextSibling();
}
}
#ifdef DEBUG
else {
DebugOutputDrawLine(aWhichLayer, aDepth, aLine.get(), PR_FALSE);
}
#endif
}
void
nsBlockFrame::PaintChildren(nsPresContext* aPresContext,
nsIRenderingContext& aRenderingContext,
const nsRect& aDirtyRect,
nsFramePaintLayer aWhichLayer,
PRUint32 aFlags)
{
PRInt32 drawnLines; // Will only be used if set (gLamePaintMetrics).
PRInt32 depth = 0;
#ifdef DEBUG
if (gNoisyDamageRepair) {
if (NS_FRAME_PAINT_LAYER_BACKGROUND == aWhichLayer) {
depth = GetDepth();
}
}
PRTime start = LL_ZERO; // Initialize these variables to silence the compiler.
if (gLamePaintMetrics) {
start = PR_Now();
drawnLines = 0;
}
#endif
nsLineBox* cursor = GetFirstLineContaining(aDirtyRect.y);
line_iterator line_end = end_lines();
if (cursor) {
for (line_iterator line = mLines.begin(cursor);
line != line_end;
++line) {
nsRect lineArea = line->GetCombinedArea();
if (!lineArea.IsEmpty()) {
// Because we have a cursor, the combinedArea.ys are non-decreasing.
// Once we've passed aDirtyRect.YMost(), we can never see it again.
if (lineArea.y >= aDirtyRect.YMost()) {
break;
}
PaintLine(lineArea, aDirtyRect, line, depth, drawnLines, aPresContext,
aRenderingContext, aWhichLayer, this);
}
}
} else {
PRBool nonDecreasingYs = PR_TRUE;
PRInt32 lineCount = 0;
nscoord lastY = PR_INT32_MIN;
nscoord lastYMost = PR_INT32_MIN;
for (line_iterator line = begin_lines();
line != line_end;
++line) {
nsRect lineArea = line->GetCombinedArea();
if (!lineArea.IsEmpty()) {
if (lineArea.y < lastY
|| lineArea.YMost() < lastYMost) {
nonDecreasingYs = PR_FALSE;
}
lastY = lineArea.y;
lastYMost = lineArea.YMost();
PaintLine(lineArea, aDirtyRect, line, depth, drawnLines, aPresContext,
aRenderingContext, aWhichLayer, this);
}
lineCount++;
}
if (nonDecreasingYs && lineCount >= MIN_LINES_NEEDING_CURSOR) {
SetupLineCursor();
}
}
if (NS_FRAME_PAINT_LAYER_FOREGROUND == aWhichLayer) {
if ((nsnull != mBullet) && HaveOutsideBullet()) {
// Paint outside bullets manually
PaintChild(aPresContext, aRenderingContext, aDirtyRect, mBullet,
aWhichLayer);
}
}
#ifdef DEBUG
if (gLamePaintMetrics) {
PRTime end = PR_Now();
PRInt32 numLines = mLines.size();
if (!numLines) numLines = 1;
PRTime lines, deltaPerLine, delta;
LL_I2L(lines, numLines);
LL_SUB(delta, end, start);
LL_DIV(deltaPerLine, delta, lines);
ListTag(stdout);
char buf[400];
PR_snprintf(buf, sizeof(buf),
": %lld elapsed (%lld per line) lines=%d drawn=%d skip=%d",
delta, deltaPerLine,
numLines, drawnLines, numLines - drawnLines);
printf("%s\n", buf);
}
#endif
}
// XXXldb Does this handle all overlap cases correctly? (How?)
nsresult
nsBlockFrame::GetClosestLine(nsILineIterator *aLI,
const nsPoint &aPoint,
PRInt32 &aClosestLine)
{
if (!aLI)
return NS_ERROR_NULL_POINTER;
nsRect rect;
PRInt32 numLines;
PRInt32 lineFrameCount;
nsIFrame *firstFrame;
PRUint32 flags;
nsresult result = aLI->GetNumLines(&numLines);
if (NS_FAILED(result) || numLines < 0)
return NS_OK;//do not handle
PRInt32 shifted = numLines;
PRInt32 start = 0, midpoint = 0;
PRInt32 y = 0;
while(shifted > 0)
{
// Cut the number of lines to look at in half and
// calculate the midpoint of the region we are looking at.
shifted >>= 1; //divide by 2
midpoint = start + shifted;
// Get the dimensions of the line that is at the half
// point of the region we are looking at.
result = aLI->GetLine(midpoint, &firstFrame, &lineFrameCount,rect,&flags);
if (NS_FAILED(result))
break;//do not handle
// Check to see if our point lies with the line's Y bounds.
y = aPoint.y - rect.y;
if (y >=0 && (aPoint.y < (rect.y+rect.height)))
{
aClosestLine = midpoint; //spot on!
return NS_OK;
}
if (y > 0)
{
// If we get here, no match was found above, so aPoint.y must
// be greater than the Y bounds of the current line rect. Move
// our starting point just beyond the midpoint of the current region.
start = midpoint;
if (numLines > 1 && start < (numLines - 1))
++start;
else
shifted = 0;
}
}
// Make sure we don't go off the edge in either direction!
NS_ASSERTION(start >=0 && start <= numLines, "Invalid start calculated.");
if (start < 0)
start = 0;
else if (start >= numLines)
start = numLines - 1;
aClosestLine = start; //close as we could come
return NS_OK;
}
NS_IMETHODIMP
nsBlockFrame::HandleEvent(nsPresContext* aPresContext,
nsGUIEvent* aEvent,
nsEventStatus* aEventStatus)
{
nsresult result;
nsIPresShell *shell = nsnull;
if (aEvent->message == NS_MOUSE_MOVE) {
shell = aPresContext->GetPresShell();
if (!shell)
return NS_OK;
nsCOMPtr<nsIFrameSelection> frameSelection;
PRBool mouseDown = PR_FALSE;
//check to see if we need to ask the selection controller..
if (mState & NS_FRAME_INDEPENDENT_SELECTION)
{
nsCOMPtr<nsISelectionController> selCon;
result = GetSelectionController(aPresContext, getter_AddRefs(selCon));
if (NS_FAILED(result) || !selCon)
return result?result:NS_ERROR_FAILURE;
frameSelection = do_QueryInterface(selCon);
}
else
frameSelection = shell->FrameSelection();
if (!frameSelection || NS_FAILED(frameSelection->GetMouseDownState(&mouseDown)) || !mouseDown)
return NS_OK;//do not handle
}
if (aEvent->message == NS_MOUSE_LEFT_BUTTON_DOWN || aEvent->message == NS_MOUSE_MOVE ||
aEvent->message == NS_MOUSE_LEFT_DOUBLECLICK ) {
nsMouseEvent *me = (nsMouseEvent *)aEvent;
nsIFrame *resultFrame = nsnull;//this will be passed the handle event when we
//can tell who to pass it to
nsIFrame *mainframe = this;
shell = aPresContext->GetPresShell();
if (!shell)
return NS_OK;
nsCOMPtr<nsILineIterator> it( do_QueryInterface(mainframe, &result) );
nsPeekOffsetStruct pos;
nsPoint viewOffset;
nsIView* parentWithView;
GetOffsetFromView(viewOffset, &parentWithView);
// The offset returned by GetOffsetFromView is not trustworthy.
// It's just the sum of frame positions and is not the true
// geometric offset. So recalculate the true geometric offset.
NS_ASSERTION(nsLayoutUtils::GetFrameFor(parentWithView),
"GetOffsetFromView shouldn't be returning a frameless view");
viewOffset = GetOffsetTo(nsLayoutUtils::GetFrameFor(parentWithView));
while(NS_OK == result)
{ //we are starting aloop to allow us to "drill down to the one we want"
PRInt32 closestLine;
// aEvent->point is relative to our view. We need to make it relative to
// mainframe, via this frame.
if (NS_FAILED(result = GetClosestLine(it,
aEvent->point - viewOffset - mainframe->GetOffsetTo(this), closestLine)))
return result;
//we will now ask where to go. if we cant find what we want"aka another block frame"
//we drill down again
pos.mShell = shell;
pos.mDirection = eDirNext;
pos.mDesiredX = aEvent->point.x;
pos.mScrollViewStop = PR_FALSE;
pos.mIsKeyboardSelect = PR_FALSE;
result = nsFrame::GetNextPrevLineFromeBlockFrame(aPresContext,
&pos,
mainframe,
closestLine-1,
0
);
if (NS_SUCCEEDED(result) && pos.mResultFrame){
if (result == NS_OK)
it = do_QueryInterface(pos.mResultFrame, &result);//if this fails thats ok
resultFrame = pos.mResultFrame;
mainframe = resultFrame;
}
else
break;//time to go nothing was found
}
//end while loop. if nssucceeded resutl then keep going that means
//we have successfully hit another block frame and we should keep going.
if (resultFrame)
{
// Translate aEvent->point to resultFrame's closest view (bug 180015).
nsPoint tmp;
nsIView* resultFrameParentView;
resultFrame->GetOffsetFromView(tmp, &resultFrameParentView);
if (parentWithView != resultFrameParentView && resultFrameParentView) {
aEvent->point -= resultFrameParentView->GetOffsetTo(parentWithView);
}
if (NS_POSITION_BEFORE_TABLE == result)
{
nsCOMPtr<nsISelectionController> selCon;
result = GetSelectionController(aPresContext, getter_AddRefs(selCon));
//get the selection controller
if (NS_SUCCEEDED(result) && selCon)
{
PRInt16 displayresult;
selCon->GetDisplaySelection(&displayresult);
if (displayresult == nsISelectionController::SELECTION_OFF)
return NS_OK;//nothing to do we cannot affect selection from here
}
PRBool mouseDown = aEvent->message == NS_MOUSE_MOVE;
result = shell->FrameSelection()->HandleClick(pos.mResultContent,
pos.mContentOffset,
pos.mContentOffsetEnd,
mouseDown || me->isShift,
PR_FALSE,
pos.mPreferLeft);
}
else
result = resultFrame->HandleEvent(aPresContext, aEvent, aEventStatus);//else let the frame/container do what it needs
/* Note that the above call to HandleEvent may capture the
mouse. If so, don't try to capture again. */
if (aEvent->message == NS_MOUSE_LEFT_BUTTON_DOWN && !IsMouseCaptured(aPresContext))
CaptureMouse(aPresContext, PR_TRUE);
return result;
}
else
{
return NS_OK; //just stop it
}
}
return nsFrame::HandleEvent(aPresContext, aEvent, aEventStatus);
}
#ifdef ACCESSIBILITY
NS_IMETHODIMP nsBlockFrame::GetAccessible(nsIAccessible** aAccessible)
{
*aAccessible = nsnull;
nsCOMPtr<nsIAccessibilityService> accService =
do_GetService("@mozilla.org/accessibilityService;1");
NS_ENSURE_TRUE(accService, NS_ERROR_FAILURE);
// treat <hr> as block element instead of inline.
if (mContent->Tag() == nsHTMLAtoms::hr) {
return accService->CreateHTMLHRAccessible(NS_STATIC_CAST(nsIFrame*, this), aAccessible);
}
nsPresContext *aPresContext = GetPresContext();
if (!mBullet || !aPresContext) {
return NS_ERROR_FAILURE;
}
const nsStyleList* myList = GetStyleList();
nsAutoString bulletText;
if (myList->mListStyleImage || myList->mListStyleType == NS_STYLE_LIST_STYLE_DISC ||
myList->mListStyleType == NS_STYLE_LIST_STYLE_CIRCLE ||
myList->mListStyleType == NS_STYLE_LIST_STYLE_SQUARE) {
bulletText.Assign(PRUnichar(0x2022));; // Unicode bullet character
}
else if (myList->mListStyleType != NS_STYLE_LIST_STYLE_NONE) {
mBullet->GetListItemText(*myList, bulletText);
}
return accService->CreateHTMLLIAccessible(NS_STATIC_CAST(nsIFrame*, this),
NS_STATIC_CAST(nsIFrame*, mBullet),
bulletText,
aAccessible);
}
#endif
void nsBlockFrame::ClearLineCursor() {
if (!(GetStateBits() & NS_BLOCK_HAS_LINE_CURSOR)) {
return;
}
UnsetProperty(nsLayoutAtoms::lineCursorProperty);
RemoveStateBits(NS_BLOCK_HAS_LINE_CURSOR);
}
void nsBlockFrame::SetupLineCursor() {
if (GetStateBits() & NS_BLOCK_HAS_LINE_CURSOR
|| mLines.empty()) {
return;
}
SetProperty(nsLayoutAtoms::lineCursorProperty,
mLines.front(), nsnull);
AddStateBits(NS_BLOCK_HAS_LINE_CURSOR);
}
nsLineBox* nsBlockFrame::GetFirstLineContaining(nscoord y) {
if (!(GetStateBits() & NS_BLOCK_HAS_LINE_CURSOR)) {
return nsnull;
}
nsLineBox* property = NS_STATIC_CAST(nsLineBox*,
GetProperty(nsLayoutAtoms::lineCursorProperty));
line_iterator cursor = mLines.begin(property);
nsRect cursorArea = cursor->GetCombinedArea();
while ((cursorArea.IsEmpty() || cursorArea.YMost() > y)
&& cursor != mLines.front()) {
cursor = cursor.prev();
cursorArea = cursor->GetCombinedArea();
}
while ((cursorArea.IsEmpty() || cursorArea.YMost() <= y)
&& cursor != mLines.back()) {
cursor = cursor.next();
cursorArea = cursor->GetCombinedArea();
}
if (cursor.get() != property) {
SetProperty(nsLayoutAtoms::lineCursorProperty,
cursor.get(), nsnull);
}
return cursor.get();
}
static inline void
GetFrameFromLine(const nsRect& aLineArea, const nsPoint& aTmp,
nsBlockFrame::line_iterator& aLine,
nsFramePaintLayer aWhichLayer, nsIFrame** aFrame) {
if (aLineArea.Contains(aTmp)) {
nsIFrame* kid = aLine->mFirstChild;
PRInt32 n = aLine->GetChildCount();
while (--n >= 0) {
nsIFrame *hit;
nsresult rv = kid->GetFrameForPoint(aTmp, aWhichLayer, &hit);
if (NS_SUCCEEDED(rv) && hit) {
*aFrame = hit;
}
kid = kid->GetNextSibling();
}
}
}
// Optimized function that uses line combined areas to skip lines
// we know can't contain the point
nsresult
nsBlockFrame::GetFrameForPointUsing(const nsPoint& aPoint,
nsIAtom* aList,
nsFramePaintLayer aWhichLayer,
PRBool aConsiderSelf,
nsIFrame** aFrame)
{
if (aList) {
return nsContainerFrame::GetFrameForPointUsing(aPoint,
aList, aWhichLayer, aConsiderSelf, aFrame);
}
PRBool inThisFrame = mRect.Contains(aPoint);
if (! ((mState & NS_FRAME_OUTSIDE_CHILDREN) || inThisFrame ) ) {
return NS_ERROR_FAILURE;
}
*aFrame = nsnull;
nsPoint tmp(aPoint.x - mRect.x, aPoint.y - mRect.y);
nsPoint originOffset;
nsIView *view = nsnull;
nsresult rv = GetOriginToViewOffset(originOffset, &view);
if (NS_SUCCEEDED(rv) && view)
tmp += originOffset;
nsLineBox* cursor = GetFirstLineContaining(tmp.y);
line_iterator line_end = end_lines();
if (cursor) {
// This is the fast path for large blocks
for (line_iterator line = mLines.begin(cursor);
line != line_end;
++line) {
nsRect lineArea = line->GetCombinedArea();
// Because we have a cursor, the combinedArea.ys are non-decreasing.
// Once we've passed tmp.y, we can never see it again.
if (!lineArea.IsEmpty()) {
if (lineArea.y > tmp.y) {
break;
}
GetFrameFromLine(lineArea, tmp, line, aWhichLayer, aFrame);
}
}
} else {
PRBool nonDecreasingYs = PR_TRUE;
PRInt32 lineCount = 0;
nscoord lastY = PR_INT32_MIN;
nscoord lastYMost = PR_INT32_MIN;
for (line_iterator line = mLines.begin();
line != line_end;
++line) {
nsRect lineArea = line->GetCombinedArea();
if (!lineArea.IsEmpty()) {
if (lineArea.y < lastY
|| lineArea.YMost() < lastYMost) {
nonDecreasingYs = PR_FALSE;
}
lastY = lineArea.y;
lastYMost = lineArea.YMost();
GetFrameFromLine(lineArea, tmp, line, aWhichLayer, aFrame);
}
lineCount++;
}
if (nonDecreasingYs && lineCount >= MIN_LINES_NEEDING_CURSOR) {
SetupLineCursor();
}
}
if (*aFrame) {
return NS_OK;
}
if ( inThisFrame && aConsiderSelf ) {
if (GetStyleVisibility()->IsVisible()) {
*aFrame = this;
return NS_OK;
}
}
return NS_ERROR_FAILURE;
}
NS_IMETHODIMP
nsBlockFrame::GetFrameForPoint(const nsPoint& aPoint,
nsFramePaintLayer aWhichLayer,
nsIFrame** aFrame)
{
nsresult rv;
switch (aWhichLayer) {
case NS_FRAME_PAINT_LAYER_FOREGROUND:
rv = GetFrameForPointUsing(aPoint, nsnull,
NS_FRAME_PAINT_LAYER_FOREGROUND, PR_FALSE,
aFrame);
if (NS_OK == rv) {
return NS_OK;
}
if (nsnull != mBullet) {
rv = GetFrameForPointUsing(aPoint, nsLayoutAtoms::bulletList,
NS_FRAME_PAINT_LAYER_FOREGROUND, PR_FALSE,
aFrame);
}
return rv;
break;
case NS_FRAME_PAINT_LAYER_FLOATS:
// we painted our floats before our children, and thus
// we should check floats within children first
rv = GetFrameForPointUsing(aPoint, nsnull,
NS_FRAME_PAINT_LAYER_FLOATS, PR_FALSE,
aFrame);
if (NS_OK == rv) {
return NS_OK;
}
if (mFloats.NotEmpty()) {
return GetFrameForPointUsing(aPoint, nsLayoutAtoms::floatList,
NS_FRAME_PAINT_LAYER_ALL, PR_FALSE,
aFrame);
} else {
return NS_ERROR_FAILURE;
}
break;
case NS_FRAME_PAINT_LAYER_BACKGROUND:
// we're a block, so PR_TRUE for consider self
return GetFrameForPointUsing(aPoint, nsnull,
NS_FRAME_PAINT_LAYER_BACKGROUND, PR_TRUE,
aFrame);
break;
}
// we shouldn't get here
NS_ASSERTION(PR_FALSE, "aWhichLayer was not understood");
return NS_ERROR_FAILURE;
}
NS_IMETHODIMP
nsBlockFrame::ReflowDirtyChild(nsIPresShell* aPresShell, nsIFrame* aChild)
{
#ifdef DEBUG
if (gNoisyReflow) {
IndentBy(stdout, gNoiseIndent);
ListTag(stdout);
printf(": ReflowDirtyChild (");
if (aChild)
nsFrame::ListTag(stdout, aChild);
else
printf("null");
printf(")\n");
}
AutoNoisyIndenter indent(gNoisyReflow);
#endif
if (aChild) {
// See if the child is absolutely positioned
if (aChild->GetStateBits() & NS_FRAME_OUT_OF_FLOW) {
const nsStyleDisplay* disp = aChild->GetStyleDisplay();
if (disp->IsAbsolutelyPositioned()) {
// Generate a reflow command to reflow our dirty absolutely
// positioned child frames.
// XXX Note that we don't currently try and coalesce the reflow commands,
// although we should. We can't use the NS_FRAME_HAS_DIRTY_CHILDREN
// flag, because that's used to indicate whether in-flow children are
// dirty...
nsresult rv = aPresShell->
AppendReflowCommand(this, eReflowType_ReflowDirty,
mAbsoluteContainer.GetChildListName());
#ifdef DEBUG
if (gNoisyReflow) {
IndentBy(stdout, gNoiseIndent);
printf("scheduled reflow command for absolutely positioned frame\n");
}
#endif
return rv;
}
}
if (aChild == mBullet && HaveOutsideBullet()) {
// The bullet lives in the first line, unless the first line has
// height 0 and there is a second line, in which case it lives
// in the second line.
line_iterator bulletLine = begin_lines();
if (bulletLine != end_lines() && bulletLine->mBounds.height == 0 &&
bulletLine != mLines.back()) {
bulletLine = bulletLine.next();
}
if (bulletLine != end_lines()) {
MarkLineDirty(bulletLine);
}
// otherwise we have an empty line list, and ReflowDirtyLines
// will handle reflowing the bullet.
} else {
// Mark the line containing the child frame dirty.
line_iterator fline = FindLineFor(aChild);
if (fline != end_lines())
MarkLineDirty(fline);
}
}
// Either generate a reflow command to reflow the dirty child or
// coalesce this reflow request with an existing reflow command
if (!(mState & NS_FRAME_HAS_DIRTY_CHILDREN)) {
// If this is the first dirty child,
// post a dirty children reflow command targeted at yourself
mState |= NS_FRAME_HAS_DIRTY_CHILDREN;
aPresShell->AppendReflowCommand(this, eReflowType_ReflowDirty, nsnull);
#ifdef DEBUG
if (gNoisyReflow) {
IndentBy(stdout, gNoiseIndent);
printf("scheduled reflow command targeted at self\n");
}
#endif
}
return NS_OK;
}
//////////////////////////////////////////////////////////////////////
// Start Debugging
#ifdef NS_DEBUG
static PRBool
InLineList(nsLineList& aLines, nsIFrame* aFrame)
{
for (nsLineList::iterator line = aLines.begin(), line_end = aLines.end();
line != line_end;
++line) {
nsIFrame* frame = line->mFirstChild;
PRInt32 n = line->GetChildCount();
while (--n >= 0) {
if (frame == aFrame) {
return PR_TRUE;
}
frame = frame->GetNextSibling();
}
}
return PR_FALSE;
}
static PRBool
InSiblingList(nsLineList& aLines, nsIFrame* aFrame)
{
if (! aLines.empty()) {
nsIFrame* frame = aLines.front()->mFirstChild;
while (frame) {
if (frame == aFrame) {
return PR_TRUE;
}
frame = frame->GetNextSibling();
}
}
return PR_FALSE;
}
PRBool
nsBlockFrame::IsChild(nsIFrame* aFrame)
{
// Continued out-of-flows don't satisfy InLineList(), continued out-of-flows
// and placeholders don't satisfy InSiblingList().
PRBool skipLineList = PR_FALSE;
PRBool skipSiblingList = PR_FALSE;
nsIFrame* prevInFlow = aFrame->GetPrevInFlow();
PRBool isPlaceholder = nsLayoutAtoms::placeholderFrame == aFrame->GetType();
if (prevInFlow) {
nsFrameState state = aFrame->GetStateBits();
skipLineList = (state & NS_FRAME_OUT_OF_FLOW);
skipSiblingList = isPlaceholder || (state & NS_FRAME_OUT_OF_FLOW);
}
if (isPlaceholder) {
nsFrameList* overflowPlaceholders = GetOverflowPlaceholders();
if (overflowPlaceholders && overflowPlaceholders->ContainsFrame(aFrame)) {
return PR_TRUE;
}
}
if (aFrame->GetParent() != (nsIFrame*)this) {
return PR_FALSE;
}
if ((skipLineList || InLineList(mLines, aFrame)) &&
(skipSiblingList || InSiblingList(mLines, aFrame))) {
return PR_TRUE;
}
nsLineList* overflowLines = GetOverflowLines();
if (overflowLines && (skipLineList || InLineList(*overflowLines, aFrame)) &&
(skipSiblingList || InSiblingList(*overflowLines, aFrame))) {
return PR_TRUE;
}
return PR_FALSE;
}
NS_IMETHODIMP
nsBlockFrame::VerifyTree() const
{
// XXX rewrite this
return NS_OK;
}
#endif
// End Debugging
//////////////////////////////////////////////////////////////////////
NS_IMETHODIMP
nsBlockFrame::Init(nsPresContext* aPresContext,
nsIContent* aContent,
nsIFrame* aParent,
nsStyleContext* aContext,
nsIFrame* aPrevInFlow)
{
if (aPrevInFlow) {
// Copy over the block/area frame type flags
nsBlockFrame* blockFrame = (nsBlockFrame*)aPrevInFlow;
SetFlags(blockFrame->mState & NS_BLOCK_FLAGS_MASK);
}
nsresult rv = nsBlockFrameSuper::Init(aPresContext, aContent, aParent,
aContext, aPrevInFlow);
if (IsBoxWrapped())
mState |= NS_BLOCK_SPACE_MGR;
return rv;
}
NS_IMETHODIMP
nsBlockFrame::SetInitialChildList(nsPresContext* aPresContext,
nsIAtom* aListName,
nsIFrame* aChildList)
{
nsresult rv = NS_OK;
if (mAbsoluteContainer.GetChildListName() == aListName) {
mAbsoluteContainer.SetInitialChildList(this, aPresContext, aListName, aChildList);
}
else if (nsLayoutAtoms::floatList == aListName) {
mFloats.SetFrames(aChildList);
}
else {
#ifdef DEBUG
// The only times a block that is an anonymous box is allowed to have a
// first-letter frame are when it's the block inside a non-anonymous cell,
// the block inside a fieldset, a scrolled content block, or a column
// content block. Also, a block that has a previous continuation can't
// have a first letter frame.
nsIAtom *pseudo = GetStyleContext()->GetPseudoType();
PRBool haveFirstLetterStyle =
!mPrevInFlow &&
(!pseudo ||
(pseudo == nsCSSAnonBoxes::cellContent &&
mParent->GetStyleContext()->GetPseudoType() == nsnull) ||
pseudo == nsCSSAnonBoxes::fieldsetContent ||
pseudo == nsCSSAnonBoxes::scrolledContent ||
pseudo == nsCSSAnonBoxes::columnContent) &&
nsRefPtr<nsStyleContext>(GetFirstLetterStyle(aPresContext)) != nsnull;
NS_ASSERTION(haveFirstLetterStyle ==
((mState & NS_BLOCK_HAS_FIRST_LETTER_STYLE) != 0),
"NS_BLOCK_HAS_FIRST_LETTER_STYLE state out of sync");
#endif
rv = AddFrames(aChildList, nsnull);
if (NS_FAILED(rv)) {
return rv;
}
// Create list bullet if this is a list-item. Note that this is done
// here so that RenumberLists will work (it needs the bullets to
// store the bullet numbers).
const nsStyleDisplay* styleDisplay = GetStyleDisplay();
if ((nsnull == mPrevInFlow) &&
(NS_STYLE_DISPLAY_LIST_ITEM == styleDisplay->mDisplay) &&
(nsnull == mBullet)) {
// Resolve style for the bullet frame
const nsStyleList* styleList = GetStyleList();
nsIAtom *pseudoElement;
switch (styleList->mListStyleType) {
case NS_STYLE_LIST_STYLE_DISC:
case NS_STYLE_LIST_STYLE_CIRCLE:
case NS_STYLE_LIST_STYLE_SQUARE:
pseudoElement = nsCSSPseudoElements::mozListBullet;
break;
default:
pseudoElement = nsCSSPseudoElements::mozListNumber;
break;
}
nsIPresShell *shell = aPresContext->PresShell();
nsRefPtr<nsStyleContext> kidSC = shell->StyleSet()->
ResolvePseudoStyleFor(mContent, pseudoElement, mStyleContext);
// Create bullet frame
nsBulletFrame* bullet = new (shell) nsBulletFrame;
if (nsnull == bullet) {
return NS_ERROR_OUT_OF_MEMORY;
}
bullet->Init(aPresContext, mContent, this, kidSC, nsnull);
// If the list bullet frame should be positioned inside then add
// it to the flow now.
if (NS_STYLE_LIST_STYLE_POSITION_INSIDE ==
styleList->mListStylePosition) {
AddFrames(bullet, nsnull);
mState &= ~NS_BLOCK_FRAME_HAS_OUTSIDE_BULLET;
}
else {
mState |= NS_BLOCK_FRAME_HAS_OUTSIDE_BULLET;
}
mBullet = bullet;
}
}
return NS_OK;
}
// static
PRBool
nsBlockFrame::FrameStartsCounterScope(nsIFrame* aFrame)
{
nsIContent* content = aFrame->GetContent();
if (!content || !content->IsContentOfType(nsIContent::eHTML))
return PR_FALSE;
nsINodeInfo *ni = content->GetNodeInfo();
return ni->Equals(nsHTMLAtoms::ol) ||
ni->Equals(nsHTMLAtoms::ul) ||
ni->Equals(nsHTMLAtoms::dir) ||
ni->Equals(nsHTMLAtoms::menu);
}
void
nsBlockFrame::RenumberLists(nsPresContext* aPresContext)
{
if (!FrameStartsCounterScope(this)) {
// If this frame doesn't start a counter scope then we don't need
// to renumber child list items.
return;
}
// Setup initial list ordinal value
// XXX Map html's start property to counter-reset style
PRInt32 ordinal = 1;
nsGenericHTMLElement *hc = nsGenericHTMLElement::FromContent(mContent);
if (hc) {
const nsAttrValue* attr = hc->GetParsedAttr(nsHTMLAtoms::start);
if (attr && attr->Type() == nsAttrValue::eInteger) {
ordinal = attr->GetIntegerValue();
}
}
// Get to first-in-flow
nsBlockFrame* block = (nsBlockFrame*) GetFirstInFlow();
RenumberListsInBlock(aPresContext, block, &ordinal, 0);
}
PRBool
nsBlockFrame::RenumberListsInBlock(nsPresContext* aPresContext,
nsBlockFrame* aBlockFrame,
PRInt32* aOrdinal,
PRInt32 aDepth)
{
PRBool renumberedABullet = PR_FALSE;
while (nsnull != aBlockFrame) {
// Examine each line in the block
for (line_iterator line = aBlockFrame->begin_lines(),
line_end = aBlockFrame->end_lines();
line != line_end;
++line) {
nsIFrame* kid = line->mFirstChild;
PRInt32 n = line->GetChildCount();
while (--n >= 0) {
PRBool kidRenumberedABullet = RenumberListsFor(aPresContext, kid, aOrdinal, aDepth);
if (kidRenumberedABullet) {
line->MarkDirty();
renumberedABullet = PR_TRUE;
}
kid = kid->GetNextSibling();
}
}
// Advance to the next continuation
aBlockFrame = NS_STATIC_CAST(nsBlockFrame*, aBlockFrame->GetNextInFlow());
}
return renumberedABullet;
}
PRBool
nsBlockFrame::RenumberListsFor(nsPresContext* aPresContext,
nsIFrame* aKid,
PRInt32* aOrdinal,
PRInt32 aDepth)
{
NS_PRECONDITION(aPresContext && aKid && aOrdinal, "null params are immoral!");
// add in a sanity check for absurdly deep frame trees. See bug 42138
if (MAX_DEPTH_FOR_LIST_RENUMBERING < aDepth)
return PR_FALSE;
PRBool kidRenumberedABullet = PR_FALSE;
// if the frame is a placeholder, then get the out of flow frame
nsIFrame* kid = nsPlaceholderFrame::GetRealFrameFor(aKid);
// drill down through any wrappers to the real frame
kid = kid->GetContentInsertionFrame();
if (!kid)
return PR_FALSE;
// If the frame is a list-item and the frame implements our
// block frame API then get its bullet and set the list item
// ordinal.
const nsStyleDisplay* display = kid->GetStyleDisplay();
if (NS_STYLE_DISPLAY_LIST_ITEM == display->mDisplay) {
// Make certain that the frame is a block frame in case
// something foreign has crept in.
nsBlockFrame* listItem;
nsresult rv = kid->QueryInterface(kBlockFrameCID, (void**)&listItem);
if (NS_SUCCEEDED(rv)) {
if (nsnull != listItem->mBullet) {
PRBool changed;
*aOrdinal = listItem->mBullet->SetListItemOrdinal(*aOrdinal,
&changed);
if (changed) {
kidRenumberedABullet = PR_TRUE;
// Invalidate the bullet content area since it may look different now
nsRect damageRect(nsPoint(0, 0), listItem->mBullet->GetSize());
listItem->mBullet->Invalidate(damageRect);
}
}
// XXX temporary? if the list-item has child list-items they
// should be numbered too; especially since the list-item is
// itself (ASSUMED!) not to be a counter-resetter.
PRBool meToo = RenumberListsInBlock(aPresContext, listItem, aOrdinal, aDepth + 1);
if (meToo) {
kidRenumberedABullet = PR_TRUE;
}
}
}
else if (NS_STYLE_DISPLAY_BLOCK == display->mDisplay) {
if (FrameStartsCounterScope(kid)) {
// Don't bother recursing into a block frame that is a new
// counter scope. Any list-items in there will be handled by
// it.
}
else {
// If the display=block element is a block frame then go ahead
// and recurse into it, as it might have child list-items.
nsBlockFrame* kidBlock;
nsresult rv = kid->QueryInterface(kBlockFrameCID, (void**) &kidBlock);
if (NS_SUCCEEDED(rv)) {
kidRenumberedABullet = RenumberListsInBlock(aPresContext, kidBlock, aOrdinal, aDepth + 1);
}
}
}
return kidRenumberedABullet;
}
void
nsBlockFrame::ReflowBullet(nsBlockReflowState& aState,
nsHTMLReflowMetrics& aMetrics)
{
// Reflow the bullet now
nsSize availSize;
availSize.width = NS_UNCONSTRAINEDSIZE;
availSize.height = NS_UNCONSTRAINEDSIZE;
// Get the reason right.
// XXXwaterson Should this look just like the logic in
// nsBlockReflowContext::ReflowBlock and nsLineLayout::ReflowFrame?
const nsHTMLReflowState &rs = aState.mReflowState;
nsReflowReason reason = rs.reason;
if (reason == eReflowReason_Incremental) {
if (! rs.path->HasChild(mBullet)) {
// An incremental reflow not explicitly destined to (or through)
// the child should be treated as a resize...
reason = eReflowReason_Resize;
}
// ...unless its an incremental `style changed' reflow targeted at
// the block, in which case, we propagate that to its children.
nsHTMLReflowCommand *command = rs.path->mReflowCommand;
if (command) {
if (command->Type() == eReflowType_StyleChanged)
reason = eReflowReason_StyleChange;
}
}
nsHTMLReflowState reflowState(aState.mPresContext, rs,
mBullet, availSize, reason);
nsReflowStatus status;
mBullet->WillReflow(aState.mPresContext);
mBullet->Reflow(aState.mPresContext, aMetrics, reflowState, status);
// Place the bullet now; use its right margin to distance it
// from the rest of the frames in the line
nscoord x =
#ifdef IBMBIDI
(rs.availableWidth != NS_UNCONSTRAINEDSIZE &&
NS_STYLE_DIRECTION_RTL == GetStyleVisibility()->mDirection)
// According to the CSS2 spec, section 12.6.1, outside marker box
// is distanced from the associated principal box's border edge.
// |rs.availableWidth| reflects exactly a border edge: it includes
// border, padding, and content area, without margins.
? rs.availableWidth + reflowState.mComputedMargin.left :
#endif
- reflowState.mComputedMargin.right - aMetrics.width;
// Approximate the bullets position; vertical alignment will provide
// the final vertical location.
const nsMargin& bp = aState.BorderPadding();
nscoord y = bp.top;
mBullet->SetRect(nsRect(x, y, aMetrics.width, aMetrics.height));
mBullet->DidReflow(aState.mPresContext, &aState.mReflowState, NS_FRAME_REFLOW_FINISHED);
}
// This is used to scan frames for any float placeholders, add their
// floats to the list represented by aHead and aTail, and remove the
// floats from whatever list they might be in. We only search the
// inline descendants. The floats must be children of 'this'.
void nsBlockFrame::CollectFloats(nsIFrame* aFrame, nsFrameList& aList, nsIFrame** aTail,
PRBool aFromOverflow, PRBool aCollectSiblings) {
while (aFrame) {
// Don't descend into float containing blocks.
if (!aFrame->IsFloatContainingBlock()) {
nsIFrame *outOfFlowFrame = nsLayoutUtils::GetFloatFromPlaceholder(aFrame);
if (outOfFlowFrame) {
// Make sure that its parent is us. Otherwise we don't want
// to mess around with it because it belongs to someone
// else. I think this could happen if the overflow lines
// contain a block descendant which owns its own floats.
NS_ASSERTION(outOfFlowFrame->GetParent() == this,
"Out of flow frame doesn't have the expected parent");
if (aFromOverflow) {
nsAutoOOFFrameList oofs(this);
oofs.mList.RemoveFrame(outOfFlowFrame);
} else {
mFloats.RemoveFrame(outOfFlowFrame);
}
aList.InsertFrame(nsnull, *aTail, outOfFlowFrame);
*aTail = outOfFlowFrame;
}
CollectFloats(aFrame->GetFirstChild(nsnull), aList, aTail, aFromOverflow,
PR_TRUE);
}
if (!aCollectSiblings)
break;
aFrame = aFrame->GetNextSibling();
}
}
void
nsBlockFrame::CheckFloats(nsBlockReflowState& aState)
{
#ifdef DEBUG
// Check that the float list is what we would have built
nsAutoVoidArray lineFloats;
for (line_iterator line = begin_lines(), line_end = end_lines();
line != line_end; ++line) {
if (line->HasFloats()) {
nsFloatCache* fc = line->GetFirstFloat();
while (fc) {
nsIFrame* floatFrame = fc->mPlaceholder->GetOutOfFlowFrame();
lineFloats.AppendElement(floatFrame);
fc = fc->Next();
}
}
}
nsAutoVoidArray storedFloats;
PRBool equal = PR_TRUE;
PRInt32 i = 0;
for (nsIFrame* f = mFloats.FirstChild(); f; f = f->GetNextSibling()) {
storedFloats.AppendElement(f);
if (i < lineFloats.Count() && lineFloats.ElementAt(i) != f) {
equal = PR_FALSE;
}
++i;
}
if (!equal || lineFloats.Count() != storedFloats.Count()) {
NS_WARNING("nsBlockFrame::CheckFloats: Explicit float list is out of sync with float cache");
#if defined(DEBUG_roc)
nsIFrameDebug::RootFrameList(GetPresContext(), stdout, 0);
for (i = 0; i < lineFloats.Count(); ++i) {
printf("Line float: %p\n", lineFloats.ElementAt(i));
}
for (i = 0; i < storedFloats.Count(); ++i) {
printf("Stored float: %p\n", storedFloats.ElementAt(i));
}
#endif
}
#endif
nsFrameList oofs = GetOverflowOutOfFlows();
if (oofs.NotEmpty()) {
// Floats that were pushed should be removed from our space
// manager. Otherwise the space manager's YMost or XMost might
// be larger than necessary, causing this block to get an
// incorrect desired height (or width). Some of these floats
// may not actually have been added to the space manager because
// they weren't reflowed before being pushed; that's OK,
// RemoveRegions will ignore them. It is safe to do this here
// because we know from here on the space manager will only be
// used for its XMost and YMost, not to place new floats and
// lines.
aState.mSpaceManager->RemoveTrailingRegions(oofs.FirstChild());
}
}
NS_IMETHODIMP
nsBlockFrame::SetParent(const nsIFrame* aParent)
{
nsresult rv = nsBlockFrameSuper::SetParent(aParent);
if (IsBoxWrapped())
mState |= NS_BLOCK_SPACE_MGR;
// XXX should we clear NS_BLOCK_SPACE_MGR if we were the child of a box
// but no longer are?
return rv;
}
// XXX keep the text-run data in the first-in-flow of the block
#ifdef DEBUG
void
nsBlockFrame::VerifyLines(PRBool aFinalCheckOK)
{
if (!gVerifyLines) {
return;
}
if (mLines.empty()) {
return;
}
// Add up the counts on each line. Also validate that IsFirstLine is
// set properly.
PRInt32 count = 0;
PRBool seenBlock = PR_FALSE;
line_iterator line, line_end;
for (line = begin_lines(), line_end = end_lines();
line != line_end;
++line) {
if (aFinalCheckOK) {
NS_ABORT_IF_FALSE(line->GetChildCount(), "empty line");
if (line->IsBlock()) {
seenBlock = PR_TRUE;
}
if (line->IsBlock()) {
NS_ASSERTION(1 == line->GetChildCount(), "bad first line");
}
}
count += line->GetChildCount();
}
// Then count the frames
PRInt32 frameCount = 0;
nsIFrame* frame = mLines.front()->mFirstChild;
while (frame) {
frameCount++;
frame = frame->GetNextSibling();
}
NS_ASSERTION(count == frameCount, "bad line list");
// Next: test that each line has right number of frames on it
for (line = begin_lines(), line_end = end_lines();
line != line_end;
) {
count = line->GetChildCount();
frame = line->mFirstChild;
while (--count >= 0) {
frame = frame->GetNextSibling();
}
++line;
if ((line != line_end) && (0 != line->GetChildCount())) {
NS_ASSERTION(frame == line->mFirstChild, "bad line list");
}
}
}
// Its possible that a frame can have some frames on an overflow
// list. But its never possible for multiple frames to have overflow
// lists. Check that this fact is actually true.
void
nsBlockFrame::VerifyOverflowSituation()
{
nsBlockFrame* flow = (nsBlockFrame*) GetFirstInFlow();
while (nsnull != flow) {
nsLineList* overflowLines = GetOverflowLines();
if (nsnull != overflowLines) {
NS_ASSERTION(! overflowLines->empty(), "should not be empty if present");
NS_ASSERTION(overflowLines->front()->mFirstChild, "bad overflow list");
}
flow = (nsBlockFrame*) flow->mNextInFlow;
}
}
PRInt32
nsBlockFrame::GetDepth() const
{
PRInt32 depth = 0;
nsIFrame* parent = mParent;
while (parent) {
parent = parent->GetParent();
depth++;
}
return depth;
}
#endif
Reference in New Issue Copy Permalink