RetroZilla/layout/generic/nsHTMLReflowMetrics.h

241 lines
7.7 KiB
C
Raw Normal View History

2015-10-21 05:03:22 +02:00
/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is mozilla.org code.
*
* The Initial Developer of the Original Code is
* Netscape Communications Corporation.
* Portions created by the Initial Developer are Copyright (C) 1998
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
*
* Alternatively, the contents of this file may be used under the terms of
* either of the GNU General Public License Version 2 or later (the "GPL"),
* or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
#ifndef nsHTMLReflowMetrics_h___
#define nsHTMLReflowMetrics_h___
#include <stdio.h>
#include "nsISupports.h"
#include "nsMargin.h"
#include "nsRect.h"
// for MOZ_MATHML
#include "nsIRenderingContext.h" //to get struct nsBoundingMetrics
//----------------------------------------------------------------------
// Option flags
#define NS_REFLOW_CALC_MAX_WIDTH 0x0001
#ifdef MOZ_MATHML
#define NS_REFLOW_CALC_BOUNDING_METRICS 0x0002
#endif
/**
* An nsCollapsingMargin represents a vertical collapsing margin between
* blocks as described in section 8.3.1 of CSS2,
* <URL: http://www.w3.org/TR/REC-CSS2/box.html#collapsing-margins >.
*
* All adjacent vertical margins collapse, and the resulting margin is
* the sum of the largest positive margin included and the smallest (most
* negative) negative margin included.
*/
struct nsCollapsingMargin {
private:
nscoord mMostPos; // the largest positive margin included
nscoord mMostNeg; // the smallest negative margin included
public:
nsCollapsingMargin()
: mMostPos(0),
mMostNeg(0)
{
}
nsCollapsingMargin(const nsCollapsingMargin& aOther)
: mMostPos(aOther.mMostPos),
mMostNeg(aOther.mMostNeg)
{
}
PRBool operator==(const nsCollapsingMargin& aOther)
{
return mMostPos == aOther.mMostPos &&
mMostNeg == aOther.mMostNeg;
}
PRBool operator!=(const nsCollapsingMargin& aOther)
{
return !(*this == aOther);
}
nsCollapsingMargin& operator=(const nsCollapsingMargin& aOther)
{
mMostPos = aOther.mMostPos;
mMostNeg = aOther.mMostNeg;
return *this;
}
void Include(nscoord aCoord)
{
if (aCoord > mMostPos)
mMostPos = aCoord;
else if (aCoord < mMostNeg)
mMostNeg = aCoord;
}
void Include(const nsCollapsingMargin& aOther)
{
if (aOther.mMostPos > mMostPos)
mMostPos = aOther.mMostPos;
if (aOther.mMostNeg < mMostNeg)
mMostNeg = aOther.mMostNeg;
}
void Zero()
{
mMostPos = 0;
mMostNeg = 0;
}
PRBool IsZero() const
{
return (mMostPos == 0) && (mMostNeg == 0);
}
nscoord get() const
{
return mMostPos + mMostNeg;
}
};
/**
* Reflow metrics used to return the frame's desired size and alignment
* information.
*
* @see #Reflow()
*/
struct nsHTMLReflowMetrics {
nscoord width, height; // [OUT] desired width and height
nscoord ascent, descent; // [OUT] ascent and descent information
nscoord mMaxElementWidth; // [OUT]
// Used for incremental reflow. If the NS_REFLOW_CALC_MAX_WIDTH flag is set,
// then the caller is requesting that you update and return your maximum width
nscoord mMaximumWidth; // [OUT]
#ifdef MOZ_MATHML
// Metrics that _exactly_ enclose the text to allow precise MathML placements.
// If the NS_REFLOW_CALC_BOUNDING_METRICS flag is set, then the caller is
// requesting that you also compute additional details about your inner
// bounding box and italic correction. For example, the bounding box of
// msup is the smallest rectangle that _exactly_ encloses both the text
// of the base and the text of the superscript.
nsBoundingMetrics mBoundingMetrics; // [OUT]
#endif
// Carried out bottom margin values. This is the collapsed
// (generational) bottom margin value.
nsCollapsingMargin mCarriedOutBottomMargin;
// For frames that have content that overflow their content area
// (NS_FRAME_OUTSIDE_CHILDREN) this rectangle represents the total area
// of the frame including visible overflow, i.e., don't include overflowing
// content that is hidden.
// The rect is in the local coordinate space of the frame, and should be at
// least as big as the desired size. If there is no content that overflows,
// then the overflow area is identical to the desired size and should be
// {0, 0, mWidth, mHeight}.
nsRect mOverflowArea;
PRUint32 mFlags;
// used by tables to optimize common cases
PRPackedBool mNothingChanged;
// Should we compute mMaxElementWidth?
PRPackedBool mComputeMEW;
nsHTMLReflowMetrics(PRBool aComputeMEW, PRUint32 aFlags = 0) {
mComputeMEW = aComputeMEW;
mMaxElementWidth = 0;
mMaximumWidth = 0;
mFlags = aFlags;
mOverflowArea.x = 0;
mOverflowArea.y = 0;
mOverflowArea.width = 0;
mOverflowArea.height = 0;
mNothingChanged = PR_FALSE;
#ifdef MOZ_MATHML
mBoundingMetrics.Clear();
#endif
// XXX These are OUT parameters and so they shouldn't have to be
// initialized, but there are some bad frame classes that aren't
// properly setting them when returning from Reflow()...
width = height = 0;
ascent = descent = 0;
}
/**
* set the maxElementWidth to the desired width. If the frame has a percent
* width specification it can be shrinked to 0 if the containing frame shrinks
* so we need to report 0 otherwise the incr. reflow will fail
* @param aWidthUnit - the width unit from the corresponding reflowstate
*/
void SetMEWToActualWidth(nsStyleUnit aWidthUnit) {
if (aWidthUnit != eStyleUnit_Percent) {
mMaxElementWidth = width;
} else {
mMaxElementWidth = 0;
}
}
nsHTMLReflowMetrics& operator=(const nsHTMLReflowMetrics& aOther)
{
mMaxElementWidth = aOther.mMaxElementWidth;
mMaximumWidth = aOther.mMaximumWidth;
mFlags = aOther.mFlags;
mCarriedOutBottomMargin = aOther.mCarriedOutBottomMargin;
mOverflowArea.x = aOther.mOverflowArea.x;
mOverflowArea.y = aOther.mOverflowArea.y;
mOverflowArea.width = aOther.mOverflowArea.width;
mOverflowArea.height = aOther.mOverflowArea.height;
mNothingChanged = aOther.mNothingChanged;
#ifdef MOZ_MATHML
mBoundingMetrics = aOther.mBoundingMetrics;
#endif
width = aOther.width;
height = aOther.height;
ascent = aOther.ascent;
descent = aOther.descent;
return *this;
}
};
#endif /* nsHTMLReflowMetrics_h___ */