RetroZilla/security/nss/lib/pk11wrap/pk11util.c

1441 lines
40 KiB
C
Raw Normal View History

2015-10-21 05:03:22 +02:00
/* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is the Netscape security libraries.
*
* The Initial Developer of the Original Code is
* Netscape Communications Corporation.
* Portions created by the Initial Developer are Copyright (C) 1994-2000
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
*
* Alternatively, the contents of this file may be used under the terms of
* either the GNU General Public License Version 2 or later (the "GPL"), or
* the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
/*
* Initialize the PCKS 11 subsystem
*/
#include "seccomon.h"
#include "secmod.h"
#include "nssilock.h"
#include "secmodi.h"
#include "secmodti.h"
#include "pk11func.h"
#include "pki3hack.h"
#include "secerr.h"
#include "dev.h"
#include "pkcs11ni.h"
/* these are for displaying error messages */
static SECMODModuleList *modules = NULL;
static SECMODModuleList *modulesDB = NULL;
static SECMODModuleList *modulesUnload = NULL;
static SECMODModule *internalModule = NULL;
static SECMODModule *defaultDBModule = NULL;
static SECMODModule *pendingModule = NULL;
static SECMODListLock *moduleLock = NULL;
int secmod_PrivateModuleCount = 0;
extern PK11DefaultArrayEntry PK11_DefaultArray[];
extern int num_pk11_default_mechanisms;
void
SECMOD_Init()
{
/* don't initialize twice */
if (moduleLock) return;
moduleLock = SECMOD_NewListLock();
PK11_InitSlotLists();
}
SECStatus
SECMOD_Shutdown()
{
/* destroy the lock */
if (moduleLock) {
SECMOD_DestroyListLock(moduleLock);
moduleLock = NULL;
}
/* free the internal module */
if (internalModule) {
SECMOD_DestroyModule(internalModule);
internalModule = NULL;
}
/* free the default database module */
if (defaultDBModule) {
SECMOD_DestroyModule(defaultDBModule);
defaultDBModule = NULL;
}
/* destroy the list */
if (modules) {
SECMOD_DestroyModuleList(modules);
modules = NULL;
}
if (modulesDB) {
SECMOD_DestroyModuleList(modulesDB);
modulesDB = NULL;
}
if (modulesUnload) {
SECMOD_DestroyModuleList(modulesUnload);
modulesUnload = NULL;
}
/* make all the slots and the lists go away */
PK11_DestroySlotLists();
nss_DumpModuleLog();
#ifdef DEBUG
if (PR_GetEnv("NSS_STRICT_SHUTDOWN")) {
PORT_Assert(secmod_PrivateModuleCount == 0);
}
#endif
if (secmod_PrivateModuleCount) {
PORT_SetError(SEC_ERROR_BUSY);
return SECFailure;
}
return SECSuccess;
}
/*
* retrieve the internal module
*/
SECMODModule *
SECMOD_GetInternalModule(void)
{
return internalModule;
}
SECStatus
secmod_AddModuleToList(SECMODModuleList **moduleList,SECMODModule *newModule)
{
SECMODModuleList *mlp, *newListElement, *last = NULL;
newListElement = SECMOD_NewModuleListElement();
if (newListElement == NULL) {
return SECFailure;
}
newListElement->module = SECMOD_ReferenceModule(newModule);
SECMOD_GetWriteLock(moduleLock);
/* Added it to the end (This is very inefficient, but Adding a module
* on the fly should happen maybe 2-3 times through the life this program
* on a given computer, and this list should be *SHORT*. */
for(mlp = *moduleList; mlp != NULL; mlp = mlp->next) {
last = mlp;
}
if (last == NULL) {
*moduleList = newListElement;
} else {
SECMOD_AddList(last,newListElement,NULL);
}
SECMOD_ReleaseWriteLock(moduleLock);
return SECSuccess;
}
SECStatus
SECMOD_AddModuleToList(SECMODModule *newModule)
{
if (newModule->internal && !internalModule) {
internalModule = SECMOD_ReferenceModule(newModule);
}
return secmod_AddModuleToList(&modules,newModule);
}
SECStatus
SECMOD_AddModuleToDBOnlyList(SECMODModule *newModule)
{
if (defaultDBModule == NULL) {
defaultDBModule = SECMOD_ReferenceModule(newModule);
}
return secmod_AddModuleToList(&modulesDB,newModule);
}
SECStatus
SECMOD_AddModuleToUnloadList(SECMODModule *newModule)
{
return secmod_AddModuleToList(&modulesUnload,newModule);
}
/*
* get the list of PKCS11 modules that are available.
*/
SECMODModuleList * SECMOD_GetDefaultModuleList() { return modules; }
SECMODModuleList *SECMOD_GetDeadModuleList() { return modulesUnload; }
SECMODModuleList *SECMOD_GetDBModuleList() { return modulesDB; }
/*
* This lock protects the global module lists.
* it also protects changes to the slot array (module->slots[]) and slot count
* (module->slotCount) in each module. It is a read/write lock with multiple
* readers or one writer. Writes are uncommon.
* Because of legacy considerations protection of the slot array and count is
* only necessary in applications if the application calls
* SECMOD_UpdateSlotList() or SECMOD_WaitForAnyTokenEvent(), though all new
* applications are encouraged to acquire this lock when reading the
* slot array information directly.
*/
SECMODListLock *SECMOD_GetDefaultModuleListLock() { return moduleLock; }
/*
* find a module by name, and add a reference to it.
* return that module.
*/
SECMODModule *
SECMOD_FindModule(const char *name)
{
SECMODModuleList *mlp;
SECMODModule *module = NULL;
SECMOD_GetReadLock(moduleLock);
for(mlp = modules; mlp != NULL; mlp = mlp->next) {
if (PORT_Strcmp(name,mlp->module->commonName) == 0) {
module = mlp->module;
SECMOD_ReferenceModule(module);
break;
}
}
if (module) {
goto found;
}
for(mlp = modulesUnload; mlp != NULL; mlp = mlp->next) {
if (PORT_Strcmp(name,mlp->module->commonName) == 0) {
module = mlp->module;
SECMOD_ReferenceModule(module);
break;
}
}
found:
SECMOD_ReleaseReadLock(moduleLock);
return module;
}
/*
* find a module by ID, and add a reference to it.
* return that module.
*/
SECMODModule *
SECMOD_FindModuleByID(SECMODModuleID id)
{
SECMODModuleList *mlp;
SECMODModule *module = NULL;
SECMOD_GetReadLock(moduleLock);
for(mlp = modules; mlp != NULL; mlp = mlp->next) {
if (id == mlp->module->moduleID) {
module = mlp->module;
SECMOD_ReferenceModule(module);
break;
}
}
SECMOD_ReleaseReadLock(moduleLock);
if (module == NULL) {
PORT_SetError(SEC_ERROR_NO_MODULE);
}
return module;
}
/*
* Find the Slot based on ID and the module.
*/
PK11SlotInfo *
SECMOD_FindSlotByID(SECMODModule *module, CK_SLOT_ID slotID)
{
int i;
PK11SlotInfo *slot = NULL;
SECMOD_GetReadLock(moduleLock);
for (i=0; i < module->slotCount; i++) {
PK11SlotInfo *cSlot = module->slots[i];
if (cSlot->slotID == slotID) {
slot = PK11_ReferenceSlot(cSlot);
break;
}
}
SECMOD_ReleaseReadLock(moduleLock);
if (slot == NULL) {
PORT_SetError(SEC_ERROR_NO_SLOT_SELECTED);
}
return slot;
}
/*
* lookup the Slot module based on it's module ID and slot ID.
*/
PK11SlotInfo *
SECMOD_LookupSlot(SECMODModuleID moduleID,CK_SLOT_ID slotID)
{
SECMODModule *module;
PK11SlotInfo *slot;
module = SECMOD_FindModuleByID(moduleID);
if (module == NULL) return NULL;
slot = SECMOD_FindSlotByID(module, slotID);
SECMOD_DestroyModule(module);
return slot;
}
/*
* find a module by name or module pointer and delete it off the module list.
* optionally remove it from secmod.db.
*/
SECStatus
SECMOD_DeleteModuleEx(const char *name, SECMODModule *mod,
int *type, PRBool permdb)
{
SECMODModuleList *mlp;
SECMODModuleList **mlpp;
SECStatus rv = SECFailure;
*type = SECMOD_EXTERNAL;
SECMOD_GetWriteLock(moduleLock);
for (mlpp = &modules,mlp = modules;
mlp != NULL; mlpp = &mlp->next, mlp = *mlpp) {
if ((name && (PORT_Strcmp(name,mlp->module->commonName) == 0)) ||
mod == mlp->module) {
/* don't delete the internal module */
if (!mlp->module->internal) {
SECMOD_RemoveList(mlpp,mlp);
/* delete it after we release the lock */
rv = STAN_RemoveModuleFromDefaultTrustDomain(mlp->module);
} else if (mlp->module->isFIPS) {
*type = SECMOD_FIPS;
} else {
*type = SECMOD_INTERNAL;
}
break;
}
}
if (mlp) {
goto found;
}
/* not on the internal list, check the unload list */
for (mlpp = &modulesUnload,mlp = modulesUnload;
mlp != NULL; mlpp = &mlp->next, mlp = *mlpp) {
if ((name && (PORT_Strcmp(name,mlp->module->commonName) == 0)) ||
mod == mlp->module) {
/* don't delete the internal module */
if (!mlp->module->internal) {
SECMOD_RemoveList(mlpp,mlp);
rv = SECSuccess;
} else if (mlp->module->isFIPS) {
*type = SECMOD_FIPS;
} else {
*type = SECMOD_INTERNAL;
}
break;
}
}
found:
SECMOD_ReleaseWriteLock(moduleLock);
if (rv == SECSuccess) {
if (permdb) {
SECMOD_DeletePermDB(mlp->module);
}
SECMOD_DestroyModuleListElement(mlp);
}
return rv;
}
/*
* find a module by name and delete it off the module list
*/
SECStatus
SECMOD_DeleteModule(const char *name, int *type)
{
return SECMOD_DeleteModuleEx(name, NULL, type, PR_TRUE);
}
/*
* find a module by name and delete it off the module list
*/
SECStatus
SECMOD_DeleteInternalModule(const char *name)
{
SECMODModuleList *mlp;
SECMODModuleList **mlpp;
SECStatus rv = SECFailure;
if (pendingModule) {
PORT_SetError(SEC_ERROR_MODULE_STUCK);
return rv;
}
SECMOD_GetWriteLock(moduleLock);
for(mlpp = &modules,mlp = modules;
mlp != NULL; mlpp = &mlp->next, mlp = *mlpp) {
if (PORT_Strcmp(name,mlp->module->commonName) == 0) {
/* don't delete the internal module */
if (mlp->module->internal) {
SECMOD_RemoveList(mlpp,mlp);
rv = STAN_RemoveModuleFromDefaultTrustDomain(mlp->module);
}
break;
}
}
SECMOD_ReleaseWriteLock(moduleLock);
if (rv == SECSuccess) {
SECMODModule *newModule,*oldModule;
if (mlp->module->isFIPS) {
newModule = SECMOD_CreateModule(NULL, SECMOD_INT_NAME,
NULL, SECMOD_INT_FLAGS);
} else {
newModule = SECMOD_CreateModule(NULL, SECMOD_FIPS_NAME,
NULL, SECMOD_FIPS_FLAGS);
}
if (newModule) {
newModule->libraryParams =
PORT_ArenaStrdup(newModule->arena,mlp->module->libraryParams);
rv = SECMOD_AddModule(newModule);
if (rv != SECSuccess) {
SECMOD_DestroyModule(newModule);
newModule = NULL;
}
}
if (newModule == NULL) {
SECMODModuleList *last = NULL,*mlp2;
/* we're in pretty deep trouble if this happens...Security
* not going to work well... try to put the old module back on
* the list */
SECMOD_GetWriteLock(moduleLock);
for(mlp2 = modules; mlp2 != NULL; mlp2 = mlp->next) {
last = mlp2;
}
if (last == NULL) {
modules = mlp;
} else {
SECMOD_AddList(last,mlp,NULL);
}
SECMOD_ReleaseWriteLock(moduleLock);
return SECFailure;
}
pendingModule = oldModule = internalModule;
internalModule = NULL;
SECMOD_DestroyModule(oldModule);
SECMOD_DeletePermDB(mlp->module);
SECMOD_DestroyModuleListElement(mlp);
internalModule = newModule; /* adopt the module */
}
return rv;
}
SECStatus
SECMOD_AddModule(SECMODModule *newModule)
{
SECStatus rv;
SECMODModule *oldModule;
/* Test if a module w/ the same name already exists */
/* and return SECWouldBlock if so. */
/* We should probably add a new return value such as */
/* SECDublicateModule, but to minimize ripples, I'll */
/* give SECWouldBlock a new meaning */
if ((oldModule = SECMOD_FindModule(newModule->commonName)) != NULL) {
SECMOD_DestroyModule(oldModule);
return SECWouldBlock;
/* module already exists. */
}
rv = SECMOD_LoadPKCS11Module(newModule);
if (rv != SECSuccess) {
return rv;
}
if (newModule->parent == NULL) {
newModule->parent = SECMOD_ReferenceModule(defaultDBModule);
}
SECMOD_AddPermDB(newModule);
SECMOD_AddModuleToList(newModule);
rv = STAN_AddModuleToDefaultTrustDomain(newModule);
return rv;
}
PK11SlotInfo *
SECMOD_FindSlot(SECMODModule *module,const char *name)
{
int i;
char *string;
PK11SlotInfo *retSlot = NULL;
SECMOD_GetReadLock(moduleLock);
for (i=0; i < module->slotCount; i++) {
PK11SlotInfo *slot = module->slots[i];
if (PK11_IsPresent(slot)) {
string = PK11_GetTokenName(slot);
} else {
string = PK11_GetSlotName(slot);
}
if (PORT_Strcmp(name,string) == 0) {
retSlot = PK11_ReferenceSlot(slot);
break;
}
}
SECMOD_ReleaseReadLock(moduleLock);
if (retSlot == NULL) {
PORT_SetError(SEC_ERROR_NO_SLOT_SELECTED);
}
return retSlot;
}
SECStatus
PK11_GetModInfo(SECMODModule *mod,CK_INFO *info)
{
CK_RV crv;
if (mod->functionList == NULL) return SECFailure;
crv = PK11_GETTAB(mod)->C_GetInfo(info);
if (crv != CKR_OK) {
PORT_SetError(PK11_MapError(crv));
}
return (crv == CKR_OK) ? SECSuccess : SECFailure;
}
/* Determine if we have the FIP's module loaded as the default
* module to trigger other bogus FIPS requirements in PKCS #12 and
* SSL
*/
PRBool
PK11_IsFIPS(void)
{
SECMODModule *mod = SECMOD_GetInternalModule();
if (mod && mod->internal) {
return mod->isFIPS;
}
return PR_FALSE;
}
/* combines NewModule() & AddModule */
/* give a string for the module name & the full-path for the dll, */
/* installs the PKCS11 module & update registry */
SECStatus
SECMOD_AddNewModuleEx(const char* moduleName, const char* dllPath,
unsigned long defaultMechanismFlags,
unsigned long cipherEnableFlags,
char* modparms, char* nssparms)
{
SECMODModule *module;
SECStatus result = SECFailure;
int s,i;
PK11SlotInfo* slot;
PR_SetErrorText(0, NULL);
module = SECMOD_CreateModule(dllPath, moduleName, modparms, nssparms);
if (module == NULL) {
return result;
}
if (module->dllName != NULL) {
if (module->dllName[0] != 0) {
result = SECMOD_AddModule(module);
if (result == SECSuccess) {
/* turn on SSL cipher enable flags */
module->ssl[0] = cipherEnableFlags;
SECMOD_GetReadLock(moduleLock);
/* check each slot to turn on appropriate mechanisms */
for (s = 0; s < module->slotCount; s++) {
slot = (module->slots)[s];
/* for each possible mechanism */
for (i=0; i < num_pk11_default_mechanisms; i++) {
/* we are told to turn it on by default ? */
PRBool add =
(PK11_DefaultArray[i].flag & defaultMechanismFlags) ?
PR_TRUE: PR_FALSE;
result = PK11_UpdateSlotAttribute(slot,
&(PK11_DefaultArray[i]), add);
} /* for each mechanism */
/* disable each slot if the defaultFlags say so */
if (defaultMechanismFlags & PK11_DISABLE_FLAG) {
PK11_UserDisableSlot(slot);
}
} /* for each slot of this module */
SECMOD_ReleaseReadLock(moduleLock);
/* delete and re-add module in order to save changes
* to the module */
result = SECMOD_UpdateModule(module);
}
}
}
SECMOD_DestroyModule(module);
return result;
}
SECStatus
SECMOD_AddNewModule(const char* moduleName, const char* dllPath,
unsigned long defaultMechanismFlags,
unsigned long cipherEnableFlags)
{
return SECMOD_AddNewModuleEx(moduleName, dllPath, defaultMechanismFlags,
cipherEnableFlags,
NULL, NULL); /* don't pass module or nss params */
}
SECStatus
SECMOD_UpdateModule(SECMODModule *module)
{
SECStatus result;
result = SECMOD_DeletePermDB(module);
if (result == SECSuccess) {
result = SECMOD_AddPermDB(module);
}
return result;
}
/* Public & Internal(Security Library) representation of
* encryption mechanism flags conversion */
/* Currently, the only difference is that internal representation
* puts RANDOM_FLAG at bit 31 (Most-significant bit), but
* public representation puts this bit at bit 28
*/
unsigned long
SECMOD_PubMechFlagstoInternal(unsigned long publicFlags)
{
unsigned long internalFlags = publicFlags;
if (publicFlags & PUBLIC_MECH_RANDOM_FLAG) {
internalFlags &= ~PUBLIC_MECH_RANDOM_FLAG;
internalFlags |= SECMOD_RANDOM_FLAG;
}
return internalFlags;
}
unsigned long
SECMOD_InternaltoPubMechFlags(unsigned long internalFlags)
{
unsigned long publicFlags = internalFlags;
if (internalFlags & SECMOD_RANDOM_FLAG) {
publicFlags &= ~SECMOD_RANDOM_FLAG;
publicFlags |= PUBLIC_MECH_RANDOM_FLAG;
}
return publicFlags;
}
/* Public & Internal(Security Library) representation of */
/* cipher flags conversion */
/* Note: currently they are just stubs */
unsigned long
SECMOD_PubCipherFlagstoInternal(unsigned long publicFlags)
{
return publicFlags;
}
unsigned long
SECMOD_InternaltoPubCipherFlags(unsigned long internalFlags)
{
return internalFlags;
}
/* Funtion reports true if module of modType is installed/configured */
PRBool
SECMOD_IsModulePresent( unsigned long int pubCipherEnableFlags )
{
PRBool result = PR_FALSE;
SECMODModuleList *mods = SECMOD_GetDefaultModuleList();
SECMOD_GetReadLock(moduleLock);
for ( ; mods != NULL; mods = mods->next) {
if (mods->module->ssl[0] &
SECMOD_PubCipherFlagstoInternal(pubCipherEnableFlags)) {
result = PR_TRUE;
}
}
SECMOD_ReleaseReadLock(moduleLock);
return result;
}
/* create a new ModuleListElement */
SECMODModuleList *SECMOD_NewModuleListElement(void)
{
SECMODModuleList *newModList;
newModList= (SECMODModuleList *) PORT_Alloc(sizeof(SECMODModuleList));
if (newModList) {
newModList->next = NULL;
newModList->module = NULL;
}
return newModList;
}
/*
* make a new reference to a module so It doesn't go away on us
*/
SECMODModule *
SECMOD_ReferenceModule(SECMODModule *module)
{
PZ_Lock(module->refLock);
PORT_Assert(module->refCount > 0);
module->refCount++;
PZ_Unlock(module->refLock);
return module;
}
/* destroy an existing module */
void
SECMOD_DestroyModule(SECMODModule *module)
{
PRBool willfree = PR_FALSE;
int slotCount;
int i;
PZ_Lock(module->refLock);
if (module->refCount-- == 1) {
willfree = PR_TRUE;
}
PORT_Assert(willfree || (module->refCount > 0));
PZ_Unlock(module->refLock);
if (!willfree) {
return;
}
if (module->parent != NULL) {
SECMODModule *parent = module->parent;
/* paranoia, don't loop forever if the modules are looped */
module->parent = NULL;
SECMOD_DestroyModule(parent);
}
/* slots can't really disappear until our module starts freeing them,
* so this check is safe */
slotCount = module->slotCount;
if (slotCount == 0) {
SECMOD_SlotDestroyModule(module,PR_FALSE);
return;
}
/* now free all out slots, when they are done, they will cause the
* module to disappear altogether */
for (i=0 ; i < slotCount; i++) {
if (!module->slots[i]->disabled) {
PK11_ClearSlotList(module->slots[i]);
}
PK11_FreeSlot(module->slots[i]);
}
/* WARNING: once the last slot has been freed is it possible (even likely)
* that module is no more... touching it now is a good way to go south */
}
/* we can only get here if we've destroyed the module, or some one has
* erroneously freed a slot that wasn't referenced. */
void
SECMOD_SlotDestroyModule(SECMODModule *module, PRBool fromSlot)
{
PRBool willfree = PR_FALSE;
if (fromSlot) {
PORT_Assert(module->refCount == 0);
PZ_Lock(module->refLock);
if (module->slotCount-- == 1) {
willfree = PR_TRUE;
}
PORT_Assert(willfree || (module->slotCount > 0));
PZ_Unlock(module->refLock);
if (!willfree) return;
}
if (module == pendingModule) {
pendingModule = NULL;
}
if (module->loaded) {
SECMOD_UnloadModule(module);
}
PZ_DestroyLock(module->refLock);
PORT_FreeArena(module->arena,PR_FALSE);
secmod_PrivateModuleCount--;
}
/* destroy a list element
* this destroys a single element, and returns the next element
* on the chain. It makes it easy to implement for loops to delete
* the chain. It also make deleting a single element easy */
SECMODModuleList *
SECMOD_DestroyModuleListElement(SECMODModuleList *element)
{
SECMODModuleList *next = element->next;
if (element->module) {
SECMOD_DestroyModule(element->module);
element->module = NULL;
}
PORT_Free(element);
return next;
}
/*
* Destroy an entire module list
*/
void
SECMOD_DestroyModuleList(SECMODModuleList *list)
{
SECMODModuleList *lp;
for ( lp = list; lp != NULL; lp = SECMOD_DestroyModuleListElement(lp)) ;
}
PRBool
SECMOD_CanDeleteInternalModule(void)
{
return (PRBool) (pendingModule == NULL);
}
/*
* check to see if the module has added new slots. PKCS 11 v2.20 allows for
* modules to add new slots, but never remove them. Slots cannot be added
* between a call to C_GetSlotLlist(Flag, NULL, &count) and the subsequent
* C_GetSlotList(flag, &data, &count) so that the array doesn't accidently
* grow on the caller. It is permissible for the slots to increase between
* successive calls with NULL to get the size.
*/
SECStatus
SECMOD_UpdateSlotList(SECMODModule *mod)
{
CK_RV crv;
CK_ULONG count;
CK_ULONG i, oldCount;
PRBool freeRef = PR_FALSE;
void *mark = NULL;
CK_ULONG *slotIDs = NULL;
PK11SlotInfo **newSlots = NULL;
PK11SlotInfo **oldSlots = NULL;
/* C_GetSlotList is not a session function, make sure
* calls are serialized */
PZ_Lock(mod->refLock);
freeRef = PR_TRUE;
/* see if the number of slots have changed */
crv = PK11_GETTAB(mod)->C_GetSlotList(PR_FALSE, NULL, &count);
if (crv != CKR_OK) {
PORT_SetError(PK11_MapError(crv));
goto loser;
}
/* nothing new, blow out early, we want this function to be quick
* and cheap in the normal case */
if (count == mod->slotCount) {
PZ_Unlock(mod->refLock);
return SECSuccess;
}
if (count < (CK_ULONG)mod->slotCount) {
/* shouldn't happen with a properly functioning PKCS #11 module */
PORT_SetError( SEC_ERROR_INCOMPATIBLE_PKCS11 );
goto loser;
}
/* get the new slot list */
slotIDs = PORT_NewArray(CK_SLOT_ID, count);
if (slotIDs == NULL) {
goto loser;
}
crv = PK11_GETTAB(mod)->C_GetSlotList(PR_FALSE, slotIDs, &count);
if (crv != CKR_OK) {
PORT_SetError(PK11_MapError(crv));
goto loser;
}
freeRef = PR_FALSE;
PZ_Unlock(mod->refLock);
mark = PORT_ArenaMark(mod->arena);
if (mark == NULL) {
goto loser;
}
newSlots = PORT_ArenaZNewArray(mod->arena,PK11SlotInfo *,count);
/* walk down the new slot ID list returned from the module. We keep
* the old slots which match a returned ID, and we initialize the new
* slots. */
for (i=0; i < count; i++) {
PK11SlotInfo *slot = SECMOD_FindSlotByID(mod,slotIDs[i]);
if (!slot) {
/* we have a new slot create a new slot data structure */
slot = PK11_NewSlotInfo(mod);
if (!slot) {
goto loser;
}
PK11_InitSlot(mod, slotIDs[i], slot);
STAN_InitTokenForSlotInfo(NULL, slot);
}
newSlots[i] = slot;
}
STAN_ResetTokenInterator(NULL);
PORT_Free(slotIDs);
slotIDs = NULL;
PORT_ArenaUnmark(mod->arena, mark);
/* until this point we're still using the old slot list. Now we update
* module slot list. We update the slots (array) first then the count,
* since we've already guarrenteed that count has increased (just in case
* someone is looking at the slots field of module without holding the
* moduleLock */
SECMOD_GetWriteLock(moduleLock);
oldCount =mod->slotCount;
oldSlots = mod->slots;
mod->slots = newSlots; /* typical arena 'leak'... old mod->slots is
* allocated out of the module arena and won't
* be freed until the module is freed */
mod->slotCount = count;
SECMOD_ReleaseWriteLock(moduleLock);
/* free our old references before forgetting about oldSlot*/
for (i=0; i < oldCount; i++) {
PK11_FreeSlot(oldSlots[i]);
}
return SECSuccess;
loser:
if (freeRef) {
PZ_Unlock(mod->refLock);
}
if (slotIDs) {
PORT_Free(slotIDs);
}
/* free all the slots we allocated. newSlots are part of the
* mod arena. NOTE: the newSlots array contain both new and old
* slots, but we kept a reference to the old slots when we built the new
* array, so we need to free all the slots in newSlots array. */
if (newSlots) {
for (i=0; i < count; i++) {
if (newSlots[i] == NULL) {
break; /* hit the last one */
}
PK11_FreeSlot(newSlots[i]);
}
}
/* must come after freeing newSlots */
if (mark) {
PORT_ArenaRelease(mod->arena, mark);
}
return SECFailure;
}
/*
* this handles modules that do not support C_WaitForSlotEvent().
* The internal flags are stored. Note that C_WaitForSlotEvent() does not
* have a timeout, so we don't have one for handleWaitForSlotEvent() either.
*/
PK11SlotInfo *
secmod_HandleWaitForSlotEvent(SECMODModule *mod, unsigned long flags,
PRIntervalTime latency)
{
PRBool removableSlotsFound = PR_FALSE;
int i;
int error = SEC_ERROR_NO_EVENT;
PZ_Lock(mod->refLock);
if (mod->evControlMask & SECMOD_END_WAIT) {
mod->evControlMask &= ~SECMOD_END_WAIT;
PZ_Unlock(mod->refLock);
PORT_SetError(SEC_ERROR_NO_EVENT);
return NULL;
}
mod->evControlMask |= SECMOD_WAIT_SIMULATED_EVENT;
while (mod->evControlMask & SECMOD_WAIT_SIMULATED_EVENT) {
PZ_Unlock(mod->refLock);
/* now is a good time to see if new slots have been added */
SECMOD_UpdateSlotList(mod);
/* loop through all the slots on a module */
SECMOD_GetReadLock(moduleLock);
for (i=0; i < mod->slotCount; i++) {
PK11SlotInfo *slot = mod->slots[i];
uint16 series;
PRBool present;
/* perm modules do not change */
if (slot->isPerm) {
continue;
}
removableSlotsFound = PR_TRUE;
/* simulate the PKCS #11 module flags. are the flags different
* from the last time we called? */
series = slot->series;
present = PK11_IsPresent(slot);
if ((slot->flagSeries != series) || (slot->flagState != present)) {
slot->flagState = present;
slot->flagSeries = series;
SECMOD_ReleaseReadLock(moduleLock);
PZ_Lock(mod->refLock);
mod->evControlMask &= ~SECMOD_END_WAIT;
PZ_Unlock(mod->refLock);
return PK11_ReferenceSlot(slot);
}
}
SECMOD_ReleaseReadLock(moduleLock);
/* if everything was perm modules, don't lock up forever */
if (!removableSlotsFound) {
error =SEC_ERROR_NO_SLOT_SELECTED;
PZ_Lock(mod->refLock);
break;
}
if (flags & CKF_DONT_BLOCK) {
PZ_Lock(mod->refLock);
break;
}
PR_Sleep(latency);
PZ_Lock(mod->refLock);
}
mod->evControlMask &= ~SECMOD_END_WAIT;
PZ_Unlock(mod->refLock);
PORT_SetError(error);
return NULL;
}
/*
* this function waits for a token event on any slot of a given module
* This function should not be called from more than one thread of the
* same process (though other threads can make other library calls
* on this module while this call is blocked).
*/
PK11SlotInfo *
SECMOD_WaitForAnyTokenEvent(SECMODModule *mod, unsigned long flags,
PRIntervalTime latency)
{
CK_SLOT_ID id;
CK_RV crv;
PK11SlotInfo *slot;
if (!pk11_getFinalizeModulesOption() ||
((mod->cryptokiVersion.major == 2) &&
(mod->cryptokiVersion.minor < 1))) {
/* if we are sharing the module with other software in our
* address space, we can't reliably use C_WaitForSlotEvent(),
* and if the module is version 2.0, C_WaitForSlotEvent() doesn't
* exist */
return secmod_HandleWaitForSlotEvent(mod, flags, latency);
}
/* first the the PKCS #11 call */
PZ_Lock(mod->refLock);
if (mod->evControlMask & SECMOD_END_WAIT) {
goto end_wait;
}
mod->evControlMask |= SECMOD_WAIT_PKCS11_EVENT;
PZ_Unlock(mod->refLock);
crv = PK11_GETTAB(mod)->C_WaitForSlotEvent(flags, &id, NULL);
PZ_Lock(mod->refLock);
mod->evControlMask &= ~SECMOD_WAIT_PKCS11_EVENT;
/* if we are in end wait, short circuit now, don't even risk
* going into secmod_HandleWaitForSlotEvent */
if (mod->evControlMask & SECMOD_END_WAIT) {
goto end_wait;
}
PZ_Unlock(mod->refLock);
if (crv == CKR_FUNCTION_NOT_SUPPORTED) {
/* module doesn't support that call, simulate it */
return secmod_HandleWaitForSlotEvent(mod, flags, latency);
}
if (crv != CKR_OK) {
/* we can get this error if finalize was called while we were
* still running. This is the only way to force a C_WaitForSlotEvent()
* to return in PKCS #11. In this case, just return that there
* was no event. */
if (crv == CKR_CRYPTOKI_NOT_INITIALIZED) {
PORT_SetError(SEC_ERROR_NO_EVENT);
} else {
PORT_SetError(PK11_MapError(crv));
}
return NULL;
}
slot = SECMOD_FindSlotByID(mod, id);
if (slot == NULL) {
/* possibly a new slot that was added? */
SECMOD_UpdateSlotList(mod);
slot = SECMOD_FindSlotByID(mod, id);
}
/* if we are in the delay period for the "isPresent" call, reset
* the delay since we know things have probably changed... */
if (slot && slot->nssToken && slot->nssToken->slot) {
nssSlot_ResetDelay(slot->nssToken->slot);
}
return slot;
/* must be called with the lock on. */
end_wait:
mod->evControlMask &= ~SECMOD_END_WAIT;
PZ_Unlock(mod->refLock);
PORT_SetError(SEC_ERROR_NO_EVENT);
return NULL;
}
/*
* This function "wakes up" WaitForAnyTokenEvent. It's a pretty drastic
* function, possibly bringing down the pkcs #11 module in question. This
* should be OK because 1) it does reinitialize, and 2) it should only be
* called when we are on our way to tear the whole system down anyway.
*/
SECStatus
SECMOD_CancelWait(SECMODModule *mod)
{
unsigned long controlMask = mod->evControlMask;
SECStatus rv = SECSuccess;
CK_RV crv;
PZ_Lock(mod->refLock);
mod->evControlMask |= SECMOD_END_WAIT;
controlMask = mod->evControlMask;
if (controlMask & SECMOD_WAIT_PKCS11_EVENT) {
if (!pk11_getFinalizeModulesOption()) {
/* can't get here unless pk11_getFinalizeModulesOption is set */
PORT_Assert(0);
PORT_SetError(SEC_ERROR_LIBRARY_FAILURE);
rv = SECFailure;
goto loser;
}
/* NOTE: this call will drop all transient keys, in progress
* operations, and any authentication. This is the only documented
* way to get WaitForSlotEvent to return. Also note: for non-thread
* safe tokens, we need to hold the module lock, this is not yet at
* system shutdown/startup time, so we need to protect these calls */
crv = PK11_GETTAB(mod)->C_Finalize(NULL);
/* ok, we slammed the module down, now we need to reinit it in case
* we intend to use it again */
if (CKR_OK == crv) {
PRBool alreadyLoaded;
secmod_ModuleInit(mod, &alreadyLoaded);
} else {
/* Finalized failed for some reason, notify the application
* so maybe it has a prayer of recovering... */
PORT_SetError(PK11_MapError(crv));
rv = SECFailure;
}
} else if (controlMask & SECMOD_WAIT_SIMULATED_EVENT) {
mod->evControlMask &= ~SECMOD_WAIT_SIMULATED_EVENT;
/* Simulated events will eventually timeout
* and wake up in the loop */
}
loser:
PZ_Unlock(mod->refLock);
return rv;
}
/*
* check to see if the module has removable slots that we may need to
* watch for.
*/
PRBool
SECMOD_HasRemovableSlots(SECMODModule *mod)
{
int i;
PRBool ret = PR_FALSE;
SECMOD_GetReadLock(moduleLock);
for (i=0; i < mod->slotCount; i++) {
PK11SlotInfo *slot = mod->slots[i];
/* perm modules are not inserted or removed */
if (slot->isPerm) {
continue;
}
ret = PR_TRUE;
break;
}
SECMOD_ReleaseReadLock(moduleLock);
return ret;
}
/*
* helper function to actually create and destroy user defined slots
*/
static SECStatus
secmod_UserDBOp(CK_OBJECT_CLASS objClass, const char *sendSpec)
{
PK11SlotInfo *slot = PK11_GetInternalSlot();
CK_OBJECT_HANDLE dummy;
CK_ATTRIBUTE template[2] ;
CK_ATTRIBUTE *attrs = template;
SECStatus rv;
CK_RV crv;
PK11_SETATTRS(attrs, CKA_CLASS, &objClass, sizeof(objClass)); attrs++;
PK11_SETATTRS(attrs, CKA_NETSCAPE_MODULE_SPEC , (unsigned char *)sendSpec,
strlen(sendSpec)+1); attrs++;
PORT_Assert(attrs-template <= 2);
PK11_EnterSlotMonitor(slot);
crv = PK11_CreateNewObject(slot, slot->session,
template, attrs-template, PR_FALSE, &dummy);
PK11_ExitSlotMonitor(slot);
if (crv != CKR_OK) {
PK11_FreeSlot(slot);
PORT_SetError(PK11_MapError(crv));
return SECFailure;
}
rv = SECMOD_UpdateSlotList(slot->module);
PK11_FreeSlot(slot);
return rv;
}
/*
* add escapes to protect quote characters...
*/
static char *
nss_addEscape(const char *string, char quote)
{
char *newString = 0;
int escapes = 0, size = 0;
const char *src;
char *dest;
for (src=string; *src ; src++) {
if ((*src == quote) || (*src == '\\')) escapes++;
size++;
}
newString = PORT_ZAlloc(escapes+size+1);
if (newString == NULL) {
return NULL;
}
for (src=string, dest=newString; *src; src++,dest++) {
if ((*src == '\\') || (*src == quote)) {
*dest++ = '\\';
}
*dest = *src;
}
return newString;
}
static char *
nss_doubleEscape(const char *string)
{
char *round1 = NULL;
char *retValue = NULL;
if (string == NULL) {
goto done;
}
round1 = nss_addEscape(string,'>');
if (round1) {
retValue = nss_addEscape(round1,']');
PORT_Free(round1);
}
done:
if (retValue == NULL) {
retValue = PORT_Strdup("");
}
return retValue;
}
/*
* Open a new database using the softoken. The caller is responsible for making
* sure the module spec is correct and usable. The caller should ask for one
* new database per call if the caller wants to get meaningful information
* about the new database.
*
* moduleSpec is the same data that you would pass to softoken at
* initialization time under the 'tokens' options. For example, if you were
* to specify tokens=<0x4=[configdir='./mybackup' tokenDescription='Backup']>
* You would specify "configdir='./mybackup' tokenDescription='Backup'" as your
* module spec here. The slot ID will be calculated for you by
* SECMOD_OpenUserDB().
*
* Typical parameters here are configdir, tokenDescription and flags.
*
* a Full list is below:
*
*
* configDir - The location of the databases for this token. If configDir is
* not specified, and noCertDB and noKeyDB is not specified, the load
* will fail.
* certPrefix - Cert prefix for this token.
* keyPrefix - Prefix for the key database for this token. (if not specified,
* certPrefix will be used).
* tokenDescription - The label value for this token returned in the
* CK_TOKEN_INFO structure with an internationalize string (UTF8).
* This value will be truncated at 32 bytes (no NULL, partial UTF8
* characters dropped). You should specify a user friendly name here
* as this is the value the token will be refered to in most
* application UI's. You should make sure tokenDescription is unique.
* slotDescription - The slotDescription value for this token returned
* in the CK_SLOT_INFO structure with an internationalize string
* (UTF8). This value will be truncated at 64 bytes (no NULL, partial
* UTF8 characters dropped). This name will not change after the
* database is closed. It should have some number to make this unique.
* minPWLen - minimum password length for this token.
* flags - comma separated list of flag values, parsed case-insensitive.
* Valid flags are:
* readOnly - Databases should be opened read only.
* noCertDB - Don't try to open a certificate database.
* noKeyDB - Don't try to open a key database.
* forceOpen - Don't fail to initialize the token if the
* databases could not be opened.
* passwordRequired - zero length passwords are not acceptable
* (valid only if there is a keyDB).
* optimizeSpace - allocate smaller hash tables and lock tables.
* When this flag is not specified, Softoken will allocate
* large tables to prevent lock contention.
*/
PK11SlotInfo *
SECMOD_OpenUserDB(const char *moduleSpec)
{
CK_SLOT_ID slotID = 0;
char *escSpec;
char *sendSpec;
SECStatus rv;
SECMODModule *mod;
CK_SLOT_ID i, minSlotID, maxSlotID;
PRBool found = PR_FALSE;
if (moduleSpec == NULL) {
return NULL;
}
/* NOTE: unlike most PK11 function, this does not return a reference
* to the module */
mod = SECMOD_GetInternalModule();
if (!mod) {
/* shouldn't happen */
PORT_SetError(SEC_ERROR_LIBRARY_FAILURE);
return NULL;
}
/* look for a free slot id on the internal module */
if (mod->isFIPS) {
minSlotID = SFTK_MIN_FIPS_USER_SLOT_ID;
maxSlotID = SFTK_MAX_FIPS_USER_SLOT_ID;
} else {
minSlotID = SFTK_MIN_USER_SLOT_ID;
maxSlotID = SFTK_MAX_USER_SLOT_ID;
}
for (i=minSlotID; i < maxSlotID; i++) {
PK11SlotInfo *slot = SECMOD_LookupSlot(mod->moduleID, i);
if (slot) {
PRBool present = PK11_IsPresent(slot);
PK11_FreeSlot(slot);
if (present) {
continue;
}
/* not present means it's available */
}
/* it doesn't exist or isn't present, it's available */
slotID = i;
found = PR_TRUE;
break;
}
if (!found) {
/* this could happen if we try to open too many slots */
PORT_SetError(SEC_ERROR_NO_SLOT_SELECTED);
return NULL;
}
/* we've found the slot, now build the moduleSpec */
escSpec = nss_doubleEscape(moduleSpec);
if (escSpec == NULL) {
return NULL;
}
sendSpec = PR_smprintf("tokens=[0x%x=<%s>]", slotID, escSpec);
PORT_Free(escSpec);
if (sendSpec == NULL) {
/* PR_smprintf does not set no memory error */
PORT_SetError(SEC_ERROR_NO_MEMORY);
return NULL;
}
rv = secmod_UserDBOp(CKO_NETSCAPE_NEWSLOT, sendSpec);
PR_smprintf_free(sendSpec);
if (rv != SECSuccess) {
return NULL;
}
return SECMOD_FindSlotByID(mod, slotID);
}
/*
* close an already opened user database. NOTE: the database must be
* in the internal token, and must be one created with SECMOD_OpenUserDB().
* Once the database is closed, the slot will remain as an empty slot
* until it's used again with SECMOD_OpenUserDB().
*/
SECStatus
SECMOD_CloseUserDB(PK11SlotInfo *slot)
{
SECStatus rv;
char *sendSpec;
if (!slot->isInternal) {
PORT_SetError(SEC_ERROR_INVALID_ARGS);
return SECFailure;
}
sendSpec = PR_smprintf("tokens=[0x%x=<>]", slot->slotID);
if (sendSpec == NULL) {
/* PR_smprintf does not set no memory error */
PORT_SetError(SEC_ERROR_NO_MEMORY);
return SECFailure;
}
rv = secmod_UserDBOp(CKO_NETSCAPE_DELSLOT, sendSpec);
PR_smprintf_free(sendSpec);
return rv;
}