RetroZilla/xpinstall/wizard/os2/builder/build.pl

251 lines
7.0 KiB
Perl
Raw Normal View History

2015-10-21 05:03:22 +02:00
#!c:\perl\bin\perl
#
# ***** BEGIN LICENSE BLOCK *****
# Version: MPL 1.1/GPL 2.0/LGPL 2.1
#
# The contents of this file are subject to the Mozilla Public License Version
# 1.1 (the "License"); you may not use this file except in compliance with
# the License. You may obtain a copy of the License at
# http://www.mozilla.org/MPL/
#
# Software distributed under the License is distributed on an "AS IS" basis,
# WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
# for the specific language governing rights and limitations under the
# License.
#
# The Original Code is Mozilla Communicator client code, released
# March 31, 1998.
#
# The Initial Developer of the Original Code is
# Netscape Communications Corporation.
# Portions created by the Initial Developer are Copyright (C) 1999
# the Initial Developer. All Rights Reserved.
#
# Contributor(s):
# Sean Su <ssu@netscape.com>
#
# Alternatively, the contents of this file may be used under the terms of
# either of the GNU General Public License Version 2 or later (the "GPL"),
# or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
# in which case the provisions of the GPL or the LGPL are applicable instead
# of those above. If you wish to allow use of your version of this file only
# under the terms of either the GPL or the LGPL, and not to allow others to
# use your version of this file under the terms of the MPL, indicate your
# decision by deleting the provisions above and replace them with the notice
# and other provisions required by the GPL or the LGPL. If you do not delete
# the provisions above, a recipient may use your version of this file under
# the terms of any one of the MPL, the GPL or the LGPL.
#
# ***** END LICENSE BLOCK *****
#
# Purpose:
# To build the mozilla self-extracting installer and its corresponding .xpi files
# given a mozilla build on a local system.
#
# Requirements:
# 1. perl needs to be installed correctly on the build system because cwd.pm is used.
# 2. mozilla\xpinstall\wizard\os2 needs to be built.
#
if($ENV{MOZ_SRC} eq "")
{
print "Error: MOZ_SRC not set!";
exit(1);
}
if($ENV{MOZ_OBJDIR} eq "")
{
print "Error: MOZ_OBJDIR not set!";
exit(1);
}
$inXpiURL = "";
$inRedirIniURL = "";
ParseArgv(@ARGV);
if($inXpiURL eq "")
{
# archive url not supplied, set it to default values
$inXpiURL = "ftp://not.supplied.invalid";
}
if($inRedirIniURL eq "")
{
# redirect url not supplied, set it to default value.
$inRedirIniURL = $inXpiURL;
}
$DEPTH = "$ENV{MOZ_SRC}/mozilla";
$cwdBuilder = "$DEPTH/xpinstall/wizard/os2/builder";
$cwdDist = GetCwd("dist", $DEPTH, $ENV{MOZ_OBJDIR}, $cwdBuilder);
$cwdInstall = GetCwd("install", $DEPTH, $ENV{MOZ_OBJDIR}, $cwdBuilder);
$cwdPackager = GetCwd("packager", $DEPTH, $ENV{MOZ_OBJDIR}, $cwdBuilder);
$cwdConfig = GetCwd("config", $DEPTH, $ENV{MOZ_OBJDIR}, $cwdBuilder);
#need a better way to get version from build
$verPartial = "1.2b.0.";
#get date from build_number file
open(FILENEW, "<$cwdConfig/build_number");
my $dateversion = <FILENEW>;
close(FILENEW);
$ver = $verPartial . $dateversion;
# Check for existence of mozilla.exe
$fileMozilla = "$DEPTH/$ENV{MOZ_OBJDIR}/dist/bin/mozilla.exe";
if(!(-e "$fileMozilla"))
{
print "file not found: $fileMozilla\n";
exit(1);
}
if(-d "$DEPTH/stage")
{
system("perl $cwdPackager/os2/rdir.pl $DEPTH/stage");
}
# The destination cannot be a sub directory of the source.
# pkgcp.pl will get very unhappy.
mkdir("$DEPTH/stage", 0775);
system("perl $cwdPackager/pkgcp.pl -s $cwdDist -d $DEPTH/stage -f $cwdPackager/packages-os2 -o unix -v");
system("perl $cwdPackager/xptlink.pl -s $cwdDist -d $DEPTH/stage -v");
chdir("$cwdPackager/os2");
if(system("perl makeall.pl $ver $DEPTH/stage $cwdDist/install -aurl $inXpiURL -rurl $inRedirIniURL"))
{
print "\n Error: perl makeall.pl $ver $DEPTH/stage $cwdDist/install $inXpiURL $inRedirIniURL\n";
exit(1);
}
chdir($cwdBuilder);
# Copy the .xpi files to the same directory as setup.exe.
# This is so that setup.exe can find the .xpi files
# in the same directory and use them.
#
# Mozilla-os2-installer.exe (a self extracting file) will use the .xpi
# files from its current directory as well, but it is not a requirement
# that they exist because it already contains the .xpi files within itself.
if(system("cp $cwdDist/install/xpi/*.* $cwdDist/install"))
{
print "Error: cp $cwdDist/install/xpi/*.* $cwdDist/install\n";
exit(1);
}
print "\n";
print "**\n";
print "*\n";
print "* A self-extracting installer has been built and delivered:\n";
print "*\n";
print "* $cwdDist/install/mozilla-os2-installer.exe\n";
print "*\n";
print "**\n";
print "\n";
exit(0);
sub PrintUsage
{
die "usage: $0 [options]
options available are:
-h - this usage.
-aurl - ftp or http url for where the archives (.xpi, exe, .zip, etx...) are.
ie: ftp://my.ftp.com/mysoftware/version1.0/xpi
-rurl - ftp or http url for where the redirect.ini file is located at.
ie: ftp://my.ftp.com/mysoftware/version1.0
This url can be the same as the archive url.
If -rurl is not supplied, it will be assumed that the redirect.ini
file is at -arul.
\n";
}
sub ParseArgv
{
my(@myArgv) = @_;
my($counter);
for($counter = 0; $counter <= $#myArgv; $counter++)
{
if($myArgv[$counter] =~ /^[-,\/]h$/i)
{
PrintUsage();
}
elsif($myArgv[$counter] =~ /^[-,\/]aurl$/i)
{
if($#myArgv >= ($counter + 1))
{
++$counter;
$inXpiURL = $myArgv[$counter];
$inRedirIniURL = $inXpiURL;
}
}
elsif($myArgv[$counter] =~ /^[-,\/]rurl$/i)
{
if($#myArgv >= ($counter + 1))
{
++$counter;
$inRedirIniURL = $myArgv[$counter];
}
}
}
}
sub GetCwd
{
my($whichPath, $depthPath, $objdirName, $returnCwd) = @_;
my($distCwd);
my($distPath);
if($whichPath eq "dist")
{
# verify the existance of path
if(!(-e "$depthPath/$objdirName/dist"))
{
print "path not found: $depthPath/$objDirName/dist\n";
exit(1);
}
$distPath = "$depthPath/$objdirName/dist";
}
elsif($whichPath eq "install")
{
# verify the existance of path
if(!(-e "$depthPath/$objdirName/dist/install"))
{
print "path not found: $depthPath/$objdirName/dist/install\n";
exit(1);
}
$distPath = "$depthPath/$objdirname/install";
}
elsif($whichPath eq "packager")
{
# verify the existance of path
if(!(-e "$depthPath/xpinstall/packager"))
{
print "path not found: $depthPath/xpinstall/packager\n";
exit(1);
}
$distPath = "$depthPath/xpinstall/packager";
}
elsif($whichPath eq "config")
{
# verify the existance of path
if(!(-e "$depthPath/$objdirName/config"))
{
print "path not found: $depthPath/$objdirName/config\n";
exit(1);
}
$distPath = "$depthPath/$objdirName/config";
}
return($distPath);
}