RetroZilla/security/nss/lib/pkcs7/secpkcs7.h

627 lines
23 KiB
C
Raw Normal View History

2015-10-21 05:03:22 +02:00
/* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is the Netscape security libraries.
*
* The Initial Developer of the Original Code is
* Netscape Communications Corporation.
* Portions created by the Initial Developer are Copyright (C) 1994-2000
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
*
* Alternatively, the contents of this file may be used under the terms of
* either the GNU General Public License Version 2 or later (the "GPL"), or
* the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
/*
* Interface to the PKCS7 implementation.
*
* $Id: secpkcs7.h,v 1.6 2008/06/14 14:20:25 wtc%google.com Exp $
*/
#ifndef _SECPKCS7_H_
#define _SECPKCS7_H_
#include "seccomon.h"
#include "secoidt.h"
#include "certt.h"
#include "keyt.h"
#include "hasht.h"
#include "pkcs7t.h"
extern const SEC_ASN1Template sec_PKCS7ContentInfoTemplate[];
/************************************************************************/
SEC_BEGIN_PROTOS
/************************************************************************
* Miscellaneous
************************************************************************/
/*
* Returns the content type of the given contentInfo.
*/
extern SECOidTag SEC_PKCS7ContentType (SEC_PKCS7ContentInfo *cinfo);
/*
* Destroy a PKCS7 contentInfo and all of its sub-pieces.
*/
extern void SEC_PKCS7DestroyContentInfo(SEC_PKCS7ContentInfo *contentInfo);
/*
* Copy a PKCS7 contentInfo. A Destroy is needed on *each* copy.
*/
extern SEC_PKCS7ContentInfo *
SEC_PKCS7CopyContentInfo(SEC_PKCS7ContentInfo *contentInfo);
/*
* Return a pointer to the actual content. In the case of those types
* which are encrypted, this returns the *plain* content.
*/
extern SECItem *SEC_PKCS7GetContent(SEC_PKCS7ContentInfo *cinfo);
/************************************************************************
* PKCS7 Decoding, Verification, etc..
************************************************************************/
extern SEC_PKCS7DecoderContext *
SEC_PKCS7DecoderStart(SEC_PKCS7DecoderContentCallback callback,
void *callback_arg,
SECKEYGetPasswordKey pwfn, void *pwfn_arg,
SEC_PKCS7GetDecryptKeyCallback decrypt_key_cb,
void *decrypt_key_cb_arg,
SEC_PKCS7DecryptionAllowedCallback decrypt_allowed_cb);
extern SECStatus
SEC_PKCS7DecoderUpdate(SEC_PKCS7DecoderContext *p7dcx,
const char *buf, unsigned long len);
extern SEC_PKCS7ContentInfo *
SEC_PKCS7DecoderFinish(SEC_PKCS7DecoderContext *p7dcx);
/* Abort the underlying ASN.1 stream & set an error */
void SEC_PKCS7DecoderAbort(SEC_PKCS7DecoderContext *p7dcx, int error);
extern SEC_PKCS7ContentInfo *
SEC_PKCS7DecodeItem(SECItem *p7item,
SEC_PKCS7DecoderContentCallback cb, void *cb_arg,
SECKEYGetPasswordKey pwfn, void *pwfn_arg,
SEC_PKCS7GetDecryptKeyCallback decrypt_key_cb,
void *decrypt_key_cb_arg,
SEC_PKCS7DecryptionAllowedCallback decrypt_allowed_cb);
extern PRBool SEC_PKCS7ContainsCertsOrCrls(SEC_PKCS7ContentInfo *cinfo);
/* checks to see if the contents of the content info is
* empty. it so, PR_TRUE is returned. PR_FALSE, otherwise.
*
* minLen is used to specify a minimum size. if content size <= minLen,
* content is assumed empty.
*/
extern PRBool
SEC_PKCS7IsContentEmpty(SEC_PKCS7ContentInfo *cinfo, unsigned int minLen);
extern PRBool SEC_PKCS7ContentIsEncrypted(SEC_PKCS7ContentInfo *cinfo);
/*
* If the PKCS7 content has a signature (not just *could* have a signature)
* return true; false otherwise. This can/should be called before calling
* VerifySignature, which will always indicate failure if no signature is
* present, but that does not mean there even was a signature!
* Note that the content itself can be empty (detached content was sent
* another way); it is the presence of the signature that matters.
*/
extern PRBool SEC_PKCS7ContentIsSigned(SEC_PKCS7ContentInfo *cinfo);
/*
* SEC_PKCS7VerifySignature
* Look at a PKCS7 contentInfo and check if the signature is good.
* The verification checks that the signing cert is valid and trusted
* for the purpose specified by "certusage".
*
* In addition, if "keepcerts" is true, add any new certificates found
* into our local database.
*/
extern PRBool SEC_PKCS7VerifySignature(SEC_PKCS7ContentInfo *cinfo,
SECCertUsage certusage,
PRBool keepcerts);
/*
* SEC_PKCS7VerifyDetachedSignature
* Look at a PKCS7 contentInfo and check if the signature matches
* a passed-in digest (calculated, supposedly, from detached contents).
* The verification checks that the signing cert is valid and trusted
* for the purpose specified by "certusage".
*
* In addition, if "keepcerts" is true, add any new certificates found
* into our local database.
*/
extern PRBool SEC_PKCS7VerifyDetachedSignature(SEC_PKCS7ContentInfo *cinfo,
SECCertUsage certusage,
SECItem *detached_digest,
HASH_HashType digest_type,
PRBool keepcerts);
/*
* SEC_PKCS7GetSignerCommonName, SEC_PKCS7GetSignerEmailAddress
* The passed-in contentInfo is espected to be Signed, and these
* functions return the specified portion of the full signer name.
*
* Returns a pointer to allocated memory, which must be freed.
* A NULL return value is an error.
*/
extern char *SEC_PKCS7GetSignerCommonName(SEC_PKCS7ContentInfo *cinfo);
extern char *SEC_PKCS7GetSignerEmailAddress(SEC_PKCS7ContentInfo *cinfo);
/*
* Return the the signing time, in UTCTime format, of a PKCS7 contentInfo.
*/
extern SECItem *SEC_PKCS7GetSigningTime(SEC_PKCS7ContentInfo *cinfo);
/************************************************************************
* PKCS7 Creation and Encoding.
************************************************************************/
/*
* Start a PKCS7 signing context.
*
* "cert" is the cert that will be used to sign the data. It will be
* checked for validity.
*
* "certusage" describes the signing usage (e.g. certUsageEmailSigner)
* XXX Maybe SECCertUsage should be split so that our caller just says
* "email" and *we* add the "signing" part -- otherwise our caller
* could be lying about the usage; we do not want to allow encryption
* certs for signing or vice versa.
*
* "certdb" is the cert database to use for verifying the cert.
* It can be NULL if a default database is available (like in the client).
*
* "digestalg" names the digest algorithm (e.g. SEC_OID_SHA1).
*
* "digest" is the actual digest of the data. It must be provided in
* the case of detached data or NULL if the content will be included.
*
* The return value can be passed to functions which add things to
* it like attributes, then eventually to SEC_PKCS7Encode() or to
* SEC_PKCS7EncoderStart() to create the encoded data, and finally to
* SEC_PKCS7DestroyContentInfo().
*
* An error results in a return value of NULL and an error set.
* (Retrieve specific errors via PORT_GetError()/XP_GetError().)
*/
extern SEC_PKCS7ContentInfo *
SEC_PKCS7CreateSignedData (CERTCertificate *cert,
SECCertUsage certusage,
CERTCertDBHandle *certdb,
SECOidTag digestalg,
SECItem *digest,
SECKEYGetPasswordKey pwfn, void *pwfn_arg);
/*
* Create a PKCS7 certs-only container.
*
* "cert" is the (first) cert that will be included.
*
* "include_chain" specifies whether the entire chain for "cert" should
* be included.
*
* "certdb" is the cert database to use for finding the chain.
* It can be NULL in when "include_chain" is false, or when meaning
* use the default database.
*
* More certs and chains can be added via AddCertficate and AddCertChain.
*
* An error results in a return value of NULL and an error set.
* (Retrieve specific errors via PORT_GetError()/XP_GetError().)
*/
extern SEC_PKCS7ContentInfo *
SEC_PKCS7CreateCertsOnly (CERTCertificate *cert,
PRBool include_chain,
CERTCertDBHandle *certdb);
/*
* Start a PKCS7 enveloping context.
*
* "cert" is the cert for the recipient. It will be checked for validity.
*
* "certusage" describes the encryption usage (e.g. certUsageEmailRecipient)
* XXX Maybe SECCertUsage should be split so that our caller just says
* "email" and *we* add the "recipient" part -- otherwise our caller
* could be lying about the usage; we do not want to allow encryption
* certs for signing or vice versa.
*
* "certdb" is the cert database to use for verifying the cert.
* It can be NULL if a default database is available (like in the client).
*
* "encalg" specifies the bulk encryption algorithm to use (e.g. SEC_OID_RC2).
*
* "keysize" specifies the bulk encryption key size, in bits.
*
* The return value can be passed to functions which add things to
* it like more recipients, then eventually to SEC_PKCS7Encode() or to
* SEC_PKCS7EncoderStart() to create the encoded data, and finally to
* SEC_PKCS7DestroyContentInfo().
*
* An error results in a return value of NULL and an error set.
* (Retrieve specific errors via PORT_GetError()/XP_GetError().)
*/
extern SEC_PKCS7ContentInfo *
SEC_PKCS7CreateEnvelopedData (CERTCertificate *cert,
SECCertUsage certusage,
CERTCertDBHandle *certdb,
SECOidTag encalg,
int keysize,
SECKEYGetPasswordKey pwfn, void *pwfn_arg);
/*
* XXX There will be a similar routine for creating signedAndEnvelopedData.
* But its parameters will be different and I have no plans to implement
* it any time soon because we have no current need for it.
*/
/*
* Create an empty PKCS7 data content info.
*
* An error results in a return value of NULL and an error set.
* (Retrieve specific errors via PORT_GetError()/XP_GetError().)
*/
extern SEC_PKCS7ContentInfo *SEC_PKCS7CreateData (void);
/*
* Create an empty PKCS7 encrypted content info.
*
* "algorithm" specifies the bulk encryption algorithm to use.
*
* An error results in a return value of NULL and an error set.
* (Retrieve specific errors via PORT_GetError()/XP_GetError().)
*/
extern SEC_PKCS7ContentInfo *
SEC_PKCS7CreateEncryptedData (SECOidTag algorithm, int keysize,
SECKEYGetPasswordKey pwfn, void *pwfn_arg);
/*
* All of the following things return SECStatus to signal success or failure.
* Failure should have a more specific error status available via
* PORT_GetError()/XP_GetError().
*/
/*
* Add the specified attribute to the authenticated (i.e. signed) attributes
* of "cinfo" -- "oidtag" describes the attribute and "value" is the
* value to be associated with it. NOTE! "value" must already be encoded;
* no interpretation of "oidtag" is done. Also, it is assumed that this
* signedData has only one signer -- if we ever need to add attributes
* when there is more than one signature, we need a way to specify *which*
* signature should get the attribute.
*
* XXX Technically, a signed attribute can have multiple values; if/when
* we ever need to support an attribute which takes multiple values, we
* either need to change this interface or create an AddSignedAttributeValue
* which can be called subsequently, and would then append a value.
*
* "cinfo" should be of type signedData (the only kind of pkcs7 data
* that is allowed authenticated attributes); SECFailure will be returned
* if it is not.
*/
extern SECStatus SEC_PKCS7AddSignedAttribute (SEC_PKCS7ContentInfo *cinfo,
SECOidTag oidtag,
SECItem *value);
/*
* Add "cert" and its entire chain to the set of certs included in "cinfo".
*
* "certdb" is the cert database to use for finding the chain.
* It can be NULL, meaning use the default database.
*
* "cinfo" should be of type signedData or signedAndEnvelopedData;
* SECFailure will be returned if it is not.
*/
extern SECStatus SEC_PKCS7AddCertChain (SEC_PKCS7ContentInfo *cinfo,
CERTCertificate *cert,
CERTCertDBHandle *certdb);
/*
* Add "cert" to the set of certs included in "cinfo".
*
* "cinfo" should be of type signedData or signedAndEnvelopedData;
* SECFailure will be returned if it is not.
*/
extern SECStatus SEC_PKCS7AddCertificate (SEC_PKCS7ContentInfo *cinfo,
CERTCertificate *cert);
/*
* Add another recipient to an encrypted message.
*
* "cinfo" should be of type envelopedData or signedAndEnvelopedData;
* SECFailure will be returned if it is not.
*
* "cert" is the cert for the recipient. It will be checked for validity.
*
* "certusage" describes the encryption usage (e.g. certUsageEmailRecipient)
* XXX Maybe SECCertUsage should be split so that our caller just says
* "email" and *we* add the "recipient" part -- otherwise our caller
* could be lying about the usage; we do not want to allow encryption
* certs for signing or vice versa.
*
* "certdb" is the cert database to use for verifying the cert.
* It can be NULL if a default database is available (like in the client).
*/
extern SECStatus SEC_PKCS7AddRecipient (SEC_PKCS7ContentInfo *cinfo,
CERTCertificate *cert,
SECCertUsage certusage,
CERTCertDBHandle *certdb);
/*
* Add the signing time to the authenticated (i.e. signed) attributes
* of "cinfo". This is expected to be included in outgoing signed
* messages for email (S/MIME) but is likely useful in other situations.
*
* This should only be added once; a second call will either do
* nothing or replace an old signing time with a newer one.
*
* XXX This will probably just shove the current time into "cinfo"
* but it will not actually get signed until the entire item is
* processed for encoding. Is this (expected to be small) delay okay?
*
* "cinfo" should be of type signedData (the only kind of pkcs7 data
* that is allowed authenticated attributes); SECFailure will be returned
* if it is not.
*/
extern SECStatus SEC_PKCS7AddSigningTime (SEC_PKCS7ContentInfo *cinfo);
/*
* Add the signer's symmetric capabilities to the authenticated
* (i.e. signed) attributes of "cinfo". This is expected to be
* included in outgoing signed messages for email (S/MIME).
*
* This can only be added once; a second call will return SECFailure.
*
* "cinfo" should be of type signedData or signedAndEnvelopedData;
* SECFailure will be returned if it is not.
*/
extern SECStatus SEC_PKCS7AddSymmetricCapabilities(SEC_PKCS7ContentInfo *cinfo);
/*
* Mark that the signer's certificate and its issuing chain should
* be included in the encoded data. This is expected to be used
* in outgoing signed messages for email (S/MIME).
*
* "certdb" is the cert database to use for finding the chain.
* It can be NULL, meaning use the default database.
*
* "cinfo" should be of type signedData or signedAndEnvelopedData;
* SECFailure will be returned if it is not.
*/
extern SECStatus SEC_PKCS7IncludeCertChain (SEC_PKCS7ContentInfo *cinfo,
CERTCertDBHandle *certdb);
/*
* Set the content; it will be included and also hashed and/or encrypted
* as appropriate. This is for in-memory content (expected to be "small")
* that will be included in the PKCS7 object. All others should stream the
* content through when encoding (see SEC_PKCS7Encoder{Start,Update,Finish}).
*
* "buf" points to data of length "len"; it will be copied.
*/
extern SECStatus SEC_PKCS7SetContent (SEC_PKCS7ContentInfo *cinfo,
const char *buf, unsigned long len);
/*
* Encode a PKCS7 object, in one shot. All necessary components
* of the object must already be specified. Either the data has
* already been included (via SetContent), or the data is detached,
* or there is no data at all (certs-only).
*
* "cinfo" specifies the object to be encoded.
*
* "outputfn" is where the encoded bytes will be passed.
*
* "outputarg" is an opaque argument to the above callback.
*
* "bulkkey" specifies the bulk encryption key to use. This argument
* can be NULL if no encryption is being done, or if the bulk key should
* be generated internally (usually the case for EnvelopedData but never
* for EncryptedData, which *must* provide a bulk encryption key).
*
* "pwfn" is a callback for getting the password which protects the
* private key of the signer. This argument can be NULL if it is known
* that no signing is going to be done.
*
* "pwfnarg" is an opaque argument to the above callback.
*/
extern SECStatus SEC_PKCS7Encode (SEC_PKCS7ContentInfo *cinfo,
SEC_PKCS7EncoderOutputCallback outputfn,
void *outputarg,
PK11SymKey *bulkkey,
SECKEYGetPasswordKey pwfn,
void *pwfnarg);
/*
* Encode a PKCS7 object, in one shot. All necessary components
* of the object must already be specified. Either the data has
* already been included (via SetContent), or the data is detached,
* or there is no data at all (certs-only). The output, rather than
* being passed to an output function as is done above, is all put
* into a SECItem.
*
* "pool" specifies a pool from which to allocate the result.
* It can be NULL, in which case memory is allocated generically.
*
* "dest" specifies a SECItem in which to put the result data.
* It can be NULL, in which case the entire item is allocated, too.
*
* "cinfo" specifies the object to be encoded.
*
* "bulkkey" specifies the bulk encryption key to use. This argument
* can be NULL if no encryption is being done, or if the bulk key should
* be generated internally (usually the case for EnvelopedData but never
* for EncryptedData, which *must* provide a bulk encryption key).
*
* "pwfn" is a callback for getting the password which protects the
* private key of the signer. This argument can be NULL if it is known
* that no signing is going to be done.
*
* "pwfnarg" is an opaque argument to the above callback.
*/
extern SECItem *SEC_PKCS7EncodeItem (PLArenaPool *pool,
SECItem *dest,
SEC_PKCS7ContentInfo *cinfo,
PK11SymKey *bulkkey,
SECKEYGetPasswordKey pwfn,
void *pwfnarg);
/*
* For those who want to simply point to the pkcs7 contentInfo ASN.1
* template, and *not* call the encoding functions directly, the
* following function can be used -- after it is called, the entire
* PKCS7 contentInfo is ready to be encoded.
*/
extern SECStatus SEC_PKCS7PrepareForEncode (SEC_PKCS7ContentInfo *cinfo,
PK11SymKey *bulkkey,
SECKEYGetPasswordKey pwfn,
void *pwfnarg);
/*
* Start the process of encoding a PKCS7 object. The first part of
* the encoded object will be passed to the output function right away;
* after that it is expected that SEC_PKCS7EncoderUpdate will be called,
* streaming in the actual content that is getting included as well as
* signed or encrypted (or both).
*
* "cinfo" specifies the object to be encoded.
*
* "outputfn" is where the encoded bytes will be passed.
*
* "outputarg" is an opaque argument to the above callback.
*
* "bulkkey" specifies the bulk encryption key to use. This argument
* can be NULL if no encryption is being done, or if the bulk key should
* be generated internally (usually the case for EnvelopedData but never
* for EncryptedData, which *must* provide a bulk encryption key).
*
* Returns an object to be passed to EncoderUpdate and EncoderFinish.
*/
extern SEC_PKCS7EncoderContext *
SEC_PKCS7EncoderStart (SEC_PKCS7ContentInfo *cinfo,
SEC_PKCS7EncoderOutputCallback outputfn,
void *outputarg,
PK11SymKey *bulkkey);
/*
* Encode more contents, hashing and/or encrypting along the way.
*/
extern SECStatus SEC_PKCS7EncoderUpdate (SEC_PKCS7EncoderContext *p7ecx,
const char *buf,
unsigned long len);
/*
* No more contents; finish the signature creation, if appropriate,
* and then the encoding.
*
* "pwfn" is a callback for getting the password which protects the
* signer's private key. This argument can be NULL if it is known
* that no signing is going to be done.
*
* "pwfnarg" is an opaque argument to the above callback.
*/
extern SECStatus SEC_PKCS7EncoderFinish (SEC_PKCS7EncoderContext *p7ecx,
SECKEYGetPasswordKey pwfn,
void *pwfnarg);
/* Abort the underlying ASN.1 stream & set an error */
void SEC_PKCS7EncoderAbort(SEC_PKCS7EncoderContext *p7dcx, int error);
/* retrieve the algorithm ID used to encrypt the content info
* for encrypted and enveloped data. The SECAlgorithmID pointer
* returned needs to be freed as it is a copy of the algorithm
* id in the content info.
*/
extern SECAlgorithmID *
SEC_PKCS7GetEncryptionAlgorithm(SEC_PKCS7ContentInfo *cinfo);
/* the content of an encrypted data content info is encrypted.
* it is assumed that for encrypted data, that the data has already
* been set and is in the "plainContent" field of the content info.
*
* cinfo is the content info to encrypt
*
* key is the key with which to perform the encryption. if the
* algorithm is a password based encryption algorithm, the
* key is actually a password which will be processed per
* PKCS #5.
*
* in the event of an error, SECFailure is returned. SECSuccess
* indicates a success.
*/
extern SECStatus
SEC_PKCS7EncryptContents(PLArenaPool *poolp,
SEC_PKCS7ContentInfo *cinfo,
SECItem *key,
void *wincx);
/* the content of an encrypted data content info is decrypted.
* it is assumed that for encrypted data, that the data has already
* been set and is in the "encContent" field of the content info.
*
* cinfo is the content info to decrypt
*
* key is the key with which to perform the decryption. if the
* algorithm is a password based encryption algorithm, the
* key is actually a password which will be processed per
* PKCS #5.
*
* in the event of an error, SECFailure is returned. SECSuccess
* indicates a success.
*/
extern SECStatus
SEC_PKCS7DecryptContents(PLArenaPool *poolp,
SEC_PKCS7ContentInfo *cinfo,
SECItem *key,
void *wincx);
/* retrieve the certificate list from the content info. the list
* is a pointer to the list in the content info. this should not
* be deleted or freed in any way short of calling
* SEC_PKCS7DestroyContentInfo
*/
extern SECItem **
SEC_PKCS7GetCertificateList(SEC_PKCS7ContentInfo *cinfo);
/* Returns the key length (in bits) of the algorithm used to encrypt
this object. Returns 0 if it's not encrypted, or the key length is
irrelevant. */
extern int
SEC_PKCS7GetKeyLength(SEC_PKCS7ContentInfo *cinfo);
/************************************************************************/
SEC_END_PROTOS
#endif /* _SECPKCS7_H_ */