RetroZilla/xpinstall/wizard/windows/builder/build_static.pl

316 lines
8.5 KiB
Perl
Raw Normal View History

2015-10-21 05:03:22 +02:00
#!c:\perl\bin\perl
#
# ***** BEGIN LICENSE BLOCK *****
# Version: MPL 1.1/GPL 2.0/LGPL 2.1
#
# The contents of this file are subject to the Mozilla Public License Version
# 1.1 (the "License"); you may not use this file except in compliance with
# the License. You may obtain a copy of the License at
# http://www.mozilla.org/MPL/
#
# Software distributed under the License is distributed on an "AS IS" basis,
# WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
# for the specific language governing rights and limitations under the
# License.
#
# The Original Code is mozilla.org code.
#
# The Initial Developer of the Original Code is
# Netscape Communications Corporation.
# Portions created by the Initial Developer are Copyright (C) 1999
# the Initial Developer. All Rights Reserved.
#
# Contributor(s):
# Sean Su
#
# Alternatively, the contents of this file may be used under the terms of
# either of the GNU General Public License Version 2 or later (the "GPL"),
# or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
# in which case the provisions of the GPL or the LGPL are applicable instead
# of those above. If you wish to allow use of your version of this file only
# under the terms of either the GPL or the LGPL, and not to allow others to
# use your version of this file under the terms of the MPL, indicate your
# decision by deleting the provisions above and replace them with the notice
# and other provisions required by the GPL or the LGPL. If you do not delete
# the provisions above, a recipient may use your version of this file under
# the terms of any one of the MPL, the GPL or the LGPL.
#
# ***** END LICENSE BLOCK *****
#
# Purpose:
# To build the mozilla self-extracting installer and its corresponding .xpi files
# given a mozilla build on a local system.
#
# Requirements:
# 1. perl needs to be installed correctly on the build system because cwd.pm is used.
# 2. mozilla\xpinstall\wizard\windows needs to be built.
# a. to build it, MFC must be installed with VC
# b. set MOZ_MFC=1 in the build environment
# c. run nmake -f makefile.win from the above directory
#
if($ENV{MOZ_SRC} eq "")
{
print "Error: MOZ_SRC not set!";
exit(1);
}
$inXpiURL = "";
$inRedirIniURL = "";
ParseArgv(@ARGV);
if($inXpiURL eq "")
{
# archive url not supplied, set it to default values
$inXpiURL = "ftp://not.supplied.invalid";
}
if($inRedirIniURL eq "")
{
# redirect url not supplied, set it to default value.
$inRedirIniURL = $inXpiURL;
}
$DEPTH = "$ENV{MOZ_SRC}\\mozilla";
$cwdBuilder = "$DEPTH\\xpinstall\\wizard\\windows\\builder";
$cwdBuilder =~ s/\//\\/g; # convert slashes to backslashes for Dos commands to work
$cwdDist = GetCwd("dist", $DEPTH, $cwdBuilder);
$cwdDistWin = GetCwd("distwin", $DEPTH, $cwdBuilder);
$cwdInstall = GetCwd("install", $DEPTH, $cwdBuilder);
$cwdPackager = GetCwd("packager", $DEPTH, $cwdBuilder);
$verPartial = "5.0.0.";
$ver = $verPartial . GetVersion($DEPTH);
if(-d "$DEPTH\\stage")
{
system("perl $cwdPackager\\windows\\rdir.pl $DEPTH\\stage");
}
# The destination cannot be a sub directory of the source
# pkgcp.pl will get very unhappy
mkdir("$DEPTH\\stage", 0775);
system("perl $cwdPackager\\pkgcp.pl -s $cwdDistWin -d $DEPTH\\stage -f $cwdPackager\\packages-static-win -o dos -v");
chdir("$cwdPackager\\windows");
if(system("perl makeall.pl $ver $DEPTH\\stage $cwdDistWin\\install -aurl $inXpiURL -rurl $inRedirIniURL"))
{
print "\n Error: perl makeall.pl $ver $DEPTH\\stage $cwdDistWin\\install $inXpiURL $inRedirIniURL\n";
exit(1);
}
chdir($cwdBuilder);
# Copy the .xpi files to the same directory as setup.exe.
# This is so that setup.exe can find the .xpi files
# in the same directory and use them.
#
# Mozilla-win32-install.exe (a self extracting file) will use the .xpi
# files from its current directory as well, but it is not a requirement
# that they exist because it already contains the .xpi files within itself.
if(system("copy $cwdDistWin\\install\\xpi\\*.* $cwdDistWin\\install"))
{
print "Error: copy $cwdDistWin\\install\\xpi\\*.* $cwdDistWin\\install\n";
exit(1);
}
print "\n";
print "**\n";
print "*\n";
print "* A self-extracting installer has been built and delivered:\n";
print "*\n";
print "* $cwdDistWin\\install\\mozilla-win32-install.exe\n";
print "*\n";
print "**\n";
print "\n";
exit(0);
sub PrintUsage
{
die "usage: $0 [options]
options available are:
-h - this usage.
-aurl - ftp or http url for where the archives (.xpi, exe, .zip, etx...) are.
ie: ftp://my.ftp.com/mysoftware/version1.0/xpi
-rurl - ftp or http url for where the redirect.ini file is located at.
ie: ftp://my.ftp.com/mysoftware/version1.0
This url can be the same as the archive url.
If -rurl is not supplied, it will be assumed that the redirect.ini
file is at -arul.
\n";
}
sub ParseArgv
{
my(@myArgv) = @_;
my($counter);
for($counter = 0; $counter <= $#myArgv; $counter++)
{
if($myArgv[$counter] =~ /^[-,\/]h$/i)
{
PrintUsage();
}
elsif($myArgv[$counter] =~ /^[-,\/]aurl$/i)
{
if($#myArgv >= ($counter + 1))
{
++$counter;
$inXpiURL = $myArgv[$counter];
$inRedirIniURL = $inXpiURL;
}
}
elsif($myArgv[$counter] =~ /^[-,\/]rurl$/i)
{
if($#myArgv >= ($counter + 1))
{
++$counter;
$inRedirIniURL = $myArgv[$counter];
}
}
}
}
sub GetCwd
{
my($whichPath, $depthPath, $returnCwd) = @_;
my($distCwd);
my($distWinPathName);
my($distPath);
# determine if build was built via gmake
if(-e "$depthPath\\dist\\install")
{
$distWinPathName = "dist";
}
else
{
# determine if build is debug or optimized
# (used only for nmake builds)
if($ENV{MOZ_DEBUG} eq "")
{
$distWinPathName = "dist\\Win32_o.obj";
}
else
{
$distWinPathName = "dist\\Win32_d.obj";
}
}
if($whichPath eq "dist")
{
# verify the existance of path
if(!(-e "$depthPath\\dist"))
{
print "path not found: $depthPath\\dist\n";
exit(1);
}
$distPath = "$depthPath\\dist";
}
elsif($whichPath eq "distwin")
{
# verify the existance of path
if(!(-e "$depthPath\\$distWinPathName"))
{
print "path not found: $depthPath\\$distWinPathName\n";
exit(1);
}
$distPath = "$depthPath\\$distWinPathName";
}
elsif($whichPath eq "install")
{
# verify the existance of path
if(!(-e "$depthPath\\$distWinPathName\\install"))
{
print "path not found: $depthPath\\$distWinPathName\\install\n";
exit(1);
}
$distPath = "$depthPath\\$distWinPathName\\install";
}
elsif($whichPath eq "packager")
{
# verify the existance of path
if(!(-e "$depthPath\\xpinstall\\packager"))
{
print "path not found: $depthPath\\xpinstall\\packager\n";
exit(1);
}
$distPath = "$depthPath\\xpinstall\\packager";
}
$distPath =~ s/\//\\/g; # convert slashes to backslashes for Dos commands to work
return($distPath);
}
sub GetVersion
{
my($depthPath) = @_;
my($fileMozilla);
my($fileMozillaVer);
my($distWinPathName);
my($monAdjusted);
my($yy);
my($mm);
my($dd);
my($hh);
# determine if build was built via gmake
if(-e "$depthPath\\dist\\install")
{
$distWinPathName = "dist";
}
else
{
# determine if build is debug or optimized
# (used only for nmake builds)
if($ENV{MOZ_DEBUG} eq "")
{
$distWinPathName = "dist\\Win32_o.obj";
}
else
{
$distWinPathName = "dist\\Win32_d.obj";
}
}
$fileMozilla = "$depthPath\\$distWinPathName\\bin\\mozilla.exe";
# verify the existance of file
if(!(-e "$fileMozilla"))
{
print "file not found: $fileMozilla\n";
exit(1);
}
($dev, $ino, $mode, $nlink, $uid, $gid, $rdev, $size, $atime, $mtime, $ctime, $blksize, $blocks) = stat $fileMozilla;
($sec, $min, $hour, $mday, $mon, $year, $wday, $yday, $isdst) = localtime($mtime);
# calculate year
# localtime() returns year 2000 as 100, we mod 100 to get at the last 2 digits
$yy = $year % 100;
$yy = "20" . sprintf("%.2d", $yy);
# calculate month
$monAdjusted = $mon + 1;
$mm = sprintf("%.2d", $monAdjusted);
# calculate month day
$dd = sprintf("%.2d", $mday);
# calculate day hour
$hh = sprintf("%.2d", $hour);
$fileMozillaVer = "$yy$mm$dd$hh";
print "y2k compliant version string for $fileMozilla: $fileMozillaVer\n";
return($fileMozillaVer);
}