RetroZilla/security/nss/lib/libpkix/include/pkix_params.h

1729 lines
63 KiB
C
Raw Normal View History

2015-10-21 05:03:22 +02:00
/* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is the PKIX-C library.
*
* The Initial Developer of the Original Code is
* Sun Microsystems, Inc.
* Portions created by the Initial Developer are
* Copyright 2004-2007 Sun Microsystems, Inc. All Rights Reserved.
*
* Contributor(s):
* Sun Microsystems, Inc.
*
* Alternatively, the contents of this file may be used under the terms of
* either the GNU General Public License Version 2 or later (the "GPL"), or
* the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
/*
* This file defines functions associated with the various parameters used
* by the top-level functions.
*
*/
#ifndef _PKIX_PARAMS_H
#define _PKIX_PARAMS_H
#include "pkixt.h"
#ifdef __cplusplus
extern "C" {
#endif
/* General
*
* Please refer to the libpkix Programmer's Guide for detailed information
* about how to use the libpkix library. Certain key warnings and notices from
* that document are repeated here for emphasis.
*
* All identifiers in this file (and all public identifiers defined in
* libpkix) begin with "PKIX_". Private identifiers only intended for use
* within the library begin with "pkix_".
*
* A function returns NULL upon success, and a PKIX_Error pointer upon failure.
*
* Unless otherwise noted, for all accessor (gettor) functions that return a
* PKIX_PL_Object pointer, callers should assume that this pointer refers to a
* shared object. Therefore, the caller should treat this shared object as
* read-only and should not modify this shared object. When done using the
* shared object, the caller should release the reference to the object by
* using the PKIX_PL_Object_DecRef function.
*
* While a function is executing, if its arguments (or anything referred to by
* its arguments) are modified, free'd, or destroyed, the function's behavior
* is undefined.
*
*/
/* PKIX_ProcessingParams
*
* PKIX_ProcessingParams are parameters used when validating or building a
* chain of certificates. Using the parameters, the caller can specify several
* things, including the various inputs to the PKIX chain validation
* algorithm (such as trust anchors, initial policies, etc), any customized
* functionality (such as CertChainCheckers, RevocationCheckers, CertStores),
* and whether revocation checking should be disabled.
*
* Once the caller has created the ProcessingParams object, the caller then
* passes it to PKIX_ValidateChain or PKIX_BuildChain, which uses it to call
* the user's callback functions as needed during the validation or building
* process.
*
* If a parameter is not set (or is set to NULL), it will be set to the
* default value for that parameter. The default value for the Date parameter
* is NULL, which indicates the current time when the path is validated. The
* default for the remaining parameters is the least constrained.
*/
/*
* FUNCTION: PKIX_ProcessingParams_Create
* DESCRIPTION:
*
* Creates a new ProcessingParams object. Trust anchor list is set to
* newly created empty list of trust. In this case trust anchors will
* be taken from provided cert store. Pointed to the created
* ProcessingParams object is stored in "pParams".
*
* PARAMETERS:
* "anchors"
* Address of List of (non-empty) TrustAnchors to be used.
* Must be non-NULL.
* "pParams"
* Address where object pointer will be stored. Must be non-NULL.
* "plContext"
* Platform-specific context pointer.
* THREAD SAFETY:
* Thread Safe (see Thread Safety Definitions in Programmer's Guide)
* RETURNS:
* Returns NULL if the function succeeds.
* Returns a Params Error if the function fails in a non-fatal way.
* Returns a Fatal Error if the function fails in an unrecoverable way.
*/
PKIX_Error *
PKIX_ProcessingParams_Create(
PKIX_ProcessingParams **pParams,
void *plContext);
/*
* FUNCTION: PKIX_ProcessingParams_GetCertChainCheckers
* DESCRIPTION:
*
* Retrieves a pointer to the List of CertChainCheckers (if any) that are set
* in the ProcessingParams pointed to by "params" and stores it at
* "pCheckers". Each CertChainChecker represents a custom certificate
* validation check used by PKIX_ValidateChain or PKIX_BuildChain as needed
* during the validation or building process. If "params" does not have any
* CertChainCheckers, this function stores an empty List at "pCheckers".
*
* PARAMETERS:
* "params"
* Address of ProcessingParams whose List of CertChainCheckers (if any)
* are to be stored. Must be non-NULL.
* "pCheckers"
* Address where object pointer will be stored. Must be non-NULL.
* "plContext"
* Platform-specific context pointer.
* THREAD SAFETY:
* Conditionally Thread Safe
* (see Thread Safety Definitions in Programmer's Guide)
* RETURNS:
* Returns NULL if the function succeeds.
* Returns a Params Error if the function fails in a non-fatal way.
* Returns a Fatal Error if the function fails in an unrecoverable way.
*/
PKIX_Error *
PKIX_ProcessingParams_GetCertChainCheckers(
PKIX_ProcessingParams *params,
PKIX_List **pCheckers, /* list of PKIX_CertChainChecker */
void *plContext);
/*
* FUNCTION: PKIX_ProcessingParams_SetCertChainCheckers
* DESCRIPTION:
*
* Sets the ProcessingParams pointed to by "params" with a List of
* CertChainCheckers pointed to by "checkers". Each CertChainChecker
* represents a custom certificate validation check used by
* PKIX_ValidateChain or PKIX_BuildChain as needed during the validation or
* building process. If "checkers" is NULL, no CertChainCheckers will be used.
*
* PARAMETERS:
* "params"
* Address of ProcessingParams whose List of CertChainCheckers is to be
* set. Must be non-NULL.
* "checkers"
* Address of List of CertChainCheckers to be set. If NULL, no
* CertChainCheckers will be used.
* "plContext"
* Platform-specific context pointer.
* THREAD SAFETY:
* Not Thread Safe - assumes exclusive access to "params" and "checkers"
* (see Thread Safety Definitions in Programmer's Guide)
* RETURNS:
* Returns NULL if the function succeeds.
* Returns a Params Error if the function fails in a non-fatal way.
* Returns a Fatal Error if the function fails in an unrecoverable way.
*/
PKIX_Error *
PKIX_ProcessingParams_SetCertChainCheckers(
PKIX_ProcessingParams *params,
PKIX_List *checkers, /* list of PKIX_CertChainChecker */
void *plContext);
/*
* FUNCTION: PKIX_ProcessingParams_AddCertChainChecker
* DESCRIPTION:
*
* Adds the CertChainChecker pointed to by "checker" to the ProcessingParams
* pointed to by "params". The CertChainChecker represents a custom
* certificate validation check used by PKIX_ValidateChain or PKIX_BuildChain
* as needed during the validation or building process.
*
* PARAMETERS:
* "params"
* Address of ProcessingParams to be added to. Must be non-NULL.
* "checker"
* Address of CertChainChecker to be added. Must be non-NULL.
* "plContext"
* Platform-specific context pointer.
* THREAD SAFETY:
* Not Thread Safe - assumes exclusive access to "params"
* (see Thread Safety Definitions in Programmer's Guide)
* RETURNS:
* Returns NULL if the function succeeds.
* Returns a Params Error if the function fails in a non-fatal way.
* Returns a Fatal Error if the function fails in an unrecoverable way.
*/
PKIX_Error *
PKIX_ProcessingParams_AddCertChainChecker(
PKIX_ProcessingParams *params,
PKIX_CertChainChecker *checker,
void *plContext);
/*
* FUNCTION: PKIX_ProcessingParams_GetRevocationChecker
* DESCRIPTION:
*
* Retrieves a pointer to the RevocationChecker that are set
* in the ProcessingParams pointed to by "params" and stores it at
* "pRevChecker". Each RevocationChecker represents a revocation
* check used by PKIX_ValidateChain or PKIX_BuildChain as needed during the
* validation or building process. If "params" does not have any
* RevocationCheckers, this function stores an empty List at "pRevChecker".
*
* PARAMETERS:
* "params"
* Address of ProcessingParams whose List of RevocationCheckers
* is to be stored. Must be non-NULL.
* "pRevChecker"
* Address where object pointer will be stored. Must be non-NULL.
* "plContext"
* Platform-specific context pointer.
* THREAD SAFETY:
* Conditionally Thread Safe
* (see Thread Safety Definitions in Programmer's Guide)
* RETURNS:
* Returns NULL if the function succeeds.
* Returns a Params Error if the function fails in a non-fatal way.
* Returns a Fatal Error if the function fails in an unrecoverable way.
*/
PKIX_Error *
PKIX_ProcessingParams_GetRevocationChecker(
PKIX_ProcessingParams *params,
PKIX_RevocationChecker **pChecker,
void *plContext);
/*
* FUNCTION: PKIX_ProcessingParams_SetRevocationChecker
* DESCRIPTION:
*
* Sets the ProcessingParams pointed to by "params" with a
* RevocationChecker pointed to by "revChecker". Revocation
* checker object should be created and assigned to processing
* parameters before chain build or validation can begin.
*
* PARAMETERS:
* "params"
* Address of ProcessingParams whose List of RevocationCheckers is to be
* set. Must be non-NULL.
* "revChecker"
* Address of RevocationChecker to be set. Must be set before chain
* building or validation.
* "plContext"
* Platform-specific context pointer.
* THREAD SAFETY:
* Not Thread Safe - assumes exclusive access to "params"
* (see Thread Safety Definitions in Programmer's Guide)
* RETURNS:
* Returns NULL if the function succeeds.
* Returns a Params Error if the function fails in a non-fatal way.
* Returns a Fatal Error if the function fails in an unrecoverable way.
*/
PKIX_Error *
PKIX_ProcessingParams_SetRevocationChecker(
PKIX_ProcessingParams *params,
PKIX_RevocationChecker *revChecker,
void *plContext);
/*
* FUNCTION: PKIX_ProcessingParams_GetCertStores
* DESCRIPTION:
*
* Retrieves a pointer to the List of CertStores (if any) that are set in the
* ProcessingParams pointed to by "params" and stores it at "pStores". Each
* CertStore represents a particular repository from which certificates and
* CRLs can be retrieved by PKIX_ValidateChain or PKIX_BuildChain as needed
* during the validation or building process. If "params" does not have any
* CertStores, this function stores an empty List at "pStores".
*
* PARAMETERS:
* "params"
* Address of ProcessingParams whose List of CertStores (if any) are to
* be stored. Must be non-NULL.
* "pStores"
* Address where object pointer will be stored. Must be non-NULL.
* "plContext"
* Platform-specific context pointer.
* THREAD SAFETY:
* Conditionally Thread Safe
* (see Thread Safety Definitions in Programmer's Guide)
* RETURNS:
* Returns NULL if the function succeeds.
* Returns a Params Error if the function fails in a non-fatal way.
* Returns a Fatal Error if the function fails in an unrecoverable way.
*/
PKIX_Error *
PKIX_ProcessingParams_GetCertStores(
PKIX_ProcessingParams *params,
PKIX_List **pStores, /* list of PKIX_CertStore */
void *plContext);
/*
* FUNCTION: PKIX_ProcessingParams_SetCertStores
* DESCRIPTION:
*
* Sets the ProcessingParams pointed to by "params" with a List of CertStores
* pointed to by "stores". Each CertStore represents a particular repository
* from which certificates and CRLs can be retrieved by PKIX_ValidateChain or
* PKIX_BuildChain as needed during the validation or building process. If
* "stores" is NULL, no CertStores will be used.
*
* PARAMETERS:
* "params"
* Address of ProcessingParams whose List of CertStores is to be set.
* Must be non-NULL.
* "stores"
* Address of List of CertStores to be set. If NULL, no CertStores will
* be used.
* "plContext"
* Platform-specific context pointer.
* THREAD SAFETY:
* Not Thread Safe - assumes exclusive access to "params"
* (see Thread Safety Definitions in Programmer's Guide)
* RETURNS:
* Returns NULL if the function succeeds.
* Returns a Params Error if the function fails in a non-fatal way.
* Returns a Fatal Error if the function fails in an unrecoverable way.
*/
PKIX_Error *
PKIX_ProcessingParams_SetCertStores(
PKIX_ProcessingParams *params,
PKIX_List *stores, /* list of PKIX_CertStore */
void *plContext);
/*
* FUNCTION: PKIX_ProcessingParams_AddCertStore
* DESCRIPTION:
*
* Adds the CertStore pointed to by "store" to the ProcessingParams pointed
* to by "params". The CertStore represents a particular repository from
* which certificates and CRLs can be retrieved by PKIX_ValidateChain or
* PKIX_BuildChain as needed during the validation or building process.
*
* PARAMETERS:
* "params"
* Address of ProcessingParams to be added to. Must be non-NULL.
* "store"
* Address of CertStore to be added.
* "plContext"
* Platform-specific context pointer.
* THREAD SAFETY:
* Not Thread Safe - assumes exclusive access to "params"
* (see Thread Safety Definitions in Programmer's Guide)
* RETURNS:
* Returns NULL if the function succeeds.
* Returns a Params Error if the function fails in a non-fatal way.
* Returns a Fatal Error if the function fails in an unrecoverable way.
*/
PKIX_Error *
PKIX_ProcessingParams_AddCertStore(
PKIX_ProcessingParams *params,
PKIX_CertStore *store,
void *plContext);
/*
* FUNCTION: PKIX_ProcessingParams_GetDate
* DESCRIPTION:
*
* Retrieves a pointer to the Date (if any) that is set in the
* ProcessingParams pointed to by "params" and stores it at "pDate". The
* Date represents the time for which the validation of the certificate chain
* should be determined. If "params" does not have any Date set, this function
* stores NULL at "pDate".
*
* PARAMETERS:
* "params"
* Address of ProcessingParams whose Date (if any) is to be stored.
* Must be non-NULL.
* "pDate"
* Address where object pointer will be stored. Must be non-NULL.
* "plContext"
* Platform-specific context pointer.
* THREAD SAFETY:
* Conditionally Thread Safe
* (see Thread Safety Definitions in Programmer's Guide)
* RETURNS:
* Returns NULL if the function succeeds.
* Returns a Params Error if the function fails in a non-fatal way.
* Returns a Fatal Error if the function fails in an unrecoverable way.
*/
PKIX_Error *
PKIX_ProcessingParams_GetDate(
PKIX_ProcessingParams *params,
PKIX_PL_Date **pDate,
void *plContext);
/*
* FUNCTION: PKIX_ProcessingParams_SetDate
* DESCRIPTION:
*
* Sets the ProcessingParams pointed to by "params" with a Date pointed to by
* "date". The Date represents the time for which the validation of the
* certificate chain should be determined. If "date" is NULL, the current
* time is used during validation.
*
* PARAMETERS:
* "params"
* Address of ProcessingParams whose Date is to be set. Must be non-NULL.
* "date"
* Address of Date to be set. If NULL, current time is used.
* "plContext"
* Platform-specific context pointer.
* THREAD SAFETY:
* Not Thread Safe - assumes exclusive access to "params"
* (see Thread Safety Definitions in Programmer's Guide)
* RETURNS:
* Returns NULL if the function succeeds.
* Returns a Params Error if the function fails in a non-fatal way.
* Returns a Fatal Error if the function fails in an unrecoverable way.
*/
PKIX_Error *
PKIX_ProcessingParams_SetDate(
PKIX_ProcessingParams *params,
PKIX_PL_Date *date,
void *plContext);
/*
* FUNCTION: PKIX_ProcessingParams_GetInitialPolicies
* DESCRIPTION:
*
* Retrieves a pointer to the List of OIDs (if any) that are set in the
* ProcessingParams pointed to by "params" and stores it at "pInitPolicies".
* Each OID represents an initial policy identifier, indicating that any
* one of these policies would be acceptable to the certificate user for
* the purposes of certification path processing. If "params" does not have
* any initial policies, this function stores an empty List at
* "pInitPolicies".
*
* PARAMETERS:
* "params"
* Address of ProcessingParams whose List of OIDs (if any) are to be
* stored. Must be non-NULL.
* "pInitPolicies"
* Address where object pointer will be stored. Must be non-NULL.
* "plContext"
* Platform-specific context pointer.
* THREAD SAFETY:
* Conditionally Thread Safe
* (see Thread Safety Definitions in Programmer's Guide)
* RETURNS:
* Returns NULL if the function succeeds.
* Returns a Params Error if the function fails in a non-fatal way.
* Returns a Fatal Error if the function fails in an unrecoverable way.
*/
PKIX_Error *
PKIX_ProcessingParams_GetInitialPolicies(
PKIX_ProcessingParams *params,
PKIX_List **pInitPolicies, /* list of PKIX_PL_OID */
void *plContext);
/*
* FUNCTION: PKIX_ProcessingParams_SetInitialPolicies
* DESCRIPTION:
*
* Sets the ProcessingParams pointed to by "params" with a List of OIDs
* pointed to by "initPolicies".
*
* Each OID represents an initial policy identifier, indicating that any
* one of these policies would be acceptable to the certificate user for
* the purposes of certification path processing. By default, any policy
* is acceptable (i.e. all policies), so a user that wants to allow any
* policy as acceptable does not need to call this method. Similarly, if
* initPolicies is NULL or points to an empty List, all policies are
* acceptable.
*
* PARAMETERS:
* "params"
* Address of ProcessingParams whose List of OIDs is to be set.
* Must be non-NULL.
* "initPolicies"
* Address of List of OIDs to be set. If NULL or if pointing to an empty
* List, all policies are acceptable.
* "plContext"
* Platform-specific context pointer.
* THREAD SAFETY:
* Not Thread Safe - assumes exclusive access to "params"
* (see Thread Safety Definitions in Programmer's Guide)
* RETURNS:
* Returns NULL if the function succeeds.
* Returns a Params Error if the function fails in a non-fatal way.
* Returns a Fatal Error if the function fails in an unrecoverable way.
*/
PKIX_Error *
PKIX_ProcessingParams_SetInitialPolicies(
PKIX_ProcessingParams *params,
PKIX_List *initPolicies, /* list of PKIX_PL_OID */
void *plContext);
/*
* FUNCTION: PKIX_ProcessingParams_GetPolicyQualifiersRejected
* DESCRIPTION:
*
* Checks whether the ProcessingParams pointed to by "params" indicate that
* policy qualifiers should be rejected and stores the Boolean result at
* "pRejected".
*
* PARAMETERS:
* "params"
* Address of ProcessingParams used to determine whether or not policy
* qualifiers should be rejected. Must be non-NULL.
* "pRejected"
* Address where Boolean will be stored. Must be non-NULL.
* "plContext"
* Platform-specific context pointer.
* THREAD SAFETY:
* Conditionally Thread Safe
* (see Thread Safety Definitions in Programmer's Guide)
* RETURNS:
* Returns NULL if the function succeeds.
* Returns a Params Error if the function fails in a non-fatal way.
* Returns a Fatal Error if the function fails in an unrecoverable way.
*/
PKIX_Error *
PKIX_ProcessingParams_GetPolicyQualifiersRejected(
PKIX_ProcessingParams *params,
PKIX_Boolean *pRejected,
void *plContext);
/*
* FUNCTION: PKIX_ProcessingParams_SetPolicyQualifiersRejected
* DESCRIPTION:
*
* Specifies in the ProcessingParams pointed to by "params" whether policy
* qualifiers are rejected using the Boolean value of "rejected".
*
* PARAMETERS:
* "params"
* Address of ProcessingParams to be set. Must be non-NULL.
* "rejected"
* Boolean value indicating whether policy qualifiers are to be rejected.
* "plContext"
* Platform-specific context pointer.
* THREAD SAFETY:
* Not Thread Safe - assumes exclusive access to "params"
* (see Thread Safety Definitions in Programmer's Guide)
* RETURNS:
* Returns NULL if the function succeeds.
* Returns a Params Error if the function fails in a non-fatal way.
* Returns a Fatal Error if the function fails in an unrecoverable way.
*/
PKIX_Error *
PKIX_ProcessingParams_SetPolicyQualifiersRejected(
PKIX_ProcessingParams *params,
PKIX_Boolean rejected,
void *plContext);
/*
* FUNCTION: PKIX_ProcessingParams_GetTargetCertConstraints
* DESCRIPTION:
*
* Retrieves a pointer to the CertSelector (if any) that is set in the
* ProcessingParams pointed to by "params" and stores it at "pConstraints".
* The CertSelector represents the constraints to be placed on the target
* certificate. If "params" does not have any CertSelector set, this function
* stores NULL at "pConstraints".
*
* PARAMETERS:
* "params"
* Address of ProcessingParams whose CertSelector (if any) is to be
* stored. Must be non-NULL.
* "pConstraints"
* Address where object pointer will be stored. Must be non-NULL.
* "plContext"
* Platform-specific context pointer.
* THREAD SAFETY:
* Conditionally Thread Safe
* (see Thread Safety Definitions in Programmer's Guide)
* RETURNS:
* Returns NULL if the function succeeds.
* Returns a Params Error if the function fails in a non-fatal way.
* Returns a Fatal Error if the function fails in an unrecoverable way.
*/
PKIX_Error *
PKIX_ProcessingParams_GetTargetCertConstraints(
PKIX_ProcessingParams *params,
PKIX_CertSelector **pConstraints,
void *plContext);
/*
* FUNCTION: PKIX_ProcessingParams_SetTargetCertConstraints
* DESCRIPTION:
*
* Sets the ProcessingParams pointed to by "params" with a CertSelector
* pointed to by "constraints". The CertSelector represents the constraints
* to be placed on the target certificate. If "constraints" is NULL, no
* constraints are defined.
*
* PARAMETERS:
* "params"
* Address of ProcessingParams whose CertSelector is to be set.
* Must be non-NULL.
* "constraints"
* Address of CertSelector to be set. If NULL, no constraints are defined.
* "plContext"
* Platform-specific context pointer.
* THREAD SAFETY:
* Not Thread Safe - assumes exclusive access to "params"
* (see Thread Safety Definitions in Programmer's Guide)
* RETURNS:
* Returns NULL if the function succeeds.
* Returns a Params Error if the function fails in a non-fatal way.
* Returns a Fatal Error if the function fails in an unrecoverable way.
*/
PKIX_Error *
PKIX_ProcessingParams_SetTargetCertConstraints(
PKIX_ProcessingParams *params,
PKIX_CertSelector *constraints,
void *plContext);
/*
* FUNCTION: PKIX_ProcessingParams_GetTrustAnchors
* DESCRIPTION:
*
* Retrieves a pointer to the List of TrustAnchors that are set in
* the ProcessingParams pointed to by "params" and stores it at "pAnchors".
* If the function succeeds, the pointer to the List is guaranteed to be
* non-NULL and the List is guaranteed to be non-empty.
*
* PARAMETERS:
* "params"
* Address of ProcessingParams whose List of TrustAnchors are to
* be stored. Must be non-NULL.
* "pAnchors"
* Address where object pointer will be stored. Must be non-NULL.
* "plContext"
* Platform-specific context pointer.
* THREAD SAFETY:
* Conditionally Thread Safe
* (see Thread Safety Definitions in Programmer's Guide)
* RETURNS:
* Returns NULL if the function succeeds.
* Returns a Params Error if the function fails in a non-fatal way.
* Returns a Fatal Error if the function fails in an unrecoverable way.
*/
PKIX_Error *
PKIX_ProcessingParams_GetTrustAnchors(
PKIX_ProcessingParams *params,
PKIX_List **pAnchors, /* list of TrustAnchor */
void *plContext);
/*
* FUNCTION: PKIX_ProcessingParams_SetTrustAnchors
* DESCRIPTION:
*
* Sets user defined set of trust anchors. A certificate will be considered
* invalid if it does not chain to a trusted anchor from this list.
*
* PARAMETERS:
* "params"
* Address of ProcessingParams whose List of TrustAnchors are to
* be stored. Must be non-NULL.
* "anchors"
* Address of the trust anchors list object. Must be non-NULL.
* "plContext"
* Platform-specific context pointer.
* THREAD SAFETY:
* Conditionally Thread Safe
* (see Thread Safety Definitions in Programmer's Guide)
* RETURNS:
* Returns NULL if the function succeeds.
* Returns a Params Error if the function fails in a non-fatal way.
* Returns a Fatal Error if the function fails in an unrecoverable way.
*/
PKIX_Error *
PKIX_ProcessingParams_SetTrustAnchors(
PKIX_ProcessingParams *params,
PKIX_List *pAnchors, /* list of TrustAnchor */
void *plContext);
/*
* FUNCTION: PKIX_ProcessingParams_GetUseAIAForCertFetching
* DESCRIPTION:
*
* Retrieves a pointer to the Boolean. The boolean value represents
* the switch value that is used to identify if url in cert AIA extension
* may be used for cert fetching.
* If the function succeeds, the pointer to the Boolean is guaranteed to be
* non-NULL.
*
* PARAMETERS:
* "params"
* Address of ProcessingParams. Must be non-NULL.
* "pUseAIA"
* Address where object pointer will be stored. Must be non-NULL.
* "plContext"
* Platform-specific context pointer.
* THREAD SAFETY:
* Conditionally Thread Safe
* (see Thread Safety Definitions in Programmer's Guide)
* RETURNS:
* Returns NULL if the function succeeds.
* Returns a Params Error if the function fails in a non-fatal way.
* Returns a Fatal Error if the function fails in an unrecoverable way.
*/
PKIX_Error *
PKIX_ProcessingParams_GetUseAIAForCertFetching(
PKIX_ProcessingParams *params,
PKIX_Boolean *pUseAIA, /* list of TrustAnchor */
void *plContext);
/*
* FUNCTION: PKIX_ProcessingParams_SetTrustAnchors
* DESCRIPTION:
*
* Sets switch value that defines if url in cert AIA extension
* may be used for cert fetching.
*
* PARAMETERS:
* "params"
* Address of ProcessingParams.
* "useAIA"
* Address of the trust anchors list object. Must be non-NULL.
* "plContext"
* Platform-specific context pointer.
* THREAD SAFETY:
* Conditionally Thread Safe
* (see Thread Safety Definitions in Programmer's Guide)
* RETURNS:
* Returns NULL if the function succeeds.
* Returns a Params Error if the function fails in a non-fatal way.
* Returns a Fatal Error if the function fails in an unrecoverable way.
*/
PKIX_Error *
PKIX_ProcessingParams_SetUseAIAForCertFetching(
PKIX_ProcessingParams *params,
PKIX_Boolean useAIA,
void *plContext);
/*
* FUNCTION: PKIX_ProcessingParams_GetHintCerts
* DESCRIPTION:
*
* Retrieves a pointer to a List of Certs supplied by the user as a suggested
* partial CertChain (subject to verification), that are set in the
* ProcessingParams pointed to by "params", and stores it at "pHintCerts".
* The List returned may be empty or NULL.
*
* PARAMETERS:
* "params"
* Address of ProcessingParams whose List of TrustAnchors are to
* be stored. Must be non-NULL.
* "pHintCerts"
* Address where object pointer will be stored. Must be non-NULL.
* "plContext"
* Platform-specific context pointer.
* THREAD SAFETY:
* Conditionally Thread Safe
* (see Thread Safety Definitions in Programmer's Guide)
* RETURNS:
* Returns NULL if the function succeeds.
* Returns a Params Error if the function fails in a non-fatal way.
* Returns a Fatal Error if the function fails in an unrecoverable way.
*/
PKIX_Error *
PKIX_ProcessingParams_GetHintCerts(
PKIX_ProcessingParams *params,
PKIX_List **pHintCerts,
void *plContext);
/*
* FUNCTION: PKIX_ProcessingParams_SetHintCerts
* DESCRIPTION:
*
* Stores a pointer to a List of Certs supplied by the user as a suggested
* partial CertChain (subject to verification), as an element in the
* ProcessingParams pointed to by "params". The List may be empty or NULL.
*
* PARAMETERS:
* "params"
* Address of ProcessingParams whose List of HintCerts is to be stored.
* Must be non-NULL.
* "hintCerts"
* Address where object pointer will be stored. Must be non-NULL.
* "plContext"
* Platform-specific context pointer.
* THREAD SAFETY:
* Conditionally Thread Safe
* (see Thread Safety Definitions in Programmer's Guide)
* RETURNS:
* Returns NULL if the function succeeds.
* Returns a Params Error if the function fails in a non-fatal way.
* Returns a Fatal Error if the function fails in an unrecoverable way.
*/
PKIX_Error *
PKIX_ProcessingParams_SetHintCerts(
PKIX_ProcessingParams *params,
PKIX_List *hintCerts,
void *plContext);
/*
* FUNCTION: PKIX_ProcessingParams_GetResourceLimits
* DESCRIPTION:
*
* Retrieves a pointer to the ResourceLimits (if any) that is set in the
* ProcessingParams pointed to by "params" and stores it at "pResourceLimits".
* The ResourceLimits represent the maximum resource usage that the caller
* desires (such as MaxTime). The ValidateChain or BuildChain call will not
* exceed these maximum limits. If "params" does not have any ResourceLimits
* set, this function stores NULL at "pResourceLimits".
*
* PARAMETERS:
* "params"
* Address of ProcessingParams whose ResourceLimits (if any) are to be
* stored. Must be non-NULL.
* "pResourceLimits"
* Address where object pointer will be stored. Must be non-NULL.
* "plContext"
* Platform-specific context pointer.
* THREAD SAFETY:
* Conditionally Thread Safe
* (see Thread Safety Definitions in Programmer's Guide)
* RETURNS:
* Returns NULL if the function succeeds.
* Returns a Params Error if the function fails in a non-fatal way.
* Returns a Fatal Error if the function fails in an unrecoverable way.
*/
PKIX_Error *
PKIX_ProcessingParams_GetResourceLimits(
PKIX_ProcessingParams *params,
PKIX_ResourceLimits **pResourceLimits,
void *plContext);
/*
* FUNCTION: PKIX_ProcessingParams_SetResourceLimits
* DESCRIPTION:
*
* Sets the ProcessingParams pointed to by "params" with a ResourceLimits
* object pointed to by "resourceLimits". The ResourceLimits represent the
* maximum resource usage that the caller desires (such as MaxTime). The
* ValidateChain or BuildChain call will not exceed these maximum limits.
* If "resourceLimits" is NULL, no ResourceLimits are defined.
*
* PARAMETERS:
* "params"
* Address of ProcessingParams whose ResourceLimits are to be set.
* Must be non-NULL.
* "resourceLimits"
* Address of ResourceLimits to be set. If NULL, no limits are defined.
* "plContext"
* Platform-specific context pointer.
* THREAD SAFETY:
* Not Thread Safe - assumes exclusive access to "params"
* (see Thread Safety Definitions in Programmer's Guide)
* RETURNS:
* Returns NULL if the function succeeds.
* Returns a Params Error if the function fails in a non-fatal way.
* Returns a Fatal Error if the function fails in an unrecoverable way.
*/
PKIX_Error *
PKIX_ProcessingParams_SetResourceLimits(
PKIX_ProcessingParams *params,
PKIX_ResourceLimits *resourceLimits,
void *plContext);
/*
* FUNCTION: PKIX_ProcessingParams_IsAnyPolicyInhibited
* DESCRIPTION:
*
* Checks whether the ProcessingParams pointed to by "params" indicate that
* anyPolicy is inhibited and stores the Boolean result at "pInhibited".
*
* PARAMETERS:
* "params"
* Address of ProcessingParams used to determine whether or not anyPolicy
* inhibited. Must be non-NULL.
* "pInhibited"
* Address where Boolean will be stored. Must be non-NULL.
* "plContext"
* Platform-specific context pointer.
* THREAD SAFETY:
* Conditionally Thread Safe
* (see Thread Safety Definitions in Programmer's Guide)
* RETURNS:
* Returns NULL if the function succeeds.
* Returns a Params Error if the function fails in a non-fatal way.
* Returns a Fatal Error if the function fails in an unrecoverable way.
*/
PKIX_Error *
PKIX_ProcessingParams_IsAnyPolicyInhibited(
PKIX_ProcessingParams *params,
PKIX_Boolean *pInhibited,
void *plContext);
/*
* FUNCTION: PKIX_ProcessingParams_SetAnyPolicyInhibited
* DESCRIPTION:
*
* Specifies in the ProcessingParams pointed to by "params" whether anyPolicy
* is inhibited using the Boolean value of "inhibited".
*
* PARAMETERS:
* "params"
* Address of ProcessingParams to be set. Must be non-NULL.
* "inhibited"
* Boolean value indicating whether anyPolicy is to be inhibited.
* "plContext"
* Platform-specific context pointer.
* THREAD SAFETY:
* Not Thread Safe - assumes exclusive access to "params"
* (see Thread Safety Definitions in Programmer's Guide)
* RETURNS:
* Returns NULL if the function succeeds.
* Returns a Params Error if the function fails in a non-fatal way.
* Returns a Fatal Error if the function fails in an unrecoverable way.
*/
PKIX_Error *
PKIX_ProcessingParams_SetAnyPolicyInhibited(
PKIX_ProcessingParams *params,
PKIX_Boolean inhibited,
void *plContext);
/*
* FUNCTION: PKIX_ProcessingParams_IsExplicitPolicyRequired
* DESCRIPTION:
*
* Checks whether the ProcessingParams pointed to by "params" indicate that
* explicit policies are required and stores the Boolean result at
* "pRequired".
*
* PARAMETERS:
* "params"
* Address of ProcessingParams used to determine whether or not explicit
* policies are required. Must be non-NULL.
* "pRequired"
* Address where Boolean will be stored. Must be non-NULL.
* "plContext"
* Platform-specific context pointer.
* THREAD SAFETY:
* Conditionally Thread Safe
* (see Thread Safety Definitions in Programmer's Guide)
* RETURNS:
* Returns NULL if the function succeeds.
* Returns a Params Error if the function fails in a non-fatal way.
* Returns a Fatal Error if the function fails in an unrecoverable way.
*/
PKIX_Error *
PKIX_ProcessingParams_IsExplicitPolicyRequired(
PKIX_ProcessingParams *params,
PKIX_Boolean *pRequired,
void *plContext);
/*
* FUNCTION: PKIX_ProcessingParams_SetExplicitPolicyRequired
* DESCRIPTION:
*
* Specifies in the ProcessingParams pointed to by "params" whether explicit
* policies are required using the Boolean value of "required".
*
* PARAMETERS:
* "params"
* Address of ProcessingParams to be set. Must be non-NULL.
* "required"
* Boolean value indicating whether explicit policies are to be required.
* "plContext"
* Platform-specific context pointer.
* THREAD SAFETY:
* Not Thread Safe - assumes exclusive access to "params"
* (see Thread Safety Definitions in Programmer's Guide)
* RETURNS:
* Returns NULL if the function succeeds.
* Returns a Params Error if the function fails in a non-fatal way.
* Returns a Fatal Error if the function fails in an unrecoverable way.
*/
PKIX_Error *
PKIX_ProcessingParams_SetExplicitPolicyRequired(
PKIX_ProcessingParams *params,
PKIX_Boolean required,
void *plContext);
/*
* FUNCTION: PKIX_ProcessingParams_IsPolicyMappingInhibited
* DESCRIPTION:
*
* Checks whether the ProcessingParams pointed to by "params" indicate that
* policyMapping is inhibited and stores the Boolean result at "pInhibited".
*
* PARAMETERS:
* "params"
* Address of ProcessingParams used to determine whether or not policy
* mappings are inhibited. Must be non-NULL.
* "pInhibited"
* Address where Boolean will be stored. Must be non-NULL.
* "plContext"
* Platform-specific context pointer.
* THREAD SAFETY:
* Conditionally Thread Safe
* (see Thread Safety Definitions in Programmer's Guide)
* RETURNS:
* Returns NULL if the function succeeds.
* Returns a Params Error if the function fails in a non-fatal way.
* Returns a Fatal Error if the function fails in an unrecoverable way.
*/
PKIX_Error *
PKIX_ProcessingParams_IsPolicyMappingInhibited(
PKIX_ProcessingParams *params,
PKIX_Boolean *pInhibited,
void *plContext);
/*
* FUNCTION: PKIX_ProcessingParams_SetPolicyMappingInhibited
* DESCRIPTION:
*
* Specifies in the ProcessingParams pointed to by "params" whether policy
* mapping is inhibited using the Boolean value of "inhibited".
*
* PARAMETERS:
* "params"
* Address of ProcessingParams to be set. Must be non-NULL.
* "inhibited"
* Boolean value indicating whether policy mapping is to be inhibited.
* "plContext"
* Platform-specific context pointer.
* THREAD SAFETY:
* Not Thread Safe - assumes exclusive access to "params"
* (see Thread Safety Definitions in Programmer's Guide)
* RETURNS:
* Returns NULL if the function succeeds.
* Returns a Params Error if the function fails in a non-fatal way.
* Returns a Fatal Error if the function fails in an unrecoverable way.
*/
PKIX_Error *
PKIX_ProcessingParams_SetPolicyMappingInhibited(
PKIX_ProcessingParams *params,
PKIX_Boolean inhibited,
void *plContext);
/* PKIX_ValidateParams
*
* PKIX_ValidateParams consists of a ProcessingParams object as well as the
* List of Certs (certChain) that the caller is trying to validate.
*/
/*
* FUNCTION: PKIX_ValidateParams_Create
* DESCRIPTION:
*
* Creates a new ValidateParams object and stores it at "pParams".
*
* PARAMETERS:
* "procParams"
* Address of ProcessingParams to be used. Must be non-NULL.
* "chain"
* Address of List of Certs (certChain) to be validated. Must be non-NULL.
* "pParams"
* Address where object pointer will be stored. Must be non-NULL.
* "plContext"
* Platform-specific context pointer.
* THREAD SAFETY:
* Thread Safe (see Thread Safety Definitions in Programmer's Guide)
* RETURNS:
* Returns NULL if the function succeeds.
* Returns a Params Error if the function fails in a non-fatal way.
* Returns a Fatal Error if the function fails in an unrecoverable way.
*/
PKIX_Error *
PKIX_ValidateParams_Create(
PKIX_ProcessingParams *procParams,
PKIX_List *chain,
PKIX_ValidateParams **pParams,
void *plContext);
/*
* FUNCTION: PKIX_ValidateParams_GetProcessingParams
* DESCRIPTION:
*
* Retrieves a pointer to the ProcessingParams that represent the basic
* certificate processing parameters used during chain validation and chain
* building from the ValidateParams pointed to by "valParams" and stores it
* at "pProcParams". If the function succeeds, the pointer to the
* ProcessingParams is guaranteed to be non-NULL.
*
* PARAMETERS:
* "valParams"
* Address of ValidateParams whose ProcessingParams are to be stored.
* Must be non-NULL.
* "pProcParams"
* Address where object pointer will be stored. Must be non-NULL.
* "plContext"
* Platform-specific context pointer.
* THREAD SAFETY:
* Thread Safe (see Thread Safety Definitions in Programmer's Guide)
* RETURNS:
* Returns NULL if the function succeeds.
* Returns a Params Error if the function fails in a non-fatal way.
* Returns a Fatal Error if the function fails in an unrecoverable way.
*/
PKIX_Error *
PKIX_ValidateParams_GetProcessingParams(
PKIX_ValidateParams *valParams,
PKIX_ProcessingParams **pProcParams,
void *plContext);
/*
* FUNCTION: PKIX_ValidateParams_GetCertChain
* DESCRIPTION:
*
* Retrieves a pointer to the List of Certs (certChain) that is set in the
* ValidateParams pointed to by "valParams" and stores it at "pChain". If the
* function succeeds, the pointer to the CertChain is guaranteed to be
* non-NULL.
*
* PARAMETERS:
* "valParams"
* Address of ValidateParams whose CertChain is to be stored.
* Must be non-NULL.
* "pChain"
* Address where object pointer will be stored. Must be non-NULL.
* "plContext"
* Platform-specific context pointer.
* THREAD SAFETY:
* Thread Safe (see Thread Safety Definitions in Programmer's Guide)
* RETURNS:
* Returns NULL if the function succeeds.
* Returns a Params Error if the function fails in a non-fatal way.
* Returns a Fatal Error if the function fails in an unrecoverable way.
*/
PKIX_Error *
PKIX_ValidateParams_GetCertChain(
PKIX_ValidateParams *valParams,
PKIX_List **pChain,
void *plContext);
/* PKIX_TrustAnchor
*
* A PKIX_TrustAnchor represents a trusted entity and can be specified using a
* self-signed certificate or using the trusted CA's name and public key. In
* order to limit the trust in the trusted entity, name constraints can also
* be imposed on the trust anchor.
*/
/*
* FUNCTION: PKIX_TrustAnchor_CreateWithCert
* DESCRIPTION:
*
* Creates a new TrustAnchor object using the Cert pointed to by "cert" as
* the trusted certificate and stores it at "pAnchor". Once created, a
* TrustAnchor is immutable.
*
* PARAMETERS:
* "cert"
* Address of Cert to use as trusted certificate. Must be non-NULL.
* "pAnchor"
* Address where object pointer will be stored. Must be non-NULL.
* "plContext"
* Platform-specific context pointer.
* THREAD SAFETY:
* Thread Safe (see Thread Safety Definitions in Programmer's Guide)
* RETURNS:
* Returns NULL if the function succeeds.
* Returns a Params Error if the function fails in a non-fatal way.
* Returns a Fatal Error if the function fails in an unrecoverable way.
*/
PKIX_Error *
PKIX_TrustAnchor_CreateWithCert(
PKIX_PL_Cert *cert,
PKIX_TrustAnchor **pAnchor,
void *plContext);
/*
* FUNCTION: PKIX_TrustAnchor_CreateWithNameKeyPair
* DESCRIPTION:
*
* Creates a new TrustAnchor object using the X500Name pointed to by "name",
* and the PublicKey pointed to by "pubKey" and stores it at "pAnchor". The
* CertNameConstraints pointed to by "nameConstraints" (if any) are used to
* limit the trust placed in this trust anchor. To indicate that name
* constraints don't apply, set "nameConstraints" to NULL. Once created, a
* TrustAnchor is immutable.
*
* PARAMETERS:
* "name"
* Address of X500Name to use as name of trusted CA. Must be non-NULL.
* "pubKey"
* Address of PublicKey to use as trusted public key. Must be non-NULL.
* "nameConstraints"
* Address of CertNameConstraints to use as initial name constraints.
* If NULL, no name constraints are applied.
* "pAnchor"
* Address where object pointer will be stored. Must be non-NULL.
* "plContext"
* Platform-specific context pointer.
* THREAD SAFETY:
* Thread Safe (see Thread Safety Definitions in Programmer's Guide)
* RETURNS:
* Returns NULL if the function succeeds.
* Returns a Params Error if the function fails in a non-fatal way.
* Returns a Fatal Error if the function fails in an unrecoverable way.
*/
PKIX_Error *
PKIX_TrustAnchor_CreateWithNameKeyPair(
PKIX_PL_X500Name *name,
PKIX_PL_PublicKey *pubKey,
PKIX_PL_CertNameConstraints *nameConstraints,
PKIX_TrustAnchor **pAnchor,
void *plContext);
/*
* FUNCTION: PKIX_TrustAnchor_GetTrustedCert
* DESCRIPTION:
*
* Retrieves a pointer to the Cert that is set in the TrustAnchor pointed to
* by "anchor" and stores it at "pCert". If "anchor" does not have a Cert
* set, this function stores NULL at "pCert".
*
* PARAMETERS:
* "anchor"
* Address of TrustAnchor whose Cert is to be stored. Must be non-NULL.
* "pChain"
* Address where object pointer will be stored. Must be non-NULL.
* "plContext"
* Platform-specific context pointer.
* THREAD SAFETY:
* Thread Safe (see Thread Safety Definitions in Programmer's Guide)
* RETURNS:
* Returns NULL if the function succeeds.
* Returns a Params Error if the function fails in a non-fatal way.
* Returns a Fatal Error if the function fails in an unrecoverable way.
*/
PKIX_Error *
PKIX_TrustAnchor_GetTrustedCert(
PKIX_TrustAnchor *anchor,
PKIX_PL_Cert **pCert,
void *plContext);
/*
* FUNCTION: PKIX_TrustAnchor_GetCAName
* DESCRIPTION:
*
* Retrieves a pointer to the CA's X500Name (if any) that is set in the
* TrustAnchor pointed to by "anchor" and stores it at "pCAName". If "anchor"
* does not have an X500Name set, this function stores NULL at "pCAName".
*
* PARAMETERS:
* "anchor"
* Address of TrustAnchor whose CA Name is to be stored. Must be non-NULL.
* "pCAName"
* Address where object pointer will be stored. Must be non-NULL.
* "plContext"
* Platform-specific context pointer.
* THREAD SAFETY:
* Thread Safe (see Thread Safety Definitions in Programmer's Guide)
* RETURNS:
* Returns NULL if the function succeeds.
* Returns a Params Error if the function fails in a non-fatal way.
* Returns a Fatal Error if the function fails in an unrecoverable way.
*/
PKIX_Error *
PKIX_TrustAnchor_GetCAName(
PKIX_TrustAnchor *anchor,
PKIX_PL_X500Name **pCAName,
void *plContext);
/*
* FUNCTION: PKIX_TrustAnchor_GetCAPublicKey
* DESCRIPTION:
*
* Retrieves a pointer to the CA's PublicKey (if any) that is set in the
* TrustAnchor pointed to by "anchor" and stores it at "pPubKey". If "anchor"
* does not have a PublicKey set, this function stores NULL at "pPubKey".
*
* PARAMETERS:
* "anchor"
* Address of TrustAnchor whose CA PublicKey is to be stored.
* Must be non-NULL.
* "pPubKey"
* Address where object pointer will be stored. Must be non-NULL.
* "plContext"
* Platform-specific context pointer.
* THREAD SAFETY:
* Thread Safe (see Thread Safety Definitions in Programmer's Guide)
* RETURNS:
* Returns NULL if the function succeeds.
* Returns a Params Error if the function fails in a non-fatal way.
* Returns a Fatal Error if the function fails in an unrecoverable way.
*/
PKIX_Error *
PKIX_TrustAnchor_GetCAPublicKey(
PKIX_TrustAnchor *anchor,
PKIX_PL_PublicKey **pPubKey,
void *plContext);
/*
* FUNCTION: PKIX_TrustAnchor_GetNameConstraints
* DESCRIPTION:
*
* Retrieves a pointer to the CertNameConstraints (if any) set in the
* TrustAnchor pointed to by "anchor" and stores it at "pConstraints". If
* "anchor" does not have any CertNameConstraints set, this function stores
* NULL at "pConstraints".
*
* PARAMETERS:
* "anchor"
* Address of TrustAnchor whose CertNameConstraints are to be stored.
* Must be non-NULL.
* "pConstraints"
* Address where object pointer will be stored. Must be non-NULL.
* "plContext"
* Platform-specific context pointer.
* THREAD SAFETY:
* Thread Safe (see Thread Safety Definitions in Programmer's Guide)
* RETURNS:
* Returns NULL if the function succeeds.
* Returns a Params Error if the function fails in a non-fatal way.
* Returns a Fatal Error if the function fails in an unrecoverable way.
*/
PKIX_Error *
PKIX_TrustAnchor_GetNameConstraints(
PKIX_TrustAnchor *anchor,
PKIX_PL_CertNameConstraints **pNameConstraints,
void *plContext);
/* PKIX_ResourceLimits
*
* A PKIX_ResourceLimits object represents the maximum resource usage that
* the caller desires. The ValidateChain or BuildChain call
* will not exceed these maximum limits. For example, the caller may want
* a timeout value of 1 minute, meaning that if the ValidateChain or
* BuildChain function is unable to finish in 1 minute, it should abort
* with an Error.
*/
/*
* FUNCTION: PKIX_ResourceLimits_Create
* DESCRIPTION:
*
* Creates a new ResourceLimits object and stores it at "pResourceLimits".
*
* PARAMETERS:
* "pResourceLimits"
* Address where object pointer will be stored. Must be non-NULL.
* "plContext"
* Platform-specific context pointer.
* THREAD SAFETY:
* Thread Safe (see Thread Safety Definitions in Programmer's Guide)
* RETURNS:
* Returns NULL if the function succeeds.
* Returns a ResourceLimits Error if the function fails in a non-fatal way.
* Returns a Fatal Error if the function fails in an unrecoverable way.
*/
PKIX_Error *
PKIX_ResourceLimits_Create(
PKIX_ResourceLimits **pResourceLimits,
void *plContext);
/*
* FUNCTION: PKIX_ResourceLimits_GetMaxTime
* DESCRIPTION:
*
* Retrieves a PKIX_UInt32 (if any) representing the maximum time that is
* set in the ResourceLimits object pointed to by "resourceLimits" and stores
* it at "pMaxTime". This maximum time (in seconds) should not be exceeded
* by the function whose ProcessingParams contain this ResourceLimits object
* (typically ValidateChain or BuildChain). It essentially functions as a
* time-out value and is only appropriate if blocking I/O is being used.
*
* PARAMETERS:
* "resourceLimits"
* Address of ResourceLimits object whose maximum time (in seconds) is
* to be stored. Must be non-NULL.
* "pMaxTime"
* Address where PKIX_UInt32 will be stored. Must be non-NULL.
* "plContext"
* Platform-specific context pointer.
* THREAD SAFETY:
* Conditionally Thread Safe
* (see Thread Safety Definitions in Programmer's Guide)
* RETURNS:
* Returns NULL if the function succeeds.
* Returns a ResourceLimits Error if the function fails in a non-fatal way.
* Returns a Fatal Error if the function fails in an unrecoverable way.
*/
PKIX_Error *
PKIX_ResourceLimits_GetMaxTime(
PKIX_ResourceLimits *resourceLimits,
PKIX_UInt32 *pMaxTime,
void *plContext);
/*
* FUNCTION: PKIX_ResourceLimits_SetMaxTime
* DESCRIPTION:
*
* Sets the maximum time of the ResourceLimits object pointed to by
* "resourceLimits" using the PKIX_UInt32 value of "maxTime". This
* maximum time (in seconds) should not be exceeded by the function
* whose ProcessingParams contain this ResourceLimits object
* (typically ValidateChain or BuildChain). It essentially functions as a
* time-out value and is only appropriate if blocking I/O is being used.
*
* PARAMETERS:
* "resourceLimits"
* Address of ResourceLimits object whose maximum time (in seconds) is
* to be set. Must be non-NULL.
* "maxTime"
* Value of PKIX_UInt32 representing the maximum time (in seconds)
* "plContext"
* Platform-specific context pointer.
* THREAD SAFETY:
* Not Thread Safe - assumes exclusive access to "params"
* (see Thread Safety Definitions in Programmer's Guide)
* RETURNS:
* Returns NULL if the function succeeds.
* Returns a ResourceLimits Error if the function fails in a non-fatal way.
* Returns a Fatal Error if the function fails in an unrecoverable way.
*/
PKIX_Error *
PKIX_ResourceLimits_SetMaxTime(
PKIX_ResourceLimits *resourceLimits,
PKIX_UInt32 maxTime,
void *plContext);
/*
* FUNCTION: PKIX_ResourceLimits_GetMaxFanout
* DESCRIPTION:
*
* Retrieves a PKIX_UInt32 (if any) representing the maximum fanout that is
* set in the ResourceLimits object pointed to by "resourceLimits" and stores
* it at "pMaxFanout". This maximum fanout (number of certs) should not be
* exceeded by the function whose ProcessingParams contain this ResourceLimits
* object (typically ValidateChain or BuildChain). If the builder encounters
* more than this maximum number of certificates when searching for the next
* candidate certificate, it should abort and return an error. This
* parameter is only relevant for ValidateChain if it needs to internally call
* BuildChain (e.g. in order to build the chain to a CRL's issuer).
*
* PARAMETERS:
* "resourceLimits"
* Address of ResourceLimits object whose maximum fanout (number of certs)
* is to be stored. Must be non-NULL.
* "pMaxFanout"
* Address where PKIX_UInt32 will be stored. Must be non-NULL.
* "plContext"
* Platform-specific context pointer.
* THREAD SAFETY:
* Conditionally Thread Safe
* (see Thread Safety Definitions in Programmer's Guide)
* RETURNS:
* Returns NULL if the function succeeds.
* Returns a ResourceLimits Error if the function fails in a non-fatal way.
* Returns a Fatal Error if the function fails in an unrecoverable way.
*/
PKIX_Error *
PKIX_ResourceLimits_GetMaxFanout(
PKIX_ResourceLimits *resourceLimits,
PKIX_UInt32 *pMaxFanout,
void *plContext);
/*
* FUNCTION: PKIX_ResourceLimits_SetMaxFanout
* DESCRIPTION:
*
* Sets the maximum fanout of the ResourceLimits object pointed to by
* "resourceLimits" using the PKIX_UInt32 value of "maxFanout". This maximum
* fanout (number of certs) should not be exceeded by the function whose
* ProcessingParams contain this ResourceLimits object (typically ValidateChain
* or BuildChain). If the builder encounters more than this maximum number of
* certificates when searching for the next candidate certificate, it should
* abort and return an Error. This parameter is only relevant for ValidateChain
* if it needs to internally call BuildChain (e.g. in order to build the
* chain to a CRL's issuer).
*
* PARAMETERS:
* "resourceLimits"
* Address of ResourceLimits object whose maximum fanout (number of certs)
* is to be set. Must be non-NULL.
* "maxFanout"
* Value of PKIX_UInt32 representing the maximum fanout (number of certs)
* "plContext"
* Platform-specific context pointer.
* THREAD SAFETY:
* Not Thread Safe - assumes exclusive access to "params"
* (see Thread Safety Definitions in Programmer's Guide)
* RETURNS:
* Returns NULL if the function succeeds.
* Returns a ResourceLimits Error if the function fails in a non-fatal way.
* Returns a Fatal Error if the function fails in an unrecoverable way.
*/
PKIX_Error *
PKIX_ResourceLimits_SetMaxFanout(
PKIX_ResourceLimits *resourceLimits,
PKIX_UInt32 maxFanout,
void *plContext);
/*
* FUNCTION: PKIX_ResourceLimits_GetMaxDepth
* DESCRIPTION:
*
* Retrieves a PKIX_UInt32 (if any) representing the maximum depth that is
* set in the ResourceLimits object pointed to by "resourceLimits" and stores
* it at "pMaxDepth". This maximum depth (number of certs) should not be
* exceeded by the function whose ProcessingParams contain this ResourceLimits
* object (typically ValidateChain or BuildChain). If the builder encounters
* more than this maximum number of certificates when searching for the next
* candidate certificate, it should abort and return an error. This
* parameter is only relevant for ValidateChain if it needs to internally call
* BuildChain (e.g. in order to build the chain to a CRL's issuer).
*
* PARAMETERS:
* "resourceLimits"
* Address of ResourceLimits object whose maximum depth (number of certs)
* is to be stored. Must be non-NULL.
* "pMaxDepth"
* Address where PKIX_UInt32 will be stored. Must be non-NULL.
* "plContext"
* Platform-specific context pointer.
* THREAD SAFETY:
* Conditionally Thread Safe
* (see Thread Safety Definitions in Programmer's Guide)
* RETURNS:
* Returns NULL if the function succeeds.
* Returns a ResourceLimits Error if the function fails in a non-fatal way.
* Returns a Fatal Error if the function fails in an unrecoverable way.
*/
PKIX_Error *
PKIX_ResourceLimits_GetMaxDepth(
PKIX_ResourceLimits *resourceLimits,
PKIX_UInt32 *pMaxDepth,
void *plContext);
/*
* FUNCTION: PKIX_ResourceLimits_SetMaxDepth
* DESCRIPTION:
*
* Sets the maximum depth of the ResourceLimits object pointed to by
* "resourceLimits" using the PKIX_UInt32 value of "maxDepth". This maximum
* depth (number of certs) should not be exceeded by the function whose
* ProcessingParams contain this ResourceLimits object (typically ValidateChain
* or BuildChain). If the builder encounters more than this maximum number of
* certificates when searching for the next candidate certificate, it should
* abort and return an Error. This parameter is only relevant for ValidateChain
* if it needs to internally call BuildChain (e.g. in order to build the
* chain to a CRL's issuer).
*
* PARAMETERS:
* "resourceLimits"
* Address of ResourceLimits object whose maximum depth (number of certs)
* is to be set. Must be non-NULL.
* "maxDepth"
* Value of PKIX_UInt32 representing the maximum depth (number of certs)
* "plContext"
* Platform-specific context pointer.
* THREAD SAFETY:
* Not Thread Safe - assumes exclusive access to "params"
* (see Thread Safety Definitions in Programmer's Guide)
* RETURNS:
* Returns NULL if the function succeeds.
* Returns a ResourceLimits Error if the function fails in a non-fatal way.
* Returns a Fatal Error if the function fails in an unrecoverable way.
*/
PKIX_Error *
PKIX_ResourceLimits_SetMaxDepth(
PKIX_ResourceLimits *resourceLimits,
PKIX_UInt32 maxDepth,
void *plContext);
/*
* FUNCTION: PKIX_ResourceLimits_GetMaxNumberOfCerts
* DESCRIPTION:
*
* Retrieves a PKIX_UInt32 (if any) representing the maximum number of traversed
* certs that is set in the ResourceLimits object pointed to by "resourceLimits"
* and stores it at "pMaxNumber". This maximum number of traversed certs should
* not be exceeded by the function whose ProcessingParams contain this ResourceLimits
* object (typically ValidateChain or BuildChain). If the builder traverses more
* than this number of certs during the build process, it should abort and
* return an Error. This parameter is only relevant for ValidateChain if it
* needs to internally call BuildChain (e.g. in order to build the chain to a
* CRL's issuer).
*
* PARAMETERS:
* "resourceLimits"
* Address of ResourceLimits object whose maximum number of traversed certs
* is to be stored. Must be non-NULL.
* "pMaxNumber"
* Address where PKIX_UInt32 will be stored. Must be non-NULL.
* "plContext"
* Platform-specific context pointer.
* THREAD SAFETY:
* Conditionally Thread Safe
* (see Thread Safety Definitions in Programmer's Guide)
* RETURNS:
* Returns NULL if the function succeeds.
* Returns a ResourceLimits Error if the function fails in a non-fatal way.
* Returns a Fatal Error if the function fails in an unrecoverable way.
*/
PKIX_Error *
PKIX_ResourceLimits_GetMaxNumberOfCerts(
PKIX_ResourceLimits *resourceLimits,
PKIX_UInt32 *pMaxNumber,
void *plContext);
/*
* FUNCTION: PKIX_ResourceLimits_SetMaxNumberOfCerts
* DESCRIPTION:
*
* Sets the maximum number of traversed certs of the ResourceLimits object
* pointed to by "resourceLimits" using the PKIX_UInt32 value of "maxNumber".
* This maximum number of traversed certs should not be exceeded by the function
* whose ProcessingParams contain this ResourceLimits object (typically ValidateChain
* or BuildChain). If the builder traverses more than this number of certs
* during the build process, it should abort and return an Error. This parameter
* is only relevant for ValidateChain if it needs to internally call BuildChain
* (e.g. in order to build the chain to a CRL's issuer).
*
* PARAMETERS:
* "resourceLimits"
* Address of ResourceLimits object whose maximum number of traversed certs
* is to be set. Must be non-NULL.
* "maxNumber"
* Value of PKIX_UInt32 representing the maximum number of traversed certs
* "plContext"
* Platform-specific context pointer.
* THREAD SAFETY:
* Not Thread Safe - assumes exclusive access to "params"
* (see Thread Safety Definitions in Programmer's Guide)
* RETURNS:
* Returns NULL if the function succeeds.
* Returns a ResourceLimits Error if the function fails in a non-fatal way.
* Returns a Fatal Error if the function fails in an unrecoverable way.
*/
PKIX_Error *
PKIX_ResourceLimits_SetMaxNumberOfCerts(
PKIX_ResourceLimits *resourceLimits,
PKIX_UInt32 maxNumber,
void *plContext);
/*
* FUNCTION: PKIX_ResourceLimits_GetMaxNumberOfCRLs
* DESCRIPTION:
*
* Retrieves a PKIX_UInt32 (if any) representing the maximum number of traversed
* CRLs that is set in the ResourceLimits object pointed to by "resourceLimits"
* and stores it at "pMaxNumber". This maximum number of traversed CRLs should
* not be exceeded by the function whose ProcessingParams contain this ResourceLimits
* object (typically ValidateChain or BuildChain). If the builder traverses more
* than this number of CRLs during the build process, it should abort and
* return an Error. This parameter is only relevant for ValidateChain if it
* needs to internally call BuildChain (e.g. in order to build the chain to a
* CRL's issuer).
*
* PARAMETERS:
* "resourceLimits"
* Address of ResourceLimits object whose maximum number of traversed CRLs
* is to be stored. Must be non-NULL.
* "pMaxNumber"
* Address where PKIX_UInt32 will be stored. Must be non-NULL.
* "plContext"
* Platform-specific context pointer.
* THREAD SAFETY:
* Conditionally Thread Safe
* (see Thread Safety Definitions in Programmer's Guide)
* RETURNS:
* Returns NULL if the function succeeds.
* Returns a ResourceLimits Error if the function fails in a non-fatal way.
* Returns a Fatal Error if the function fails in an unrecoverable way.
*/
PKIX_Error *
PKIX_ResourceLimits_GetMaxNumberOfCRLs(
PKIX_ResourceLimits *resourceLimits,
PKIX_UInt32 *pMaxNumber,
void *plContext);
/*
* FUNCTION: PKIX_ResourceLimits_SetMaxNumberOfCRLs
* DESCRIPTION:
*
* Sets the maximum number of traversed CRLs of the ResourceLimits object
* pointed to by "resourceLimits" using the PKIX_UInt32 value of "maxNumber".
* This maximum number of traversed CRLs should not be exceeded by the function
* whose ProcessingParams contain this ResourceLimits object (typically ValidateChain
* or BuildChain). If the builder traverses more than this number of CRLs
* during the build process, it should abort and return an Error. This parameter
* is only relevant for ValidateChain if it needs to internally call BuildChain
* (e.g. in order to build the chain to a CRL's issuer).
*
* PARAMETERS:
* "resourceLimits"
* Address of ResourceLimits object whose maximum number of traversed CRLs
* is to be set. Must be non-NULL.
* "maxNumber"
* Value of PKIX_UInt32 representing the maximum number of traversed CRLs
* "plContext"
* Platform-specific context pointer.
* THREAD SAFETY:
* Not Thread Safe - assumes exclusive access to "params"
* (see Thread Safety Definitions in Programmer's Guide)
* RETURNS:
* Returns NULL if the function succeeds.
* Returns a ResourceLimits Error if the function fails in a non-fatal way.
* Returns a Fatal Error if the function fails in an unrecoverable way.
*/
PKIX_Error *
PKIX_ResourceLimits_SetMaxNumberOfCRLs(
PKIX_ResourceLimits *resourceLimits,
PKIX_UInt32 maxNumber,
void *plContext);
#ifdef __cplusplus
}
#endif
#endif /* _PKIX_PARAMS_H */