RetroZilla/security/nss/lib/certhigh/ocsp.c

5549 lines
170 KiB
C
Raw Normal View History

2015-10-21 05:03:22 +02:00
/* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is the Netscape security libraries.
*
* The Initial Developer of the Original Code is
* Netscape Communications Corporation.
* Portions created by the Initial Developer are Copyright (C) 1994-2000
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
* Kai Engert (kengert@redhat.com)
*
* Alternatively, the contents of this file may be used under the terms of
* either the GNU General Public License Version 2 or later (the "GPL"), or
* the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
/*
* Implementation of OCSP services, for both client and server.
* (XXX, really, mostly just for client right now, but intended to do both.)
*
* $Id: ocsp.c,v 1.58 2009/03/21 01:40:35 nelson%bolyard.com Exp $
*/
#include "prerror.h"
#include "prprf.h"
#include "plarena.h"
#include "prnetdb.h"
#include "seccomon.h"
#include "secitem.h"
#include "secoidt.h"
#include "secasn1.h"
#include "secder.h"
#include "cert.h"
#include "xconst.h"
#include "secerr.h"
#include "secoid.h"
#include "hasht.h"
#include "sechash.h"
#include "secasn1.h"
#include "keyhi.h"
#include "cryptohi.h"
#include "ocsp.h"
#include "ocspti.h"
#include "ocspi.h"
#include "genname.h"
#include "certxutl.h"
#include "pk11func.h" /* for PK11_HashBuf */
#include <stdarg.h>
#include <plhash.h>
#define DEFAULT_OCSP_CACHE_SIZE 1000
#define DEFAULT_MINIMUM_SECONDS_TO_NEXT_OCSP_FETCH_ATTEMPT 1*60*60L
#define DEFAULT_MAXIMUM_SECONDS_TO_NEXT_OCSP_FETCH_ATTEMPT 24*60*60L
#define DEFAULT_OSCP_TIMEOUT_SECONDS 60
#define MICROSECONDS_PER_SECOND 1000000L
typedef struct OCSPCacheItemStr OCSPCacheItem;
typedef struct OCSPCacheDataStr OCSPCacheData;
struct OCSPCacheItemStr {
/* LRU linking */
OCSPCacheItem *moreRecent;
OCSPCacheItem *lessRecent;
/* key */
CERTOCSPCertID *certID;
/* CertID's arena also used to allocate "this" cache item */
/* cache control information */
PRTime nextFetchAttemptTime;
/* Cached contents. Use a separate arena, because lifetime is different */
PRArenaPool *certStatusArena; /* NULL means: no cert status cached */
ocspCertStatus certStatus;
/* This may contain an error code when no OCSP response is available. */
SECErrorCodes missingResponseError;
PRPackedBool haveThisUpdate;
PRPackedBool haveNextUpdate;
PRTime thisUpdate;
PRTime nextUpdate;
};
struct OCSPCacheDataStr {
PLHashTable *entries;
PRUint32 numberOfEntries;
OCSPCacheItem *MRUitem; /* most recently used cache item */
OCSPCacheItem *LRUitem; /* least recently used cache item */
};
static struct OCSPGlobalStruct {
PRMonitor *monitor;
const SEC_HttpClientFcn *defaultHttpClientFcn;
PRInt32 maxCacheEntries;
PRUint32 minimumSecondsToNextFetchAttempt;
PRUint32 maximumSecondsToNextFetchAttempt;
PRUint32 timeoutSeconds;
OCSPCacheData cache;
SEC_OcspFailureMode ocspFailureMode;
CERT_StringFromCertFcn alternateOCSPAIAFcn;
} OCSP_Global = { NULL,
NULL,
DEFAULT_OCSP_CACHE_SIZE,
DEFAULT_MINIMUM_SECONDS_TO_NEXT_OCSP_FETCH_ATTEMPT,
DEFAULT_MAXIMUM_SECONDS_TO_NEXT_OCSP_FETCH_ATTEMPT,
DEFAULT_OSCP_TIMEOUT_SECONDS,
{NULL, 0, NULL, NULL},
ocspMode_FailureIsVerificationFailure,
NULL
};
/* Forward declarations */
static SECItem *
ocsp_GetEncodedOCSPResponseFromRequest(PRArenaPool *arena,
CERTOCSPRequest *request,
char *location, int64 time,
PRBool addServiceLocator,
void *pwArg,
CERTOCSPRequest **pRequest);
static SECStatus
ocsp_GetOCSPStatusFromNetwork(CERTCertDBHandle *handle,
CERTOCSPCertID *certID,
CERTCertificate *cert,
int64 time,
void *pwArg,
PRBool *certIDWasConsumed,
SECStatus *rv_ocsp);
static SECStatus
ocsp_GetVerifiedSingleResponseForCertID(CERTCertDBHandle *handle,
CERTOCSPResponse *response,
CERTOCSPCertID *certID,
CERTCertificate *signerCert,
int64 time,
CERTOCSPSingleResponse **pSingleResponse);
#ifndef DEBUG
#define OCSP_TRACE(msg)
#define OCSP_TRACE_TIME(msg, time)
#define OCSP_TRACE_CERT(cert)
#define OCSP_TRACE_CERTID(certid)
#else
#define OCSP_TRACE(msg) ocsp_Trace msg
#define OCSP_TRACE_TIME(msg, time) ocsp_dumpStringWithTime(msg, time)
#define OCSP_TRACE_CERT(cert) dumpCertificate(cert)
#define OCSP_TRACE_CERTID(certid) dumpCertID(certid)
#if (defined(XP_UNIX) || defined(XP_WIN32) || defined(XP_BEOS) \
|| defined(XP_MACOSX)) && !defined(_WIN32_WCE)
#define NSS_HAVE_GETENV 1
#endif
static PRBool wantOcspTrace()
{
static PRBool firstTime = PR_TRUE;
static PRBool wantTrace = PR_FALSE;
#ifdef NSS_HAVE_GETENV
if (firstTime) {
char *ev = getenv("NSS_TRACE_OCSP");
if (ev && ev[0]) {
wantTrace = PR_TRUE;
}
firstTime = PR_FALSE;
}
#endif
return wantTrace;
}
static void
ocsp_Trace(const char *format, ...)
{
char buf[2000];
va_list args;
if (!wantOcspTrace())
return;
va_start(args, format);
PR_vsnprintf(buf, sizeof(buf), format, args);
va_end(args);
PR_LogPrint("%s", buf);
}
static void
ocsp_dumpStringWithTime(const char *str, int64 time)
{
PRExplodedTime timePrintable;
char timestr[256];
if (!wantOcspTrace())
return;
PR_ExplodeTime(time, PR_GMTParameters, &timePrintable);
if (PR_FormatTime(timestr, 256, "%a %b %d %H:%M:%S %Y", &timePrintable)) {
ocsp_Trace("OCSP %s %s\n", str, timestr);
}
}
static void
printHexString(const char *prefix, SECItem *hexval)
{
unsigned int i;
char *hexbuf = NULL;
for (i = 0; i < hexval->len; i++) {
if (i != hexval->len - 1) {
hexbuf = PR_sprintf_append(hexbuf, "%02x:", hexval->data[i]);
} else {
hexbuf = PR_sprintf_append(hexbuf, "%02x", hexval->data[i]);
}
}
if (hexbuf) {
ocsp_Trace("%s %s\n", prefix, hexbuf);
PR_smprintf_free(hexbuf);
}
}
static void
dumpCertificate(CERTCertificate *cert)
{
if (!wantOcspTrace())
return;
ocsp_Trace("OCSP ----------------\n");
ocsp_Trace("OCSP ## SUBJECT: %s\n", cert->subjectName);
{
int64 timeBefore, timeAfter;
PRExplodedTime beforePrintable, afterPrintable;
char beforestr[256], afterstr[256];
PRStatus rv1, rv2;
DER_DecodeTimeChoice(&timeBefore, &cert->validity.notBefore);
DER_DecodeTimeChoice(&timeAfter, &cert->validity.notAfter);
PR_ExplodeTime(timeBefore, PR_GMTParameters, &beforePrintable);
PR_ExplodeTime(timeAfter, PR_GMTParameters, &afterPrintable);
rv1 = PR_FormatTime(beforestr, 256, "%a %b %d %H:%M:%S %Y",
&beforePrintable);
rv2 = PR_FormatTime(afterstr, 256, "%a %b %d %H:%M:%S %Y",
&afterPrintable);
ocsp_Trace("OCSP ## VALIDITY: %s to %s\n", rv1 ? beforestr : "",
rv2 ? afterstr : "");
}
ocsp_Trace("OCSP ## ISSUER: %s\n", cert->issuerName);
printHexString("OCSP ## SERIAL NUMBER:", &cert->serialNumber);
}
static void
dumpCertID(CERTOCSPCertID *certID)
{
if (!wantOcspTrace())
return;
printHexString("OCSP certID issuer", &certID->issuerNameHash);
printHexString("OCSP certID serial", &certID->serialNumber);
}
#endif
SECStatus
SEC_RegisterDefaultHttpClient(const SEC_HttpClientFcn *fcnTable)
{
if (!OCSP_Global.monitor) {
PORT_SetError(SEC_ERROR_LIBRARY_FAILURE);
return SECFailure;
}
PR_EnterMonitor(OCSP_Global.monitor);
OCSP_Global.defaultHttpClientFcn = fcnTable;
PR_ExitMonitor(OCSP_Global.monitor);
return SECSuccess;
}
SECStatus
CERT_RegisterAlternateOCSPAIAInfoCallBack(
CERT_StringFromCertFcn newCallback,
CERT_StringFromCertFcn * oldCallback)
{
CERT_StringFromCertFcn old;
if (!OCSP_Global.monitor) {
PORT_SetError(SEC_ERROR_LIBRARY_FAILURE);
return SECFailure;
}
PR_EnterMonitor(OCSP_Global.monitor);
old = OCSP_Global.alternateOCSPAIAFcn;
OCSP_Global.alternateOCSPAIAFcn = newCallback;
PR_ExitMonitor(OCSP_Global.monitor);
if (oldCallback)
*oldCallback = old;
return SECSuccess;
}
static PLHashNumber PR_CALLBACK
ocsp_CacheKeyHashFunction(const void *key)
{
CERTOCSPCertID *cid = (CERTOCSPCertID *)key;
PLHashNumber hash = 0;
unsigned int i;
unsigned char *walk;
/* a very simple hash calculation for the initial coding phase */
walk = (unsigned char*)cid->issuerNameHash.data;
for (i=0; i < cid->issuerNameHash.len; ++i, ++walk) {
hash += *walk;
}
walk = (unsigned char*)cid->issuerKeyHash.data;
for (i=0; i < cid->issuerKeyHash.len; ++i, ++walk) {
hash += *walk;
}
walk = (unsigned char*)cid->serialNumber.data;
for (i=0; i < cid->serialNumber.len; ++i, ++walk) {
hash += *walk;
}
return hash;
}
static PRIntn PR_CALLBACK
ocsp_CacheKeyCompareFunction(const void *v1, const void *v2)
{
CERTOCSPCertID *cid1 = (CERTOCSPCertID *)v1;
CERTOCSPCertID *cid2 = (CERTOCSPCertID *)v2;
return (SECEqual == SECITEM_CompareItem(&cid1->issuerNameHash,
&cid2->issuerNameHash)
&& SECEqual == SECITEM_CompareItem(&cid1->issuerKeyHash,
&cid2->issuerKeyHash)
&& SECEqual == SECITEM_CompareItem(&cid1->serialNumber,
&cid2->serialNumber));
}
static SECStatus
ocsp_CopyRevokedInfo(PRArenaPool *arena, ocspCertStatus *dest,
ocspRevokedInfo *src)
{
SECStatus rv = SECFailure;
void *mark;
mark = PORT_ArenaMark(arena);
dest->certStatusInfo.revokedInfo =
(ocspRevokedInfo *) PORT_ArenaZAlloc(arena, sizeof(ocspRevokedInfo));
if (!dest->certStatusInfo.revokedInfo) {
goto loser;
}
rv = SECITEM_CopyItem(arena,
&dest->certStatusInfo.revokedInfo->revocationTime,
&src->revocationTime);
if (rv != SECSuccess) {
goto loser;
}
if (src->revocationReason) {
dest->certStatusInfo.revokedInfo->revocationReason =
SECITEM_ArenaDupItem(arena, src->revocationReason);
if (!dest->certStatusInfo.revokedInfo->revocationReason) {
goto loser;
}
} else {
dest->certStatusInfo.revokedInfo->revocationReason = NULL;
}
PORT_ArenaUnmark(arena, mark);
return SECSuccess;
loser:
PORT_ArenaRelease(arena, mark);
return SECFailure;
}
static SECStatus
ocsp_CopyCertStatus(PRArenaPool *arena, ocspCertStatus *dest,
ocspCertStatus*src)
{
SECStatus rv = SECFailure;
dest->certStatusType = src->certStatusType;
switch (src->certStatusType) {
case ocspCertStatus_good:
dest->certStatusInfo.goodInfo =
SECITEM_ArenaDupItem(arena, src->certStatusInfo.goodInfo);
if (dest->certStatusInfo.goodInfo != NULL) {
rv = SECSuccess;
}
break;
case ocspCertStatus_revoked:
rv = ocsp_CopyRevokedInfo(arena, dest,
src->certStatusInfo.revokedInfo);
break;
case ocspCertStatus_unknown:
dest->certStatusInfo.unknownInfo =
SECITEM_ArenaDupItem(arena, src->certStatusInfo.unknownInfo);
if (dest->certStatusInfo.unknownInfo != NULL) {
rv = SECSuccess;
}
break;
case ocspCertStatus_other:
default:
PORT_Assert(src->certStatusType == ocspCertStatus_other);
dest->certStatusInfo.otherInfo =
SECITEM_ArenaDupItem(arena, src->certStatusInfo.otherInfo);
if (dest->certStatusInfo.otherInfo != NULL) {
rv = SECSuccess;
}
break;
}
return rv;
}
static void
ocsp_AddCacheItemToLinkedList(OCSPCacheData *cache, OCSPCacheItem *new_most_recent)
{
PR_EnterMonitor(OCSP_Global.monitor);
if (!cache->LRUitem) {
cache->LRUitem = new_most_recent;
}
new_most_recent->lessRecent = cache->MRUitem;
new_most_recent->moreRecent = NULL;
if (cache->MRUitem) {
cache->MRUitem->moreRecent = new_most_recent;
}
cache->MRUitem = new_most_recent;
PR_ExitMonitor(OCSP_Global.monitor);
}
static void
ocsp_RemoveCacheItemFromLinkedList(OCSPCacheData *cache, OCSPCacheItem *item)
{
PR_EnterMonitor(OCSP_Global.monitor);
if (!item->lessRecent && !item->moreRecent) {
/*
* Fail gracefully on attempts to remove an item from the list,
* which is currently not part of the list.
* But check for the edge case it is the single entry in the list.
*/
if (item == cache->LRUitem &&
item == cache->MRUitem) {
/* remove the single entry */
PORT_Assert(cache->numberOfEntries == 1);
PORT_Assert(item->moreRecent == NULL);
cache->MRUitem = NULL;
cache->LRUitem = NULL;
}
PR_ExitMonitor(OCSP_Global.monitor);
return;
}
PORT_Assert(cache->numberOfEntries > 1);
if (item == cache->LRUitem) {
PORT_Assert(item != cache->MRUitem);
PORT_Assert(item->lessRecent == NULL);
PORT_Assert(item->moreRecent != NULL);
PORT_Assert(item->moreRecent->lessRecent == item);
cache->LRUitem = item->moreRecent;
cache->LRUitem->lessRecent = NULL;
}
else if (item == cache->MRUitem) {
PORT_Assert(item->moreRecent == NULL);
PORT_Assert(item->lessRecent != NULL);
PORT_Assert(item->lessRecent->moreRecent == item);
cache->MRUitem = item->lessRecent;
cache->MRUitem->moreRecent = NULL;
} else {
/* remove an entry in the middle of the list */
PORT_Assert(item->moreRecent != NULL);
PORT_Assert(item->lessRecent != NULL);
PORT_Assert(item->lessRecent->moreRecent == item);
PORT_Assert(item->moreRecent->lessRecent == item);
item->moreRecent->lessRecent = item->lessRecent;
item->lessRecent->moreRecent = item->moreRecent;
}
item->lessRecent = NULL;
item->moreRecent = NULL;
PR_ExitMonitor(OCSP_Global.monitor);
}
static void
ocsp_MakeCacheEntryMostRecent(OCSPCacheData *cache, OCSPCacheItem *new_most_recent)
{
OCSP_TRACE(("OCSP ocsp_MakeCacheEntryMostRecent THREADID %p\n",
PR_GetCurrentThread()));
PR_EnterMonitor(OCSP_Global.monitor);
if (cache->MRUitem == new_most_recent) {
OCSP_TRACE(("OCSP ocsp_MakeCacheEntryMostRecent ALREADY MOST\n"));
PR_ExitMonitor(OCSP_Global.monitor);
return;
}
OCSP_TRACE(("OCSP ocsp_MakeCacheEntryMostRecent NEW entry\n"));
ocsp_RemoveCacheItemFromLinkedList(cache, new_most_recent);
ocsp_AddCacheItemToLinkedList(cache, new_most_recent);
PR_ExitMonitor(OCSP_Global.monitor);
}
static PRBool
ocsp_IsCacheDisabled()
{
/*
* maxCacheEntries == 0 means unlimited cache entries
* maxCacheEntries < 0 means cache is disabled
*/
PRBool retval;
PR_EnterMonitor(OCSP_Global.monitor);
retval = (OCSP_Global.maxCacheEntries < 0);
PR_ExitMonitor(OCSP_Global.monitor);
return retval;
}
static OCSPCacheItem *
ocsp_FindCacheEntry(OCSPCacheData *cache, CERTOCSPCertID *certID)
{
OCSPCacheItem *found_ocsp_item = NULL;
OCSP_TRACE(("OCSP ocsp_FindCacheEntry\n"));
OCSP_TRACE_CERTID(certID);
PR_EnterMonitor(OCSP_Global.monitor);
if (ocsp_IsCacheDisabled())
goto loser;
found_ocsp_item = (OCSPCacheItem *)PL_HashTableLookup(
cache->entries, certID);
if (!found_ocsp_item)
goto loser;
OCSP_TRACE(("OCSP ocsp_FindCacheEntry FOUND!\n"));
ocsp_MakeCacheEntryMostRecent(cache, found_ocsp_item);
loser:
PR_ExitMonitor(OCSP_Global.monitor);
return found_ocsp_item;
}
static void
ocsp_FreeCacheItem(OCSPCacheItem *item)
{
OCSP_TRACE(("OCSP ocsp_FreeCacheItem\n"));
if (item->certStatusArena) {
PORT_FreeArena(item->certStatusArena, PR_FALSE);
}
if (item->certID->poolp) {
/* freeing this poolp arena will also free item */
PORT_FreeArena(item->certID->poolp, PR_FALSE);
}
}
static void
ocsp_RemoveCacheItem(OCSPCacheData *cache, OCSPCacheItem *item)
{
/* The item we're removing could be either the least recently used item,
* or it could be an item that couldn't get updated with newer status info
* because of an allocation failure, or it could get removed because we're
* cleaning up.
*/
PRBool couldRemoveFromHashTable;
OCSP_TRACE(("OCSP ocsp_RemoveCacheItem, THREADID %p\n", PR_GetCurrentThread()));
PR_EnterMonitor(OCSP_Global.monitor);
ocsp_RemoveCacheItemFromLinkedList(cache, item);
couldRemoveFromHashTable = PL_HashTableRemove(cache->entries,
item->certID);
PORT_Assert(couldRemoveFromHashTable);
--cache->numberOfEntries;
ocsp_FreeCacheItem(item);
PR_ExitMonitor(OCSP_Global.monitor);
}
static void
ocsp_CheckCacheSize(OCSPCacheData *cache)
{
OCSP_TRACE(("OCSP ocsp_CheckCacheSize\n"));
PR_EnterMonitor(OCSP_Global.monitor);
if (OCSP_Global.maxCacheEntries <= 0) /* disabled or unlimited */
return;
while (cache->numberOfEntries > OCSP_Global.maxCacheEntries) {
ocsp_RemoveCacheItem(cache, cache->LRUitem);
}
PR_ExitMonitor(OCSP_Global.monitor);
}
SECStatus
CERT_ClearOCSPCache()
{
OCSP_TRACE(("OCSP CERT_ClearOCSPCache\n"));
PR_EnterMonitor(OCSP_Global.monitor);
while (OCSP_Global.cache.numberOfEntries > 0) {
ocsp_RemoveCacheItem(&OCSP_Global.cache,
OCSP_Global.cache.LRUitem);
}
PR_ExitMonitor(OCSP_Global.monitor);
return SECSuccess;
}
static SECStatus
ocsp_CreateCacheItemAndConsumeCertID(OCSPCacheData *cache,
CERTOCSPCertID *certID,
OCSPCacheItem **pCacheItem)
{
PRArenaPool *arena;
void *mark;
PLHashEntry *new_hash_entry;
OCSPCacheItem *item;
PORT_Assert(pCacheItem != NULL);
*pCacheItem = NULL;
PR_EnterMonitor(OCSP_Global.monitor);
arena = certID->poolp;
mark = PORT_ArenaMark(arena);
/* ZAlloc will init all Bools to False and all Pointers to NULL
and all error codes to zero/good. */
item = (OCSPCacheItem *)PORT_ArenaZAlloc(certID->poolp,
sizeof(OCSPCacheItem));
if (!item) {
goto loser;
}
item->certID = certID;
new_hash_entry = PL_HashTableAdd(cache->entries, item->certID,
item);
if (!new_hash_entry) {
goto loser;
}
++cache->numberOfEntries;
PORT_ArenaUnmark(arena, mark);
ocsp_AddCacheItemToLinkedList(cache, item);
*pCacheItem = item;
PR_ExitMonitor(OCSP_Global.monitor);
return SECSuccess;
loser:
PORT_ArenaRelease(arena, mark);
PR_ExitMonitor(OCSP_Global.monitor);
return SECFailure;
}
static SECStatus
ocsp_SetCacheItemResponse(OCSPCacheItem *item,
const CERTOCSPSingleResponse *response)
{
if (item->certStatusArena) {
PORT_FreeArena(item->certStatusArena, PR_FALSE);
item->certStatusArena = NULL;
}
item->haveThisUpdate = item->haveNextUpdate = PR_FALSE;
if (response) {
SECStatus rv;
item->certStatusArena = PORT_NewArena(DER_DEFAULT_CHUNKSIZE);
if (item->certStatusArena == NULL) {
return SECFailure;
}
rv = ocsp_CopyCertStatus(item->certStatusArena, &item->certStatus,
response->certStatus);
if (rv != SECSuccess) {
PORT_FreeArena(item->certStatusArena, PR_FALSE);
item->certStatusArena = NULL;
return rv;
}
item->missingResponseError = 0;
rv = DER_GeneralizedTimeToTime(&item->thisUpdate,
&response->thisUpdate);
item->haveThisUpdate = (rv == SECSuccess);
if (response->nextUpdate) {
rv = DER_GeneralizedTimeToTime(&item->nextUpdate,
response->nextUpdate);
item->haveNextUpdate = (rv == SECSuccess);
} else {
item->haveNextUpdate = PR_FALSE;
}
}
return SECSuccess;
}
static void
ocsp_FreshenCacheItemNextFetchAttemptTime(OCSPCacheItem *cacheItem)
{
PRTime now;
PRTime earliestAllowedNextFetchAttemptTime;
PRTime latestTimeWhenResponseIsConsideredFresh;
OCSP_TRACE(("OCSP ocsp_FreshenCacheItemNextFetchAttemptTime\n"));
PR_EnterMonitor(OCSP_Global.monitor);
now = PR_Now();
OCSP_TRACE_TIME("now:", now);
if (cacheItem->haveThisUpdate) {
OCSP_TRACE_TIME("thisUpdate:", cacheItem->thisUpdate);
latestTimeWhenResponseIsConsideredFresh = cacheItem->thisUpdate +
OCSP_Global.maximumSecondsToNextFetchAttempt *
MICROSECONDS_PER_SECOND;
OCSP_TRACE_TIME("latestTimeWhenResponseIsConsideredFresh:",
latestTimeWhenResponseIsConsideredFresh);
} else {
latestTimeWhenResponseIsConsideredFresh = now +
OCSP_Global.minimumSecondsToNextFetchAttempt *
MICROSECONDS_PER_SECOND;
OCSP_TRACE_TIME("no thisUpdate, "
"latestTimeWhenResponseIsConsideredFresh:",
latestTimeWhenResponseIsConsideredFresh);
}
if (cacheItem->haveNextUpdate) {
OCSP_TRACE_TIME("have nextUpdate:", cacheItem->thisUpdate);
}
if (cacheItem->haveNextUpdate &&
cacheItem->nextUpdate < latestTimeWhenResponseIsConsideredFresh) {
latestTimeWhenResponseIsConsideredFresh = cacheItem->nextUpdate;
OCSP_TRACE_TIME("nextUpdate is smaller than latestFresh, setting "
"latestTimeWhenResponseIsConsideredFresh:",
latestTimeWhenResponseIsConsideredFresh);
}
earliestAllowedNextFetchAttemptTime = now +
OCSP_Global.minimumSecondsToNextFetchAttempt *
MICROSECONDS_PER_SECOND;
OCSP_TRACE_TIME("earliestAllowedNextFetchAttemptTime:",
earliestAllowedNextFetchAttemptTime);
if (latestTimeWhenResponseIsConsideredFresh <
earliestAllowedNextFetchAttemptTime) {
latestTimeWhenResponseIsConsideredFresh =
earliestAllowedNextFetchAttemptTime;
OCSP_TRACE_TIME("latest < earliest, setting latest to:",
latestTimeWhenResponseIsConsideredFresh);
}
cacheItem->nextFetchAttemptTime =
latestTimeWhenResponseIsConsideredFresh;
OCSP_TRACE_TIME("nextFetchAttemptTime",
latestTimeWhenResponseIsConsideredFresh);
PR_ExitMonitor(OCSP_Global.monitor);
}
static PRBool
ocsp_IsCacheItemFresh(OCSPCacheItem *cacheItem)
{
PRTime now;
PRBool retval;
PR_EnterMonitor(OCSP_Global.monitor);
now = PR_Now();
retval = (cacheItem->nextFetchAttemptTime > now);
OCSP_TRACE(("OCSP ocsp_IsCacheItemFresh: %d\n", retval));
PR_ExitMonitor(OCSP_Global.monitor);
return retval;
}
/*
* Status in *certIDWasConsumed will always be correct, regardless of
* return value.
*/
static SECStatus
ocsp_CreateOrUpdateCacheEntry(OCSPCacheData *cache,
CERTOCSPCertID *certID,
CERTOCSPSingleResponse *single,
PRBool *certIDWasConsumed)
{
SECStatus rv;
OCSPCacheItem *cacheItem;
OCSP_TRACE(("OCSP ocsp_CreateOrUpdateCacheEntry\n"));
if (!certIDWasConsumed) {
PORT_SetError(SEC_ERROR_INVALID_ARGS);
return SECFailure;
}
*certIDWasConsumed = PR_FALSE;
PR_EnterMonitor(OCSP_Global.monitor);
PORT_Assert(OCSP_Global.maxCacheEntries >= 0);
cacheItem = ocsp_FindCacheEntry(cache, certID);
if (!cacheItem) {
rv = ocsp_CreateCacheItemAndConsumeCertID(cache, certID,
&cacheItem);
if (rv != SECSuccess) {
PR_ExitMonitor(OCSP_Global.monitor);
return rv;
}
*certIDWasConsumed = PR_TRUE;
}
if (single) {
rv = ocsp_SetCacheItemResponse(cacheItem, single);
if (rv != SECSuccess) {
ocsp_RemoveCacheItem(cache, cacheItem);
PR_ExitMonitor(OCSP_Global.monitor);
return rv;
}
} else {
cacheItem->missingResponseError = PORT_GetError();
}
ocsp_FreshenCacheItemNextFetchAttemptTime(cacheItem);
ocsp_CheckCacheSize(cache);
PR_ExitMonitor(OCSP_Global.monitor);
return SECSuccess;
}
extern SECStatus
CERT_SetOCSPFailureMode(SEC_OcspFailureMode ocspFailureMode)
{
switch (ocspFailureMode) {
case ocspMode_FailureIsVerificationFailure:
case ocspMode_FailureIsNotAVerificationFailure:
break;
default:
PORT_SetError(SEC_ERROR_INVALID_ARGS);
return SECFailure;
}
PR_EnterMonitor(OCSP_Global.monitor);
OCSP_Global.ocspFailureMode = ocspFailureMode;
PR_ExitMonitor(OCSP_Global.monitor);
return SECSuccess;
}
SECStatus
CERT_OCSPCacheSettings(PRInt32 maxCacheEntries,
PRUint32 minimumSecondsToNextFetchAttempt,
PRUint32 maximumSecondsToNextFetchAttempt)
{
if (minimumSecondsToNextFetchAttempt > maximumSecondsToNextFetchAttempt
|| maxCacheEntries < -1) {
PORT_SetError(SEC_ERROR_INVALID_ARGS);
return SECFailure;
}
PR_EnterMonitor(OCSP_Global.monitor);
if (maxCacheEntries < 0) {
OCSP_Global.maxCacheEntries = -1; /* disable cache */
} else if (maxCacheEntries == 0) {
OCSP_Global.maxCacheEntries = 0; /* unlimited cache entries */
} else {
OCSP_Global.maxCacheEntries = maxCacheEntries;
}
if (minimumSecondsToNextFetchAttempt <
OCSP_Global.minimumSecondsToNextFetchAttempt
|| maximumSecondsToNextFetchAttempt <
OCSP_Global.maximumSecondsToNextFetchAttempt) {
/*
* Ensure our existing cache entries are not used longer than the
* new settings allow, we're lazy and just clear the cache
*/
CERT_ClearOCSPCache();
}
OCSP_Global.minimumSecondsToNextFetchAttempt =
minimumSecondsToNextFetchAttempt;
OCSP_Global.maximumSecondsToNextFetchAttempt =
maximumSecondsToNextFetchAttempt;
ocsp_CheckCacheSize(&OCSP_Global.cache);
PR_ExitMonitor(OCSP_Global.monitor);
return SECSuccess;
}
SECStatus
CERT_SetOCSPTimeout(PRUint32 seconds)
{
/* no locking, see bug 406120 */
OCSP_Global.timeoutSeconds = seconds;
return SECSuccess;
}
/* this function is called at NSS initialization time */
SECStatus OCSP_InitGlobal(void)
{
SECStatus rv = SECFailure;
if (OCSP_Global.monitor == NULL) {
OCSP_Global.monitor = PR_NewMonitor();
}
if (!OCSP_Global.monitor)
return SECFailure;
PR_EnterMonitor(OCSP_Global.monitor);
if (!OCSP_Global.cache.entries) {
OCSP_Global.cache.entries =
PL_NewHashTable(0,
ocsp_CacheKeyHashFunction,
ocsp_CacheKeyCompareFunction,
PL_CompareValues,
NULL,
NULL);
OCSP_Global.ocspFailureMode = ocspMode_FailureIsVerificationFailure;
OCSP_Global.cache.numberOfEntries = 0;
OCSP_Global.cache.MRUitem = NULL;
OCSP_Global.cache.LRUitem = NULL;
} else {
/*
* NSS might call this function twice while attempting to init.
* But it's not allowed to call this again after any activity.
*/
PORT_Assert(OCSP_Global.cache.numberOfEntries == 0);
PORT_SetError(SEC_ERROR_LIBRARY_FAILURE);
}
if (OCSP_Global.cache.entries)
rv = SECSuccess;
PR_ExitMonitor(OCSP_Global.monitor);
return rv;
}
SECStatus OCSP_ShutdownGlobal(void)
{
if (!OCSP_Global.monitor)
return SECSuccess;
PR_EnterMonitor(OCSP_Global.monitor);
if (OCSP_Global.cache.entries) {
CERT_ClearOCSPCache();
PL_HashTableDestroy(OCSP_Global.cache.entries);
OCSP_Global.cache.entries = NULL;
}
PORT_Assert(OCSP_Global.cache.numberOfEntries == 0);
OCSP_Global.cache.MRUitem = NULL;
OCSP_Global.cache.LRUitem = NULL;
OCSP_Global.defaultHttpClientFcn = NULL;
OCSP_Global.maxCacheEntries = DEFAULT_OCSP_CACHE_SIZE;
OCSP_Global.minimumSecondsToNextFetchAttempt =
DEFAULT_MINIMUM_SECONDS_TO_NEXT_OCSP_FETCH_ATTEMPT;
OCSP_Global.maximumSecondsToNextFetchAttempt =
DEFAULT_MAXIMUM_SECONDS_TO_NEXT_OCSP_FETCH_ATTEMPT;
OCSP_Global.ocspFailureMode =
ocspMode_FailureIsVerificationFailure;
PR_ExitMonitor(OCSP_Global.monitor);
PR_DestroyMonitor(OCSP_Global.monitor);
OCSP_Global.monitor = NULL;
return SECSuccess;
}
/*
* A return value of NULL means:
* The application did not register it's own HTTP client.
*/
const SEC_HttpClientFcn *SEC_GetRegisteredHttpClient()
{
const SEC_HttpClientFcn *retval;
if (!OCSP_Global.monitor) {
PORT_SetError(SEC_ERROR_LIBRARY_FAILURE);
return NULL;
}
PR_EnterMonitor(OCSP_Global.monitor);
retval = OCSP_Global.defaultHttpClientFcn;
PR_ExitMonitor(OCSP_Global.monitor);
return retval;
}
/*
* The following structure is only used internally. It is allocated when
* someone turns on OCSP checking, and hangs off of the status-configuration
* structure in the certdb structure. We use it to keep configuration
* information specific to OCSP checking.
*/
typedef struct ocspCheckingContextStr {
PRBool useDefaultResponder;
char *defaultResponderURI;
char *defaultResponderNickname;
CERTCertificate *defaultResponderCert;
} ocspCheckingContext;
SEC_ASN1_MKSUB(SEC_AnyTemplate)
SEC_ASN1_MKSUB(SEC_IntegerTemplate)
SEC_ASN1_MKSUB(SEC_NullTemplate)
SEC_ASN1_MKSUB(SEC_OctetStringTemplate)
SEC_ASN1_MKSUB(SEC_PointerToAnyTemplate)
SEC_ASN1_MKSUB(SECOID_AlgorithmIDTemplate)
SEC_ASN1_MKSUB(SEC_SequenceOfAnyTemplate)
SEC_ASN1_MKSUB(SEC_PointerToGeneralizedTimeTemplate)
SEC_ASN1_MKSUB(SEC_PointerToEnumeratedTemplate)
/*
* Forward declarations of sub-types, so I can lay out the types in the
* same order as the ASN.1 is laid out in the OCSP spec itself.
*
* These are in alphabetical order (case-insensitive); please keep it that way!
*/
extern const SEC_ASN1Template ocsp_CertIDTemplate[];
extern const SEC_ASN1Template ocsp_PointerToSignatureTemplate[];
extern const SEC_ASN1Template ocsp_PointerToResponseBytesTemplate[];
extern const SEC_ASN1Template ocsp_ResponseDataTemplate[];
extern const SEC_ASN1Template ocsp_RevokedInfoTemplate[];
extern const SEC_ASN1Template ocsp_SingleRequestTemplate[];
extern const SEC_ASN1Template ocsp_SingleResponseTemplate[];
extern const SEC_ASN1Template ocsp_TBSRequestTemplate[];
/*
* Request-related templates...
*/
/*
* OCSPRequest ::= SEQUENCE {
* tbsRequest TBSRequest,
* optionalSignature [0] EXPLICIT Signature OPTIONAL }
*/
static const SEC_ASN1Template ocsp_OCSPRequestTemplate[] = {
{ SEC_ASN1_SEQUENCE,
0, NULL, sizeof(CERTOCSPRequest) },
{ SEC_ASN1_POINTER,
offsetof(CERTOCSPRequest, tbsRequest),
ocsp_TBSRequestTemplate },
{ SEC_ASN1_OPTIONAL | SEC_ASN1_EXPLICIT |
SEC_ASN1_CONSTRUCTED | SEC_ASN1_CONTEXT_SPECIFIC | 0,
offsetof(CERTOCSPRequest, optionalSignature),
ocsp_PointerToSignatureTemplate },
{ 0 }
};
/*
* TBSRequest ::= SEQUENCE {
* version [0] EXPLICIT Version DEFAULT v1,
* requestorName [1] EXPLICIT GeneralName OPTIONAL,
* requestList SEQUENCE OF Request,
* requestExtensions [2] EXPLICIT Extensions OPTIONAL }
*
* Version ::= INTEGER { v1(0) }
*
* Note: this should be static but the AIX compiler doesn't like it (because it
* was forward-declared above); it is not meant to be exported, but this
* is the only way it will compile.
*/
const SEC_ASN1Template ocsp_TBSRequestTemplate[] = {
{ SEC_ASN1_SEQUENCE,
0, NULL, sizeof(ocspTBSRequest) },
{ SEC_ASN1_OPTIONAL | SEC_ASN1_EXPLICIT | /* XXX DER_DEFAULT */
SEC_ASN1_CONSTRUCTED | SEC_ASN1_CONTEXT_SPECIFIC | SEC_ASN1_XTRN | 0,
offsetof(ocspTBSRequest, version),
SEC_ASN1_SUB(SEC_IntegerTemplate) },
{ SEC_ASN1_OPTIONAL | SEC_ASN1_EXPLICIT |
SEC_ASN1_CONSTRUCTED | SEC_ASN1_CONTEXT_SPECIFIC | SEC_ASN1_XTRN | 1,
offsetof(ocspTBSRequest, derRequestorName),
SEC_ASN1_SUB(SEC_PointerToAnyTemplate) },
{ SEC_ASN1_SEQUENCE_OF,
offsetof(ocspTBSRequest, requestList),
ocsp_SingleRequestTemplate },
{ SEC_ASN1_OPTIONAL | SEC_ASN1_EXPLICIT |
SEC_ASN1_CONSTRUCTED | SEC_ASN1_CONTEXT_SPECIFIC | 2,
offsetof(ocspTBSRequest, requestExtensions),
CERT_SequenceOfCertExtensionTemplate },
{ 0 }
};
/*
* Signature ::= SEQUENCE {
* signatureAlgorithm AlgorithmIdentifier,
* signature BIT STRING,
* certs [0] EXPLICIT SEQUENCE OF Certificate OPTIONAL }
*/
static const SEC_ASN1Template ocsp_SignatureTemplate[] = {
{ SEC_ASN1_SEQUENCE,
0, NULL, sizeof(ocspSignature) },
{ SEC_ASN1_INLINE | SEC_ASN1_XTRN,
offsetof(ocspSignature, signatureAlgorithm),
SEC_ASN1_SUB(SECOID_AlgorithmIDTemplate) },
{ SEC_ASN1_BIT_STRING,
offsetof(ocspSignature, signature) },
{ SEC_ASN1_OPTIONAL | SEC_ASN1_EXPLICIT |
SEC_ASN1_CONSTRUCTED | SEC_ASN1_CONTEXT_SPECIFIC | SEC_ASN1_XTRN | 0,
offsetof(ocspSignature, derCerts),
SEC_ASN1_SUB(SEC_SequenceOfAnyTemplate) },
{ 0 }
};
/*
* This template is just an extra level to use in an explicitly-tagged
* reference to a Signature.
*
* Note: this should be static but the AIX compiler doesn't like it (because it
* was forward-declared above); it is not meant to be exported, but this
* is the only way it will compile.
*/
const SEC_ASN1Template ocsp_PointerToSignatureTemplate[] = {
{ SEC_ASN1_POINTER, 0, ocsp_SignatureTemplate }
};
/*
* Request ::= SEQUENCE {
* reqCert CertID,
* singleRequestExtensions [0] EXPLICIT Extensions OPTIONAL }
*
* Note: this should be static but the AIX compiler doesn't like it (because it
* was forward-declared above); it is not meant to be exported, but this
* is the only way it will compile.
*/
const SEC_ASN1Template ocsp_SingleRequestTemplate[] = {
{ SEC_ASN1_SEQUENCE,
0, NULL, sizeof(ocspSingleRequest) },
{ SEC_ASN1_POINTER,
offsetof(ocspSingleRequest, reqCert),
ocsp_CertIDTemplate },
{ SEC_ASN1_OPTIONAL | SEC_ASN1_EXPLICIT |
SEC_ASN1_CONSTRUCTED | SEC_ASN1_CONTEXT_SPECIFIC | 0,
offsetof(ocspSingleRequest, singleRequestExtensions),
CERT_SequenceOfCertExtensionTemplate },
{ 0 }
};
/*
* This data structure and template (CertID) is used by both OCSP
* requests and responses. It is the only one that is shared.
*
* CertID ::= SEQUENCE {
* hashAlgorithm AlgorithmIdentifier,
* issuerNameHash OCTET STRING, -- Hash of Issuer DN
* issuerKeyHash OCTET STRING, -- Hash of Issuer public key
* serialNumber CertificateSerialNumber }
*
* CertificateSerialNumber ::= INTEGER
*
* Note: this should be static but the AIX compiler doesn't like it (because it
* was forward-declared above); it is not meant to be exported, but this
* is the only way it will compile.
*/
const SEC_ASN1Template ocsp_CertIDTemplate[] = {
{ SEC_ASN1_SEQUENCE,
0, NULL, sizeof(CERTOCSPCertID) },
{ SEC_ASN1_INLINE | SEC_ASN1_XTRN,
offsetof(CERTOCSPCertID, hashAlgorithm),
SEC_ASN1_SUB(SECOID_AlgorithmIDTemplate) },
{ SEC_ASN1_OCTET_STRING,
offsetof(CERTOCSPCertID, issuerNameHash) },
{ SEC_ASN1_OCTET_STRING,
offsetof(CERTOCSPCertID, issuerKeyHash) },
{ SEC_ASN1_INTEGER,
offsetof(CERTOCSPCertID, serialNumber) },
{ 0 }
};
/*
* Response-related templates...
*/
/*
* OCSPResponse ::= SEQUENCE {
* responseStatus OCSPResponseStatus,
* responseBytes [0] EXPLICIT ResponseBytes OPTIONAL }
*/
static const SEC_ASN1Template ocsp_OCSPResponseTemplate[] = {
{ SEC_ASN1_SEQUENCE,
0, NULL, sizeof(CERTOCSPResponse) },
{ SEC_ASN1_ENUMERATED,
offsetof(CERTOCSPResponse, responseStatus) },
{ SEC_ASN1_OPTIONAL | SEC_ASN1_EXPLICIT |
SEC_ASN1_CONSTRUCTED | SEC_ASN1_CONTEXT_SPECIFIC | 0,
offsetof(CERTOCSPResponse, responseBytes),
ocsp_PointerToResponseBytesTemplate },
{ 0 }
};
/*
* ResponseBytes ::= SEQUENCE {
* responseType OBJECT IDENTIFIER,
* response OCTET STRING }
*/
static const SEC_ASN1Template ocsp_ResponseBytesTemplate[] = {
{ SEC_ASN1_SEQUENCE,
0, NULL, sizeof(ocspResponseBytes) },
{ SEC_ASN1_OBJECT_ID,
offsetof(ocspResponseBytes, responseType) },
{ SEC_ASN1_OCTET_STRING,
offsetof(ocspResponseBytes, response) },
{ 0 }
};
/*
* This template is just an extra level to use in an explicitly-tagged
* reference to a ResponseBytes.
*
* Note: this should be static but the AIX compiler doesn't like it (because it
* was forward-declared above); it is not meant to be exported, but this
* is the only way it will compile.
*/
const SEC_ASN1Template ocsp_PointerToResponseBytesTemplate[] = {
{ SEC_ASN1_POINTER, 0, ocsp_ResponseBytesTemplate }
};
/*
* BasicOCSPResponse ::= SEQUENCE {
* tbsResponseData ResponseData,
* signatureAlgorithm AlgorithmIdentifier,
* signature BIT STRING,
* certs [0] EXPLICIT SEQUENCE OF Certificate OPTIONAL }
*/
static const SEC_ASN1Template ocsp_BasicOCSPResponseTemplate[] = {
{ SEC_ASN1_SEQUENCE,
0, NULL, sizeof(ocspBasicOCSPResponse) },
{ SEC_ASN1_ANY | SEC_ASN1_SAVE,
offsetof(ocspBasicOCSPResponse, tbsResponseDataDER) },
{ SEC_ASN1_POINTER,
offsetof(ocspBasicOCSPResponse, tbsResponseData),
ocsp_ResponseDataTemplate },
{ SEC_ASN1_INLINE | SEC_ASN1_XTRN,
offsetof(ocspBasicOCSPResponse, responseSignature.signatureAlgorithm),
SEC_ASN1_SUB(SECOID_AlgorithmIDTemplate) },
{ SEC_ASN1_BIT_STRING,
offsetof(ocspBasicOCSPResponse, responseSignature.signature) },
{ SEC_ASN1_OPTIONAL | SEC_ASN1_EXPLICIT |
SEC_ASN1_CONSTRUCTED | SEC_ASN1_CONTEXT_SPECIFIC | SEC_ASN1_XTRN | 0,
offsetof(ocspBasicOCSPResponse, responseSignature.derCerts),
SEC_ASN1_SUB(SEC_SequenceOfAnyTemplate) },
{ 0 }
};
/*
* ResponseData ::= SEQUENCE {
* version [0] EXPLICIT Version DEFAULT v1,
* responderID ResponderID,
* producedAt GeneralizedTime,
* responses SEQUENCE OF SingleResponse,
* responseExtensions [1] EXPLICIT Extensions OPTIONAL }
*
* Note: this should be static but the AIX compiler doesn't like it (because it
* was forward-declared above); it is not meant to be exported, but this
* is the only way it will compile.
*/
const SEC_ASN1Template ocsp_ResponseDataTemplate[] = {
{ SEC_ASN1_SEQUENCE,
0, NULL, sizeof(ocspResponseData) },
{ SEC_ASN1_OPTIONAL | SEC_ASN1_EXPLICIT | /* XXX DER_DEFAULT */
SEC_ASN1_CONSTRUCTED | SEC_ASN1_CONTEXT_SPECIFIC | SEC_ASN1_XTRN | 0,
offsetof(ocspResponseData, version),
SEC_ASN1_SUB(SEC_IntegerTemplate) },
{ SEC_ASN1_ANY,
offsetof(ocspResponseData, derResponderID) },
{ SEC_ASN1_GENERALIZED_TIME,
offsetof(ocspResponseData, producedAt) },
{ SEC_ASN1_SEQUENCE_OF,
offsetof(ocspResponseData, responses),
ocsp_SingleResponseTemplate },
{ SEC_ASN1_OPTIONAL | SEC_ASN1_EXPLICIT |
SEC_ASN1_CONSTRUCTED | SEC_ASN1_CONTEXT_SPECIFIC | 1,
offsetof(ocspResponseData, responseExtensions),
CERT_SequenceOfCertExtensionTemplate },
{ 0 }
};
/*
* ResponderID ::= CHOICE {
* byName [1] EXPLICIT Name,
* byKey [2] EXPLICIT KeyHash }
*
* KeyHash ::= OCTET STRING -- SHA-1 hash of responder's public key
* (excluding the tag and length fields)
*
* XXX Because the ASN.1 encoder and decoder currently do not provide
* a way to automatically handle a CHOICE, we need to do it in two
* steps, looking at the type tag and feeding the exact choice back
* to the ASN.1 code. Hopefully that will change someday and this
* can all be simplified down into a single template. Anyway, for
* now we list each choice as its own template:
*/
static const SEC_ASN1Template ocsp_ResponderIDByNameTemplate[] = {
{ SEC_ASN1_EXPLICIT | SEC_ASN1_CONSTRUCTED | SEC_ASN1_CONTEXT_SPECIFIC | 1,
offsetof(ocspResponderID, responderIDValue.name),
CERT_NameTemplate }
};
static const SEC_ASN1Template ocsp_ResponderIDByKeyTemplate[] = {
{ SEC_ASN1_EXPLICIT | SEC_ASN1_CONSTRUCTED | SEC_ASN1_CONTEXT_SPECIFIC |
SEC_ASN1_XTRN | 2,
offsetof(ocspResponderID, responderIDValue.keyHash),
SEC_ASN1_SUB(SEC_OctetStringTemplate) }
};
static const SEC_ASN1Template ocsp_ResponderIDOtherTemplate[] = {
{ SEC_ASN1_ANY,
offsetof(ocspResponderID, responderIDValue.other) }
};
/* Decode choice container, but leave x509 name object encoded */
static const SEC_ASN1Template ocsp_ResponderIDDerNameTemplate[] = {
{ SEC_ASN1_EXPLICIT | SEC_ASN1_CONSTRUCTED | SEC_ASN1_CONTEXT_SPECIFIC |
SEC_ASN1_XTRN | 1, 0, SEC_ASN1_SUB(SEC_AnyTemplate) }
};
/*
* SingleResponse ::= SEQUENCE {
* certID CertID,
* certStatus CertStatus,
* thisUpdate GeneralizedTime,
* nextUpdate [0] EXPLICIT GeneralizedTime OPTIONAL,
* singleExtensions [1] EXPLICIT Extensions OPTIONAL }
*
* Note: this should be static but the AIX compiler doesn't like it (because it
* was forward-declared above); it is not meant to be exported, but this
* is the only way it will compile.
*/
const SEC_ASN1Template ocsp_SingleResponseTemplate[] = {
{ SEC_ASN1_SEQUENCE,
0, NULL, sizeof(CERTOCSPSingleResponse) },
{ SEC_ASN1_POINTER,
offsetof(CERTOCSPSingleResponse, certID),
ocsp_CertIDTemplate },
{ SEC_ASN1_ANY,
offsetof(CERTOCSPSingleResponse, derCertStatus) },
{ SEC_ASN1_GENERALIZED_TIME,
offsetof(CERTOCSPSingleResponse, thisUpdate) },
{ SEC_ASN1_OPTIONAL | SEC_ASN1_EXPLICIT |
SEC_ASN1_CONSTRUCTED | SEC_ASN1_CONTEXT_SPECIFIC | SEC_ASN1_XTRN | 0,
offsetof(CERTOCSPSingleResponse, nextUpdate),
SEC_ASN1_SUB(SEC_PointerToGeneralizedTimeTemplate) },
{ SEC_ASN1_OPTIONAL | SEC_ASN1_EXPLICIT |
SEC_ASN1_CONSTRUCTED | SEC_ASN1_CONTEXT_SPECIFIC | 1,
offsetof(CERTOCSPSingleResponse, singleExtensions),
CERT_SequenceOfCertExtensionTemplate },
{ 0 }
};
/*
* CertStatus ::= CHOICE {
* good [0] IMPLICIT NULL,
* revoked [1] IMPLICIT RevokedInfo,
* unknown [2] IMPLICIT UnknownInfo }
*
* Because the ASN.1 encoder and decoder currently do not provide
* a way to automatically handle a CHOICE, we need to do it in two
* steps, looking at the type tag and feeding the exact choice back
* to the ASN.1 code. Hopefully that will change someday and this
* can all be simplified down into a single template. Anyway, for
* now we list each choice as its own template:
*/
static const SEC_ASN1Template ocsp_CertStatusGoodTemplate[] = {
{ SEC_ASN1_POINTER | SEC_ASN1_CONTEXT_SPECIFIC | SEC_ASN1_XTRN | 0,
offsetof(ocspCertStatus, certStatusInfo.goodInfo),
SEC_ASN1_SUB(SEC_NullTemplate) }
};
static const SEC_ASN1Template ocsp_CertStatusRevokedTemplate[] = {
{ SEC_ASN1_POINTER | SEC_ASN1_CONSTRUCTED | SEC_ASN1_CONTEXT_SPECIFIC | 1,
offsetof(ocspCertStatus, certStatusInfo.revokedInfo),
ocsp_RevokedInfoTemplate }
};
static const SEC_ASN1Template ocsp_CertStatusUnknownTemplate[] = {
{ SEC_ASN1_POINTER | SEC_ASN1_CONTEXT_SPECIFIC | SEC_ASN1_XTRN | 2,
offsetof(ocspCertStatus, certStatusInfo.unknownInfo),
SEC_ASN1_SUB(SEC_NullTemplate) }
};
static const SEC_ASN1Template ocsp_CertStatusOtherTemplate[] = {
{ SEC_ASN1_POINTER | SEC_ASN1_XTRN,
offsetof(ocspCertStatus, certStatusInfo.otherInfo),
SEC_ASN1_SUB(SEC_AnyTemplate) }
};
/*
* RevokedInfo ::= SEQUENCE {
* revocationTime GeneralizedTime,
* revocationReason [0] EXPLICIT CRLReason OPTIONAL }
*
* Note: this should be static but the AIX compiler doesn't like it (because it
* was forward-declared above); it is not meant to be exported, but this
* is the only way it will compile.
*/
const SEC_ASN1Template ocsp_RevokedInfoTemplate[] = {
{ SEC_ASN1_SEQUENCE,
0, NULL, sizeof(ocspRevokedInfo) },
{ SEC_ASN1_GENERALIZED_TIME,
offsetof(ocspRevokedInfo, revocationTime) },
{ SEC_ASN1_OPTIONAL | SEC_ASN1_EXPLICIT |
SEC_ASN1_CONSTRUCTED | SEC_ASN1_CONTEXT_SPECIFIC |
SEC_ASN1_XTRN | 0,
offsetof(ocspRevokedInfo, revocationReason),
SEC_ASN1_SUB(SEC_PointerToEnumeratedTemplate) },
{ 0 }
};
/*
* OCSP-specific extension templates:
*/
/*
* ServiceLocator ::= SEQUENCE {
* issuer Name,
* locator AuthorityInfoAccessSyntax OPTIONAL }
*/
static const SEC_ASN1Template ocsp_ServiceLocatorTemplate[] = {
{ SEC_ASN1_SEQUENCE,
0, NULL, sizeof(ocspServiceLocator) },
{ SEC_ASN1_POINTER,
offsetof(ocspServiceLocator, issuer),
CERT_NameTemplate },
{ SEC_ASN1_OPTIONAL | SEC_ASN1_ANY,
offsetof(ocspServiceLocator, locator) },
{ 0 }
};
/*
* REQUEST SUPPORT FUNCTIONS (encode/create/decode/destroy):
*/
/*
* FUNCTION: CERT_EncodeOCSPRequest
* DER encodes an OCSP Request, possibly adding a signature as well.
* XXX Signing is not yet supported, however; see comments in code.
* INPUTS:
* PRArenaPool *arena
* The return value is allocated from here.
* If a NULL is passed in, allocation is done from the heap instead.
* CERTOCSPRequest *request
* The request to be encoded.
* void *pwArg
* Pointer to argument for password prompting, if needed. (Definitely
* not needed if not signing.)
* RETURN:
* Returns a NULL on error and a pointer to the SECItem with the
* encoded value otherwise. Any error is likely to be low-level
* (e.g. no memory).
*/
SECItem *
CERT_EncodeOCSPRequest(PRArenaPool *arena, CERTOCSPRequest *request,
void *pwArg)
{
ocspTBSRequest *tbsRequest;
SECStatus rv;
/* XXX All of these should generate errors if they fail. */
PORT_Assert(request);
PORT_Assert(request->tbsRequest);
tbsRequest = request->tbsRequest;
if (request->tbsRequest->extensionHandle != NULL) {
rv = CERT_FinishExtensions(request->tbsRequest->extensionHandle);
request->tbsRequest->extensionHandle = NULL;
if (rv != SECSuccess)
return NULL;
}
/*
* XXX When signed requests are supported and request->optionalSignature
* is not NULL:
* - need to encode tbsRequest->requestorName
* - need to encode tbsRequest
* - need to sign that encoded result (using cert in sig), filling in the
* request->optionalSignature structure with the result, the signing
* algorithm and (perhaps?) the cert (and its chain?) in derCerts
*/
return SEC_ASN1EncodeItem(arena, NULL, request, ocsp_OCSPRequestTemplate);
}
/*
* FUNCTION: CERT_DecodeOCSPRequest
* Decode a DER encoded OCSP Request.
* INPUTS:
* SECItem *src
* Pointer to a SECItem holding DER encoded OCSP Request.
* RETURN:
* Returns a pointer to a CERTOCSPRequest containing the decoded request.
* On error, returns NULL. Most likely error is trouble decoding
* (SEC_ERROR_OCSP_MALFORMED_REQUEST), or low-level problem (no memory).
*/
CERTOCSPRequest *
CERT_DecodeOCSPRequest(SECItem *src)
{
PRArenaPool *arena = NULL;
SECStatus rv = SECFailure;
CERTOCSPRequest *dest = NULL;
int i;
SECItem newSrc;
arena = PORT_NewArena(DER_DEFAULT_CHUNKSIZE);
if (arena == NULL) {
goto loser;
}
dest = (CERTOCSPRequest *) PORT_ArenaZAlloc(arena,
sizeof(CERTOCSPRequest));
if (dest == NULL) {
goto loser;
}
dest->arena = arena;
/* copy the DER into the arena, since Quick DER returns data that points
into the DER input, which may get freed by the caller */
rv = SECITEM_CopyItem(arena, &newSrc, src);
if ( rv != SECSuccess ) {
goto loser;
}
rv = SEC_QuickDERDecodeItem(arena, dest, ocsp_OCSPRequestTemplate, &newSrc);
if (rv != SECSuccess) {
if (PORT_GetError() == SEC_ERROR_BAD_DER)
PORT_SetError(SEC_ERROR_OCSP_MALFORMED_REQUEST);
goto loser;
}
/*
* XXX I would like to find a way to get rid of the necessity
* of doing this copying of the arena pointer.
*/
for (i = 0; dest->tbsRequest->requestList[i] != NULL; i++) {
dest->tbsRequest->requestList[i]->arena = arena;
}
return dest;
loser:
if (arena != NULL) {
PORT_FreeArena(arena, PR_FALSE);
}
return NULL;
}
SECStatus
CERT_DestroyOCSPCertID(CERTOCSPCertID* certID)
{
if (certID && certID->poolp) {
PORT_FreeArena(certID->poolp, PR_FALSE);
return SECSuccess;
}
PORT_SetError(SEC_ERROR_INVALID_ARGS);
return SECFailure;
}
/*
* Digest data using the specified algorithm.
* The necessary storage for the digest data is allocated. If "fill" is
* non-null, the data is put there, otherwise a SECItem is allocated.
* Allocation from "arena" if it is non-null, heap otherwise. Any problem
* results in a NULL being returned (and an appropriate error set).
*/
static SECItem *
ocsp_DigestValue(PRArenaPool *arena, SECOidTag digestAlg,
SECItem *fill, const SECItem *src)
{
const SECHashObject *digestObject;
SECItem *result = NULL;
void *mark = NULL;
void *digestBuff = NULL;
if ( arena != NULL ) {
mark = PORT_ArenaMark(arena);
}
digestObject = HASH_GetHashObjectByOidTag(digestAlg);
if ( digestObject == NULL ) {
goto loser;
}
if (fill == NULL || fill->data == NULL) {
result = SECITEM_AllocItem(arena, fill, digestObject->length);
if ( result == NULL ) {
goto loser;
}
digestBuff = result->data;
} else {
if (fill->len < digestObject->length) {
PORT_SetError(SEC_ERROR_INVALID_ARGS);
goto loser;
}
digestBuff = fill->data;
}
if (PK11_HashBuf(digestAlg, digestBuff,
src->data, src->len) != SECSuccess) {
goto loser;
}
if ( arena != NULL ) {
PORT_ArenaUnmark(arena, mark);
}
if (result == NULL) {
result = fill;
}
return result;
loser:
if (arena != NULL) {
PORT_ArenaRelease(arena, mark);
} else {
if (result != NULL) {
SECITEM_FreeItem(result, (fill == NULL) ? PR_TRUE : PR_FALSE);
}
}
return(NULL);
}
/*
* Digest the cert's subject public key using the specified algorithm.
* The necessary storage for the digest data is allocated. If "fill" is
* non-null, the data is put there, otherwise a SECItem is allocated.
* Allocation from "arena" if it is non-null, heap otherwise. Any problem
* results in a NULL being returned (and an appropriate error set).
*/
SECItem *
CERT_GetSPKIDigest(PRArenaPool *arena, const CERTCertificate *cert,
SECOidTag digestAlg, SECItem *fill)
{
SECItem spk;
/*
* Copy just the length and data pointer (nothing needs to be freed)
* of the subject public key so we can convert the length from bits
* to bytes, which is what the digest function expects.
*/
spk = cert->subjectPublicKeyInfo.subjectPublicKey;
DER_ConvertBitString(&spk);
return ocsp_DigestValue(arena, digestAlg, fill, &spk);
}
/*
* Digest the cert's subject name using the specified algorithm.
*/
static SECItem *
cert_GetSubjectNameDigest(PRArenaPool *arena, const CERTCertificate *cert,
SECOidTag digestAlg, SECItem *fill)
{
SECItem name;
/*
* Copy just the length and data pointer (nothing needs to be freed)
* of the subject name
*/
name = cert->derSubject;
return ocsp_DigestValue(arena, digestAlg, fill, &name);
}
/*
* Create and fill-in a CertID. This function fills in the hash values
* (issuerNameHash and issuerKeyHash), and is hardwired to use SHA1.
* Someday it might need to be more flexible about hash algorithm, but
* for now we have no intention/need to create anything else.
*
* Error causes a null to be returned; most likely cause is trouble
* finding the certificate issuer (SEC_ERROR_UNKNOWN_ISSUER).
* Other errors are low-level problems (no memory, bad database, etc.).
*/
static CERTOCSPCertID *
ocsp_CreateCertID(PRArenaPool *arena, CERTCertificate *cert, int64 time)
{
CERTOCSPCertID *certID;
CERTCertificate *issuerCert = NULL;
void *mark = PORT_ArenaMark(arena);
SECStatus rv;
PORT_Assert(arena != NULL);
certID = PORT_ArenaZNew(arena, CERTOCSPCertID);
if (certID == NULL) {
goto loser;
}
rv = SECOID_SetAlgorithmID(arena, &certID->hashAlgorithm, SEC_OID_SHA1,
NULL);
if (rv != SECSuccess) {
goto loser;
}
issuerCert = CERT_FindCertIssuer(cert, time, certUsageAnyCA);
if (issuerCert == NULL) {
goto loser;
}
if (cert_GetSubjectNameDigest(arena, issuerCert, SEC_OID_SHA1,
&(certID->issuerNameHash)) == NULL) {
goto loser;
}
certID->issuerSHA1NameHash.data = certID->issuerNameHash.data;
certID->issuerSHA1NameHash.len = certID->issuerNameHash.len;
if (cert_GetSubjectNameDigest(arena, issuerCert, SEC_OID_MD5,
&(certID->issuerMD5NameHash)) == NULL) {
goto loser;
}
if (cert_GetSubjectNameDigest(arena, issuerCert, SEC_OID_MD2,
&(certID->issuerMD2NameHash)) == NULL) {
goto loser;
}
if (CERT_GetSPKIDigest(arena, issuerCert, SEC_OID_SHA1,
&(certID->issuerKeyHash)) == NULL) {
goto loser;
}
certID->issuerSHA1KeyHash.data = certID->issuerKeyHash.data;
certID->issuerSHA1KeyHash.len = certID->issuerKeyHash.len;
/* cache the other two hash algorithms as well */
if (CERT_GetSPKIDigest(arena, issuerCert, SEC_OID_MD5,
&(certID->issuerMD5KeyHash)) == NULL) {
goto loser;
}
if (CERT_GetSPKIDigest(arena, issuerCert, SEC_OID_MD2,
&(certID->issuerMD2KeyHash)) == NULL) {
goto loser;
}
/* now we are done with issuerCert */
CERT_DestroyCertificate(issuerCert);
issuerCert = NULL;
rv = SECITEM_CopyItem(arena, &certID->serialNumber, &cert->serialNumber);
if (rv != SECSuccess) {
goto loser;
}
PORT_ArenaUnmark(arena, mark);
return certID;
loser:
if (issuerCert != NULL) {
CERT_DestroyCertificate(issuerCert);
}
PORT_ArenaRelease(arena, mark);
return NULL;
}
CERTOCSPCertID*
CERT_CreateOCSPCertID(CERTCertificate *cert, int64 time)
{
PRArenaPool *arena = PORT_NewArena(DER_DEFAULT_CHUNKSIZE);
CERTOCSPCertID *certID;
PORT_Assert(arena != NULL);
if (!arena)
return NULL;
certID = ocsp_CreateCertID(arena, cert, time);
if (!certID) {
PORT_FreeArena(arena, PR_FALSE);
return NULL;
}
certID->poolp = arena;
return certID;
}
/*
* Callback to set Extensions in request object
*/
void SetSingleReqExts(void *object, CERTCertExtension **exts)
{
ocspSingleRequest *singleRequest =
(ocspSingleRequest *)object;
singleRequest->singleRequestExtensions = exts;
}
/*
* Add the Service Locator extension to the singleRequestExtensions
* for the given singleRequest.
*
* All errors are internal or low-level problems (e.g. no memory).
*/
static SECStatus
ocsp_AddServiceLocatorExtension(ocspSingleRequest *singleRequest,
CERTCertificate *cert)
{
ocspServiceLocator *serviceLocator = NULL;
void *extensionHandle = NULL;
SECStatus rv = SECFailure;
serviceLocator = PORT_ZNew(ocspServiceLocator);
if (serviceLocator == NULL)
goto loser;
/*
* Normally it would be a bad idea to do a direct reference like
* this rather than allocate and copy the name *or* at least dup
* a reference of the cert. But all we need is to be able to read
* the issuer name during the encoding we are about to do, so a
* copy is just a waste of time.
*/
serviceLocator->issuer = &cert->issuer;
rv = CERT_FindCertExtension(cert, SEC_OID_X509_AUTH_INFO_ACCESS,
&serviceLocator->locator);
if (rv != SECSuccess) {
if (PORT_GetError() != SEC_ERROR_EXTENSION_NOT_FOUND)
goto loser;
}
/* prepare for following loser gotos */
rv = SECFailure;
PORT_SetError(0);
extensionHandle = cert_StartExtensions(singleRequest,
singleRequest->arena, SetSingleReqExts);
if (extensionHandle == NULL)
goto loser;
rv = CERT_EncodeAndAddExtension(extensionHandle,
SEC_OID_PKIX_OCSP_SERVICE_LOCATOR,
serviceLocator, PR_FALSE,
ocsp_ServiceLocatorTemplate);
loser:
if (extensionHandle != NULL) {
/*
* Either way we have to finish out the extension context (so it gets
* freed). But careful not to override any already-set bad status.
*/
SECStatus tmprv = CERT_FinishExtensions(extensionHandle);
if (rv == SECSuccess)
rv = tmprv;
}
/*
* Finally, free the serviceLocator structure itself and we are done.
*/
if (serviceLocator != NULL) {
if (serviceLocator->locator.data != NULL)
SECITEM_FreeItem(&serviceLocator->locator, PR_FALSE);
PORT_Free(serviceLocator);
}
return rv;
}
/*
* Creates an array of ocspSingleRequest based on a list of certs.
* Note that the code which later compares the request list with the
* response expects this array to be in the exact same order as the
* certs are found in the list. It would be harder to change that
* order than preserve it, but since the requirement is not obvious,
* it deserves to be mentioned.
*
* Any problem causes a null return and error set:
* SEC_ERROR_UNKNOWN_ISSUER
* Other errors are low-level problems (no memory, bad database, etc.).
*/
static ocspSingleRequest **
ocsp_CreateSingleRequestList(PRArenaPool *arena, CERTCertList *certList,
int64 time, PRBool includeLocator)
{
ocspSingleRequest **requestList = NULL;
CERTCertListNode *node = NULL;
int i, count;
void *mark = PORT_ArenaMark(arena);
node = CERT_LIST_HEAD(certList);
for (count = 0; !CERT_LIST_END(node, certList); count++) {
node = CERT_LIST_NEXT(node);
}
if (count == 0)
goto loser;
requestList = PORT_ArenaNewArray(arena, ocspSingleRequest *, count + 1);
if (requestList == NULL)
goto loser;
node = CERT_LIST_HEAD(certList);
for (i = 0; !CERT_LIST_END(node, certList); i++) {
requestList[i] = PORT_ArenaZNew(arena, ocspSingleRequest);
if (requestList[i] == NULL)
goto loser;
OCSP_TRACE(("OCSP CERT_CreateOCSPRequest %s\n", node->cert->subjectName));
requestList[i]->arena = arena;
requestList[i]->reqCert = ocsp_CreateCertID(arena, node->cert, time);
if (requestList[i]->reqCert == NULL)
goto loser;
if (includeLocator == PR_TRUE) {
SECStatus rv;
rv = ocsp_AddServiceLocatorExtension(requestList[i], node->cert);
if (rv != SECSuccess)
goto loser;
}
node = CERT_LIST_NEXT(node);
}
PORT_Assert(i == count);
PORT_ArenaUnmark(arena, mark);
requestList[i] = NULL;
return requestList;
loser:
PORT_ArenaRelease(arena, mark);
return NULL;
}
static ocspSingleRequest **
ocsp_CreateRequestFromCert(PRArenaPool *arena,
CERTOCSPCertID *certID,
CERTCertificate *singleCert,
int64 time,
PRBool includeLocator)
{
ocspSingleRequest **requestList = NULL;
void *mark = PORT_ArenaMark(arena);
PORT_Assert(certID != NULL && singleCert != NULL);
/* meaning of value 2: one entry + one end marker */
requestList = PORT_ArenaNewArray(arena, ocspSingleRequest *, 2);
if (requestList == NULL)
goto loser;
requestList[0] = PORT_ArenaZNew(arena, ocspSingleRequest);
if (requestList[0] == NULL)
goto loser;
requestList[0]->arena = arena;
/* certID will live longer than the request */
requestList[0]->reqCert = certID;
if (includeLocator == PR_TRUE) {
SECStatus rv;
rv = ocsp_AddServiceLocatorExtension(requestList[0], singleCert);
if (rv != SECSuccess)
goto loser;
}
PORT_ArenaUnmark(arena, mark);
requestList[1] = NULL;
return requestList;
loser:
PORT_ArenaRelease(arena, mark);
return NULL;
}
static CERTOCSPRequest *
ocsp_prepareEmptyOCSPRequest()
{
PRArenaPool *arena = NULL;
CERTOCSPRequest *request = NULL;
ocspTBSRequest *tbsRequest = NULL;
arena = PORT_NewArena(DER_DEFAULT_CHUNKSIZE);
if (arena == NULL) {
goto loser;
}
request = PORT_ArenaZNew(arena, CERTOCSPRequest);
if (request == NULL) {
goto loser;
}
request->arena = arena;
tbsRequest = PORT_ArenaZNew(arena, ocspTBSRequest);
if (tbsRequest == NULL) {
goto loser;
}
request->tbsRequest = tbsRequest;
/* version 1 is the default, so we need not fill in a version number */
return request;
loser:
if (arena != NULL) {
PORT_FreeArena(arena, PR_FALSE);
}
return NULL;
}
CERTOCSPRequest *
cert_CreateSingleCertOCSPRequest(CERTOCSPCertID *certID,
CERTCertificate *singleCert,
int64 time,
PRBool addServiceLocator,
CERTCertificate *signerCert)
{
CERTOCSPRequest *request;
OCSP_TRACE(("OCSP cert_CreateSingleCertOCSPRequest %s\n", singleCert->subjectName));
/* XXX Support for signerCert may be implemented later,
* see also the comment in CERT_CreateOCSPRequest.
*/
if (signerCert != NULL) {
PORT_SetError(PR_NOT_IMPLEMENTED_ERROR);
return NULL;
}
request = ocsp_prepareEmptyOCSPRequest();
if (!request)
return NULL;
/*
* Version 1 is the default, so we need not fill in a version number.
* Now create the list of single requests, one for each cert.
*/
request->tbsRequest->requestList =
ocsp_CreateRequestFromCert(request->arena,
certID,
singleCert,
time,
addServiceLocator);
if (request->tbsRequest->requestList == NULL) {
PORT_FreeArena(request->arena, PR_FALSE);
return NULL;
}
return request;
}
/*
* FUNCTION: CERT_CreateOCSPRequest
* Creates a CERTOCSPRequest, requesting the status of the certs in
* the given list.
* INPUTS:
* CERTCertList *certList
* A list of certs for which status will be requested.
* Note that all of these certificates should have the same issuer,
* or it's expected the response will be signed by a trusted responder.
* If the certs need to be broken up into multiple requests, that
* must be handled by the caller (and thus by having multiple calls
* to this routine), who knows about where the request(s) are being
* sent and whether there are any trusted responders in place.
* int64 time
* Indicates the time for which the certificate status is to be
* determined -- this may be used in the search for the cert's issuer
* but has no effect on the request itself.
* PRBool addServiceLocator
* If true, the Service Locator extension should be added to the
* single request(s) for each cert.
* CERTCertificate *signerCert
* If non-NULL, means sign the request using this cert. Otherwise,
* do not sign.
* XXX note that request signing is not yet supported; see comment in code
* RETURN:
* A pointer to a CERTOCSPRequest structure containing an OCSP request
* for the cert list. On error, null is returned, with an error set
* indicating the reason. This is likely SEC_ERROR_UNKNOWN_ISSUER.
* (The issuer is needed to create a request for the certificate.)
* Other errors are low-level problems (no memory, bad database, etc.).
*/
CERTOCSPRequest *
CERT_CreateOCSPRequest(CERTCertList *certList, int64 time,
PRBool addServiceLocator,
CERTCertificate *signerCert)
{
CERTOCSPRequest *request = NULL;
if (!certList) {
PORT_SetError(SEC_ERROR_INVALID_ARGS);
return NULL;
}
/*
* XXX When we are prepared to put signing of requests back in,
* we will need to allocate a signature
* structure for the request, fill in the "derCerts" field in it,
* save the signerCert there, as well as fill in the "requestorName"
* field of the tbsRequest.
*/
if (signerCert != NULL) {
PORT_SetError(PR_NOT_IMPLEMENTED_ERROR);
return NULL;
}
request = ocsp_prepareEmptyOCSPRequest();
if (!request)
return NULL;
/*
* Now create the list of single requests, one for each cert.
*/
request->tbsRequest->requestList =
ocsp_CreateSingleRequestList(request->arena,
certList,
time,
addServiceLocator);
if (request->tbsRequest->requestList == NULL) {
PORT_FreeArena(request->arena, PR_FALSE);
return NULL;
}
return request;
}
/*
* FUNCTION: CERT_AddOCSPAcceptableResponses
* Add the AcceptableResponses extension to an OCSP Request.
* INPUTS:
* CERTOCSPRequest *request
* The request to which the extension should be added.
* ...
* A list (of one or more) of SECOidTag -- each of the response types
* to be added. The last OID *must* be SEC_OID_PKIX_OCSP_BASIC_RESPONSE.
* (This marks the end of the list, and it must be specified because a
* client conforming to the OCSP standard is required to handle the basic
* response type.) The OIDs are not checked in any way.
* RETURN:
* SECSuccess if the extension is added; SECFailure if anything goes wrong.
* All errors are internal or low-level problems (e.g. no memory).
*/
void SetRequestExts(void *object, CERTCertExtension **exts)
{
CERTOCSPRequest *request = (CERTOCSPRequest *)object;
request->tbsRequest->requestExtensions = exts;
}
SECStatus
CERT_AddOCSPAcceptableResponses(CERTOCSPRequest *request,
SECOidTag responseType0, ...)
{
void *extHandle;
va_list ap;
int i, count;
SECOidTag responseType;
SECOidData *responseOid;
SECItem **acceptableResponses = NULL;
SECStatus rv = SECFailure;
extHandle = request->tbsRequest->extensionHandle;
if (extHandle == NULL) {
extHandle = cert_StartExtensions(request, request->arena, SetRequestExts);
if (extHandle == NULL)
goto loser;
}
/* Count number of OIDS going into the extension value. */
count = 1;
if (responseType0 != SEC_OID_PKIX_OCSP_BASIC_RESPONSE) {
va_start(ap, responseType0);
do {
count++;
responseType = va_arg(ap, SECOidTag);
} while (responseType != SEC_OID_PKIX_OCSP_BASIC_RESPONSE);
va_end(ap);
}
acceptableResponses = PORT_NewArray(SECItem *, count + 1);
if (acceptableResponses == NULL)
goto loser;
i = 0;
responseOid = SECOID_FindOIDByTag(responseType0);
acceptableResponses[i++] = &(responseOid->oid);
if (count > 1) {
va_start(ap, responseType0);
for ( ; i < count; i++) {
responseType = va_arg(ap, SECOidTag);
responseOid = SECOID_FindOIDByTag(responseType);
acceptableResponses[i] = &(responseOid->oid);
}
va_end(ap);
}
acceptableResponses[i] = NULL;
rv = CERT_EncodeAndAddExtension(extHandle, SEC_OID_PKIX_OCSP_RESPONSE,
&acceptableResponses, PR_FALSE,
SEC_ASN1_GET(SEC_SequenceOfObjectIDTemplate));
if (rv != SECSuccess)
goto loser;
PORT_Free(acceptableResponses);
if (request->tbsRequest->extensionHandle == NULL)
request->tbsRequest->extensionHandle = extHandle;
return SECSuccess;
loser:
if (acceptableResponses != NULL)
PORT_Free(acceptableResponses);
if (extHandle != NULL)
(void) CERT_FinishExtensions(extHandle);
return rv;
}
/*
* FUNCTION: CERT_DestroyOCSPRequest
* Frees an OCSP Request structure.
* INPUTS:
* CERTOCSPRequest *request
* Pointer to CERTOCSPRequest to be freed.
* RETURN:
* No return value; no errors.
*/
void
CERT_DestroyOCSPRequest(CERTOCSPRequest *request)
{
if (request == NULL)
return;
if (request->tbsRequest != NULL) {
if (request->tbsRequest->requestorName != NULL)
CERT_DestroyGeneralNameList(request->tbsRequest->requestorName);
if (request->tbsRequest->extensionHandle != NULL)
(void) CERT_FinishExtensions(request->tbsRequest->extensionHandle);
}
if (request->optionalSignature != NULL) {
if (request->optionalSignature->cert != NULL)
CERT_DestroyCertificate(request->optionalSignature->cert);
/*
* XXX Need to free derCerts? Or do they come out of arena?
* (Currently we never fill in derCerts, which is why the
* answer is not obvious. Once we do, add any necessary code
* here and remove this comment.)
*/
}
/*
* We should actually never have a request without an arena,
* but check just in case. (If there isn't one, there is not
* much we can do about it...)
*/
PORT_Assert(request->arena != NULL);
if (request->arena != NULL)
PORT_FreeArena(request->arena, PR_FALSE);
}
/*
* RESPONSE SUPPORT FUNCTIONS (encode/create/decode/destroy):
*/
/*
* Helper function for encoding or decoding a ResponderID -- based on the
* given type, return the associated template for that choice.
*/
static const SEC_ASN1Template *
ocsp_ResponderIDTemplateByType(ocspResponderIDType responderIDType)
{
const SEC_ASN1Template *responderIDTemplate;
switch (responderIDType) {
case ocspResponderID_byName:
responderIDTemplate = ocsp_ResponderIDByNameTemplate;
break;
case ocspResponderID_byKey:
responderIDTemplate = ocsp_ResponderIDByKeyTemplate;
break;
case ocspResponderID_other:
default:
PORT_Assert(responderIDType == ocspResponderID_other);
responderIDTemplate = ocsp_ResponderIDOtherTemplate;
break;
}
return responderIDTemplate;
}
/*
* Helper function for encoding or decoding a CertStatus -- based on the
* given type, return the associated template for that choice.
*/
static const SEC_ASN1Template *
ocsp_CertStatusTemplateByType(ocspCertStatusType certStatusType)
{
const SEC_ASN1Template *certStatusTemplate;
switch (certStatusType) {
case ocspCertStatus_good:
certStatusTemplate = ocsp_CertStatusGoodTemplate;
break;
case ocspCertStatus_revoked:
certStatusTemplate = ocsp_CertStatusRevokedTemplate;
break;
case ocspCertStatus_unknown:
certStatusTemplate = ocsp_CertStatusUnknownTemplate;
break;
case ocspCertStatus_other:
default:
PORT_Assert(certStatusType == ocspCertStatus_other);
certStatusTemplate = ocsp_CertStatusOtherTemplate;
break;
}
return certStatusTemplate;
}
/*
* Helper function for decoding a certStatus -- turn the actual DER tag
* into our local translation.
*/
static ocspCertStatusType
ocsp_CertStatusTypeByTag(int derTag)
{
ocspCertStatusType certStatusType;
switch (derTag) {
case 0:
certStatusType = ocspCertStatus_good;
break;
case 1:
certStatusType = ocspCertStatus_revoked;
break;
case 2:
certStatusType = ocspCertStatus_unknown;
break;
default:
certStatusType = ocspCertStatus_other;
break;
}
return certStatusType;
}
/*
* Helper function for decoding SingleResponses -- they each contain
* a status which is encoded as CHOICE, which needs to be decoded "by hand".
*
* Note -- on error, this routine does not release the memory it may
* have allocated; it expects its caller to do that.
*/
static SECStatus
ocsp_FinishDecodingSingleResponses(PRArenaPool *reqArena,
CERTOCSPSingleResponse **responses)
{
ocspCertStatus *certStatus;
ocspCertStatusType certStatusType;
const SEC_ASN1Template *certStatusTemplate;
int derTag;
int i;
SECStatus rv = SECFailure;
if (!reqArena) {
PORT_SetError(SEC_ERROR_INVALID_ARGS);
return SECFailure;
}
if (responses == NULL) /* nothing to do */
return SECSuccess;
for (i = 0; responses[i] != NULL; i++) {
SECItem* newStatus;
/*
* The following assert points out internal errors (problems in
* the template definitions or in the ASN.1 decoder itself, etc.).
*/
PORT_Assert(responses[i]->derCertStatus.data != NULL);
derTag = responses[i]->derCertStatus.data[0] & SEC_ASN1_TAGNUM_MASK;
certStatusType = ocsp_CertStatusTypeByTag(derTag);
certStatusTemplate = ocsp_CertStatusTemplateByType(certStatusType);
certStatus = PORT_ArenaZAlloc(reqArena, sizeof(ocspCertStatus));
if (certStatus == NULL) {
goto loser;
}
newStatus = SECITEM_ArenaDupItem(reqArena, &responses[i]->derCertStatus);
if (!newStatus) {
goto loser;
}
rv = SEC_QuickDERDecodeItem(reqArena, certStatus, certStatusTemplate,
newStatus);
if (rv != SECSuccess) {
if (PORT_GetError() == SEC_ERROR_BAD_DER)
PORT_SetError(SEC_ERROR_OCSP_MALFORMED_RESPONSE);
goto loser;
}
certStatus->certStatusType = certStatusType;
responses[i]->certStatus = certStatus;
}
return SECSuccess;
loser:
return rv;
}
/*
* Helper function for decoding a responderID -- turn the actual DER tag
* into our local translation.
*/
static ocspResponderIDType
ocsp_ResponderIDTypeByTag(int derTag)
{
ocspResponderIDType responderIDType;
switch (derTag) {
case 1:
responderIDType = ocspResponderID_byName;
break;
case 2:
responderIDType = ocspResponderID_byKey;
break;
default:
responderIDType = ocspResponderID_other;
break;
}
return responderIDType;
}
/*
* Decode "src" as a BasicOCSPResponse, returning the result.
*/
static ocspBasicOCSPResponse *
ocsp_DecodeBasicOCSPResponse(PRArenaPool *arena, SECItem *src)
{
void *mark;
ocspBasicOCSPResponse *basicResponse;
ocspResponseData *responseData;
ocspResponderID *responderID;
ocspResponderIDType responderIDType;
const SEC_ASN1Template *responderIDTemplate;
int derTag;
SECStatus rv;
SECItem newsrc;
mark = PORT_ArenaMark(arena);
basicResponse = PORT_ArenaZAlloc(arena, sizeof(ocspBasicOCSPResponse));
if (basicResponse == NULL) {
goto loser;
}
/* copy the DER into the arena, since Quick DER returns data that points
into the DER input, which may get freed by the caller */
rv = SECITEM_CopyItem(arena, &newsrc, src);
if ( rv != SECSuccess ) {
goto loser;
}
rv = SEC_QuickDERDecodeItem(arena, basicResponse,
ocsp_BasicOCSPResponseTemplate, &newsrc);
if (rv != SECSuccess) {
if (PORT_GetError() == SEC_ERROR_BAD_DER)
PORT_SetError(SEC_ERROR_OCSP_MALFORMED_RESPONSE);
goto loser;
}
responseData = basicResponse->tbsResponseData;
/*
* The following asserts point out internal errors (problems in
* the template definitions or in the ASN.1 decoder itself, etc.).
*/
PORT_Assert(responseData != NULL);
PORT_Assert(responseData->derResponderID.data != NULL);
/*
* XXX Because responderID is a CHOICE, which is not currently handled
* by our ASN.1 decoder, we have to decode it "by hand".
*/
derTag = responseData->derResponderID.data[0] & SEC_ASN1_TAGNUM_MASK;
responderIDType = ocsp_ResponderIDTypeByTag(derTag);
responderIDTemplate = ocsp_ResponderIDTemplateByType(responderIDType);
responderID = PORT_ArenaZAlloc(arena, sizeof(ocspResponderID));
if (responderID == NULL) {
goto loser;
}
rv = SEC_QuickDERDecodeItem(arena, responderID, responderIDTemplate,
&responseData->derResponderID);
if (rv != SECSuccess) {
if (PORT_GetError() == SEC_ERROR_BAD_DER)
PORT_SetError(SEC_ERROR_OCSP_MALFORMED_RESPONSE);
goto loser;
}
responderID->responderIDType = responderIDType;
responseData->responderID = responderID;
/*
* XXX Each SingleResponse also contains a CHOICE, which has to be
* fixed up by hand.
*/
rv = ocsp_FinishDecodingSingleResponses(arena, responseData->responses);
if (rv != SECSuccess) {
goto loser;
}
PORT_ArenaUnmark(arena, mark);
return basicResponse;
loser:
PORT_ArenaRelease(arena, mark);
return NULL;
}
/*
* Decode the responseBytes based on the responseType found in "rbytes",
* leaving the resulting translated/decoded information in there as well.
*/
static SECStatus
ocsp_DecodeResponseBytes(PRArenaPool *arena, ocspResponseBytes *rbytes)
{
PORT_Assert(rbytes != NULL); /* internal error, really */
if (rbytes == NULL) {
PORT_SetError(SEC_ERROR_INVALID_ARGS); /* XXX set better error? */
return SECFailure;
}
rbytes->responseTypeTag = SECOID_FindOIDTag(&rbytes->responseType);
switch (rbytes->responseTypeTag) {
case SEC_OID_PKIX_OCSP_BASIC_RESPONSE:
{
ocspBasicOCSPResponse *basicResponse;
basicResponse = ocsp_DecodeBasicOCSPResponse(arena,
&rbytes->response);
if (basicResponse == NULL)
return SECFailure;
rbytes->decodedResponse.basic = basicResponse;
}
break;
/*
* Add new/future response types here.
*/
default:
PORT_SetError(SEC_ERROR_OCSP_UNKNOWN_RESPONSE_TYPE);
return SECFailure;
}
return SECSuccess;
}
/*
* FUNCTION: CERT_DecodeOCSPResponse
* Decode a DER encoded OCSP Response.
* INPUTS:
* SECItem *src
* Pointer to a SECItem holding DER encoded OCSP Response.
* RETURN:
* Returns a pointer to a CERTOCSPResponse (the decoded OCSP Response);
* the caller is responsible for destroying it. Or NULL if error (either
* response could not be decoded (SEC_ERROR_OCSP_MALFORMED_RESPONSE),
* it was of an unexpected type (SEC_ERROR_OCSP_UNKNOWN_RESPONSE_TYPE),
* or a low-level or internal error occurred).
*/
CERTOCSPResponse *
CERT_DecodeOCSPResponse(SECItem *src)
{
PRArenaPool *arena = NULL;
CERTOCSPResponse *response = NULL;
SECStatus rv = SECFailure;
ocspResponseStatus sv;
SECItem newSrc;
arena = PORT_NewArena(DER_DEFAULT_CHUNKSIZE);
if (arena == NULL) {
goto loser;
}
response = (CERTOCSPResponse *) PORT_ArenaZAlloc(arena,
sizeof(CERTOCSPResponse));
if (response == NULL) {
goto loser;
}
response->arena = arena;
/* copy the DER into the arena, since Quick DER returns data that points
into the DER input, which may get freed by the caller */
rv = SECITEM_CopyItem(arena, &newSrc, src);
if ( rv != SECSuccess ) {
goto loser;
}
rv = SEC_QuickDERDecodeItem(arena, response, ocsp_OCSPResponseTemplate, &newSrc);
if (rv != SECSuccess) {
if (PORT_GetError() == SEC_ERROR_BAD_DER)
PORT_SetError(SEC_ERROR_OCSP_MALFORMED_RESPONSE);
goto loser;
}
sv = (ocspResponseStatus) DER_GetInteger(&response->responseStatus);
response->statusValue = sv;
if (sv != ocspResponse_successful) {
/*
* If the response status is anything but successful, then we
* are all done with decoding; the status is all there is.
*/
return response;
}
/*
* A successful response contains much more information, still encoded.
* Now we need to decode that.
*/
rv = ocsp_DecodeResponseBytes(arena, response->responseBytes);
if (rv != SECSuccess) {
goto loser;
}
return response;
loser:
if (arena != NULL) {
PORT_FreeArena(arena, PR_FALSE);
}
return NULL;
}
/*
* The way an OCSPResponse is defined, there are many levels to descend
* before getting to the actual response information. And along the way
* we need to check that the response *type* is recognizable, which for
* now means that it is a BasicOCSPResponse, because that is the only
* type currently defined. Rather than force all routines to perform
* a bunch of sanity checking every time they want to work on a response,
* this function isolates that and gives back the interesting part.
* Note that no copying is done, this just returns a pointer into the
* substructure of the response which is passed in.
*
* XXX This routine only works when a valid response structure is passed
* into it; this is checked with many assertions. Assuming the response
* was creating by decoding, it wouldn't make it this far without being
* okay. That is a sufficient assumption since the entire OCSP interface
* is only used internally. When this interface is officially exported,
* each assertion below will need to be followed-up with setting an error
* and returning (null).
*
* FUNCTION: ocsp_GetResponseData
* Returns ocspResponseData structure and a pointer to tbs response
* data DER from a valid ocsp response.
* INPUTS:
* CERTOCSPResponse *response
* structure of a valid ocsp response
* RETURN:
* Returns a pointer to ocspResponseData structure: decoded OCSP response
* data, and a pointer(tbsResponseDataDER) to its undecoded data DER.
*/
ocspResponseData *
ocsp_GetResponseData(CERTOCSPResponse *response, SECItem **tbsResponseDataDER)
{
ocspBasicOCSPResponse *basic;
ocspResponseData *responseData;
PORT_Assert(response != NULL);
PORT_Assert(response->responseBytes != NULL);
PORT_Assert(response->responseBytes->responseTypeTag
== SEC_OID_PKIX_OCSP_BASIC_RESPONSE);
basic = response->responseBytes->decodedResponse.basic;
PORT_Assert(basic != NULL);
responseData = basic->tbsResponseData;
PORT_Assert(responseData != NULL);
if (tbsResponseDataDER) {
*tbsResponseDataDER = &basic->tbsResponseDataDER;
PORT_Assert((*tbsResponseDataDER)->data != NULL);
PORT_Assert((*tbsResponseDataDER)->len != 0);
}
return responseData;
}
/*
* Much like the routine above, except it returns the response signature.
* Again, no copy is done.
*/
ocspSignature *
ocsp_GetResponseSignature(CERTOCSPResponse *response)
{
ocspBasicOCSPResponse *basic;
PORT_Assert(response != NULL);
if (NULL == response->responseBytes) {
return NULL;
}
PORT_Assert(response->responseBytes != NULL);
PORT_Assert(response->responseBytes->responseTypeTag
== SEC_OID_PKIX_OCSP_BASIC_RESPONSE);
basic = response->responseBytes->decodedResponse.basic;
PORT_Assert(basic != NULL);
return &(basic->responseSignature);
}
/*
* FUNCTION: CERT_DestroyOCSPResponse
* Frees an OCSP Response structure.
* INPUTS:
* CERTOCSPResponse *request
* Pointer to CERTOCSPResponse to be freed.
* RETURN:
* No return value; no errors.
*/
void
CERT_DestroyOCSPResponse(CERTOCSPResponse *response)
{
if (response != NULL) {
ocspSignature *signature = ocsp_GetResponseSignature(response);
if (signature && signature->cert != NULL)
CERT_DestroyCertificate(signature->cert);
/*
* We should actually never have a response without an arena,
* but check just in case. (If there isn't one, there is not
* much we can do about it...)
*/
PORT_Assert(response->arena != NULL);
if (response->arena != NULL) {
PORT_FreeArena(response->arena, PR_FALSE);
}
}
}
/*
* OVERALL OCSP CLIENT SUPPORT (make and send a request, verify a response):
*/
/*
* Pick apart a URL, saving the important things in the passed-in pointers.
*
* We expect to find "http://<hostname>[:<port>]/[path]", though we will
* tolerate that final slash character missing, as well as beginning and
* trailing whitespace, and any-case-characters for "http". All of that
* tolerance is what complicates this routine. What we want is just to
* pick out the hostname, the port, and the path.
*
* On a successful return, the caller will need to free the output pieces
* of hostname and path, which are copies of the values found in the url.
*/
static SECStatus
ocsp_ParseURL(const char *url, char **pHostname, PRUint16 *pPort, char **pPath)
{
unsigned short port = 80; /* default, in case not in url */
char *hostname = NULL;
char *path = NULL;
const char *save;
char c;
int len;
if (url == NULL)
goto loser;
/*
* Skip beginning whitespace.
*/
c = *url;
while ((c == ' ' || c == '\t') && c != '\0') {
url++;
c = *url;
}
if (c == '\0')
goto loser;
/*
* Confirm, then skip, protocol. (Since we only know how to do http,
* that is all we will accept).
*/
if (PORT_Strncasecmp(url, "http://", 7) != 0)
goto loser;
url += 7;
/*
* Whatever comes next is the hostname (or host IP address). We just
* save it aside and then search for its end so we can determine its
* length and copy it.
*
* XXX Note that because we treat a ':' as a terminator character
* (and below, we expect that to mean there is a port specification
* immediately following), we will not handle IPv6 addresses. That is
* apparently an acceptable limitation, for the time being. Some day,
* when there is a clear way to specify a URL with an IPv6 address that
* can be parsed unambiguously, this code should be made to do that.
*/
save = url;
c = *url;
while (c != '/' && c != ':' && c != '\0' && c != ' ' && c != '\t') {
url++;
c = *url;
}
len = url - save;
hostname = PORT_Alloc(len + 1);
if (hostname == NULL)
goto loser;
PORT_Memcpy(hostname, save, len);
hostname[len] = '\0';
/*
* Now we figure out if there was a port specified or not.
* If so, we need to parse it (as a number) and skip it.
*/
if (c == ':') {
url++;
port = (unsigned short) PORT_Atoi(url);
c = *url;
while (c != '/' && c != '\0' && c != ' ' && c != '\t') {
if (c < '0' || c > '9')
goto loser;
url++;
c = *url;
}
}
/*
* Last thing to find is a path. There *should* be a slash,
* if nothing else -- but if there is not we provide one.
*/
if (c == '/') {
save = url;
while (c != '\0' && c != ' ' && c != '\t') {
url++;
c = *url;
}
len = url - save;
path = PORT_Alloc(len + 1);
if (path == NULL)
goto loser;
PORT_Memcpy(path, save, len);
path[len] = '\0';
} else {
path = PORT_Strdup("/");
if (path == NULL)
goto loser;
}
*pHostname = hostname;
*pPort = port;
*pPath = path;
return SECSuccess;
loser:
if (hostname != NULL)
PORT_Free(hostname);
PORT_SetError(SEC_ERROR_CERT_BAD_ACCESS_LOCATION);
return SECFailure;
}
/*
* Open a socket to the specified host on the specified port, and return it.
* The host is either a hostname or an IP address.
*/
static PRFileDesc *
ocsp_ConnectToHost(const char *host, PRUint16 port)
{
PRFileDesc *sock = NULL;
PRIntervalTime timeout;
PRNetAddr addr;
char *netdbbuf = NULL;
sock = PR_NewTCPSocket();
if (sock == NULL)
goto loser;
/* XXX Some day need a way to set (and get?) the following value */
timeout = PR_SecondsToInterval(30);
/*
* If the following converts an IP address string in "dot notation"
* into a PRNetAddr. If it fails, we assume that is because we do not
* have such an address, but instead a host *name*. In that case we
* then lookup the host by name. Using the NSPR function this way
* means we do not have to have our own logic for distinguishing a
* valid numerical IP address from a hostname.
*/
if (PR_StringToNetAddr(host, &addr) != PR_SUCCESS) {
PRIntn hostIndex;
PRHostEnt hostEntry;
netdbbuf = PORT_Alloc(PR_NETDB_BUF_SIZE);
if (netdbbuf == NULL)
goto loser;
if (PR_GetHostByName(host, netdbbuf, PR_NETDB_BUF_SIZE,
&hostEntry) != PR_SUCCESS)
goto loser;
hostIndex = 0;
do {
hostIndex = PR_EnumerateHostEnt(hostIndex, &hostEntry, port, &addr);
if (hostIndex <= 0)
goto loser;
} while (PR_Connect(sock, &addr, timeout) != PR_SUCCESS);
PORT_Free(netdbbuf);
} else {
/*
* First put the port into the address, then connect.
*/
if (PR_InitializeNetAddr(PR_IpAddrNull, port, &addr) != PR_SUCCESS)
goto loser;
if (PR_Connect(sock, &addr, timeout) != PR_SUCCESS)
goto loser;
}
return sock;
loser:
if (sock != NULL)
PR_Close(sock);
if (netdbbuf != NULL)
PORT_Free(netdbbuf);
return NULL;
}
/*
* Sends an encoded OCSP request to the server identified by "location",
* and returns the socket on which it was sent (so can listen for the reply).
* "location" is expected to be a valid URL -- an error parsing it produces
* SEC_ERROR_CERT_BAD_ACCESS_LOCATION. Other errors are likely problems
* connecting to it, or writing to it, or allocating memory, and the low-level
* errors appropriate to the problem will be set.
*/
static PRFileDesc *
ocsp_SendEncodedRequest(char *location, SECItem *encodedRequest)
{
char *hostname = NULL;
char *path = NULL;
PRUint16 port;
SECStatus rv;
PRFileDesc *sock = NULL;
PRFileDesc *returnSock = NULL;
char *header = NULL;
/*
* Take apart the location, getting the hostname, port, and path.
*/
rv = ocsp_ParseURL(location, &hostname, &port, &path);
if (rv != SECSuccess)
goto loser;
PORT_Assert(hostname != NULL);
PORT_Assert(path != NULL);
sock = ocsp_ConnectToHost(hostname, port);
if (sock == NULL)
goto loser;
header = PR_smprintf("POST %s HTTP/1.0\r\n"
"Host: %s:%d\r\n"
"Content-Type: application/ocsp-request\r\n"
"Content-Length: %u\r\n\r\n",
path, hostname, port, encodedRequest->len);
if (header == NULL)
goto loser;
/*
* The NSPR documentation promises that if it can, it will write the full
* amount; this will not return a partial value expecting us to loop.
*/
if (PR_Write(sock, header, (PRInt32) PORT_Strlen(header)) < 0)
goto loser;
if (PR_Write(sock, encodedRequest->data,
(PRInt32) encodedRequest->len) < 0)
goto loser;
returnSock = sock;
sock = NULL;
loser:
if (header != NULL)
PORT_Free(header);
if (sock != NULL)
PR_Close(sock);
if (path != NULL)
PORT_Free(path);
if (hostname != NULL)
PORT_Free(hostname);
return returnSock;
}
/*
* Read from "fd" into "buf" -- expect/attempt to read a given number of bytes
* Obviously, stop if hit end-of-stream. Timeout is passed in.
*/
static int
ocsp_read(PRFileDesc *fd, char *buf, int toread, PRIntervalTime timeout)
{
int total = 0;
while (total < toread)
{
PRInt32 got;
got = PR_Recv(fd, buf + total, (PRInt32) (toread - total), 0, timeout);
if (got < 0)
{
if (0 == total)
{
total = -1; /* report the error if we didn't read anything yet */
}
break;
}
else
if (got == 0)
{ /* EOS */
break;
}
total += got;
}
return total;
}
#define OCSP_BUFSIZE 1024
#define AbortHttpDecode(error) \
{ \
if (inBuffer) \
PORT_Free(inBuffer); \
PORT_SetError(error); \
return NULL; \
}
/*
* Reads on the given socket and returns an encoded response when received.
* Properly formatted HTTP/1.0 response headers are expected to be read
* from the socket, preceding a binary-encoded OCSP response. Problems
* with parsing cause the error SEC_ERROR_OCSP_BAD_HTTP_RESPONSE to be
* set; any other problems are likely low-level i/o or memory allocation
* errors.
*/
static SECItem *
ocsp_GetEncodedResponse(PRArenaPool *arena, PRFileDesc *sock)
{
/* first read HTTP status line and headers */
char* inBuffer = NULL;
PRInt32 offset = 0;
PRInt32 inBufsize = 0;
const PRInt32 bufSizeIncrement = OCSP_BUFSIZE; /* 1 KB at a time */
const PRInt32 maxBufSize = 8 * bufSizeIncrement ; /* 8 KB max */
const char* CRLF = "\r\n";
const PRInt32 CRLFlen = strlen(CRLF);
const char* headerEndMark = "\r\n\r\n";
const PRInt32 markLen = strlen(headerEndMark);
const PRIntervalTime ocsptimeout =
PR_SecondsToInterval(30); /* hardcoded to 30s for now */
char* headerEnd = NULL;
PRBool EOS = PR_FALSE;
const char* httpprotocol = "HTTP/";
const PRInt32 httplen = strlen(httpprotocol);
const char* httpcode = NULL;
const char* contenttype = NULL;
PRInt32 contentlength = 0;
PRInt32 bytesRead = 0;
char* statusLineEnd = NULL;
char* space = NULL;
char* nextHeader = NULL;
SECItem* result = NULL;
/* read up to at least the end of the HTTP headers */
do
{
inBufsize += bufSizeIncrement;
inBuffer = PORT_Realloc(inBuffer, inBufsize+1);
if (NULL == inBuffer)
{
AbortHttpDecode(SEC_ERROR_NO_MEMORY);
}
bytesRead = ocsp_read(sock, inBuffer + offset, bufSizeIncrement,
ocsptimeout);
if (bytesRead > 0)
{
PRInt32 searchOffset = (offset - markLen) >0 ? offset-markLen : 0;
offset += bytesRead;
*(inBuffer + offset) = '\0'; /* NULL termination */
headerEnd = strstr((const char*)inBuffer + searchOffset, headerEndMark);
if (bytesRead < bufSizeIncrement)
{
/* we read less data than requested, therefore we are at
EOS or there was a read error */
EOS = PR_TRUE;
}
}
else
{
/* recv error or EOS */
EOS = PR_TRUE;
}
} while ( (!headerEnd) && (PR_FALSE == EOS) &&
(inBufsize < maxBufSize) );
if (!headerEnd)
{
AbortHttpDecode(SEC_ERROR_OCSP_BAD_HTTP_RESPONSE);
}
/* parse the HTTP status line */
statusLineEnd = strstr((const char*)inBuffer, CRLF);
if (!statusLineEnd)
{
AbortHttpDecode(SEC_ERROR_OCSP_BAD_HTTP_RESPONSE);
}
*statusLineEnd = '\0';
/* check for HTTP/ response */
space = strchr((const char*)inBuffer, ' ');
if (!space || PORT_Strncasecmp((const char*)inBuffer, httpprotocol, httplen) != 0 )
{
AbortHttpDecode(SEC_ERROR_OCSP_BAD_HTTP_RESPONSE);
}
/* check the HTTP status code of 200 */
httpcode = space +1;
space = strchr(httpcode, ' ');
if (!space)
{
AbortHttpDecode(SEC_ERROR_OCSP_BAD_HTTP_RESPONSE);
}
*space = 0;
if (0 != strcmp(httpcode, "200"))
{
AbortHttpDecode(SEC_ERROR_OCSP_BAD_HTTP_RESPONSE);
}
/* parse the HTTP headers in the buffer . We only care about
content-type and content-length
*/
nextHeader = statusLineEnd + CRLFlen;
*headerEnd = '\0'; /* terminate */
do
{
char* thisHeaderEnd = NULL;
char* value = NULL;
char* colon = strchr(nextHeader, ':');
if (!colon)
{
AbortHttpDecode(SEC_ERROR_OCSP_BAD_HTTP_RESPONSE);
}
*colon = '\0';
value = colon + 1;
/* jpierre - note : the following code will only handle the basic form
of HTTP/1.0 response headers, of the form "name: value" . Headers
split among multiple lines are not supported. This is not common
and should not be an issue, but it could become one in the
future */
if (*value != ' ')
{
AbortHttpDecode(SEC_ERROR_OCSP_BAD_HTTP_RESPONSE);
}
value++;
thisHeaderEnd = strstr(value, CRLF);
if (thisHeaderEnd )
{
*thisHeaderEnd = '\0';
}
if (0 == PORT_Strcasecmp(nextHeader, "content-type"))
{
contenttype = value;
}
else
if (0 == PORT_Strcasecmp(nextHeader, "content-length"))
{
contentlength = atoi(value);
}
if (thisHeaderEnd )
{
nextHeader = thisHeaderEnd + CRLFlen;
}
else
{
nextHeader = NULL;
}
} while (nextHeader && (nextHeader < (headerEnd + CRLFlen) ) );
/* check content-type */
if (!contenttype ||
(0 != PORT_Strcasecmp(contenttype, "application/ocsp-response")) )
{
AbortHttpDecode(SEC_ERROR_OCSP_BAD_HTTP_RESPONSE);
}
/* read the body of the OCSP response */
offset = offset - (PRInt32) (headerEnd - (const char*)inBuffer) - markLen;
if (offset)
{
/* move all data to the beginning of the buffer */
PORT_Memmove(inBuffer, headerEnd + markLen, offset);
}
/* resize buffer to only what's needed to hold the current response */
inBufsize = (1 + (offset-1) / bufSizeIncrement ) * bufSizeIncrement ;
while ( (PR_FALSE == EOS) &&
( (contentlength == 0) || (offset < contentlength) ) &&
(inBufsize < maxBufSize)
)
{
/* we still need to receive more body data */
inBufsize += bufSizeIncrement;
inBuffer = PORT_Realloc(inBuffer, inBufsize+1);
if (NULL == inBuffer)
{
AbortHttpDecode(SEC_ERROR_NO_MEMORY);
}
bytesRead = ocsp_read(sock, inBuffer + offset, bufSizeIncrement,
ocsptimeout);
if (bytesRead > 0)
{
offset += bytesRead;
if (bytesRead < bufSizeIncrement)
{
/* we read less data than requested, therefore we are at
EOS or there was a read error */
EOS = PR_TRUE;
}
}
else
{
/* recv error or EOS */
EOS = PR_TRUE;
}
}
if (0 == offset)
{
AbortHttpDecode(SEC_ERROR_OCSP_BAD_HTTP_RESPONSE);
}
/*
* Now allocate the item to hold the data.
*/
result = SECITEM_AllocItem(arena, NULL, offset);
if (NULL == result)
{
AbortHttpDecode(SEC_ERROR_NO_MEMORY);
}
/*
* And copy the data left in the buffer.
*/
PORT_Memcpy(result->data, inBuffer, offset);
/* and free the temporary buffer */
PORT_Free(inBuffer);
return result;
}
SECStatus
CERT_ParseURL(const char *url, char **pHostname, PRUint16 *pPort, char **pPath)
{
return ocsp_ParseURL(url, pHostname, pPort, pPath);
}
/*
* Limit the size of http responses we are willing to accept.
*/
#define MAX_WANTED_OCSP_RESPONSE_LEN 64*1024
static SECItem *
fetchOcspHttpClientV1(PRArenaPool *arena,
const SEC_HttpClientFcnV1 *hcv1,
char *location,
SECItem *encodedRequest)
{
char *hostname = NULL;
char *path = NULL;
PRUint16 port;
SECItem *encodedResponse = NULL;
SEC_HTTP_SERVER_SESSION pServerSession = NULL;
SEC_HTTP_REQUEST_SESSION pRequestSession = NULL;
PRUint16 myHttpResponseCode;
const char *myHttpResponseData;
PRUint32 myHttpResponseDataLen;
if (ocsp_ParseURL(location, &hostname, &port, &path) == SECFailure) {
PORT_SetError(SEC_ERROR_OCSP_MALFORMED_REQUEST);
goto loser;
}
PORT_Assert(hostname != NULL);
PORT_Assert(path != NULL);
if ((*hcv1->createSessionFcn)(
hostname,
port,
&pServerSession) != SECSuccess) {
PORT_SetError(SEC_ERROR_OCSP_SERVER_ERROR);
goto loser;
}
/* We use a non-zero timeout, which means:
- the client will use blocking I/O
- TryFcn will not return WOULD_BLOCK nor a poll descriptor
- it's sufficient to call TryFcn once
No lock for accessing OCSP_Global.timeoutSeconds, bug 406120
*/
if ((*hcv1->createFcn)(
pServerSession,
"http",
path,
"POST",
PR_TicksPerSecond() * OCSP_Global.timeoutSeconds,
&pRequestSession) != SECSuccess) {
PORT_SetError(SEC_ERROR_OCSP_SERVER_ERROR);
goto loser;
}
if ((*hcv1->setPostDataFcn)(
pRequestSession,
(char*)encodedRequest->data,
encodedRequest->len,
"application/ocsp-request") != SECSuccess) {
PORT_SetError(SEC_ERROR_OCSP_SERVER_ERROR);
goto loser;
}
/* we don't want result objects larger than this: */
myHttpResponseDataLen = MAX_WANTED_OCSP_RESPONSE_LEN;
OCSP_TRACE(("OCSP trySendAndReceive %s\n", location));
if ((*hcv1->trySendAndReceiveFcn)(
pRequestSession,
NULL,
&myHttpResponseCode,
NULL,
NULL,
&myHttpResponseData,
&myHttpResponseDataLen) != SECSuccess) {
PORT_SetError(SEC_ERROR_OCSP_SERVER_ERROR);
goto loser;
}
OCSP_TRACE(("OCSP trySendAndReceive result http %d\n", myHttpResponseCode));
if (myHttpResponseCode != 200) {
PORT_SetError(SEC_ERROR_OCSP_BAD_HTTP_RESPONSE);
goto loser;
}
encodedResponse = SECITEM_AllocItem(arena, NULL, myHttpResponseDataLen);
if (!encodedResponse) {
PORT_SetError(SEC_ERROR_NO_MEMORY);
goto loser;
}
PORT_Memcpy(encodedResponse->data, myHttpResponseData, myHttpResponseDataLen);
loser:
if (pRequestSession != NULL)
(*hcv1->freeFcn)(pRequestSession);
if (pServerSession != NULL)
(*hcv1->freeSessionFcn)(pServerSession);
if (path != NULL)
PORT_Free(path);
if (hostname != NULL)
PORT_Free(hostname);
return encodedResponse;
}
/*
* FUNCTION: CERT_GetEncodedOCSPResponse
* Creates and sends a request to an OCSP responder, then reads and
* returns the (encoded) response.
* INPUTS:
* PRArenaPool *arena
* Pointer to arena from which return value will be allocated.
* If NULL, result will be allocated from the heap (and thus should
* be freed via SECITEM_FreeItem).
* CERTCertList *certList
* A list of certs for which status will be requested.
* Note that all of these certificates should have the same issuer,
* or it's expected the response will be signed by a trusted responder.
* If the certs need to be broken up into multiple requests, that
* must be handled by the caller (and thus by having multiple calls
* to this routine), who knows about where the request(s) are being
* sent and whether there are any trusted responders in place.
* char *location
* The location of the OCSP responder (a URL).
* int64 time
* Indicates the time for which the certificate status is to be
* determined -- this may be used in the search for the cert's issuer
* but has no other bearing on the operation.
* PRBool addServiceLocator
* If true, the Service Locator extension should be added to the
* single request(s) for each cert.
* CERTCertificate *signerCert
* If non-NULL, means sign the request using this cert. Otherwise,
* do not sign.
* void *pwArg
* Pointer to argument for password prompting, if needed. (Definitely
* not needed if not signing.)
* OUTPUTS:
* CERTOCSPRequest **pRequest
* Pointer in which to store the OCSP request created for the given
* list of certificates. It is only filled in if the entire operation
* is successful and the pointer is not null -- and in that case the
* caller is then reponsible for destroying it.
* RETURN:
* Returns a pointer to the SECItem holding the response.
* On error, returns null with error set describing the reason:
* SEC_ERROR_UNKNOWN_ISSUER
* SEC_ERROR_CERT_BAD_ACCESS_LOCATION
* SEC_ERROR_OCSP_BAD_HTTP_RESPONSE
* Other errors are low-level problems (no memory, bad database, etc.).
*/
SECItem *
CERT_GetEncodedOCSPResponse(PRArenaPool *arena, CERTCertList *certList,
char *location, int64 time,
PRBool addServiceLocator,
CERTCertificate *signerCert, void *pwArg,
CERTOCSPRequest **pRequest)
{
CERTOCSPRequest *request;
request = CERT_CreateOCSPRequest(certList, time, addServiceLocator,
signerCert);
if (!request)
return NULL;
return ocsp_GetEncodedOCSPResponseFromRequest(arena, request, location,
time, addServiceLocator,
pwArg, pRequest);
}
static SECItem *
ocsp_GetEncodedOCSPResponseFromRequest(PRArenaPool *arena,
CERTOCSPRequest *request,
char *location, int64 time,
PRBool addServiceLocator,
void *pwArg,
CERTOCSPRequest **pRequest)
{
SECItem *encodedRequest = NULL;
SECItem *encodedResponse = NULL;
PRFileDesc *sock = NULL;
SECStatus rv;
const SEC_HttpClientFcn *registeredHttpClient = NULL;
rv = CERT_AddOCSPAcceptableResponses(request,
SEC_OID_PKIX_OCSP_BASIC_RESPONSE);
if (rv != SECSuccess)
goto loser;
encodedRequest = CERT_EncodeOCSPRequest(NULL, request, pwArg);
if (encodedRequest == NULL)
goto loser;
registeredHttpClient = SEC_GetRegisteredHttpClient();
if (registeredHttpClient
&&
registeredHttpClient->version == 1) {
encodedResponse = fetchOcspHttpClientV1(
arena,
&registeredHttpClient->fcnTable.ftable1,
location,
encodedRequest);
}
else {
/* use internal http client */
sock = ocsp_SendEncodedRequest(location, encodedRequest);
if (sock == NULL)
goto loser;
encodedResponse = ocsp_GetEncodedResponse(arena, sock);
}
if (encodedResponse != NULL && pRequest != NULL) {
*pRequest = request;
request = NULL; /* avoid destroying below */
}
loser:
if (request != NULL)
CERT_DestroyOCSPRequest(request);
if (encodedRequest != NULL)
SECITEM_FreeItem(encodedRequest, PR_TRUE);
if (sock != NULL)
PR_Close(sock);
return encodedResponse;
}
static SECItem *
ocsp_GetEncodedOCSPResponseForSingleCert(PRArenaPool *arena,
CERTOCSPCertID *certID,
CERTCertificate *singleCert,
char *location, int64 time,
PRBool addServiceLocator,
void *pwArg,
CERTOCSPRequest **pRequest)
{
CERTOCSPRequest *request;
request = cert_CreateSingleCertOCSPRequest(certID, singleCert, time,
addServiceLocator, NULL);
if (!request)
return NULL;
return ocsp_GetEncodedOCSPResponseFromRequest(arena, request, location,
time, addServiceLocator,
pwArg, pRequest);
}
/* Checks a certificate for the key usage extension of OCSP signer. */
static PRBool
ocsp_CertIsOCSPDesignatedResponder(CERTCertificate *cert)
{
SECStatus rv;
SECItem extItem;
SECItem **oids;
SECItem *oid;
SECOidTag oidTag;
PRBool retval;
CERTOidSequence *oidSeq = NULL;
extItem.data = NULL;
rv = CERT_FindCertExtension(cert, SEC_OID_X509_EXT_KEY_USAGE, &extItem);
if ( rv != SECSuccess ) {
goto loser;
}
oidSeq = CERT_DecodeOidSequence(&extItem);
if ( oidSeq == NULL ) {
goto loser;
}
oids = oidSeq->oids;
while ( *oids != NULL ) {
oid = *oids;
oidTag = SECOID_FindOIDTag(oid);
if ( oidTag == SEC_OID_OCSP_RESPONDER ) {
goto success;
}
oids++;
}
loser:
retval = PR_FALSE;
PORT_SetError(SEC_ERROR_OCSP_INVALID_SIGNING_CERT);
goto done;
success:
retval = PR_TRUE;
done:
if ( extItem.data != NULL ) {
PORT_Free(extItem.data);
}
if ( oidSeq != NULL ) {
CERT_DestroyOidSequence(oidSeq);
}
return(retval);
}
#ifdef LATER /*
* XXX This function is not currently used, but will
* be needed later when we do revocation checking of
* the responder certificate. Of course, it may need
* revising then, if the cert extension interface has
* changed. (Hopefully it will!)
*/
/* Checks a certificate to see if it has the OCSP no check extension. */
static PRBool
ocsp_CertHasNoCheckExtension(CERTCertificate *cert)
{
SECStatus rv;
rv = CERT_FindCertExtension(cert, SEC_OID_PKIX_OCSP_NO_CHECK,
NULL);
if (rv == SECSuccess) {
return PR_TRUE;
}
return PR_FALSE;
}
#endif /* LATER */
static PRBool
ocsp_matchcert(SECItem *certIndex,CERTCertificate *testCert)
{
SECItem item;
unsigned char buf[HASH_LENGTH_MAX];
item.data = buf;
item.len = SHA1_LENGTH;
if (CERT_GetSPKIDigest(NULL,testCert,SEC_OID_SHA1, &item) == NULL) {
return PR_FALSE;
}
if (SECITEM_ItemsAreEqual(certIndex,&item)) {
return PR_TRUE;
}
if (CERT_GetSPKIDigest(NULL,testCert,SEC_OID_MD5, &item) == NULL) {
return PR_FALSE;
}
if (SECITEM_ItemsAreEqual(certIndex,&item)) {
return PR_TRUE;
}
if (CERT_GetSPKIDigest(NULL,testCert,SEC_OID_MD2, &item) == NULL) {
return PR_FALSE;
}
if (SECITEM_ItemsAreEqual(certIndex,&item)) {
return PR_TRUE;
}
return PR_FALSE;
}
static CERTCertificate *
ocsp_CertGetDefaultResponder(CERTCertDBHandle *handle,CERTOCSPCertID *certID);
CERTCertificate *
ocsp_GetSignerCertificate(CERTCertDBHandle *handle, ocspResponseData *tbsData,
ocspSignature *signature, CERTCertificate *issuer)
{
CERTCertificate **certs = NULL;
CERTCertificate *signerCert = NULL;
SECStatus rv = SECFailure;
PRBool lookupByName = PR_TRUE;
void *certIndex = NULL;
int certCount = 0;
PORT_Assert(tbsData->responderID != NULL);
switch (tbsData->responderID->responderIDType) {
case ocspResponderID_byName:
lookupByName = PR_TRUE;
certIndex = &tbsData->derResponderID;
break;
case ocspResponderID_byKey:
lookupByName = PR_FALSE;
certIndex = &tbsData->responderID->responderIDValue.keyHash;
break;
case ocspResponderID_other:
default:
PORT_Assert(0);
PORT_SetError(SEC_ERROR_OCSP_MALFORMED_RESPONSE);
return NULL;
}
/*
* If the signature contains some certificates as well, temporarily
* import them in case they are needed for verification.
*
* Note that the result of this is that each cert in "certs" needs
* to be destroyed.
*/
if (signature->derCerts != NULL) {
for (; signature->derCerts[certCount] != NULL; certCount++) {
/* just counting */
}
rv = CERT_ImportCerts(handle, certUsageStatusResponder, certCount,
signature->derCerts, &certs,
PR_FALSE, PR_FALSE, NULL);
if (rv != SECSuccess)
goto finish;
}
/*
* Now look up the certificate that did the signing.
* The signer can be specified either by name or by key hash.
*/
if (lookupByName) {
SECItem *crIndex = (SECItem*)certIndex;
SECItem encodedName;
PLArenaPool *arena;
arena = PORT_NewArena(DER_DEFAULT_CHUNKSIZE);
if (arena != NULL) {
rv = SEC_QuickDERDecodeItem(arena, &encodedName,
ocsp_ResponderIDDerNameTemplate,
crIndex);
if (rv != SECSuccess) {
if (PORT_GetError() == SEC_ERROR_BAD_DER)
PORT_SetError(SEC_ERROR_OCSP_MALFORMED_RESPONSE);
} else {
signerCert = CERT_FindCertByName(handle, &encodedName);
}
PORT_FreeArena(arena, PR_FALSE);
}
} else {
/*
* The signer is either 1) a known issuer CA we passed in,
* 2) the default OCSP responder, or 3) an intermediate CA
* passed in the cert list to use. Figure out which it is.
*/
int i;
CERTCertificate *responder =
ocsp_CertGetDefaultResponder(handle, NULL);
if (responder && ocsp_matchcert(certIndex,responder)) {
signerCert = CERT_DupCertificate(responder);
} else if (issuer && ocsp_matchcert(certIndex,issuer)) {
signerCert = CERT_DupCertificate(issuer);
}
for (i=0; (signerCert == NULL) && (i < certCount); i++) {
if (ocsp_matchcert(certIndex,certs[i])) {
signerCert = CERT_DupCertificate(certs[i]);
}
}
}
finish:
if (certs != NULL) {
CERT_DestroyCertArray(certs, certCount);
}
return signerCert;
}
SECStatus
ocsp_VerifyResponseSignature(CERTCertificate *signerCert,
ocspSignature *signature,
SECItem *tbsResponseDataDER,
void *pwArg)
{
SECItem rawSignature;
SECKEYPublicKey *signerKey = NULL;
SECStatus rv = SECFailure;
/*
* Now get the public key from the signer's certificate; we need
* it to perform the verification.
*/
signerKey = CERT_ExtractPublicKey(signerCert);
if (signerKey == NULL)
return SECFailure;
/*
* We copy the signature data *pointer* and length, so that we can
* modify the length without damaging the original copy. This is a
* simple copy, not a dup, so no destroy/free is necessary.
*/
rawSignature = signature->signature;
/*
* The raw signature is a bit string, but we need to represent its
* length in bytes, because that is what the verify function expects.
*/
DER_ConvertBitString(&rawSignature);
rv = VFY_VerifyDataWithAlgorithmID(tbsResponseDataDER->data,
tbsResponseDataDER->len,
signerKey, &rawSignature,
&signature->signatureAlgorithm,
NULL, pwArg);
if (rv != SECSuccess && PORT_GetError() == SEC_ERROR_BAD_SIGNATURE) {
PORT_SetError(SEC_ERROR_OCSP_BAD_SIGNATURE);
}
if (signerKey != NULL) {
SECKEY_DestroyPublicKey(signerKey);
}
return rv;
}
/*
* FUNCTION: CERT_VerifyOCSPResponseSignature
* Check the signature on an OCSP Response. Will also perform a
* verification of the signer's certificate. Note, however, that a
* successful verification does not make any statement about the
* signer's *authority* to provide status for the certificate(s),
* that must be checked individually for each certificate.
* INPUTS:
* CERTOCSPResponse *response
* Pointer to response structure with signature to be checked.
* CERTCertDBHandle *handle
* Pointer to CERTCertDBHandle for certificate DB to use for verification.
* void *pwArg
* Pointer to argument for password prompting, if needed.
* OUTPUTS:
* CERTCertificate **pSignerCert
* Pointer in which to store signer's certificate; only filled-in if
* non-null.
* RETURN:
* Returns SECSuccess when signature is valid, anything else means invalid.
* Possible errors set:
* SEC_ERROR_OCSP_MALFORMED_RESPONSE - unknown type of ResponderID
* SEC_ERROR_INVALID_TIME - bad format of "ProducedAt" time
* SEC_ERROR_UNKNOWN_SIGNER - signer's cert could not be found
* SEC_ERROR_BAD_SIGNATURE - the signature did not verify
* Other errors are any of the many possible failures in cert verification
* (e.g. SEC_ERROR_REVOKED_CERTIFICATE, SEC_ERROR_UNTRUSTED_ISSUER) when
* verifying the signer's cert, or low-level problems (no memory, etc.)
*/
SECStatus
CERT_VerifyOCSPResponseSignature(CERTOCSPResponse *response,
CERTCertDBHandle *handle, void *pwArg,
CERTCertificate **pSignerCert,
CERTCertificate *issuer)
{
SECItem *tbsResponseDataDER;
CERTCertificate *signerCert = NULL;
SECStatus rv = SECFailure;
int64 producedAt;
/* ocsp_DecodeBasicOCSPResponse will fail if asn1 decoder is unable
* to properly decode tbsData (see the function and
* ocsp_BasicOCSPResponseTemplate). Thus, tbsData can not be
* equal to null */
ocspResponseData *tbsData = ocsp_GetResponseData(response,
&tbsResponseDataDER);
ocspSignature *signature = ocsp_GetResponseSignature(response);
if (!signature) {
PORT_SetError(SEC_ERROR_OCSP_BAD_SIGNATURE);
return SECFailure;
}
/*
* If this signature has already gone through verification, just
* return the cached result.
*/
if (signature->wasChecked) {
if (signature->status == SECSuccess) {
if (pSignerCert != NULL)
*pSignerCert = CERT_DupCertificate(signature->cert);
} else {
PORT_SetError(signature->failureReason);
}
return signature->status;
}
signerCert = ocsp_GetSignerCertificate(handle, tbsData,
signature, issuer);
if (signerCert == NULL) {
rv = SECFailure;
if (PORT_GetError() == SEC_ERROR_UNKNOWN_CERT) {
/* Make the error a little more specific. */
PORT_SetError(SEC_ERROR_OCSP_INVALID_SIGNING_CERT);
}
goto finish;
}
/*
* We could mark this true at the top of this function, or always
* below at "finish", but if the problem was just that we could not
* find the signer's cert, leave that as if the signature hasn't
* been checked in case a subsequent call might have better luck.
*/
signature->wasChecked = PR_TRUE;
/*
* The function will also verify the signer certificate; we
* need to tell it *when* that certificate must be valid -- for our
* purposes we expect it to be valid when the response was signed.
* The value of "producedAt" is the signing time.
*/
rv = DER_GeneralizedTimeToTime(&producedAt, &tbsData->producedAt);
if (rv != SECSuccess)
goto finish;
/*
* Just because we have a cert does not mean it is any good; check
* it for validity, trust and usage.
*/
if (ocsp_CertIsOCSPDefaultResponder(handle, signerCert)) {
rv = SECSuccess;
} else {
SECCertUsage certUsage;
if (CERT_IsCACert(signerCert, NULL)) {
certUsage = certUsageAnyCA;
} else {
certUsage = certUsageStatusResponder;
}
rv = CERT_VerifyCert(handle, signerCert, PR_TRUE,
certUsage, producedAt, pwArg, NULL);
if (rv != SECSuccess) {
PORT_SetError(SEC_ERROR_OCSP_INVALID_SIGNING_CERT);
goto finish;
}
}
rv = ocsp_VerifyResponseSignature(signerCert, signature,
tbsResponseDataDER,
pwArg);
finish:
if (signature->wasChecked)
signature->status = rv;
if (rv != SECSuccess) {
signature->failureReason = PORT_GetError();
if (signerCert != NULL)
CERT_DestroyCertificate(signerCert);
} else {
/*
* Save signer's certificate in signature.
*/
signature->cert = signerCert;
if (pSignerCert != NULL) {
/*
* Pass pointer to signer's certificate back to our caller,
* who is also now responsible for destroying it.
*/
*pSignerCert = CERT_DupCertificate(signerCert);
}
}
return rv;
}
/*
* See if the request's certID and the single response's certID match.
* This can be easy or difficult, depending on whether the same hash
* algorithm was used.
*/
static PRBool
ocsp_CertIDsMatch(CERTCertDBHandle *handle,
CERTOCSPCertID *requestCertID,
CERTOCSPCertID *responseCertID)
{
PRBool match = PR_FALSE;
SECOidTag hashAlg;
SECItem *keyHash = NULL;
SECItem *nameHash = NULL;
/*
* In order to match, they must have the same issuer and the same
* serial number.
*
* We just compare the easier things first.
*/
if (SECITEM_CompareItem(&requestCertID->serialNumber,
&responseCertID->serialNumber) != SECEqual) {
goto done;
}
/*
* Make sure the "parameters" are not too bogus. Since we encoded
* requestCertID->hashAlgorithm, we don't need to check it.
*/
if (responseCertID->hashAlgorithm.parameters.len > 2) {
goto done;
}
if (SECITEM_CompareItem(&requestCertID->hashAlgorithm.algorithm,
&responseCertID->hashAlgorithm.algorithm) == SECEqual) {
/*
* If the hash algorithms match then we can do a simple compare
* of the hash values themselves.
*/
if ((SECITEM_CompareItem(&requestCertID->issuerNameHash,
&responseCertID->issuerNameHash) == SECEqual)
&& (SECITEM_CompareItem(&requestCertID->issuerKeyHash,
&responseCertID->issuerKeyHash) == SECEqual)) {
match = PR_TRUE;
}
goto done;
}
hashAlg = SECOID_FindOIDTag(&responseCertID->hashAlgorithm.algorithm);
switch (hashAlg) {
case SEC_OID_SHA1:
keyHash = &requestCertID->issuerSHA1KeyHash;
nameHash = &requestCertID->issuerSHA1NameHash;
break;
case SEC_OID_MD5:
keyHash = &requestCertID->issuerMD5KeyHash;
nameHash = &requestCertID->issuerMD5NameHash;
break;
case SEC_OID_MD2:
keyHash = &requestCertID->issuerMD2KeyHash;
nameHash = &requestCertID->issuerMD2NameHash;
break;
default:
PORT_SetError(SEC_ERROR_INVALID_ALGORITHM);
return SECFailure;
}
if ((keyHash != NULL)
&& (SECITEM_CompareItem(nameHash,
&responseCertID->issuerNameHash) == SECEqual)
&& (SECITEM_CompareItem(keyHash,
&responseCertID->issuerKeyHash) == SECEqual)) {
match = PR_TRUE;
}
done:
return match;
}
/*
* Find the single response for the cert specified by certID.
* No copying is done; this just returns a pointer to the appropriate
* response within responses, if it is found (and null otherwise).
* This is fine, of course, since this function is internal-use only.
*/
static CERTOCSPSingleResponse *
ocsp_GetSingleResponseForCertID(CERTOCSPSingleResponse **responses,
CERTCertDBHandle *handle,
CERTOCSPCertID *certID)
{
CERTOCSPSingleResponse *single;
int i;
if (responses == NULL)
return NULL;
for (i = 0; responses[i] != NULL; i++) {
single = responses[i];
if (ocsp_CertIDsMatch(handle, certID, single->certID)) {
return single;
}
}
/*
* The OCSP server should have included a response even if it knew
* nothing about the certificate in question. Since it did not,
* this will make it look as if it had.
*
* XXX Should we make this a separate error to notice the server's
* bad behavior?
*/
PORT_SetError(SEC_ERROR_OCSP_UNKNOWN_CERT);
return NULL;
}
static ocspCheckingContext *
ocsp_GetCheckingContext(CERTCertDBHandle *handle)
{
CERTStatusConfig *statusConfig;
ocspCheckingContext *ocspcx = NULL;
statusConfig = CERT_GetStatusConfig(handle);
if (statusConfig != NULL) {
ocspcx = statusConfig->statusContext;
/*
* This is actually an internal error, because we should never
* have a good statusConfig without a good statusContext, too.
* For lack of anything better, though, we just assert and use
* the same error as if there were no statusConfig (set below).
*/
PORT_Assert(ocspcx != NULL);
}
if (ocspcx == NULL)
PORT_SetError(SEC_ERROR_OCSP_NOT_ENABLED);
return ocspcx;
}
/*
* Return cert reference if the given signerCert is the default responder for
* the given certID. If not, or if any error, return NULL.
*/
static CERTCertificate *
ocsp_CertGetDefaultResponder(CERTCertDBHandle *handle, CERTOCSPCertID *certID)
{
ocspCheckingContext *ocspcx;
ocspcx = ocsp_GetCheckingContext(handle);
if (ocspcx == NULL)
goto loser;
/*
* Right now we have only one default responder. It applies to
* all certs when it is used, so the check is simple and certID
* has no bearing on the answer. Someday in the future we may
* allow configuration of different responders for different
* issuers, and then we would have to use the issuer specified
* in certID to determine if signerCert is the right one.
*/
if (ocspcx->useDefaultResponder) {
PORT_Assert(ocspcx->defaultResponderCert != NULL);
return ocspcx->defaultResponderCert;
}
loser:
return NULL;
}
/*
* Return true if the cert is one of the default responders configured for
* ocsp context. If not, or if any error, return false.
*/
PRBool
ocsp_CertIsOCSPDefaultResponder(CERTCertDBHandle *handle, CERTCertificate *cert)
{
ocspCheckingContext *ocspcx;
ocspcx = ocsp_GetCheckingContext(handle);
if (ocspcx == NULL)
return PR_FALSE;
/*
* Right now we have only one default responder. It applies to
* all certs when it is used, so the check is simple and certID
* has no bearing on the answer. Someday in the future we may
* allow configuration of different responders for different
* issuers, and then we would have to use the issuer specified
* in certID to determine if signerCert is the right one.
*/
if (ocspcx->useDefaultResponder &&
CERT_CompareCerts(ocspcx->defaultResponderCert, cert)) {
return PR_TRUE;
}
return PR_FALSE;
}
/*
* Check that the given signer certificate is authorized to sign status
* information for the given certID. Return true if it is, false if not
* (or if there is any error along the way). If false is returned because
* the signer is not authorized, the following error will be set:
* SEC_ERROR_OCSP_UNAUTHORIZED_RESPONSE
* Other errors are low-level problems (no memory, bad database, etc.).
*
* There are three ways to be authorized. In the order in which we check,
* using the terms used in the OCSP spec, the signer must be one of:
* 1. A "trusted responder" -- it matches a local configuration
* of OCSP signing authority for the certificate in question.
* 2. The CA who issued the certificate in question.
* 3. A "CA designated responder", aka an "authorized responder" -- it
* must be represented by a special cert issued by the CA who issued
* the certificate in question.
*/
static PRBool
ocsp_AuthorizedResponderForCertID(CERTCertDBHandle *handle,
CERTCertificate *signerCert,
CERTOCSPCertID *certID,
int64 thisUpdate)
{
CERTCertificate *issuerCert = NULL, *defRespCert;
SECItem *keyHash = NULL;
SECItem *nameHash = NULL;
SECOidTag hashAlg;
PRBool keyHashEQ = PR_FALSE, nameHashEQ = PR_FALSE;
/*
* Check first for a trusted responder, which overrides everything else.
*/
if ((defRespCert = ocsp_CertGetDefaultResponder(handle, certID)) &&
CERT_CompareCerts(defRespCert, signerCert)) {
return PR_TRUE;
}
/*
* In the other two cases, we need to do an issuer comparison.
* How we do it depends on whether the signer certificate has the
* special extension (for a designated responder) or not.
*
* First, lets check if signer of the response is the actual issuer
* of the cert. For that we will use signer cert key hash and cert subj
* name hash and will compare them with already calculated issuer key
* hash and issuer name hash. The hash algorithm is picked from response
* certID hash to avoid second hash calculation.
*/
hashAlg = SECOID_FindOIDTag(&certID->hashAlgorithm.algorithm);
keyHash = CERT_GetSPKIDigest(NULL, signerCert, hashAlg, NULL);
if (keyHash != NULL) {
keyHashEQ =
(SECITEM_CompareItem(keyHash,
&certID->issuerKeyHash) == SECEqual);
SECITEM_FreeItem(keyHash, PR_TRUE);
}
if (keyHashEQ &&
(nameHash = cert_GetSubjectNameDigest(NULL, signerCert,
hashAlg, NULL))) {
nameHashEQ =
(SECITEM_CompareItem(nameHash,
&certID->issuerNameHash) == SECEqual);
SECITEM_FreeItem(nameHash, PR_TRUE);
if (nameHashEQ) {
/* The issuer of the cert is the the signer of the response */
return PR_TRUE;
}
}
keyHashEQ = PR_FALSE;
nameHashEQ = PR_FALSE;
if (!ocsp_CertIsOCSPDesignatedResponder(signerCert)) {
PORT_SetError(SEC_ERROR_OCSP_UNAUTHORIZED_RESPONSE);
return PR_FALSE;
}
/*
* The signer is a designated responder. Its issuer must match
* the issuer of the cert being checked.
*/
issuerCert = CERT_FindCertIssuer(signerCert, thisUpdate,
certUsageAnyCA);
if (issuerCert == NULL) {
/*
* We could leave the SEC_ERROR_UNKNOWN_ISSUER error alone,
* but the following will give slightly more information.
* Once we have an error stack, things will be much better.
*/
PORT_SetError(SEC_ERROR_OCSP_UNAUTHORIZED_RESPONSE);
return PR_FALSE;
}
keyHash = CERT_GetSPKIDigest(NULL, issuerCert, hashAlg, NULL);
nameHash = cert_GetSubjectNameDigest(NULL, issuerCert, hashAlg, NULL);
CERT_DestroyCertificate(issuerCert);
if (keyHash != NULL && nameHash != NULL) {
keyHashEQ =
(SECITEM_CompareItem(keyHash,
&certID->issuerKeyHash) == SECEqual);
nameHashEQ =
(SECITEM_CompareItem(nameHash,
&certID->issuerNameHash) == SECEqual);
}
if (keyHash) {
SECITEM_FreeItem(keyHash, PR_TRUE);
}
if (nameHash) {
SECITEM_FreeItem(nameHash, PR_TRUE);
}
if (keyHashEQ && nameHashEQ) {
return PR_TRUE;
}
PORT_SetError(SEC_ERROR_OCSP_UNAUTHORIZED_RESPONSE);
return PR_FALSE;
}
/*
* We need to check that a responder gives us "recent" information.
* Since a responder can pre-package responses, we need to pick an amount
* of time that is acceptable to us, and reject any response that is
* older than that.
*
* XXX This *should* be based on some configuration parameter, so that
* different usages could specify exactly what constitutes "sufficiently
* recent". But that is not going to happen right away. For now, we
* want something from within the last 24 hours. This macro defines that
* number in seconds.
*/
#define OCSP_ALLOWABLE_LAPSE_SECONDS (24L * 60L * 60L)
static PRBool
ocsp_TimeIsRecent(int64 checkTime)
{
int64 now = PR_Now();
int64 lapse, tmp;
LL_I2L(lapse, OCSP_ALLOWABLE_LAPSE_SECONDS);
LL_I2L(tmp, PR_USEC_PER_SEC);
LL_MUL(lapse, lapse, tmp); /* allowable lapse in microseconds */
LL_ADD(checkTime, checkTime, lapse);
if (LL_CMP(now, >, checkTime))
return PR_FALSE;
return PR_TRUE;
}
#define OCSP_SLOP (5L*60L) /* OCSP responses are allowed to be 5 minutes
in the future by default */
static PRUint32 ocspsloptime = OCSP_SLOP; /* seconds */
/*
* Check that this single response is okay. A return of SECSuccess means:
* 1. The signer (represented by "signerCert") is authorized to give status
* for the cert represented by the individual response in "single".
* 2. The value of thisUpdate is earlier than now.
* 3. The value of producedAt is later than or the same as thisUpdate.
* 4. If nextUpdate is given:
* - The value of nextUpdate is later than now.
* - The value of producedAt is earlier than nextUpdate.
* Else if no nextUpdate:
* - The value of thisUpdate is fairly recent.
* - The value of producedAt is fairly recent.
* However we do not need to perform an explicit check for this last
* constraint because it is already guaranteed by checking that
* producedAt is later than thisUpdate and thisUpdate is recent.
* Oh, and any responder is "authorized" to say that a cert is unknown to it.
*
* If any of those checks fail, SECFailure is returned and an error is set:
* SEC_ERROR_OCSP_FUTURE_RESPONSE
* SEC_ERROR_OCSP_OLD_RESPONSE
* SEC_ERROR_OCSP_UNAUTHORIZED_RESPONSE
* Other errors are low-level problems (no memory, bad database, etc.).
*/
static SECStatus
ocsp_VerifySingleResponse(CERTOCSPSingleResponse *single,
CERTCertDBHandle *handle,
CERTCertificate *signerCert,
int64 producedAt)
{
CERTOCSPCertID *certID = single->certID;
int64 now, thisUpdate, nextUpdate, tmstamp, tmp;
SECStatus rv;
OCSP_TRACE(("OCSP ocsp_VerifySingleResponse, nextUpdate: %d\n",
((single->nextUpdate) != 0)));
/*
* If all the responder said was that the given cert was unknown to it,
* that is a valid response. Not very interesting to us, of course,
* but all this function is concerned with is validity of the response,
* not the status of the cert.
*/
PORT_Assert(single->certStatus != NULL);
if (single->certStatus->certStatusType == ocspCertStatus_unknown)
return SECSuccess;
/*
* We need to extract "thisUpdate" for use below and to pass along
* to AuthorizedResponderForCertID in case it needs it for doing an
* issuer look-up.
*/
rv = DER_GeneralizedTimeToTime(&thisUpdate, &single->thisUpdate);
if (rv != SECSuccess)
return rv;
/*
* First confirm that signerCert is authorized to give this status.
*/
if (ocsp_AuthorizedResponderForCertID(handle, signerCert, certID,
thisUpdate) != PR_TRUE)
return SECFailure;
/*
* Now check the time stuff, as described above.
*/
now = PR_Now();
/* allow slop time for future response */
LL_UI2L(tmstamp, ocspsloptime); /* get slop time in seconds */
LL_UI2L(tmp, PR_USEC_PER_SEC);
LL_MUL(tmp, tmstamp, tmp); /* convert the slop time to PRTime */
LL_ADD(tmstamp, tmp, now); /* add current time to it */
if (LL_CMP(thisUpdate, >, tmstamp) || LL_CMP(producedAt, <, thisUpdate)) {
PORT_SetError(SEC_ERROR_OCSP_FUTURE_RESPONSE);
return SECFailure;
}
if (single->nextUpdate != NULL) {
rv = DER_GeneralizedTimeToTime(&nextUpdate, single->nextUpdate);
if (rv != SECSuccess)
return rv;
LL_ADD(tmp, tmp, nextUpdate);
if (LL_CMP(tmp, <, now) || LL_CMP(producedAt, >, nextUpdate)) {
PORT_SetError(SEC_ERROR_OCSP_OLD_RESPONSE);
return SECFailure;
}
} else if (ocsp_TimeIsRecent(thisUpdate) != PR_TRUE) {
PORT_SetError(SEC_ERROR_OCSP_OLD_RESPONSE);
return SECFailure;
}
return SECSuccess;
}
/*
* FUNCTION: CERT_GetOCSPAuthorityInfoAccessLocation
* Get the value of the URI of the OCSP responder for the given cert.
* This is found in the (optional) Authority Information Access extension
* in the cert.
* INPUTS:
* CERTCertificate *cert
* The certificate being examined.
* RETURN:
* char *
* A copy of the URI for the OCSP method, if found. If either the
* extension is not present or it does not contain an entry for OCSP,
* SEC_ERROR_CERT_BAD_ACCESS_LOCATION will be set and a NULL returned.
* Any other error will also result in a NULL being returned.
*
* This result should be freed (via PORT_Free) when no longer in use.
*/
char *
CERT_GetOCSPAuthorityInfoAccessLocation(CERTCertificate *cert)
{
CERTGeneralName *locname = NULL;
SECItem *location = NULL;
SECItem *encodedAuthInfoAccess = NULL;
CERTAuthInfoAccess **authInfoAccess = NULL;
char *locURI = NULL;
PRArenaPool *arena = NULL;
SECStatus rv;
int i;
/*
* Allocate this one from the heap because it will get filled in
* by CERT_FindCertExtension which will also allocate from the heap,
* and we can free the entire thing on our way out.
*/
encodedAuthInfoAccess = SECITEM_AllocItem(NULL, NULL, 0);
if (encodedAuthInfoAccess == NULL)
goto loser;
rv = CERT_FindCertExtension(cert, SEC_OID_X509_AUTH_INFO_ACCESS,
encodedAuthInfoAccess);
if (rv == SECFailure) {
PORT_SetError(SEC_ERROR_CERT_BAD_ACCESS_LOCATION);
goto loser;
}
/*
* The rest of the things allocated in the routine will come out of
* this arena, which is temporary just for us to decode and get at the
* AIA extension. The whole thing will be destroyed on our way out,
* after we have copied the location string (url) itself (if found).
*/
arena = PORT_NewArena(DER_DEFAULT_CHUNKSIZE);
if (arena == NULL)
goto loser;
authInfoAccess = CERT_DecodeAuthInfoAccessExtension(arena,
encodedAuthInfoAccess);
if (authInfoAccess == NULL)
goto loser;
for (i = 0; authInfoAccess[i] != NULL; i++) {
if (SECOID_FindOIDTag(&authInfoAccess[i]->method) == SEC_OID_PKIX_OCSP)
locname = authInfoAccess[i]->location;
}
/*
* If we found an AIA extension, but it did not include an OCSP method,
* that should look to our caller as if we did not find the extension
* at all, because it is only an OCSP method that we care about.
* So set the same error that would be set if the AIA extension was
* not there at all.
*/
if (locname == NULL) {
PORT_SetError(SEC_ERROR_CERT_BAD_ACCESS_LOCATION);
goto loser;
}
/*
* The following is just a pointer back into locname (i.e. not a copy);
* thus it should not be freed.
*/
location = CERT_GetGeneralNameByType(locname, certURI, PR_FALSE);
if (location == NULL) {
/*
* XXX Appears that CERT_GetGeneralNameByType does not set an
* error if there is no name by that type. For lack of anything
* better, act as if the extension was not found. In the future
* this should probably be something more like the extension was
* badly formed.
*/
PORT_SetError(SEC_ERROR_CERT_BAD_ACCESS_LOCATION);
goto loser;
}
/*
* That location is really a string, but it has a specified length
* without a null-terminator. We need a real string that does have
* a null-terminator, and we need a copy of it anyway to return to
* our caller -- so allocate and copy.
*/
locURI = PORT_Alloc(location->len + 1);
if (locURI == NULL) {
goto loser;
}
PORT_Memcpy(locURI, location->data, location->len);
locURI[location->len] = '\0';
loser:
if (arena != NULL)
PORT_FreeArena(arena, PR_FALSE);
if (encodedAuthInfoAccess != NULL)
SECITEM_FreeItem(encodedAuthInfoAccess, PR_TRUE);
return locURI;
}
/*
* Figure out where we should go to find out the status of the given cert
* via OCSP. If allowed to use a default responder uri and a default
* responder is set up, then that is our answer.
* If not, see if the certificate has an Authority Information Access (AIA)
* extension for OCSP, and return the value of that. Otherwise return NULL.
* We also let our caller know whether or not the responder chosen was
* a default responder or not through the output variable isDefault;
* its value has no meaning unless a good (non-null) value is returned
* for the location.
*
* The result needs to be freed (PORT_Free) when no longer in use.
*/
char *
ocsp_GetResponderLocation(CERTCertDBHandle *handle, CERTCertificate *cert,
PRBool canUseDefault, PRBool *isDefault)
{
ocspCheckingContext *ocspcx = NULL;
char *ocspUrl = NULL;
if (canUseDefault) {
ocspcx = ocsp_GetCheckingContext(handle);
}
if (ocspcx != NULL && ocspcx->useDefaultResponder) {
/*
* A default responder wins out, if specified.
* XXX Someday this may be a more complicated determination based
* on the cert's issuer. (That is, we could have different default
* responders configured for different issuers.)
*/
PORT_Assert(ocspcx->defaultResponderURI != NULL);
*isDefault = PR_TRUE;
return (PORT_Strdup(ocspcx->defaultResponderURI));
}
/*
* No default responder set up, so go see if we can find an AIA
* extension that has a value for OCSP, and get the url from that.
*/
*isDefault = PR_FALSE;
ocspUrl = CERT_GetOCSPAuthorityInfoAccessLocation(cert);
if (!ocspUrl) {
CERT_StringFromCertFcn altFcn;
PR_EnterMonitor(OCSP_Global.monitor);
altFcn = OCSP_Global.alternateOCSPAIAFcn;
PR_ExitMonitor(OCSP_Global.monitor);
if (altFcn) {
ocspUrl = (*altFcn)(cert);
if (ocspUrl)
*isDefault = PR_TRUE;
}
}
return ocspUrl;
}
/*
* Return SECSuccess if the cert was revoked *after* "time",
* SECFailure otherwise.
*/
static SECStatus
ocsp_CertRevokedAfter(ocspRevokedInfo *revokedInfo, int64 time)
{
int64 revokedTime;
SECStatus rv;
rv = DER_GeneralizedTimeToTime(&revokedTime, &revokedInfo->revocationTime);
if (rv != SECSuccess)
return rv;
/*
* Set the error even if we will return success; someone might care.
*/
PORT_SetError(SEC_ERROR_REVOKED_CERTIFICATE);
if (LL_CMP(revokedTime, >, time))
return SECSuccess;
return SECFailure;
}
/*
* See if the cert represented in the single response had a good status
* at the specified time.
*/
static SECStatus
ocsp_CertHasGoodStatus(ocspCertStatus *status, int64 time)
{
SECStatus rv;
switch (status->certStatusType) {
case ocspCertStatus_good:
rv = SECSuccess;
break;
case ocspCertStatus_revoked:
rv = ocsp_CertRevokedAfter(status->certStatusInfo.revokedInfo, time);
break;
case ocspCertStatus_unknown:
PORT_SetError(SEC_ERROR_OCSP_UNKNOWN_CERT);
rv = SECFailure;
break;
case ocspCertStatus_other:
default:
PORT_Assert(0);
PORT_SetError(SEC_ERROR_OCSP_MALFORMED_RESPONSE);
rv = SECFailure;
break;
}
return rv;
}
static SECStatus
ocsp_SingleResponseCertHasGoodStatus(CERTOCSPSingleResponse *single,
int64 time)
{
return ocsp_CertHasGoodStatus(single->certStatus, time);
}
/* Return value SECFailure means: not found or not fresh.
* On SECSuccess, the out parameters contain the OCSP status.
* rvOcsp contains the overall result of the OCSP operation.
* Depending on input parameter ignoreGlobalOcspFailureSetting,
* a soft failure might be converted into *rvOcsp=SECSuccess.
* If the cached attempt to obtain OCSP information had resulted
* in a failure, missingResponseError shows the error code of
* that failure.
*/
SECStatus
ocsp_GetCachedOCSPResponseStatusIfFresh(CERTOCSPCertID *certID,
int64 time,
PRBool ignoreGlobalOcspFailureSetting,
SECStatus *rvOcsp,
SECErrorCodes *missingResponseError)
{
OCSPCacheItem *cacheItem = NULL;
SECStatus rv = SECFailure;
if (!certID || !missingResponseError || !rvOcsp) {
PORT_SetError(SEC_ERROR_INVALID_ARGS);
return SECFailure;
}
*rvOcsp = SECFailure;
*missingResponseError = 0;
PR_EnterMonitor(OCSP_Global.monitor);
cacheItem = ocsp_FindCacheEntry(&OCSP_Global.cache, certID);
if (cacheItem && ocsp_IsCacheItemFresh(cacheItem)) {
/* having an arena means, we have a cached certStatus */
if (cacheItem->certStatusArena) {
*rvOcsp = ocsp_CertHasGoodStatus(&cacheItem->certStatus, time);
rv = SECSuccess;
} else {
/*
* No status cached, the previous attempt failed.
* If OCSP is required, we never decide based on a failed attempt
* However, if OCSP is optional, a recent OCSP failure is
* an allowed good state.
*/
if (!ignoreGlobalOcspFailureSetting &&
OCSP_Global.ocspFailureMode ==
ocspMode_FailureIsNotAVerificationFailure) {
rv = SECSuccess;
*rvOcsp = SECSuccess;
}
*missingResponseError = cacheItem->missingResponseError;
}
}
PR_ExitMonitor(OCSP_Global.monitor);
return rv;
}
PRBool
ocsp_FetchingFailureIsVerificationFailure()
{
PRBool isFailure;
PR_EnterMonitor(OCSP_Global.monitor);
isFailure =
OCSP_Global.ocspFailureMode == ocspMode_FailureIsVerificationFailure;
PR_ExitMonitor(OCSP_Global.monitor);
return isFailure;
}
/*
* FUNCTION: CERT_CheckOCSPStatus
* Checks the status of a certificate via OCSP. Will only check status for
* a certificate that has an AIA (Authority Information Access) extension
* for OCSP *or* when a "default responder" is specified and enabled.
* (If no AIA extension for OCSP and no default responder in place, the
* cert is considered to have a good status and SECSuccess is returned.)
* INPUTS:
* CERTCertDBHandle *handle
* certificate DB of the cert that is being checked
* CERTCertificate *cert
* the certificate being checked
* XXX in the long term also need a boolean parameter that specifies
* whether to check the cert chain, as well; for now we check only
* the leaf (the specified certificate)
* int64 time
* time for which status is to be determined
* void *pwArg
* argument for password prompting, if needed
* RETURN:
* Returns SECSuccess if an approved OCSP responder "knows" the cert
* *and* returns a non-revoked status for it; SECFailure otherwise,
* with an error set describing the reason:
*
* SEC_ERROR_OCSP_BAD_HTTP_RESPONSE
* SEC_ERROR_OCSP_FUTURE_RESPONSE
* SEC_ERROR_OCSP_MALFORMED_REQUEST
* SEC_ERROR_OCSP_MALFORMED_RESPONSE
* SEC_ERROR_OCSP_OLD_RESPONSE
* SEC_ERROR_OCSP_REQUEST_NEEDS_SIG
* SEC_ERROR_OCSP_SERVER_ERROR
* SEC_ERROR_OCSP_TRY_SERVER_LATER
* SEC_ERROR_OCSP_UNAUTHORIZED_REQUEST
* SEC_ERROR_OCSP_UNAUTHORIZED_RESPONSE
* SEC_ERROR_OCSP_UNKNOWN_CERT
* SEC_ERROR_OCSP_UNKNOWN_RESPONSE_STATUS
* SEC_ERROR_OCSP_UNKNOWN_RESPONSE_TYPE
*
* SEC_ERROR_BAD_SIGNATURE
* SEC_ERROR_CERT_BAD_ACCESS_LOCATION
* SEC_ERROR_INVALID_TIME
* SEC_ERROR_REVOKED_CERTIFICATE
* SEC_ERROR_UNKNOWN_ISSUER
* SEC_ERROR_UNKNOWN_SIGNER
*
* Other errors are any of the many possible failures in cert verification
* (e.g. SEC_ERROR_REVOKED_CERTIFICATE, SEC_ERROR_UNTRUSTED_ISSUER) when
* verifying the signer's cert, or low-level problems (error allocating
* memory, error performing ASN.1 decoding, etc.).
*/
SECStatus
CERT_CheckOCSPStatus(CERTCertDBHandle *handle, CERTCertificate *cert,
int64 time, void *pwArg)
{
CERTOCSPCertID *certID;
PRBool certIDWasConsumed = PR_FALSE;
SECStatus rv = SECFailure;
SECStatus rvOcsp;
SECErrorCodes dummy_error_code; /* we ignore this */
OCSP_TRACE_CERT(cert);
OCSP_TRACE_TIME("## requested validity time:", time);
certID = CERT_CreateOCSPCertID(cert, time);
if (!certID)
return SECFailure;
rv = ocsp_GetCachedOCSPResponseStatusIfFresh(
certID, time, PR_FALSE, /* ignoreGlobalOcspFailureSetting */
&rvOcsp, &dummy_error_code);
if (rv == SECSuccess) {
CERT_DestroyOCSPCertID(certID);
return rvOcsp;
}
rv = ocsp_GetOCSPStatusFromNetwork(handle, certID, cert, time, pwArg,
&certIDWasConsumed,
&rvOcsp);
if (rv != SECSuccess) {
/* we were unable to obtain ocsp status. Check if we should
* return cert status revoked. */
rvOcsp = ocsp_FetchingFailureIsVerificationFailure() ?
SECFailure : SECSuccess;
}
if (!certIDWasConsumed) {
CERT_DestroyOCSPCertID(certID);
}
return rvOcsp;
}
/*
* Status in *certIDWasConsumed will always be correct, regardless of
* return value.
*/
static SECStatus
ocsp_GetOCSPStatusFromNetwork(CERTCertDBHandle *handle,
CERTOCSPCertID *certID,
CERTCertificate *cert,
int64 time,
void *pwArg,
PRBool *certIDWasConsumed,
SECStatus *rv_ocsp)
{
char *location = NULL;
PRBool locationIsDefault;
SECItem *encodedResponse = NULL;
CERTOCSPRequest *request = NULL;
CERTOCSPResponse *response = NULL;
CERTCertificate *signerCert = NULL;
CERTCertificate *issuerCert = NULL;
SECStatus rv = SECFailure;
CERTOCSPSingleResponse *single = NULL;
if (!certIDWasConsumed || !rv_ocsp) {
PORT_SetError(SEC_ERROR_INVALID_ARGS);
return SECFailure;
}
*certIDWasConsumed = PR_FALSE;
*rv_ocsp = SECFailure;
/*
* The first thing we need to do is find the location of the responder.
* This will be the value of the default responder (if enabled), else
* it will come out of the AIA extension in the cert (if present).
* If we have no such location, then this cert does not "deserve" to
* be checked -- that is, we consider it a success and just return.
* The way we tell that is by looking at the error number to see if
* the problem was no AIA extension was found; any other error was
* a true failure that we unfortunately have to treat as an overall
* failure here.
*/
location = ocsp_GetResponderLocation(handle, cert, PR_TRUE,
&locationIsDefault);
if (location == NULL) {
int err = PORT_GetError();
if (err == SEC_ERROR_EXTENSION_NOT_FOUND ||
err == SEC_ERROR_CERT_BAD_ACCESS_LOCATION) {
PORT_SetError(0);
*rv_ocsp = SECSuccess;
return SECSuccess;
}
return SECFailure;
}
/*
* XXX In the fullness of time, we will want/need to handle a
* certificate chain. This will be done either when a new parameter
* tells us to, or some configuration variable tells us to. In any
* case, handling it is complicated because we may need to send as
* many requests (and receive as many responses) as we have certs
* in the chain. If we are going to talk to a default responder,
* and we only support one default responder, we can put all of the
* certs together into one request. Otherwise, we must break them up
* into multiple requests. (Even if all of the requests will go to
* the same location, the signature on each response will be different,
* because each issuer is different. Carefully read the OCSP spec
* if you do not understand this.)
*/
/*
* XXX If/when signing of requests is supported, that second NULL
* should be changed to be the signer certificate. Not sure if that
* should be passed into this function or retrieved via some operation
* on the handle/context.
*/
encodedResponse =
ocsp_GetEncodedOCSPResponseForSingleCert(NULL, certID, cert, location,
time, locationIsDefault,
pwArg, &request);
if (encodedResponse == NULL) {
goto loser;
}
response = CERT_DecodeOCSPResponse(encodedResponse);
if (response == NULL) {
goto loser;
}
/*
* Okay, we at least have a response that *looks* like a response!
* Now see if the overall response status value is good or not.
* If not, we set an error and give up. (It means that either the
* server had a problem, or it didn't like something about our
* request. Either way there is nothing to do but give up.)
* Otherwise, we continue to find the actual per-cert status
* in the response.
*/
if (CERT_GetOCSPResponseStatus(response) != SECSuccess) {
goto loser;
}
/*
* If we've made it this far, we expect a response with a good signature.
* So, check for that.
*/
issuerCert = CERT_FindCertIssuer(cert, time, certUsageAnyCA);
rv = CERT_VerifyOCSPResponseSignature(response, handle, pwArg, &signerCert,
issuerCert);
if (rv != SECSuccess)
goto loser;
PORT_Assert(signerCert != NULL); /* internal consistency check */
/* XXX probably should set error, return failure if signerCert is null */
/*
* Again, we are only doing one request for one cert.
* XXX When we handle cert chains, the following code will obviously
* have to be modified, in coordation with the code above that will
* have to determine how to make multiple requests, etc.
*/
rv = ocsp_GetVerifiedSingleResponseForCertID(handle, response, certID,
signerCert, time, &single);
if (rv != SECSuccess)
goto loser;
*rv_ocsp = ocsp_SingleResponseCertHasGoodStatus(single, time);
loser:
PR_EnterMonitor(OCSP_Global.monitor);
if (OCSP_Global.maxCacheEntries >= 0) {
/* single == NULL means: remember response failure */
ocsp_CreateOrUpdateCacheEntry(&OCSP_Global.cache, certID, single,
certIDWasConsumed);
/* ignore cache update failures */
}
PR_ExitMonitor(OCSP_Global.monitor);
if (issuerCert != NULL)
CERT_DestroyCertificate(issuerCert);
if (signerCert != NULL)
CERT_DestroyCertificate(signerCert);
if (response != NULL)
CERT_DestroyOCSPResponse(response);
if (request != NULL)
CERT_DestroyOCSPRequest(request);
if (encodedResponse != NULL)
SECITEM_FreeItem(encodedResponse, PR_TRUE);
if (location != NULL)
PORT_Free(location);
return rv;
}
static SECStatus
ocsp_GetVerifiedSingleResponseForCertID(CERTCertDBHandle *handle,
CERTOCSPResponse *response,
CERTOCSPCertID *certID,
CERTCertificate *signerCert,
int64 time,
CERTOCSPSingleResponse
**pSingleResponse)
{
SECStatus rv;
ocspResponseData *responseData;
int64 producedAt;
CERTOCSPSingleResponse *single;
/*
* The ResponseData part is the real guts of the response.
*/
responseData = ocsp_GetResponseData(response, NULL);
if (responseData == NULL) {
rv = SECFailure;
goto loser;
}
/*
* There is one producedAt time for the entire response (and a separate
* thisUpdate time for each individual single response). We need to
* compare them, so get the overall time to pass into the check of each
* single response.
*/
rv = DER_GeneralizedTimeToTime(&producedAt, &responseData->producedAt);
if (rv != SECSuccess)
goto loser;
single = ocsp_GetSingleResponseForCertID(responseData->responses,
handle, certID);
if (single == NULL) {
rv = SECFailure;
goto loser;
}
rv = ocsp_VerifySingleResponse(single, handle, signerCert, producedAt);
if (rv != SECSuccess)
goto loser;
*pSingleResponse = single;
loser:
return rv;
}
SECStatus
CERT_GetOCSPStatusForCertID(CERTCertDBHandle *handle,
CERTOCSPResponse *response,
CERTOCSPCertID *certID,
CERTCertificate *signerCert,
int64 time)
{
/*
* We do not update the cache, because:
*
* CERT_GetOCSPStatusForCertID is an old exported API that was introduced
* before the OCSP cache got implemented.
*
* The implementation of helper function cert_ProcessOCSPResponse
* requires the ability to transfer ownership of the the given certID to
* the cache. The external API doesn't allow us to prevent the caller from
* destroying the certID. We don't have the original certificate available,
* therefore we are unable to produce another certID object (that could
* be stored in the cache).
*
* Should we ever implement code to produce a deep copy of certID,
* then this could be changed to allow updating the cache.
* The duplication would have to be done in
* cert_ProcessOCSPResponse, if the out parameter to indicate
* a transfer of ownership is NULL.
*/
return cert_ProcessOCSPResponse(handle, response, certID,
signerCert, time,
NULL, NULL);
}
/*
* The first 5 parameters match the definition of CERT_GetOCSPStatusForCertID.
*/
SECStatus
cert_ProcessOCSPResponse(CERTCertDBHandle *handle,
CERTOCSPResponse *response,
CERTOCSPCertID *certID,
CERTCertificate *signerCert,
int64 time,
PRBool *certIDWasConsumed,
SECStatus *cacheUpdateStatus)
{
SECStatus rv;
SECStatus rv_cache;
CERTOCSPSingleResponse *single = NULL;
rv = ocsp_GetVerifiedSingleResponseForCertID(handle, response, certID,
signerCert, time, &single);
if (rv == SECSuccess) {
/*
* Check whether the status says revoked, and if so
* how that compares to the time value passed into this routine.
*/
rv = ocsp_SingleResponseCertHasGoodStatus(single, time);
}
if (certIDWasConsumed) {
/*
* We don't have copy-of-certid implemented. In order to update
* the cache, the caller must supply an out variable
* certIDWasConsumed, allowing us to return ownership status.
*/
PR_EnterMonitor(OCSP_Global.monitor);
if (OCSP_Global.maxCacheEntries >= 0) {
/* single == NULL means: remember response failure */
rv_cache =
ocsp_CreateOrUpdateCacheEntry(&OCSP_Global.cache, certID,
single, certIDWasConsumed);
}
PR_ExitMonitor(OCSP_Global.monitor);
if (cacheUpdateStatus) {
*cacheUpdateStatus = rv_cache;
}
}
return rv;
}
SECStatus
cert_RememberOCSPProcessingFailure(CERTOCSPCertID *certID,
PRBool *certIDWasConsumed)
{
SECStatus rv = SECSuccess;
PR_EnterMonitor(OCSP_Global.monitor);
if (OCSP_Global.maxCacheEntries >= 0) {
rv = ocsp_CreateOrUpdateCacheEntry(&OCSP_Global.cache, certID, NULL,
certIDWasConsumed);
}
PR_ExitMonitor(OCSP_Global.monitor);
return rv;
}
/*
* Disable status checking and destroy related structures/data.
*/
static SECStatus
ocsp_DestroyStatusChecking(CERTStatusConfig *statusConfig)
{
ocspCheckingContext *statusContext;
/*
* Disable OCSP checking
*/
statusConfig->statusChecker = NULL;
statusContext = statusConfig->statusContext;
PORT_Assert(statusContext != NULL);
if (statusContext == NULL)
return SECFailure;
if (statusContext->defaultResponderURI != NULL)
PORT_Free(statusContext->defaultResponderURI);
if (statusContext->defaultResponderNickname != NULL)
PORT_Free(statusContext->defaultResponderNickname);
PORT_Free(statusContext);
statusConfig->statusContext = NULL;
PORT_Free(statusConfig);
return SECSuccess;
}
/*
* FUNCTION: CERT_DisableOCSPChecking
* Turns off OCSP checking for the given certificate database.
* This routine disables OCSP checking. Though it will return
* SECFailure if OCSP checking is not enabled, it is "safe" to
* call it that way and just ignore the return value, if it is
* easier to just call it than to "remember" whether it is enabled.
* INPUTS:
* CERTCertDBHandle *handle
* Certificate database for which OCSP checking will be disabled.
* RETURN:
* Returns SECFailure if an error occurred (usually means that OCSP
* checking was not enabled or status contexts were not initialized --
* error set will be SEC_ERROR_OCSP_NOT_ENABLED); SECSuccess otherwise.
*/
SECStatus
CERT_DisableOCSPChecking(CERTCertDBHandle *handle)
{
CERTStatusConfig *statusConfig;
ocspCheckingContext *statusContext;
if (handle == NULL) {
PORT_SetError(SEC_ERROR_INVALID_ARGS);
return SECFailure;
}
statusConfig = CERT_GetStatusConfig(handle);
statusContext = ocsp_GetCheckingContext(handle);
if (statusContext == NULL)
return SECFailure;
if (statusConfig->statusChecker != CERT_CheckOCSPStatus) {
/*
* Status configuration is present, but either not currently
* enabled or not for OCSP.
*/
PORT_SetError(SEC_ERROR_OCSP_NOT_ENABLED);
return SECFailure;
}
/* cache no longer necessary */
CERT_ClearOCSPCache();
/*
* This is how we disable status checking. Everything else remains
* in place in case we are enabled again.
*/
statusConfig->statusChecker = NULL;
return SECSuccess;
}
/*
* Allocate and initialize the informational structures for status checking.
* This is done when some configuration of OCSP is being done or when OCSP
* checking is being turned on, whichever comes first.
*/
static SECStatus
ocsp_InitStatusChecking(CERTCertDBHandle *handle)
{
CERTStatusConfig *statusConfig = NULL;
ocspCheckingContext *statusContext = NULL;
PORT_Assert(CERT_GetStatusConfig(handle) == NULL);
if (CERT_GetStatusConfig(handle) != NULL) {
/* XXX or call statusConfig->statusDestroy and continue? */
return SECFailure;
}
statusConfig = PORT_ZNew(CERTStatusConfig);
if (statusConfig == NULL)
goto loser;
statusContext = PORT_ZNew(ocspCheckingContext);
if (statusContext == NULL)
goto loser;
statusConfig->statusDestroy = ocsp_DestroyStatusChecking;
statusConfig->statusContext = statusContext;
CERT_SetStatusConfig(handle, statusConfig);
return SECSuccess;
loser:
if (statusConfig != NULL)
PORT_Free(statusConfig);
return SECFailure;
}
/*
* FUNCTION: CERT_EnableOCSPChecking
* Turns on OCSP checking for the given certificate database.
* INPUTS:
* CERTCertDBHandle *handle
* Certificate database for which OCSP checking will be enabled.
* RETURN:
* Returns SECFailure if an error occurred (likely only problem
* allocating memory); SECSuccess otherwise.
*/
SECStatus
CERT_EnableOCSPChecking(CERTCertDBHandle *handle)
{
CERTStatusConfig *statusConfig;
SECStatus rv;
if (handle == NULL) {
PORT_SetError(SEC_ERROR_INVALID_ARGS);
return SECFailure;
}
statusConfig = CERT_GetStatusConfig(handle);
if (statusConfig == NULL) {
rv = ocsp_InitStatusChecking(handle);
if (rv != SECSuccess)
return rv;
/* Get newly established value */
statusConfig = CERT_GetStatusConfig(handle);
PORT_Assert(statusConfig != NULL);
}
/*
* Setting the checker function is what really enables the checking
* when each cert verification is done.
*/
statusConfig->statusChecker = CERT_CheckOCSPStatus;
return SECSuccess;
}
/*
* FUNCTION: CERT_SetOCSPDefaultResponder
* Specify the location and cert of the default responder.
* If OCSP checking is already enabled *and* use of a default responder
* is also already enabled, all OCSP checking from now on will go directly
* to the specified responder. If OCSP checking is not enabled, or if
* it is but use of a default responder is not enabled, the information
* will be recorded and take effect whenever both are enabled.
* INPUTS:
* CERTCertDBHandle *handle
* Cert database on which OCSP checking should use the default responder.
* char *url
* The location of the default responder (e.g. "http://foo.com:80/ocsp")
* Note that the location will not be tested until the first attempt
* to send a request there.
* char *name
* The nickname of the cert to trust (expected) to sign the OCSP responses.
* If the corresponding cert cannot be found, SECFailure is returned.
* RETURN:
* Returns SECFailure if an error occurred; SECSuccess otherwise.
* The most likely error is that the cert for "name" could not be found
* (probably SEC_ERROR_UNKNOWN_CERT). Other errors are low-level (no memory,
* bad database, etc.).
*/
SECStatus
CERT_SetOCSPDefaultResponder(CERTCertDBHandle *handle,
const char *url, const char *name)
{
CERTCertificate *cert;
ocspCheckingContext *statusContext;
char *url_copy = NULL;
char *name_copy = NULL;
SECStatus rv;
if (handle == NULL || url == NULL || name == NULL) {
/*
* XXX When interface is exported, probably want better errors;
* perhaps different one for each parameter.
*/
PORT_SetError(SEC_ERROR_INVALID_ARGS);
return SECFailure;
}
/*
* Find the certificate for the specified nickname. Do this first
* because it seems the most likely to fail.
*
* XXX Shouldn't need that cast if the FindCertByNickname interface
* used const to convey that it does not modify the name. Maybe someday.
*/
cert = CERT_FindCertByNickname(handle, (char *) name);
if (cert == NULL) {
/*
* look for the cert on an external token.
*/
cert = PK11_FindCertFromNickname((char *)name, NULL);
}
if (cert == NULL)
return SECFailure;
/*
* Make a copy of the url and nickname.
*/
url_copy = PORT_Strdup(url);
name_copy = PORT_Strdup(name);
if (url_copy == NULL || name_copy == NULL) {
rv = SECFailure;
goto loser;
}
statusContext = ocsp_GetCheckingContext(handle);
/*
* Allocate and init the context if it doesn't already exist.
*/
if (statusContext == NULL) {
rv = ocsp_InitStatusChecking(handle);
if (rv != SECSuccess)
goto loser;
statusContext = ocsp_GetCheckingContext(handle);
PORT_Assert(statusContext != NULL); /* extreme paranoia */
}
/*
* Note -- we do not touch the status context until after all of
* the steps which could cause errors. If something goes wrong,
* we want to leave things as they were.
*/
/*
* Get rid of old url and name if there.
*/
if (statusContext->defaultResponderNickname != NULL)
PORT_Free(statusContext->defaultResponderNickname);
if (statusContext->defaultResponderURI != NULL)
PORT_Free(statusContext->defaultResponderURI);
/*
* And replace them with the new ones.
*/
statusContext->defaultResponderURI = url_copy;
statusContext->defaultResponderNickname = name_copy;
/*
* If there was already a cert in place, get rid of it and replace it.
* Otherwise, we are not currently enabled, so we don't want to save it;
* it will get re-found and set whenever use of a default responder is
* enabled.
*/
if (statusContext->defaultResponderCert != NULL) {
CERT_DestroyCertificate(statusContext->defaultResponderCert);
statusContext->defaultResponderCert = cert;
/*OCSP enabled, switching responder: clear cache*/
CERT_ClearOCSPCache();
} else {
PORT_Assert(statusContext->useDefaultResponder == PR_FALSE);
CERT_DestroyCertificate(cert);
/*OCSP currently not enabled, no need to clear cache*/
}
return SECSuccess;
loser:
CERT_DestroyCertificate(cert);
if (url_copy != NULL)
PORT_Free(url_copy);
if (name_copy != NULL)
PORT_Free(name_copy);
return rv;
}
/*
* FUNCTION: CERT_EnableOCSPDefaultResponder
* Turns on use of a default responder when OCSP checking.
* If OCSP checking is already enabled, this will make subsequent checks
* go directly to the default responder. (The location of the responder
* and the nickname of the responder cert must already be specified.)
* If OCSP checking is not enabled, this will be recorded and take effect
* whenever it is enabled.
* INPUTS:
* CERTCertDBHandle *handle
* Cert database on which OCSP checking should use the default responder.
* RETURN:
* Returns SECFailure if an error occurred; SECSuccess otherwise.
* No errors are especially likely unless the caller did not previously
* perform a successful call to SetOCSPDefaultResponder (in which case
* the error set will be SEC_ERROR_OCSP_NO_DEFAULT_RESPONDER).
*/
SECStatus
CERT_EnableOCSPDefaultResponder(CERTCertDBHandle *handle)
{
ocspCheckingContext *statusContext;
CERTCertificate *cert;
SECStatus rv;
SECCertificateUsage usage;
if (handle == NULL) {
PORT_SetError(SEC_ERROR_INVALID_ARGS);
return SECFailure;
}
statusContext = ocsp_GetCheckingContext(handle);
if (statusContext == NULL) {
/*
* Strictly speaking, the error already set is "correct",
* but cover over it with one more helpful in this context.
*/
PORT_SetError(SEC_ERROR_OCSP_NO_DEFAULT_RESPONDER);
return SECFailure;
}
if (statusContext->defaultResponderURI == NULL) {
PORT_SetError(SEC_ERROR_OCSP_NO_DEFAULT_RESPONDER);
return SECFailure;
}
if (statusContext->defaultResponderNickname == NULL) {
PORT_SetError(SEC_ERROR_OCSP_NO_DEFAULT_RESPONDER);
return SECFailure;
}
/*
* Find the cert for the nickname.
*/
cert = CERT_FindCertByNickname(handle,
statusContext->defaultResponderNickname);
if (cert == NULL) {
cert = PK11_FindCertFromNickname(statusContext->defaultResponderNickname,
NULL);
}
/*
* We should never have trouble finding the cert, because its
* existence should have been proven by SetOCSPDefaultResponder.
*/
PORT_Assert(cert != NULL);
if (cert == NULL)
return SECFailure;
/*
* Supplied cert should at least have a signing capability in order for us
* to use it as a trusted responder cert. Ability to sign is guaranteed if
* cert is validated to have any set of the usages below.
*/
rv = CERT_VerifyCertificateNow(handle, cert, PR_TRUE,
certificateUsageCheckAllUsages,
NULL, &usage);
if (rv != SECSuccess || (usage & (certificateUsageSSLClient |
certificateUsageSSLServer |
certificateUsageSSLServerWithStepUp |
certificateUsageEmailSigner |
certificateUsageObjectSigner |
certificateUsageStatusResponder |
certificateUsageSSLCA)) == 0) {
PORT_SetError(SEC_ERROR_OCSP_RESPONDER_CERT_INVALID);
return SECFailure;
}
/*
* And hang onto it.
*/
statusContext->defaultResponderCert = cert;
/* we don't allow a mix of cache entries from different responders */
CERT_ClearOCSPCache();
/*
* Finally, record the fact that we now have a default responder enabled.
*/
statusContext->useDefaultResponder = PR_TRUE;
return SECSuccess;
}
/*
* FUNCTION: CERT_DisableOCSPDefaultResponder
* Turns off use of a default responder when OCSP checking.
* (Does nothing if use of a default responder is not enabled.)
* INPUTS:
* CERTCertDBHandle *handle
* Cert database on which OCSP checking should stop using a default
* responder.
* RETURN:
* Returns SECFailure if an error occurred; SECSuccess otherwise.
* Errors very unlikely (like random memory corruption...).
*/
SECStatus
CERT_DisableOCSPDefaultResponder(CERTCertDBHandle *handle)
{
CERTStatusConfig *statusConfig;
ocspCheckingContext *statusContext;
CERTCertificate *tmpCert;
if (handle == NULL) {
PORT_SetError(SEC_ERROR_INVALID_ARGS);
return SECFailure;
}
statusConfig = CERT_GetStatusConfig(handle);
if (statusConfig == NULL)
return SECSuccess;
statusContext = ocsp_GetCheckingContext(handle);
PORT_Assert(statusContext != NULL);
if (statusContext == NULL)
return SECFailure;
tmpCert = statusContext->defaultResponderCert;
if (tmpCert) {
statusContext->defaultResponderCert = NULL;
CERT_DestroyCertificate(tmpCert);
/* we don't allow a mix of cache entries from different responders */
CERT_ClearOCSPCache();
}
/*
* Finally, record the fact.
*/
statusContext->useDefaultResponder = PR_FALSE;
return SECSuccess;
}
SECStatus
CERT_GetOCSPResponseStatus(CERTOCSPResponse *response)
{
PORT_Assert(response);
if (response->statusValue == ocspResponse_successful)
return SECSuccess;
switch (response->statusValue) {
case ocspResponse_malformedRequest:
PORT_SetError(SEC_ERROR_OCSP_MALFORMED_REQUEST);
break;
case ocspResponse_internalError:
PORT_SetError(SEC_ERROR_OCSP_SERVER_ERROR);
break;
case ocspResponse_tryLater:
PORT_SetError(SEC_ERROR_OCSP_TRY_SERVER_LATER);
break;
case ocspResponse_sigRequired:
/* XXX We *should* retry with a signature, if possible. */
PORT_SetError(SEC_ERROR_OCSP_REQUEST_NEEDS_SIG);
break;
case ocspResponse_unauthorized:
PORT_SetError(SEC_ERROR_OCSP_UNAUTHORIZED_REQUEST);
break;
case ocspResponse_other:
case ocspResponse_unused:
default:
PORT_SetError(SEC_ERROR_OCSP_UNKNOWN_RESPONSE_STATUS);
break;
}
return SECFailure;
}