RetroZilla/security/nss/tests/tools/tools.sh

526 lines
19 KiB
Bash
Raw Normal View History

2015-10-21 05:03:22 +02:00
#! /bin/bash
#
# ***** BEGIN LICENSE BLOCK *****
# Version: MPL 1.1/GPL 2.0/LGPL 2.1
#
# The contents of this file are subject to the Mozilla Public License Version
# 1.1 (the "License"); you may not use this file except in compliance with
# the License. You may obtain a copy of the License at
# http://www.mozilla.org/MPL/
#
# Software distributed under the License is distributed on an "AS IS" basis,
# WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
# for the specific language governing rights and limitations under the
# License.
#
# The Original Code is the Netscape security libraries.
#
# The Initial Developer of the Original Code is
# Netscape Communications Corporation.
# Portions created by the Initial Developer are Copyright (C) 1994-2000
# the Initial Developer. All Rights Reserved.
#
# Contributor(s):
# Dr Vipul Gupta <vipul.gupta@sun.com>, Sun Microsystems Laboratories
#
# Alternatively, the contents of this file may be used under the terms of
# either the GNU General Public License Version 2 or later (the "GPL"), or
# the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
# in which case the provisions of the GPL or the LGPL are applicable instead
# of those above. If you wish to allow use of your version of this file only
# under the terms of either the GPL or the LGPL, and not to allow others to
# use your version of this file under the terms of the MPL, indicate your
# decision by deleting the provisions above and replace them with the notice
# and other provisions required by the GPL or the LGPL. If you do not delete
# the provisions above, a recipient may use your version of this file under
# the terms of any one of the MPL, the GPL or the LGPL.
#
# ***** END LICENSE BLOCK *****
########################################################################
#
# mozilla/security/nss/tests/tools/tools.sh
#
# Script to test basic functionality of NSS tools
#
# needs to work on all Unix and Windows platforms
#
# tests implemented:
# pk12util
# signtool
#
# special strings
# ---------------
# FIXME ... known problems, search for this string
# NOTE .... unexpected behavior
########################################################################
export pkcs12v2pbeWithSha1And128BitRc4=\
"PKCS #12 V2 PBE With SHA-1 and 128 Bit RC4"
export pkcs12v2pbeWithSha1And40BitRc4=\
"PKCS #12 V2 PBE With SHA-1 and 40 Bit RC4"
export pkcs12v2pbeWithSha1AndTripleDESCBC=\
"PKCS #12 V2 PBE With SHA-1 and Triple DES-CBC"
export pkcs12v2pbeWithSha1And128BitRc2Cbc=\
"PKCS #12 V2 PBE With SHA-1 and 128 Bit RC2 CBC"
export pkcs12v2pbeWithSha1And40BitRc2Cbc=\
"PKCS #12 V2 PBE With SHA-1 and 40 Bit RC2 CBC"
export pkcs12v2pbeWithMd2AndDESCBC=\
"PKCS #5 Password Based Encryption with MD2 and DES-CBC"
export pkcs12v2pbeWithMd5AndDESCBC=\
"PKCS #5 Password Based Encryption with MD5 and DES-CBC"
export pkcs12v2pbeWithSha1AndDESCBC=\
"PKCS #5 Password Based Encryption with SHA-1 and DES-CBC"
export pkcs5pbeWithMD2AndDEScbc=\
"PKCS #5 Password Based Encryption with MD2 and DES-CBC"
export pkcs5pbeWithMD5AndDEScbc=\
"PKCS #5 Password Based Encryption with MD5 and DES-CBC"
export pkcs5pbeWithSha1AndDEScbc=\
"PKCS #5 Password Based Encryption with SHA-1 and DES-CBC"
############################## tools_init ##############################
# local shell function to initialize this script
########################################################################
tools_init()
{
SCRIPTNAME=tools.sh # sourced - $0 would point to all.sh
if [ -z "${CLEANUP}" ] ; then # if nobody else is responsible for
CLEANUP="${SCRIPTNAME}" # cleaning this script will do it
fi
if [ -z "${INIT_SOURCED}" -o "${INIT_SOURCED}" != "TRUE" ]; then
cd ../common
. ./init.sh
fi
if [ ! -r $CERT_LOG_FILE ]; then # we need certificates here
cd ../cert
. ./cert.sh
fi
SCRIPTNAME=tools.sh
if [ -n "$NSS_ENABLE_ECC" ] ; then
html_head "Tools Tests with ECC"
else
html_head "Tools Tests"
fi
grep "SUCCESS: SMIME passed" $CERT_LOG_FILE >/dev/null || {
Exit 15 "Fatal - S/MIME of cert.sh needs to pass first"
}
TOOLSDIR=${HOSTDIR}/tools
COPYDIR=${TOOLSDIR}/copydir
R_TOOLSDIR=../tools
R_COPYDIR=../tools/copydir
P_R_COPYDIR=${R_COPYDIR}
if [ -n "${MULTIACCESS_DBM}" ]; then
P_R_COPYDIR="multiaccess:Tools.$version"
fi
mkdir -p ${TOOLSDIR}
mkdir -p ${COPYDIR}
mkdir -p ${TOOLSDIR}/html
cp ${QADIR}/tools/sign*.html ${TOOLSDIR}/html
cd ${TOOLSDIR}
}
########################## list_p12_file ###############################
# List the key and cert in the specified p12 file
########################################################################
list_p12_file()
{
echo "$SCRIPTNAME: Listing Alice's pk12 file"
echo "pk12util -l ${1} -w ${R_PWFILE}"
${BINDIR}/pk12util -l ${1} -w ${R_PWFILE} 2>&1
ret=$?
html_msg $ret 0 "Listing ${1} (pk12util -l)"
check_tmpfile
}
########################################################################
# Import the key and cert from the specified p12 file
########################################################################
import_p12_file()
{
echo "$SCRIPTNAME: Importing Alice's pk12 ${1} file"
echo "pk12util -i ${1} -d ${P_R_COPYDIR} -k ${R_PWFILE} -w ${R_PWFILE}"
${BINDIR}/pk12util -i ${1} -d ${P_R_COPYDIR} -k ${R_PWFILE} -w ${R_PWFILE} 2>&1
ret=$?
html_msg $ret 0 "Importing ${1} (pk12util -i)"
check_tmpfile
}
########################################################################
# Export the key and cert to a p12 file using default ciphers
########################################################################
export_with_default_ciphers()
{
echo "$SCRIPTNAME: Exporting Alice's key & cert with [default:default] (pk12util -o)"
echo "pk12util -o Alice.p12 -n \"Alice\" -d ${P_R_ALICEDIR} \\"
echo " -k ${R_PWFILE} -w ${R_PWFILE}"
${BINDIR}/pk12util -o Alice.p12 -n "Alice" -d ${P_R_ALICEDIR} \
-k ${R_PWFILE} -w ${R_PWFILE} 2>&1
ret=$?
html_msg $ret 0 "Exporting Alices's key & cert with [default:default] (pk12util -o)"
check_tmpfile
return $ret
}
########################################################################
# Exports key/cert to a p12 file, the key encryption cipher is specified
# and the cert encryption cipher is blank for default.
########################################################################
export_with_key_cipher()
{
# $1 key encryption cipher
echo "$SCRIPTNAME: Exporting with [${1}:default]"
echo "pk12util -o Alice.p12 -n \"Alice\" -d ${P_R_ALICEDIR} \\"
echo " -k ${R_PWFILE} -w ${R_PWFILE} -c ${1}"
${BINDIR}/pk12util -o Alice.p12 -n "Alice" -d ${P_R_ALICEDIR} \
-k ${R_PWFILE} -w ${R_PWFILE} -c "${1}" 2>&1
ret=$?
html_msg $ret 0 "Exporting with [${1}:default] (pk12util -o)"
check_tmpfile
return $ret
}
########################################################################
# Exports key/cert to a p12 file, the key encryption cipher is left
# empty for default and the cert encryption cipher is specified.
########################################################################
export_with_cert_cipher()
{
# $1 certificate encryption cipher
echo "$SCRIPTNAME: Exporting with [default:${1}]"
echo "pk12util -o Alice.p12 -n \"Alice\" -d ${P_R_ALICEDIR} \\"
echo " -k ${R_PWFILE} -w ${R_PWFILE} -C ${1}"
${BINDIR}/pk12util -o Alice.p12 -n "Alice" -d ${P_R_ALICEDIR} \
-k ${R_PWFILE} -w ${R_PWFILE} -C "${1}" 2>&1
ret=$?
html_msg $ret 0 "Exporting with [default:${1}] (pk12util -o)"
check_tmpfile
return $ret
}
########################################################################
# Exports key/cert to a p12 file, both the key encryption cipher and
# the cert encryption cipher are specified.
########################################################################
export_with_both_key_and_cert_cipher()
{
# $1 key encryption cipher or ""
# $2 certificate encryption cipher or ""
echo "pk12util -o Alice.p12 -n \"Alice\" -d ${P_R_ALICEDIR} \\"
echo " -k ${R_PWFILE} -w ${R_PWFILE} -c ${1} -C ${2}"
${BINDIR}/pk12util -o Alice.p12 -n Alice -d ${P_R_ALICEDIR} \
-k ${R_PWFILE} -w ${R_PWFILE} \
-c "${1}" -C "${2}" 2>&1
ret=$?
html_msg $ret 0 "Exporting with [${1}:${2}] (pk12util -o)"
check_tmpfile
return $ret
}
########################################################################
# Exports key and cert to a p12 file, both the key encryption cipher
# and the cert encryption cipher are specified. The key and cert are
# imported and the p12 file is listed
########################################################################
export_list_import()
{
# $1 key encryption cipher
# $2 certificate encryption cipher
if [ "${1}" != "DEFAULT" -a "${2}" != "DEFAULT" ]; then
export_with_both_key_and_cert_cipher "${1}" "${2}"
elif [ "${1}" != "DEFAULT" -a "${2}" = "DEFAULT" ]; then
export_with_key_cipher "${1}"
elif [ "${1}" = "DEFAULT" -a "${2}" != "DEFAULT" ]; then
export_with_cert_cipher "${2}"
else
export_with_default_ciphers
fi
list_p12_file Alice.p12
import_p12_file Alice.p12
}
########################################################################
# Export using the pkcs5pbe ciphers for key and certificate encryption.
# List the contents of and import from the p12 file.
########################################################################
tools_p12_export_list_import_all_pkcs5pbe_ciphers()
{
# specify each on key and cert cipher
for key_cipher in "${pkcs5pbeWithMD2AndDEScbc}" \
"${pkcs5pbeWithMD5AndDEScbc}" \
"${pkcs5pbeWithSha1AndDEScbc}"\
"DEFAULT"; do
for cert_cipher in "${pkcs5pbeWithMD2AndDEScbc}" \
"${pkcs5pbeWithMD5AndDEScbc}" \
"${pkcs5pbeWithSha1AndDEScbc}" \
"DEFAULT"\
"null"; do
export_list_import "${key_cipher}" "${cert_cipher}"
done
done
}
########################################################################
# Export using the pkcs5v2 ciphers for key and certificate encryption.
# List the contents of and import from the p12 file.
########################################################################
tools_p12_export_list_import_all_pkcs5v2_ciphers()
{
# These should pass
for key_cipher in\
RC2-CBC \
DES-EDE3-CBC \
AES-128-CBC \
AES-192-CBC \
AES-256-CBC \
CAMELLIA-128-CBC \
CAMELLIA-192-CBC \
CAMELLIA-256-CBC; do
#---------------------------------------------------------------
# Bug 452464 - pk12util -o fails when -C option specifies AES or
# Camellia ciphers
# FIXME Restore these to the list
# AES-128-CBC, \
# AES-192-CBC, \
# AES-256-CBC, \
# CAMELLIA-128-CBC, \
# CAMELLIA-192-CBC, \
# CAMELLIA-256-CBC, \
# when 452464 is fixed
#---------------------------------------------------------------
for cert_cipher in \
RC2-CBC \
DES-EDE3-CBC \
null; do
export_list_import ${key_cipher} ${cert_cipher}
done
done
}
########################################################################
# Export using the pkcs12v2pbe ciphers for key and certificate encryption.
# List the contents of and import from the p12 file.
########################################################################
tools_p12_export_list_import_all_pkcs12v2pbe_ciphers()
{
#---------------------------------------------------------------
# Bug 452471 - pk12util -o fails when -c option specifies pkcs12v2 PBE ciphers
# FIXME - Restore these to the list
# "${pkcs12v2pbeWithSha1And128BitRc4}" \
# "${pkcs12v2pbeWithSha1And40BitRc4}" \
# "${pkcs12v2pbeWithSha1AndTripleDESCBC}" \
# "${pkcs12v2pbeWithSha1And128BitRc2Cbc}" \
# "${pkcs12v2pbeWithSha1And40BitRc2Cbc}" \
# "${pkcs12v2pbeWithMd2AndDESCBC}" \
# "${pkcs12v2pbeWithMd5AndDESCBC}" \
# "${pkcs12v2pbeWithSha1AndDESCBC}" \
# "DEFAULT"; do
# when 452471 is fixed
#---------------------------------------------------------------
# for key_cipher in \
key_cipher="DEFAULT"
for cert_cipher in "${pkcs12v2pbeWithSha1And128BitRc4}" \
"${pkcs12v2pbeWithSha1And40BitRc4}" \
"${pkcs12v2pbeWithSha1AndTripleDESCBC}" \
"${pkcs12v2pbeWithSha1And128BitRc2Cbc}" \
"${pkcs12v2pbeWithSha1And40BitRc2Cbc}" \
"${pkcs12v2pbeWithMd2AndDESCBC}" \
"${pkcs12v2pbeWithMd5AndDESCBC}" \
"${pkcs12v2pbeWithSha1AndDESCBC}" \
"DEFAULT"\
"null"; do
export_list_import "${key_cipher}" "${key_cipher}"
done
#done
}
#########################################################################
# Export with no encryption on key should fail but on cert should pass
#########################################################################
tools_p12_export_with_null_ciphers()
{
# use null as the key encryption algorithm default for the cert one
# should fail
echo "pk12util -o Alice.p12 -n \"Alice\" -d ${P_R_ALICEDIR} \\"
echo " -k ${R_PWFILE} -w ${R_PWFILE} -c null"
${BINDIR}/pk12util -o Alice.p12 -n Alice -d ${P_R_ALICEDIR} \
-k ${R_PWFILE} -w ${R_PWFILE} \
-c null 2>&1
ret=$?
html_msg $ret 30 "Exporting with [null:default] (pk12util -o)"
check_tmpfile
# use default as the key encryption algorithm null for the cert one
# should pass
echo "pk12util -o Alice.p12 -n \"Alice\" -d ${P_R_ALICEDIR} \\"
echo " -k ${R_PWFILE} -w ${R_PWFILE} -C null"
${BINDIR}/pk12util -o Alice.p12 -n Alice -d ${P_R_ALICEDIR} \
-k ${R_PWFILE} -w ${R_PWFILE} \
-C null 2>&1
ret=$?
html_msg $ret 0 "Exporting with [default:null] (pk12util -o)"
check_tmpfile
}
#########################################################################
# Exports using the default key and certificate encryption ciphers.
# Imports from and lists the contents of the p12 file.
# Repeats the test with ECC if enabled.
########################################################################
tools_p12_export_list_import_with_default_ciphers()
{
echo "$SCRIPTNAME: Exporting Alice's email cert & key - default ciphers"
export_list_import "DEFAULT" "DEFAULT"
if [ -n "$NSS_ENABLE_ECC" ] ; then
echo "$SCRIPTNAME: Exporting Alice's email EC cert & key---------------"
echo "pk12util -o Alice-ec.p12 -n \"Alice-ec\" -d ${P_R_ALICEDIR} -k ${R_PWFILE} \\"
echo " -w ${R_PWFILE}"
${BINDIR}/pk12util -o Alice-ec.p12 -n "Alice-ec" -d ${P_R_ALICEDIR} -k ${R_PWFILE} \
-w ${R_PWFILE} 2>&1
ret=$?
html_msg $ret 0 "Exporting Alice's email EC cert & key (pk12util -o)"
check_tmpfile
echo "$SCRIPTNAME: Importing Alice's email EC cert & key --------------"
echo "pk12util -i Alice-ec.p12 -d ${P_R_COPYDIR} -k ${R_PWFILE} -w ${R_PWFILE}"
${BINDIR}/pk12util -i Alice-ec.p12 -d ${P_R_COPYDIR} -k ${R_PWFILE} -w ${R_PWFILE} 2>&1
ret=$?
html_msg $ret 0 "Importing Alice's email EC cert & key (pk12util -i)"
check_tmpfile
echo "$SCRIPTNAME: Listing Alice's pk12 EC file -----------------"
echo "pk12util -l Alice-ec.p12 -w ${R_PWFILE}"
${BINDIR}/pk12util -l Alice-ec.p12 -w ${R_PWFILE} 2>&1
ret=$?
html_msg $ret 0 "Listing Alice's pk12 EC file (pk12util -l)"
check_tmpfile
fi
}
############################## tools_p12 ###############################
# local shell function to test basic functionality of pk12util
########################################################################
tools_p12()
{
tools_p12_export_list_import_with_default_ciphers
tools_p12_export_list_import_all_pkcs5v2_ciphers
tools_p12_export_list_import_all_pkcs5pbe_ciphers
tools_p12_export_list_import_all_pkcs12v2pbe_ciphers
tools_p12_export_with_null_ciphers
}
############################## tools_sign ##############################
# local shell function pk12util uses a hardcoded tmp file, if this exists
# and is owned by another user we don't get reasonable errormessages
########################################################################
check_tmpfile()
{
if [ $ret != "0" -a -f /tmp/Pk12uTemp ] ; then
echo "Error: pk12util temp file exists. Please remove this file and"
echo " rerun the test (/tmp/Pk12uTemp) "
fi
}
############################## tools_sign ##############################
# local shell function to test basic functionality of signtool
########################################################################
tools_sign()
{
echo "$SCRIPTNAME: Create objsign cert -------------------------------"
echo "signtool -G \"objectsigner\" -d ${P_R_ALICEDIR} -p \"nss\""
${BINDIR}/signtool -G "objsigner" -d ${P_R_ALICEDIR} -p "nss" 2>&1 <<SIGNSCRIPT
y
TEST
MOZ
NSS
NY
US
liz
liz@moz.org
SIGNSCRIPT
html_msg $? 0 "Create objsign cert (signtool -G)"
echo "$SCRIPTNAME: Signing a jar of files ----------------------------"
echo "signtool -Z nojs.jar -d ${P_R_ALICEDIR} -p \"nss\" -k objsigner \\"
echo " ${R_TOOLSDIR}/html"
${BINDIR}/signtool -Z nojs.jar -d ${P_R_ALICEDIR} -p "nss" -k objsigner \
${R_TOOLSDIR}/html
html_msg $? 0 "Signing a jar of files (signtool -Z)"
echo "$SCRIPTNAME: Listing signed files in jar ----------------------"
echo "signtool -v nojs.jar -d ${P_R_ALICEDIR} -p nss -k objsigner"
${BINDIR}/signtool -v nojs.jar -d ${P_R_ALICEDIR} -p nss -k objsigner
html_msg $? 0 "Listing signed files in jar (signtool -v)"
echo "$SCRIPTNAME: Show who signed jar ------------------------------"
echo "signtool -w nojs.jar -d ${P_R_ALICEDIR}"
${BINDIR}/signtool -w nojs.jar -d ${P_R_ALICEDIR}
html_msg $? 0 "Show who signed jar (signtool -w)"
echo "$SCRIPTNAME: Signing a xpi of files ----------------------------"
echo "signtool -Z nojs.xpi -X -d ${P_R_ALICEDIR} -p \"nss\" -k objsigner \\"
echo " ${R_TOOLSDIR}/html"
${BINDIR}/signtool -Z nojs.xpi -X -d ${P_R_ALICEDIR} -p "nss" -k objsigner \
${R_TOOLSDIR}/html
html_msg $? 0 "Signing a xpi of files (signtool -Z -X)"
echo "$SCRIPTNAME: Listing signed files in xpi ----------------------"
echo "signtool -v nojs.xpi -d ${P_R_ALICEDIR} -p nss -k objsigner"
${BINDIR}/signtool -v nojs.xpi -d ${P_R_ALICEDIR} -p nss -k objsigner
html_msg $? 0 "Listing signed files in xpi (signtool -v)"
echo "$SCRIPTNAME: Show who signed xpi ------------------------------"
echo "signtool -w nojs.xpi -d ${P_R_ALICEDIR}"
${BINDIR}/signtool -w nojs.xpi -d ${P_R_ALICEDIR}
html_msg $? 0 "Show who signed xpi (signtool -w)"
}
############################## tools_cleanup ###########################
# local shell function to finish this script (no exit since it might be
# sourced)
########################################################################
tools_cleanup()
{
html "</TABLE><BR>"
cd ${QADIR}
. common/cleanup.sh
}
################## main #################################################
tools_init
tools_p12
tools_sign
tools_cleanup