/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */ /* ***** BEGIN LICENSE BLOCK ***** * Version: MPL 1.1/GPL 2.0/LGPL 2.1 * * The contents of this file are subject to the Mozilla Public License Version * 1.1 (the "License"); you may not use this file except in compliance with * the License. You may obtain a copy of the License at * http://www.mozilla.org/MPL/ * * Software distributed under the License is distributed on an "AS IS" basis, * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License * for the specific language governing rights and limitations under the * License. * * The Original Code is mozilla.org code. * * The Initial Developer of the Original Code is * Netscape Communications Corporation. * Portions created by the Initial Developer are Copyright (C) 1998 * the Initial Developer. All Rights Reserved. * * Contributor(s): * * Alternatively, the contents of this file may be used under the terms of * either of the GNU General Public License Version 2 or later (the "GPL"), * or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), * in which case the provisions of the GPL or the LGPL are applicable instead * of those above. If you wish to allow use of your version of this file only * under the terms of either the GPL or the LGPL, and not to allow others to * use your version of this file under the terms of the MPL, indicate your * decision by deleting the provisions above and replace them with the notice * and other provisions required by the GPL or the LGPL. If you do not delete * the provisions above, a recipient may use your version of this file under * the terms of any one of the MPL, the GPL or the LGPL. * * ***** END LICENSE BLOCK ***** */ #ifdef MOZ_LOGGING #define FORCE_PR_LOG /* Allow logging in the release build */ #endif #include "nsIGenericFactory.h" #include "nsRegistry.h" #include "nsIEnumerator.h" #include "nsDirectoryService.h" #include "nsDirectoryServiceDefs.h" #include "nsAppDirectoryServiceDefs.h" #include "NSReg.h" #include "prmem.h" #include "prlock.h" #include "prlog.h" #include "prprf.h" #include "nsCRT.h" #include "nsMemory.h" #include "nsCOMPtr.h" #include "nsILocalFile.h" #include "nsIServiceManager.h" #include "nsTextFormatter.h" #ifdef XP_BEOS #include #include #endif /* extra locking for the paranoid */ /* #define EXTRA_THREADSAFE */ #ifndef EXTRA_THREADSAFE #define PR_Lock(x) (void)0 #define PR_Unlock(x) (void)0 #endif // Logging of debug output extern NS_COM PRLogModuleInfo *nsComponentManagerLog; PRUnichar widestrFormat[] = { PRUnichar('%'),PRUnichar('s'),PRUnichar(0)}; /*-------------------------------- nsRegistry ---------------------------------- | This class implements the nsIRegistry interface using the functions | | provided by libreg (as declared in mozilla/modules/libreg/include/NSReg.h). | | | | Since that interface is designed to match the libreg function, this class | | is implemented with each member function being a simple wrapper for the | | corresponding libreg function. | | | | #define EXTRA_THREADSAFE if you are worried about libreg thread safety. | | It should not be necessary, but I'll leave in the code for the paranoid. | ------------------------------------------------------------------------------*/ #define NS_MOZILLA_DIR_PERMISSION 00700 #include "nsRegistry.h" /* struct nsRegistry : public nsIRegistry { // This class implements the nsISupports interface functions. NS_DECL_ISUPPORTS // This class implements the nsIRegistry interface functions. NS_DECL_NSIREGISTRY // ctor/dtor nsRegistry(); private: ~nsRegistry(); protected: HREG mReg; // Registry handle. #ifdef EXTRA_THREADSAFE PRLock *mregLock; // libreg isn't threadsafe. Use locks to synchronize. #endif char *mCurRegFile; // these are to prevent open from opening the registry again nsWellKnownRegistry mCurRegID; NS_IMETHOD Close(); }; // nsRegistry */ #include "nsIFactory.h" /*----------------------------- nsRegistryFactory ------------------------------ | Class factory for nsRegistry objects. | ------------------------------------------------------------------------------*/ struct nsRegistryFactory : public nsIFactory { // This class implements the nsISupports interface functions. NS_DECL_ISUPPORTS // nsIFactory methods NS_IMETHOD CreateInstance(nsISupports *,const nsIID &,void **); NS_IMETHOD LockFactory(PRBool aLock); // ctor nsRegistryFactory(); }; /*--------------------------- nsRegSubtreeEnumerator --------------------------- | This class implements the nsIEnumerator interface and is used to implement | | the nsRegistry EnumerateSubtrees and EnumerateAllSubtrees functions. | ------------------------------------------------------------------------------*/ struct nsRegSubtreeEnumerator : public nsIRegistryEnumerator { // This class implements the nsISupports interface functions. NS_DECL_ISUPPORTS // This class implements the nsIEnumerator interface functions. NS_DECL_NSIENUMERATOR // And our magic behind-the-back fast-path thing. NS_DECL_NSIREGISTRYENUMERATOR // ctor/dtor nsRegSubtreeEnumerator( HREG hReg, RKEY rKey, PRBool all ); // virtual dtor since subclasses call our Release() virtual ~nsRegSubtreeEnumerator(); protected: NS_IMETHOD advance(); // Implementation file; does appropriate NR_RegEnum call. HREG mReg; // Handle to registry we're affiliated with. RKEY mKey; // Base key being enumerated. char mName[MAXREGPATHLEN]; // The name of the current key which is in mNext REGENUM mEnum; // Corresponding libreg "enumerator". REGENUM mNext; // Lookahead value. PRUint32 mStyle; // Style (indicates all or some); PRBool mDone; // Done flag. #ifdef EXTRA_THREADSAFE PRLock *mregLock; #endif }; // nsRegSubtreeEnumerator /*--------------------------- nsRegValueEnumerator ----------------------------- | This class is a variation on nsRegSubtreeEnumerator that allocates | | nsRegistryValue objects rather than nsRegistryNode objects. It also | | overrides certain functions to make sure the "value" oriented libreg | | functions used rather than the subtree oriented ones. | ------------------------------------------------------------------------------*/ struct nsRegValueEnumerator : public nsRegSubtreeEnumerator { // Override CurrentItem to allocate nsRegistryValue objects. NS_IMETHOD CurrentItem( nsISupports **result ); // Override advance() to use proper NR_RegEnumEntries. NS_IMETHOD advance(); // ctor/dtor nsRegValueEnumerator( HREG hReg, RKEY rKey ); }; // nsRegValueEnumerator /*------------------------------ nsRegistryNode -------------------------------- | This class implements the nsIRegistryNode interface. Instances are | | allocated by nsRegSubtreeEnumerator::CurrentItem. | ------------------------------------------------------------------------------*/ struct nsRegistryNode : public nsIRegistryNode { // This class implements the nsISupports interface functions. NS_DECL_ISUPPORTS // This class implements the nsIRegistryNode interface functions. NS_DECL_NSIREGISTRYNODE // ctor nsRegistryNode( HREG hReg, char *name, RKEY childKey ); private: ~nsRegistryNode(); protected: HREG mReg; // Handle to registry this node is part of. char mName[MAXREGPATHLEN]; // Buffer to hold name. RKEY mChildKey; // Key corresponding to mName #ifdef EXTRA_THREADSAFE PRLock *mregLock; #endif }; // nsRegistryNode /*------------------------------ nsRegistryValue ------------------------------- | This class implements the nsIRegistryValue interface. Instances are | | allocated by nsRegValueEnumerator::CurrentItem. | ------------------------------------------------------------------------------*/ struct nsRegistryValue : public nsIRegistryValue { // This class implements the nsISupports interface functions. NS_DECL_ISUPPORTS // This class implements the nsIRegistryValue interface functions. NS_DECL_NSIREGISTRYVALUE // ctor nsRegistryValue( HREG hReg, RKEY key, REGENUM slot ); private: ~nsRegistryValue(); protected: nsresult getInfo(); // Get registry info. HREG mReg; // Handle to registry this node is part of. RKEY mKey; // Key this node is under. REGENUM mEnum; // Copy of corresponding content of parent enumerator. REGINFO mInfo; // Value info. char mName[MAXREGNAMELEN]; // Buffer to hold name. REGERR mErr; // XXX This causes this class to be NON THREAD SAFE #ifdef EXTRA_THREADSAFE PRLock *mregLock; #endif }; // nsRegistryValue /*----------------------------- regerr2nsresult -------------------------------- | This utility function maps a REGERR value to a corresponding nsresult | | error code. | ------------------------------------------------------------------------------*/ static nsresult regerr2nsresult( REGERR err ) { nsresult rv = NS_ERROR_UNEXPECTED; switch( err ) { case REGERR_OK: rv = NS_OK; break; case REGERR_FAIL: rv = NS_ERROR_FAILURE; break; case REGERR_NOMORE: rv = NS_ERROR_REG_NO_MORE; break; case REGERR_NOFIND: rv = NS_ERROR_REG_NOT_FOUND; break; case REGERR_PARAM: case REGERR_BADTYPE: case REGERR_BADNAME: rv = NS_ERROR_INVALID_ARG; break; case REGERR_NOFILE: rv = NS_ERROR_REG_NOFILE; break; case REGERR_MEMORY: rv = NS_ERROR_OUT_OF_MEMORY; break; case REGERR_BUFTOOSMALL: rv = NS_ERROR_REG_BUFFER_TOO_SMALL; break; case REGERR_NAMETOOLONG: rv = NS_ERROR_REG_NAME_TOO_LONG; break; case REGERR_NOPATH: rv = NS_ERROR_REG_NO_PATH; break; case REGERR_READONLY: rv = NS_ERROR_REG_READ_ONLY; break; case REGERR_BADUTF8: rv = NS_ERROR_REG_BAD_UTF8; break; } return rv; } /*----------------------------- reginfo2DataType ------------------------------- | This utility function converts the type field in the REGINFO structure to | | the corresponding nsIRegistry::DataType value. | ------------------------------------------------------------------------------*/ static void reginfo2DataType( const REGINFO &in, PRUint32 &out ) { // Transfer information, based on entry type. switch( in.entryType ) { case REGTYPE_ENTRY_STRING_UTF: out = nsIRegistry::String; //out.length = in.entryLength; break; case REGTYPE_ENTRY_INT32_ARRAY: out = nsIRegistry::Int32; // Convert length in bytes to array dimension. //out.length = in.entryLength / sizeof(PRInt32); break; case REGTYPE_ENTRY_BYTES: out = nsIRegistry::Bytes; //out.length = in.entryLength; break; case REGTYPE_ENTRY_FILE: out = nsIRegistry::File; //out.length = in.entryLength; break; } } /*----------------------------- reginfo2DataType ------------------------------- | This utility function converts the length field in the REGINFO structure to | | the proper units (if type==Int32 array, we divide by sizeof(PRInt32)). | ------------------------------------------------------------------------------*/ static void reginfo2Length( const REGINFO &in, PRUint32 &out ) { // Transfer information, based on entry type. switch( in.entryType ) { case REGTYPE_ENTRY_STRING_UTF: out = in.entryLength; break; case REGTYPE_ENTRY_INT32_ARRAY: // Convert length in bytes to array dimension. out = in.entryLength / sizeof(PRInt32); break; case REGTYPE_ENTRY_BYTES: out = in.entryLength; break; case REGTYPE_ENTRY_FILE: out = in.entryLength; break; } } /*------------------------ nsISupports Implementation -------------------------- | This code generates the implementation of the nsISupports member functions | | for each class implemented in this file. | ------------------------------------------------------------------------------*/ NS_IMPL_THREADSAFE_ISUPPORTS2(nsRegistry, nsIRegistry, nsIRegistryGetter) NS_IMPL_ISUPPORTS2( nsRegSubtreeEnumerator, nsIEnumerator, nsIRegistryEnumerator) NS_IMPL_ISUPPORTS1( nsRegistryNode, nsIRegistryNode ) NS_IMPL_ISUPPORTS1( nsRegistryValue, nsIRegistryValue ) /*-------------------------- nsRegistry::nsRegistry ---------------------------- | Vanilla nsRegistry constructor. | ------------------------------------------------------------------------------*/ nsRegistry::nsRegistry() : mReg(0), mCurRegID(0) { #ifdef EXTRA_THREADSAFE mregLock = PR_NewLock(); #endif NR_StartupRegistry(); return; } /*------------------------- nsRegistry::~nsRegistry ---------------------------- | The dtor closes the registry file(if open). | ------------------------------------------------------------------------------*/ nsRegistry::~nsRegistry() { if( mReg ) { Close(); } #ifdef EXTRA_THREADSAFE if (mregLock) { PR_DestroyLock(mregLock); } #endif NR_ShutdownRegistry(); return; } /*----------------------------- nsRegistry::Open ------------------------------- | If the argument is null, delegate to OpenDefault, else open the registry | | file. We first check to see if a registry file is already open and close | | it if so. | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegistry::Open( nsIFile *regFile ) { REGERR err = REGERR_OK; // Check for default. if( !regFile ) { return OpenWellKnownRegistry(nsIRegistry::ApplicationRegistry); } nsCAutoString regPath; nsresult rv = regFile->GetNativePath(regPath); if (NS_FAILED(rv)) return rv; #ifdef DEBUG_dp printf("nsRegistry: Opening registry %s\n", regPath.get()); #endif /* DEBUG_dp */ if (mCurRegID != nsIRegistry::None && mCurRegID != nsIRegistry::ApplicationCustomRegistry) { // Cant open another registry without closing explictly. return NS_ERROR_INVALID_ARG; } // Do we have an open registry ? if (mCurRegID != nsIRegistry::None) { PRBool equals; if (mCurRegFile && NS_SUCCEEDED(mCurRegFile->Equals(regFile, &equals)) && equals) { // The right one is already open return NS_OK; } else { // Opening a new registry without closing an already open one. // This is an error. return NS_ERROR_FAILURE; } } // Open specified registry. PR_Lock(mregLock); err = NR_RegOpen(NS_CONST_CAST(char*,regPath.get()), &mReg); PR_Unlock(mregLock); mCurRegID = nsIRegistry::ApplicationCustomRegistry; // No error checking for no mem. Trust me. if (NS_FAILED(regFile->Clone(getter_AddRefs(mCurRegFile)))) mCurRegFile = nsnull; // not fatal // Convert the result. return regerr2nsresult( err ); } static void EnsureDefaultRegistryDirectory() { #if defined(XP_UNIX) && !defined(XP_MACOSX) // Create ~/.mozilla as that is the default place for the registry file /* The default registry on the unix system is $HOME/.mozilla/registry per * vr_findGlobalRegName(). vr_findRegFile() will create the registry file * if it doesn't exist. But it wont create directories. * * Hence we need to create the directory if it doesn't exist already. * * Why create it here as opposed to the app ? * ------------------------------------------ * The app cannot create the directory in main() as most of the registry * and initialization happens due to use of static variables. * And we dont want to be dependent on the order in which * these static stuff happen. * * Permission for the $HOME/.mozilla will be Read,Write,Execute * for user only. Nothing to group and others. */ char *home = getenv("HOME"); if (home != NULL) { char dotMozillaDir[1024]; PR_snprintf(dotMozillaDir, sizeof(dotMozillaDir), "%s/" MOZ_USER_DIR, home); if (PR_Access(dotMozillaDir, PR_ACCESS_EXISTS) != PR_SUCCESS) { PR_MkDir(dotMozillaDir, NS_MOZILLA_DIR_PERMISSION); PR_LOG(nsComponentManagerLog, PR_LOG_ALWAYS, ("nsComponentManager: Creating Directory %s", dotMozillaDir)); } } #endif /* XP_UNIX */ #ifdef XP_BEOS BPath p; const char *settings = "/boot/home/config/settings"; if(find_directory(B_USER_SETTINGS_DIRECTORY, &p) == B_OK) settings = p.Path(); char settingsMozillaDir[1024]; PR_snprintf(settingsMozillaDir, sizeof(settingsMozillaDir), "%s/" MOZ_USER_DIR, settings); if (PR_Access(settingsMozillaDir, PR_ACCESS_EXISTS) != PR_SUCCESS) { PR_MkDir(settingsMozillaDir, NS_MOZILLA_DIR_PERMISSION); PR_LOG(nsComponentManagerLog, PR_LOG_ALWAYS, ("nsComponentManager: Creating Directory %s", settingsMozillaDir)); } #endif } /*----------------------------- nsRegistry::OpenWellKnownRegistry -------------- | Takes a registry id and maps that to a file name for opening. We first check | | to see if a registry file is already open and close it if so. | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegistry::OpenWellKnownRegistry( nsWellKnownRegistry regid ) { REGERR err = REGERR_OK; if (mCurRegID != nsIRegistry::None && mCurRegID != regid) { // Cant open another registry without closing explictly. return NS_ERROR_INVALID_ARG; } if (mCurRegID == regid) { // Already opened. return NS_OK; } nsresult rv; nsCOMPtr registryLocation; PRBool foundReg = PR_FALSE; nsCAutoString regFile; switch ( (nsWellKnownRegistry) regid ) { case ApplicationComponentRegistry: NS_WARNING("ApplicationComponentRegistry is unsupported!"); break; case ApplicationRegistry: { EnsureDefaultRegistryDirectory(); nsCOMPtr directoryService = do_GetService(NS_DIRECTORY_SERVICE_CONTRACTID, &rv); if (NS_FAILED(rv)) return rv; directoryService->Get(NS_APP_APPLICATION_REGISTRY_FILE, NS_GET_IID(nsIFile), getter_AddRefs(registryLocation)); if (registryLocation) { foundReg = PR_TRUE; rv = registryLocation->GetNativePath(regFile); // dougt fix... // dveditz needs to fix his registry so that I can pass an // nsIFile interface and not hack if (NS_FAILED(rv)) return rv; } } break; default: break; } if (foundReg == PR_FALSE) { return NS_ERROR_REG_BADTYPE; } #ifdef DEBUG_dp printf("nsRegistry: Opening std registry %s\n", regFile.get()); #endif /* DEBUG_dp */ PR_Lock(mregLock); err = NR_RegOpen(NS_CONST_CAST(char*, regFile.get()), &mReg ); PR_Unlock(mregLock); // Store the registry that was opened for optimizing future opens. mCurRegID = regid; // Convert the result. return regerr2nsresult( err ); } #if 0 /*-------------------------- nsRegistry::OpenDefault --------------------------- | Open the "default" registry; in the case of this libreg-based implementation | | that is done by passing a null file name pointer to NR_RegOpen. | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegistry::OpenDefault() { return OpenWellKnownRegistry(nsIRegistry::ApplicationRegistry); } #endif /*----------------------------- nsRegistry::Close ------------------------------ | Tests the mReg handle and if non-null, closes the registry via NR_RegClose. | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegistry::Close() { REGERR err = REGERR_OK; if( mReg ) { PR_Lock(mregLock); err = NR_RegClose( mReg ); PR_Unlock(mregLock); mReg = 0; mCurRegFile = nsnull; mCurRegID = 0; } return regerr2nsresult( err ); } /*----------------------------- nsRegistry::Flush ------------------------------ | Flushes the registry via NR_RegFlush. | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegistry::Flush() { REGERR err = REGERR_FAIL; if( mReg ) { PR_Lock(mregLock); err = NR_RegFlush( mReg ); PR_Unlock(mregLock); } return regerr2nsresult( err ); } /*----------------------------- nsRegistry::IsOpen ----------------------------- | Tests the mReg handle and returns whether the registry is open or not. | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegistry::IsOpen( PRBool *result ) { *result = ( mReg != 0 ); return NS_OK; } /*--------------------------- nsRegistry::AddKey ------------------------------- | Add a key into the registry or find an existing one. This is generally used | | instead of GetKey unless it's an error for the key not to exist already i ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegistry::AddKey( nsRegistryKey baseKey, const PRUnichar *keyname, nsRegistryKey *_retval) { if ( !keyname ) return NS_ERROR_NULL_POINTER; return AddSubtree( baseKey, NS_ConvertUCS2toUTF8(keyname).get(), _retval ); } /*--------------------------- nsRegistry::GetKey ------------------------------- | returns the nsRegistryKey associated with a given node in the registry | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegistry::GetKey(nsRegistryKey baseKey, const PRUnichar *keyname, nsRegistryKey *_retval) { if ( !keyname || !_retval ) return NS_ERROR_NULL_POINTER; return GetSubtree( baseKey, NS_ConvertUCS2toUTF8(keyname).get(), _retval ); } /*--------------------------- nsRegistry::RemoveKey ---------------------------- | Delete a key from the registry | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegistry::RemoveKey(nsRegistryKey baseKey, const PRUnichar *keyname) { if ( !keyname ) return NS_ERROR_NULL_POINTER; return RemoveSubtree( baseKey, NS_ConvertUCS2toUTF8(keyname).get() ); } NS_IMETHODIMP nsRegistry::GetString(nsRegistryKey baseKey, const PRUnichar *valname, PRUnichar **_retval) { // Make sure caller gave us place for result. if ( !valname || !_retval ) return NS_ERROR_NULL_POINTER; // initialize the return value *_retval = nsnull; nsXPIDLCString tmpstr; nsresult rv = GetStringUTF8( baseKey, NS_ConvertUCS2toUTF8(valname).get(), getter_Copies(tmpstr) ); if (NS_SUCCEEDED(rv)) { *_retval = nsTextFormatter::smprintf( widestrFormat, tmpstr.get() ); if ( *_retval == nsnull ) rv = NS_ERROR_OUT_OF_MEMORY; } return rv; } NS_IMETHODIMP nsRegistry::SetString(nsRegistryKey baseKey, const PRUnichar *valname, const PRUnichar *value) { if ( !valname || ! value ) return NS_ERROR_NULL_POINTER; return SetStringUTF8( baseKey, NS_ConvertUCS2toUTF8(valname).get(), NS_ConvertUCS2toUTF8(value).get() ); } /*--------------------------- nsRegistry::GetString ---------------------------- | First, look for the entry using GetValueInfo. If found, and it's a string, | | allocate space for it and fetch the value. | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegistry::GetStringUTF8( nsRegistryKey baseKey, const char *path, char **result ) { nsresult rv = NS_OK; REGERR err = REGERR_OK; // Make sure caller gave us place for result. if ( !result ) return NS_ERROR_NULL_POINTER; char regStr[MAXREGPATHLEN]; // initialize the return value *result = 0; // Attempt to get string into our fixed buffer PR_Lock(mregLock); err = NR_RegGetEntryString( mReg,(RKEY)baseKey,(char*)path, regStr, sizeof(regStr) ); PR_Unlock(mregLock); if ( err == REGERR_OK ) { *result = nsCRT::strdup(regStr); if (!*result) rv = NS_ERROR_OUT_OF_MEMORY; } else if ( err == REGERR_BUFTOOSMALL ) { // find the real size and malloc it PRUint32 length; rv = GetValueLength( baseKey, path, &length ); // See if that worked. if( rv == NS_OK ) { *result =(char*)nsMemory::Alloc( length + 1 ); if( *result ) { // Get string from registry into result buffer. PR_Lock(mregLock); err = NR_RegGetEntryString( mReg,(RKEY)baseKey,(char*)path, *result, length+1 ); PR_Unlock(mregLock); // Convert status. rv = regerr2nsresult( err ); if ( rv != NS_OK ) { // Didn't get result, free buffer nsCRT::free( *result ); *result = 0; } } else { rv = NS_ERROR_OUT_OF_MEMORY; } } } else { // Convert status. rv = regerr2nsresult( err ); NS_ASSERTION(NS_FAILED(rv), "returning success code on failure"); } return rv; } NS_IMETHODIMP nsRegistry::GetStringUTF8IntoBuffer( nsRegistryKey baseKey, const char *path, char *buf, PRUint32 *length ) { REGERR err = REGERR_OK; // Attempt to get string into our fixed buffer PR_Lock(mregLock); err = NR_RegGetEntryString( mReg,(RKEY)baseKey,(char*)path, buf, *length ); PR_Unlock(mregLock); // Convert status. nsresult rv = regerr2nsresult( err ); if (rv == NS_ERROR_REG_BUFFER_TOO_SMALL) { // fill length with the actual length nsresult rv1 = GetValueLength( baseKey, path, length ); if(NS_FAILED(rv1)) return rv1; } return rv; } /*--------------------------- nsRegistry::SetString ---------------------------- | Simply sets the registry contents using NR_RegSetEntryString. | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegistry::SetStringUTF8( nsRegistryKey baseKey, const char *path, const char *value ) { REGERR err = REGERR_OK; // Set the contents. PR_Lock(mregLock); err = NR_RegSetEntryString( mReg,(RKEY)baseKey,(char*)path,(char*)value ); PR_Unlock(mregLock); // Convert result. return regerr2nsresult( err ); } /*---------------------------- nsRegistry::GetBytesUTF8 ------------------------------ | This function is just shorthand for fetching a char array. We | | implement it "manually" using NR_RegGetEntry | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegistry::GetBytesUTF8( nsRegistryKey baseKey, const char *path, PRUint32* length, PRUint8** result) { nsresult rv = NS_OK; REGERR err = REGERR_OK; if ( !result ) return NS_ERROR_NULL_POINTER; char regStr[MAXREGPATHLEN]; // initialize the return value *length = 0; *result = 0; // Get info about the requested entry. PRUint32 type; rv = GetValueType( baseKey, path, &type ); // See if that worked. if( rv == NS_OK ) { // Make sure the entry is an PRInt8 array. if( type == Bytes ) { // Attempt to get string into our fixed buffer PR_Lock(mregLock); uint32 length2 = sizeof regStr; err = NR_RegGetEntry( mReg,(RKEY)baseKey,NS_CONST_CAST(char*,path), regStr, &length2); PR_Unlock(mregLock); if ( err == REGERR_OK ) { *length = length2; *result = (PRUint8*)(nsCRT::strdup(regStr)); if (!*result) { rv = NS_ERROR_OUT_OF_MEMORY; *length = 0; } else { *length = length2; } } else if ( err == REGERR_BUFTOOSMALL ) { // find the real size and malloc it rv = GetValueLength( baseKey, path, length ); // See if that worked. if( rv == NS_OK ) { *result = NS_REINTERPRET_CAST(PRUint8*,nsMemory::Alloc( *length )); if( *result ) { // Get bytes from registry into result field. PR_Lock(mregLock); length2 = *length; err = NR_RegGetEntry( mReg,(RKEY)baseKey,NS_CONST_CAST(char*,path), *result, &length2); *length = length2; PR_Unlock(mregLock); // Convert status. rv = regerr2nsresult( err ); if ( rv != NS_OK ) { // Didn't get result, free buffer nsCRT::free( NS_REINTERPRET_CAST(char*, *result) ); *result = 0; *length = 0; } } else { rv = NS_ERROR_OUT_OF_MEMORY; } } } } else { // They asked for the wrong type of value. rv = NS_ERROR_REG_BADTYPE; } } return rv; } NS_IMETHODIMP nsRegistry::GetBytesUTF8IntoBuffer( nsRegistryKey baseKey, const char *path, PRUint8 *buf, PRUint32* length ) { REGERR err = REGERR_OK; // Get info about the requested entry. PRUint32 type; nsresult rv = GetValueType( baseKey, path, &type ); // See if that worked. if(NS_FAILED(rv)) return rv; // Make sure we are dealing with bytes if (type != Bytes) return NS_ERROR_REG_BADTYPE; // Attempt to get bytes into our fixed buffer PR_Lock(mregLock); err = NR_RegGetEntry( mReg,(RKEY)baseKey,NS_CONST_CAST(char*,path), buf, (uint32 *)length ); PR_Unlock(mregLock); rv = regerr2nsresult(rv); if (rv == NS_ERROR_REG_BUFFER_TOO_SMALL) { // fill length with the actual length nsresult rv1 = GetValueLength( baseKey, path, length ); if(NS_FAILED(rv1)) return rv1; } return rv; } /*---------------------------- nsRegistry::GetInt ------------------------------ | This function is just shorthand for fetching a 1-element PRInt32 array. We | | implement it "manually" using NR_RegGetEntry | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegistry::GetInt( nsRegistryKey baseKey, const char *path, PRInt32 *result ) { nsresult rv = NS_OK; REGERR err = REGERR_OK; // Make sure caller gave us place for result. if( result ) { // Get info about the requested entry. PRUint32 type; rv = GetValueType( baseKey, path, &type ); // See if that worked. if( rv == NS_OK ) { // Make sure the entry is an PRInt32 array. if( type == Int32 ) { uint32 len = sizeof *result; // Get int from registry into result field. PR_Lock(mregLock); err = NR_RegGetEntry( mReg,(RKEY)baseKey,(char*)path, result, &len ); PR_Unlock(mregLock); // Convert status. rv = regerr2nsresult( err ); } else { // They asked for the wrong type of value. rv = NS_ERROR_REG_BADTYPE; } } } else { rv = NS_ERROR_NULL_POINTER; } return rv; } /*---------------------------- nsRegistry::GetLongLong-------------------------- | This function is just shorthand for fetching a 1-element PRInt64 array. We | | implement it "manually" using NR_RegGetEntry | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegistry::GetLongLong( nsRegistryKey baseKey, const char *path, PRInt64 *result ) { REGERR err = REGERR_OK; PR_Lock(mregLock); uint32 length = sizeof(PRInt64); err = NR_RegGetEntry( mReg,(RKEY)baseKey,(char*)path,(void*)result,&length); PR_Unlock(mregLock); // Convert status. return regerr2nsresult( err ); } /*---------------------------- nsRegistry::SetBytesUTF8 ------------------------------ | Write out the value as a char array, using NR_RegSetEntry. | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegistry::SetBytesUTF8( nsRegistryKey baseKey, const char *path, PRUint32 length, PRUint8* value) { REGERR err = REGERR_OK; // Set the contents. PR_Lock(mregLock); err = NR_RegSetEntry( mReg, (RKEY)baseKey, (char*)path, REGTYPE_ENTRY_BYTES, (char*)value, length); PR_Unlock(mregLock); // Convert result. return regerr2nsresult( err ); } /*---------------------------- nsRegistry::SetInt ------------------------------ | Write out the value as a one-element PRInt32 array, using NR_RegSetEntry. | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegistry::SetInt( nsRegistryKey baseKey, const char *path, PRInt32 value ) { REGERR err = REGERR_OK; // Set the contents. PR_Lock(mregLock); err = NR_RegSetEntry( mReg, (RKEY)baseKey, (char*)path, REGTYPE_ENTRY_INT32_ARRAY, &value, sizeof value ); PR_Unlock(mregLock); // Convert result. return regerr2nsresult( err ); } /*---------------------------- nsRegistry::SetLongLong--------------------------- | Write out the value as a one-element PRInt64 array, using NR_RegSetEntry. | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegistry::SetLongLong( nsRegistryKey baseKey, const char *path, PRInt64* value ) { REGERR err = REGERR_OK; // Set the contents. PR_Lock(mregLock); err = NR_RegSetEntry( mReg, (RKEY)baseKey, (char*)path, REGTYPE_ENTRY_BYTES, (void*)value, sizeof(PRInt64) ); PR_Unlock(mregLock); // Convert result. return regerr2nsresult( err ); } /*-------------------------- nsRegistry::AddSubtree ---------------------------- | Add a new registry subkey with the specified name, using NR_RegAddKey. | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegistry::AddSubtree( nsRegistryKey baseKey, const char *path, nsRegistryKey *result ) { REGERR err = REGERR_OK; // Add the subkey. PR_Lock(mregLock); err = NR_RegAddKey( mReg,(RKEY)baseKey,(char*)path,(RKEY*)result ); PR_Unlock(mregLock); // Convert result. return regerr2nsresult( err ); } /*-------------------------- nsRegistry::AddSubtreeRaw-------------------------- | Add a new registry subkey with the specified name, using NR_RegAddKeyRaw | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegistry::AddSubtreeRaw( nsRegistryKey baseKey, const char *path, nsRegistryKey *result ) { REGERR err = REGERR_OK; // Add the subkey. PR_Lock(mregLock); err = NR_RegAddKeyRaw( mReg,(RKEY)baseKey,(char*)path,(RKEY*)result ); PR_Unlock(mregLock); // Convert result. return regerr2nsresult( err ); } /*------------------------- nsRegistry::RemoveSubtree -------------------------- | Deletes the subtree at a given location using NR_RegDeleteKey. | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegistry::RemoveSubtree( nsRegistryKey baseKey, const char *path ) { nsresult rv = NS_OK; REGERR err = REGERR_OK; // libreg doesn't delete keys if there are subkeys under the key // Hence we have to recurse through to delete the subtree RKEY key; PR_Lock(mregLock); err = NR_RegGetKey(mReg, baseKey, (char *)path, &key); PR_Unlock(mregLock); if (err != REGERR_OK) { rv = regerr2nsresult( err ); return rv; } // Now recurse through and delete all keys under hierarchy char subkeyname[MAXREGPATHLEN+1]; REGENUM state = 0; subkeyname[0] = '\0'; while (NR_RegEnumSubkeys(mReg, key, &state, subkeyname, sizeof(subkeyname), REGENUM_NORMAL) == REGERR_OK) { #ifdef DEBUG_dp printf("...recursing into %s\n", subkeyname); #endif /* DEBUG_dp */ // Even though this is not a "Raw" API the subkeys may still, in fact, // *be* raw. Since we're recursively deleting this will work either way. // If we were guaranteed none would be raw then a depth-first enumeration // would be much more efficient. err = RemoveSubtreeRaw(key, subkeyname); if (err != REGERR_OK) break; } // If success in deleting all subkeys, delete this key too if (err == REGERR_OK) { #ifdef DEBUG_dp printf("...deleting %s\n", path); #endif /* DEBUG_dp */ PR_Lock(mregLock); err = NR_RegDeleteKey(mReg, baseKey, (char *)path); PR_Unlock(mregLock); } // Convert result. rv = regerr2nsresult( err ); return rv; } /*------------------------- nsRegistry::RemoveSubtreeRaw ----------------------- | Deletes the subtree at a given location using NR_RegDeleteKeyRaw | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegistry::RemoveSubtreeRaw( nsRegistryKey baseKey, const char *keyname ) { nsresult rv = NS_OK; REGERR err = REGERR_OK; // libreg doesn't delete keys if there are subkeys under the key // Hence we have to recurse through to delete the subtree RKEY key; char subkeyname[MAXREGPATHLEN+1]; int n = sizeof(subkeyname); REGENUM state = 0; PR_Lock(mregLock); err = NR_RegGetKeyRaw(mReg, baseKey, (char *)keyname, &key); PR_Unlock(mregLock); if (err != REGERR_OK) { rv = regerr2nsresult( err ); return rv; } // Now recurse through and delete all keys under hierarchy subkeyname[0] = '\0'; while (NR_RegEnumSubkeys(mReg, key, &state, subkeyname, n, REGENUM_NORMAL) == REGERR_OK) { #ifdef DEBUG_dp printf("...recursing into %s\n", subkeyname); #endif /* DEBUG_dp */ err = RemoveSubtreeRaw(key, subkeyname); if (err != REGERR_OK) break; } // If success in deleting all subkeys, delete this key too if (err == REGERR_OK) { #ifdef DEBUG_dp printf("...deleting %s\n", keyname); #endif /* DEBUG_dp */ PR_Lock(mregLock); err = NR_RegDeleteKeyRaw(mReg, baseKey, (char *)keyname); PR_Unlock(mregLock); } // Convert result. rv = regerr2nsresult( err ); return rv; } /*-------------------------- nsRegistry::GetSubtree ---------------------------- | Returns a nsRegistryKey(RKEY) for a given key/path. The key is | | obtained using NR_RegGetKey. | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegistry::GetSubtree( nsRegistryKey baseKey, const char *path, nsRegistryKey *result ) { nsresult rv = NS_OK; REGERR err = REGERR_OK; // Make sure we have a place for the result. if( result ) { // Get key. PR_Lock(mregLock); err = NR_RegGetKey( mReg,(RKEY)baseKey,(char*)path,(RKEY*)result ); PR_Unlock(mregLock); // Convert result. rv = regerr2nsresult( err ); } else { rv = NS_ERROR_NULL_POINTER; } return rv; } /*-------------------------- nsRegistry::GetSubtreeRaw-------------------------- | Returns a nsRegistryKey(RKEY) for a given key/path. The key is | | obtained using NR_RegGetKeyRaw. | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegistry::GetSubtreeRaw( nsRegistryKey baseKey, const char *path, nsRegistryKey *result ) { nsresult rv = NS_OK; REGERR err = REGERR_OK; // Make sure we have a place for the result. if( result ) { // Get key. PR_Lock(mregLock); err = NR_RegGetKeyRaw( mReg,(RKEY)baseKey,(char*)path,(RKEY*)result ); PR_Unlock(mregLock); // Convert result. rv = regerr2nsresult( err ); } else { rv = NS_ERROR_NULL_POINTER; } return rv; } /*----------------------- nsRegistry::EnumerateSubtrees ------------------------ | Allocate a nsRegSubtreeEnumerator object and return it to the caller. | | We construct the enumerator using the registry handle from this registry | | object, the user-specified registry key, and indicate that we don't want | | to recurse down subtrees. No libreg functions are invoked at this point | |(that will happen when the enumerator member functions are called). | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegistry::EnumerateSubtrees( nsRegistryKey baseKey, nsIEnumerator **result ) { nsresult rv = NS_OK; // Make sure we have a place to put the result. if( result ) { *result = new nsRegSubtreeEnumerator( mReg,(RKEY)baseKey, PR_FALSE ); // Check for success. if( *result ) { // Bump refcnt on behalf of caller. NS_ADDREF(*result); } else { // Unable to allocate space for the enumerator object. rv = NS_ERROR_OUT_OF_MEMORY; } } else { rv = NS_ERROR_NULL_POINTER; } return rv; } /*--------------------- nsRegistry::EnumerateAllSubtrees ----------------------- | Same as EnumerateSubtrees but we pass PR_TRUE to request that the | | enumerator object descend subtrees when it is used. | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegistry::EnumerateAllSubtrees( nsRegistryKey baseKey, nsIEnumerator **result ) { nsresult rv = NS_OK; // Make sure we have a place to put the result. if( result ) { *result = new nsRegSubtreeEnumerator( mReg,(RKEY)baseKey, PR_TRUE ); // Check for success. if( *result ) { // Bump refcnt on behalf of caller. NS_ADDREF(*result); } else { // Unable to allocate space for the enumerator object. rv = NS_ERROR_OUT_OF_MEMORY; } } else { rv = NS_ERROR_NULL_POINTER; } return rv; } /*------------------------- nsRegistry::GetValueType --------------------------- | Gets the type from the registry using the NR_GetEntryInfo libreg API. | | The result is transferred to the PRUint32 value passed in (with conversion | | to the appropriate nsIRegistry::DataType value). | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegistry::GetValueType( nsRegistryKey baseKey, const char *path, PRUint32 *result ) { nsresult rv = NS_OK; REGERR err = REGERR_OK; // Make sure we have a place to put the result. if( result ) { // Get registry info into local structure. REGINFO info = { sizeof info, 0, 0 }; PR_Lock(mregLock); err = NR_RegGetEntryInfo( mReg,(RKEY)baseKey,(char*)path, &info ); PR_Unlock(mregLock); if( err == REGERR_OK ) { // Copy info to user's result value. reginfo2DataType( info, *result ); } else { rv = regerr2nsresult( err ); } } else { rv = NS_ERROR_NULL_POINTER; } return rv; } /*------------------------ nsRegistry::GetValueLength -------------------------- | Gets the registry value info via NR_RegGetEntryInfo. The length is | | converted to the proper "units" via reginfo2Length. | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegistry::GetValueLength( nsRegistryKey baseKey, const char *path, PRUint32 *result ) { nsresult rv = NS_OK; REGERR err = REGERR_OK; // Make sure we have a place to put the result. if( result ) { // Get registry info into local structure. REGINFO info = { sizeof info, 0, 0 }; PR_Lock(mregLock); err = NR_RegGetEntryInfo( mReg,(RKEY)baseKey,(char*)path, &info ); PR_Unlock(mregLock); if( err == REGERR_OK ) { // Copy info to user's result value. reginfo2Length( info, *result ); } else { rv = regerr2nsresult( err ); } } else { rv = NS_ERROR_NULL_POINTER; } return rv; } /*-------------------------- nsRegistry::DeleteValue --------------------------- | Remove the registry value with the specified name | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegistry::DeleteValue( nsRegistryKey baseKey, const char *path) { REGERR err = REGERR_OK; // Delete the value PR_Lock(mregLock); err = NR_RegDeleteEntry( mReg,(RKEY)baseKey,(char*)path ); PR_Unlock(mregLock); // Convert result. return regerr2nsresult( err ); } /*------------------------ nsRegistry::EnumerateValues ------------------------- | Allocates and returns an instance of nsRegValueEnumerator constructed in | | a similar fashion as the nsRegSubtreeEnumerator is allocated/returned by | | EnumerateSubtrees. | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegistry::EnumerateValues( nsRegistryKey baseKey, nsIEnumerator **result ) { nsresult rv = NS_OK; // Make sure we have a place to put the result. if( result ) { *result = new nsRegValueEnumerator( mReg,(RKEY)baseKey ); // Check for success. if( *result ) { // Bump refcnt on behalf of caller. NS_ADDREF(*result); } else { // Unable to allocate space for the enumerator object. rv = NS_ERROR_OUT_OF_MEMORY; } } else { rv = NS_ERROR_NULL_POINTER; } return rv; } /*---------------------- nsRegistry::GetCurrentUserName ------------------------ | Simple wrapper for NR_RegGetUsername. | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegistry::GetCurrentUserName( char **result ) { nsresult rv = NS_OK; REGERR err = REGERR_OK; // Make sure we have a place to put the result. if( result ) { // Get the user name. PR_Lock(mregLock); err = NR_RegGetUsername( result ); PR_Unlock(mregLock); // Convert the result. rv = regerr2nsresult( err ); } else { rv = NS_ERROR_NULL_POINTER; } return rv; } /*---------------------- nsRegistry::SetCurrentUserName ------------------------ | Simple wrapper for NR_RegSetUsername. | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegistry::SetCurrentUserName( const char *name ) { nsresult rv = NS_OK; REGERR err = REGERR_OK; // Set the user name. PR_Lock(mregLock); err = NR_RegSetUsername( name ); PR_Unlock(mregLock); // Convert result. rv = regerr2nsresult( err ); return rv; } /*----------------------------- nsRegistry::Pack ------------------------------- | Simple wrapper for NR_RegPack. We don't set up any callback. | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegistry::Pack() { nsresult rv = NS_OK; REGERR err = REGERR_OK; // Pack the registry. PR_Lock(mregLock); err = NR_RegPack( mReg, 0, 0 ); PR_Unlock(mregLock); // Convert result. rv = regerr2nsresult( err ); return rv; } /*----------------------------- nsRegistry::EscapeKey ------------------------------- | Escape a binary key so that the registry works OK, since it expects UTF8 | with no slashes or control characters. This is probably better than raw. | If no escaping is required, then the method is successful and a null is | returned, indicating that the caller should use the original string. ------------------------------------------------------------------------------*/ static const char sEscapeKeyHex[] = "0123456789abcdef0123456789ABCDEF"; NS_IMETHODIMP nsRegistry::EscapeKey(PRUint8* key, PRUint32 termination, PRUint32* length, PRUint8** escaped) { nsresult rv = NS_OK; char* value = (char*)key; char* b = value; char* e = b + *length; int escapees = 0; while (b < e) // Count characters outside legal range or slash { int c = *b++; if (c <= ' ' || c > '~' || c == '/' || c == '%') { escapees++; } } if (escapees == 0) // If no escapees, then no results { *length = 0; *escaped = nsnull; return NS_OK; } // New length includes two extra chars for escapees. *length += escapees * 2; *escaped = (PRUint8*)nsMemory::Alloc(*length + termination); if (*escaped == nsnull) { *length = 0; *escaped = nsnull; return NS_ERROR_OUT_OF_MEMORY; } char* n = (char*)*escaped; b = value; while (escapees && b < e) { char c = *b++; if (c < ' ' || c > '~' || c == '/' || c == '%') { *(n++) = '%'; *(n++) = sEscapeKeyHex[ 0xF & (c >> 4) ]; *(n++) = sEscapeKeyHex[ 0xF & c ]; escapees--; } else { *(n++) = c; } } e += termination; if (b < e) { strncpy(n, b, e - b); } return rv; } /*----------------------------- nsRegistry::UnescapeKey ------------------------------- | Unscape a binary key so that the registry works OK, since it expects UTF8 | with no slashes or control characters. This is probably better than raw. | If no escaping is required, then the method is successful and a null is | returned, indicating that the caller should use the original string. ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegistry::UnescapeKey(PRUint8* escaped, PRUint32 termination, PRUint32* length, PRUint8** key) { nsresult rv = NS_OK; char* value = (char*)escaped; char* b = value; char* e = b + *length; int escapees = 0; while (b < e) // Count characters outside legal range or slash { if (*b++ == '%') { escapees++; } } if (escapees == 0) // If no escapees, then no results { *length = 0; *key = nsnull; return NS_OK; } // New length includes two extra chars for escapees. *length -= escapees * 2; *key = (PRUint8*)nsMemory::Alloc(*length + termination); if (*key == nsnull) { *length = 0; *key = nsnull; return NS_ERROR_OUT_OF_MEMORY; } char* n = (char*)*key; b = value; while (escapees && b < e) { char c = *(b++); if (c == '%') { if (e - b >= 2) { const char* c1 = strchr(sEscapeKeyHex, *(b++)); const char* c2 = strchr(sEscapeKeyHex, *(b++)); if (c1 != nsnull && c2 != nsnull) { *(n++) = ((c2 - sEscapeKeyHex) & 0xF) | (((c1 - sEscapeKeyHex) & 0xF) << 4); } else { escapees = -1; } } else { escapees = -1; } escapees--; } else { *(n++) = c; } } if (escapees < 0) { nsMemory::Free(*key); *length = 0; *key = nsnull; return NS_ERROR_INVALID_ARG; } e += termination; if (b < e) { strncpy(n, b, e - b); } return rv; } /*-------------- nsRegistry::SetBufferSize------------------------------------- | Sets the size of the file used for the registry's buffer size. | ------------------------------------------------------------------------------*/ int nsRegistry::SetBufferSize( int bufsize ) { int newSize; // set the file buffer size PR_Lock(mregLock); newSize = NR_RegSetBufferSize( mReg, bufsize ); PR_Unlock(mregLock); return newSize; } /*-------------- nsRegSubtreeEnumerator::nsRegSubtreeEnumerator ---------------- | The ctor simply stashes all the information that will be needed to enumerate | | the subkeys. | ------------------------------------------------------------------------------*/ nsRegSubtreeEnumerator::nsRegSubtreeEnumerator( HREG hReg, RKEY rKey, PRBool all ) : mReg( hReg ), mKey( rKey ), mEnum( 0 ), mNext( 0 ), mStyle( all ? REGENUM_DESCEND : REGENUM_CHILDREN ), mDone( PR_FALSE ) { mName[0] = '\0'; #ifdef EXTRA_THREADSAFE // Create a registry lock mregLock = PR_NewLock(); #endif return; } nsRegSubtreeEnumerator::~nsRegSubtreeEnumerator() { #ifdef EXTRA_THREADSAFE if (mregLock) { PR_DestroyLock(mregLock); } #endif } /*----------------------- nsRegSubtreeEnumerator::First ------------------------ | Set mEnum to 0; this will cause the next NR_RegEnum call to go to | | the beginning. We then do a Next() call in order to do a "lookahead" to | | properly detect an empty list (i.e., set the mDone flag). | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegSubtreeEnumerator::First() { nsresult rv = NS_OK; // Reset "done" flag. mDone = PR_FALSE; // Clear Name mName[0] = '\0'; // Go to beginning. mEnum = mNext = 0; // Lookahead so mDone flag gets set for empty list. rv = Next(); return rv; } /*----------------------- nsRegSubtreeEnumerator::Next ------------------------- | First, we check if we've already advanced to the end by checking the mDone | | flag. | | | | We advance mEnum to the next enumeration value which is in the mNext | | lookahead buffer. We must then call advance to lookahead and properly set | | the isDone flag. | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegSubtreeEnumerator::Next() { nsresult rv = NS_OK; // Check for at end. if ( !mDone ) { // Advance to next spot. mEnum = mNext; // Lookahead so mDone is properly set (and to update mNext). rv = advance(); } else { // Set result accordingly. rv = regerr2nsresult( REGERR_NOMORE ); } return rv; } /*---------------------- nsRegSubtreeEnumerator::advance ----------------------- | Advance mNext to next subkey using NR_RegEnumSubkeys. We set mDone if | | there are no more subkeys. | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegSubtreeEnumerator::advance() { REGERR err = REGERR_OK; PR_Lock(mregLock); err = NR_RegEnumSubkeys( mReg, mKey, &mNext, mName, sizeof mName, mStyle ); // See if we ran off end. if( err == REGERR_NOMORE ) { // Remember we've run off end. mDone = PR_TRUE; } PR_Unlock(mregLock); // Convert result. nsresult rv = regerr2nsresult( err ); return rv; } /*-------------------- nsRegSubtreeEnumerator::CurrentItem --------------------- | Allocates and returns a new instance of class nsRegistryNode. The node | | object will hold the curent mEnum value so it can obtain its name from | | the registry when asked. | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegSubtreeEnumerator::CurrentItem( nsISupports **result) { nsresult rv = NS_OK; // Make sure there is a place to put the result. if( result ) { *result = new nsRegistryNode( mReg, mName, (RKEY) mNext ); if( *result ) { NS_ADDREF(*result); } else { rv = NS_ERROR_OUT_OF_MEMORY; } } else { rv = NS_ERROR_NULL_POINTER; } return rv; } /*--------------nsRegSubtreeEnumerator::CurrentItemInPlaceUTF8----------------- | An ugly name for an ugly function. Hands back a shared pointer to the | | name (encoded as UTF-8), and the subkey identifier. | -----------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegSubtreeEnumerator::CurrentItemInPlaceUTF8( nsRegistryKey *childKey , const char **name ) { *childKey = mNext; /* [shared] */ *name = mName; return NS_OK; } /*---------------------- nsRegSubtreeEnumerator::IsDone ------------------------ | Simply return mDone. | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegSubtreeEnumerator::IsDone() { nsresult rv = mDone ? NS_OK : NS_ENUMERATOR_FALSE; return rv; } /*---------------- nsRegValueEnumerator::nsRegValueEnumerator ------------------ | Delegates everything to the base class constructor. | ------------------------------------------------------------------------------*/ nsRegValueEnumerator::nsRegValueEnumerator( HREG hReg, RKEY rKey ) : nsRegSubtreeEnumerator( hReg, rKey, PR_FALSE ) { return; } /*--------------------- nsRegValueEnumerator::CurrentItem ---------------------- | As the nsRegSubtreeEnumerator counterpart, but allocates an object of | | class nsRegistryValue. | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegValueEnumerator::CurrentItem( nsISupports **result ) { nsresult rv = NS_OK; // Make sure there is a place to put the result. if( result ) { *result = new nsRegistryValue( mReg, mKey, mEnum ); if( *result ) { NS_ADDREF(*result); } else { rv = NS_ERROR_OUT_OF_MEMORY; } } else { rv = NS_ERROR_NULL_POINTER; } return rv; } /*----------------------- nsRegValueEnumerator::advance ------------------------ | Advance mNext to next subkey using NR_RegEnumEntries. We set mDone if | | there are no more entries. | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegValueEnumerator::advance() { REGERR err = REGERR_OK; char name[MAXREGNAMELEN]; PRUint32 len = sizeof name; REGINFO info = { sizeof info, 0, 0 }; PR_Lock(mregLock); err = NR_RegEnumEntries( mReg, mKey, &mNext, name, len, &info ); // See if we ran off end. if( err == REGERR_NOMORE ) { // Remember we've run off end. mDone = PR_TRUE; } PR_Unlock(mregLock); // Convert result. nsresult rv = regerr2nsresult( err ); return rv; } /*---------------------- nsRegistryNode::nsRegistryNode ------------------------ | Store the arguments in the corresponding data members and initialize | | the other data members. We defer the libreg calls till we're asked for | | our name. We use mErr==-1 to indicate we haven't fetched the name yet. | ------------------------------------------------------------------------------*/ nsRegistryNode::nsRegistryNode( HREG hReg, char *name, RKEY childKey ) : mReg( hReg ), mChildKey( childKey ) { PR_ASSERT(name != nsnull); strcpy(mName, name); #ifdef EXTRA_THREADSAFE mregLock = PR_NewLock(); #endif return; } nsRegistryNode::~nsRegistryNode() { #ifdef EXTRA_THREADSAFE if (mregLock) { PR_DestroyLock(mregLock); } #endif } /*-------------------------- nsRegistryNode::GetName --------------------------- | If we haven't fetched it yet, get the name of the corresponding subkey now, | | using NR_RegEnumSubkeys. | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegistryNode::GetName( PRUnichar **result ) { if (result == nsnull) return NS_ERROR_NULL_POINTER; // Make sure there is a place to put the result. *result = nsTextFormatter::smprintf( widestrFormat, mName ); if ( !*result ) return NS_ERROR_OUT_OF_MEMORY; return NS_OK; } /*-------------------------- nsRegistryNode::GetNameUTF8 ----------------------- | If we haven't fetched it yet, get the name of the corresponding subkey now, | | using NR_RegEnumSubkeys. | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegistryNode::GetNameUTF8( char **result ) { if (result == nsnull) return NS_ERROR_NULL_POINTER; // Make sure there is a place to put the result. *result = nsCRT::strdup( mName ); if ( !*result ) return NS_ERROR_OUT_OF_MEMORY; return NS_OK; } /*-------------------------- nsRegistryNode::GetKey ---------------------------- | Get the subkey corresponding to this node | | using NR_RegEnumSubkeys. | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegistryNode::GetKey( nsRegistryKey *r_key ) { nsresult rv = NS_OK; if (r_key == nsnull) return NS_ERROR_NULL_POINTER; *r_key = mChildKey; return rv; } /*--------------------- nsRegistryValue::nsRegistryValue ----------------------- | Implemented the same way as the nsRegistryNode ctor. | ------------------------------------------------------------------------------*/ nsRegistryValue::nsRegistryValue( HREG hReg, RKEY key, REGENUM slot ) : mReg( hReg ), mKey( key ), mEnum( slot ), mErr( -1 ) { #ifdef EXTRA_THREADSAFE mregLock = PR_NewLock(); #endif mInfo.size = sizeof(REGINFO); } nsRegistryValue::~nsRegistryValue() { #ifdef EXTRA_THREADSAFE if (mregLock) { PR_DestroyLock(mregLock); } #endif } /*------------------------- nsRegistryValue::GetName --------------------------- | See nsRegistryNode::GetName; we use NR_RegEnumEntries in this case. | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegistryValue::GetName( PRUnichar **result ) { nsresult rv = NS_OK; // Make sure we have a place to put the result. if( result ) { // Ensure we've got the info we need. rv = getInfo(); if( rv == NS_OK || rv == NS_ERROR_REG_NO_MORE ) { // worked, return actual result. *result = nsTextFormatter::smprintf( widestrFormat, mName ); if ( *result ) { rv = NS_OK; } else { rv = NS_ERROR_OUT_OF_MEMORY; } } } else { rv = NS_ERROR_NULL_POINTER; } return rv; } /*------------------------- nsRegistryValue::GetNameUTF8 ----------------------- | See nsRegistryNode::GetName; we use NR_RegEnumEntries in this case. | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegistryValue::GetNameUTF8( char **result ) { nsresult rv = NS_OK; // Make sure we have a place to put the result. if( result ) { // Ensure we've got the info we need. rv = getInfo(); if( rv == NS_OK || rv == NS_ERROR_REG_NO_MORE ) { // worked, return actual result. *result = nsCRT::strdup( mName ); if ( *result ) { rv = NS_OK; } else { rv = NS_ERROR_OUT_OF_MEMORY; } } } else { rv = NS_ERROR_NULL_POINTER; } return rv; } /*----------------------- nsRegistryValue::GetType ------------------------ | We test if we've got the info already. If not, we git it by calling | | getInfo. We calculate the result by converting the REGINFO type field to | | a nsIRegistry::DataType value (using reginfo2DataType). | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegistryValue::GetType( PRUint32 *result ) { nsresult rv = NS_OK; // Make sure we have room for th result. if( result ) { // Make sure we've got the info we need. rv = getInfo(); // Check if it worked. if( rv == NS_OK ) { // Convert result from REGINFO to nsIRegistry::ValueInfo. reginfo2DataType( mInfo, *result ); } } else { rv = NS_ERROR_NULL_POINTER; } return rv; } /*---------------------- nsRegistryValue::GetLength ----------------------- | We test if we've got the info already. If not, we git it by calling | | getInfo. We calculate the result by converting the REGINFO type field to | | a nsIRegistry::DataType value (using reginfo2Length). | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegistryValue::GetLength( PRUint32 *result ) { nsresult rv = NS_OK; // Make sure we have room for th result. if( result ) { // Make sure we've got the info we need. rv = getInfo(); // Check if it worked. if( rv == NS_OK ) { // Convert result from REGINFO to length. reginfo2Length( mInfo, *result ); } } else { rv = NS_ERROR_NULL_POINTER; } return rv; } /*------------------------- nsRegistryValue::getInfo --------------------------- | Call NR_RegEnumEntries to set the mInfo/mName data members. | ------------------------------------------------------------------------------*/ nsresult nsRegistryValue::getInfo() { nsresult rv = NS_OK; // Test whether we haven't tried to get it yet. if( mErr == -1 ) { REGENUM temp = mEnum; // Get name and info. PR_Lock(mregLock); mErr = NR_RegEnumEntries( mReg, mKey, &temp, mName, sizeof mName, &mInfo ); // Convert result. rv = regerr2nsresult( mErr ); PR_Unlock(mregLock); } return rv; } nsRegistryFactory::nsRegistryFactory() { } NS_IMPL_ISUPPORTS1(nsRegistryFactory, nsIFactory) NS_IMETHODIMP nsRegistryFactory::CreateInstance(nsISupports *aOuter, const nsIID &aIID, void **aResult) { nsresult rv = NS_OK; nsRegistry* newRegistry; if(aResult == nsnull) { return NS_ERROR_NULL_POINTER; } else { *aResult = nsnull; } if(0 != aOuter) { return NS_ERROR_NO_AGGREGATION; } NS_NEWXPCOM(newRegistry, nsRegistry); if(newRegistry == nsnull) { return NS_ERROR_OUT_OF_MEMORY; } NS_ADDREF(newRegistry); rv = newRegistry->QueryInterface(aIID, aResult); NS_RELEASE(newRegistry); return rv; } nsresult nsRegistryFactory::LockFactory(PRBool aLock) { // Not implemented in simplest case. return NS_OK; } // This is a temporary hack; needs work to support dynamic binding // via nsComponentManager and support for multiple factories per DLL. extern "C" NS_EXPORT nsresult NS_RegistryGetFactory(nsIFactory** aFactory ) { nsresult rv = NS_OK; if( aFactory == 0 ) { return NS_ERROR_NULL_POINTER; } else { *aFactory = 0; } nsIFactory* inst = new nsRegistryFactory(); if(0 == inst) { rv = NS_ERROR_OUT_OF_MEMORY; } else { NS_ADDREF(inst); *aFactory = inst; } return rv; }