/* -*- Mode: Java; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*-
 *
 * ***** BEGIN LICENSE BLOCK *****
 * Version: MPL 1.1/GPL 2.0/LGPL 2.1
 *
 * The contents of this file are subject to the Mozilla Public License Version
 * 1.1 (the "License"); you may not use this file except in compliance with
 * the License. You may obtain a copy of the License at
 * http://www.mozilla.org/MPL/
 *
 * Software distributed under the License is distributed on an "AS IS" basis,
 * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
 * for the specific language governing rights and limitations under the
 * License.
 *
 * The Original Code is Mozilla Communicator client code, released
 * March 31, 1998.
 *
 * The Initial Developer of the Original Code is
 * Netscape Communications Corporation.
 * Portions created by the Initial Developer are Copyright (C) 1998
 * the Initial Developer. All Rights Reserved.
 *
 * Contributor(s):
 *   Kin Blas <kin@netscape.com>
 *   Akkana Peck <akkana@netscape.com>
 *
 * Alternatively, the contents of this file may be used under the terms of
 * either of the GNU General Public License Version 2 or later (the "GPL"),
 * or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
 * in which case the provisions of the GPL or the LGPL are applicable instead
 * of those above. If you wish to allow use of your version of this file only
 * under the terms of either the GPL or the LGPL, and not to allow others to
 * use your version of this file under the terms of the MPL, indicate your
 * decision by deleting the provisions above and replace them with the notice
 * and other provisions required by the GPL or the LGPL. If you do not delete
 * the provisions above, a recipient may use your version of this file under
 * the terms of any one of the MPL, the GPL or the LGPL.
 *
 * ***** END LICENSE BLOCK ***** */

var gReplaceDialog;      // Quick access to document/form elements.
var gFindInst;           // nsIWebBrowserFind that we're going to use
var gFindService;        // Global service which remembers find params
var gEditor;             // the editor we're using

function initDialogObject()
{
  // Create gReplaceDialog object and initialize.
  gReplaceDialog = {};
  gReplaceDialog.findInput       = document.getElementById("dialog.findInput");
  gReplaceDialog.replaceInput    = document.getElementById("dialog.replaceInput");
  gReplaceDialog.caseSensitive   = document.getElementById("dialog.caseSensitive");
  gReplaceDialog.wrap            = document.getElementById("dialog.wrap");
  gReplaceDialog.searchBackwards = document.getElementById("dialog.searchBackwards");
  gReplaceDialog.findNext        = document.getElementById("findNext");
  gReplaceDialog.replace         = document.getElementById("replace");
  gReplaceDialog.replaceAndFind  = document.getElementById("replaceAndFind");
  gReplaceDialog.replaceAll      = document.getElementById("replaceAll");
}

function loadDialog()
{
  // Set initial dialog field contents.
  // Set initial dialog field contents. Use the gFindInst attributes first,
  // this is necessary for window.find()
  gReplaceDialog.findInput.value         = (gFindInst.searchString
                                            ? gFindInst.searchString
                                            : gFindService.searchString);
  gReplaceDialog.replaceInput.value = gFindService.replaceString;
  gReplaceDialog.caseSensitive.checked   = (gFindInst.matchCase
                                            ? gFindInst.matchCase
                                            : gFindService.matchCase);
  gReplaceDialog.wrap.checked            = (gFindInst.wrapFind
                                            ? gFindInst.wrapFind
                                            : gFindService.wrapFind);
  gReplaceDialog.searchBackwards.checked = (gFindInst.findBackwards
                                            ? gFindInst.findBackwards
                                            : gFindService.findBackwards);

  doEnabling();
}

function onLoad()
{
  // Get the xul <editor> element:
  var editorElement = window.arguments[0];

  // If we don't get the editor, then we won't allow replacing.
  gEditor = editorElement.getEditor(editorElement.contentWindow);
  if (!gEditor)
  {
    window.close();
    return;
  }

  // Get the nsIWebBrowserFind service:
  gFindInst = editorElement.webBrowserFind;

  try {
  // get the find service, which stores global find state
    gFindService = Components.classes["@mozilla.org/find/find_service;1"]
                         .getService(Components.interfaces.nsIFindService);
  } catch(e) { dump("No find service!\n"); gFindService = 0; }

  // Init gReplaceDialog.
  initDialogObject();

  // Change "OK" to "Find".
  //dialog.find.label = document.getElementById("fBLT").getAttribute("label");

  // Fill dialog.
  loadDialog();

  if (gReplaceDialog.findInput.value)
    gReplaceDialog.findInput.select();
  else
    gReplaceDialog.findInput.focus();
}

function onUnload() {
  // Disconnect context from this dialog.
  gFindReplaceData.replaceDialog = null;
}

function saveFindData()
{
  // Set data attributes per user input.
  if (gFindService)
  {
    gFindService.searchString  = gReplaceDialog.findInput.value;
    gFindService.matchCase     = gReplaceDialog.caseSensitive.checked;
    gFindService.wrapFind      = gReplaceDialog.wrap.checked;
    gFindService.findBackwards = gReplaceDialog.searchBackwards.checked;
  }
}

function setUpFindInst()
{
  gFindInst.searchString  = gReplaceDialog.findInput.value;
  gFindInst.matchCase     = gReplaceDialog.caseSensitive.checked;
  gFindInst.wrapFind      = gReplaceDialog.wrap.checked;
  gFindInst.findBackwards = gReplaceDialog.searchBackwards.checked;
}

function onFindNext()
{
  // Transfer dialog contents to the find service.
  saveFindData();
  // set up the find instance
  setUpFindInst();

  // Search.
  var result = gFindInst.findNext();

  if (!result)
  {
    var bundle = document.getElementById("findBundle");
    AlertWithTitle(null, bundle.getString("notFoundWarning"));
    SetTextboxFocus(gReplaceDialog.findInput);
    gReplaceDialog.findInput.select();
    gReplaceDialog.findInput.focus();
    return false;
  } 
  return true;
}

function onReplace()
{
  if (!gEditor)
    return false;

  // Does the current selection match the find string?
  var selection = gEditor.selection;

  var selStr = selection.toString();
  var specStr = gReplaceDialog.findInput.value;
  if (!gReplaceDialog.caseSensitive.checked)
  {
    selStr = selStr.toLowerCase();
    specStr = specStr.toLowerCase();
  }
  // Unfortunately, because of whitespace we can't just check
  // whether (selStr == specStr), but have to loop ourselves.
  // N chars of whitespace in specStr can match any M >= N in selStr.
  var matches = true;
  var specLen = specStr.length;
  var selLen = selStr.length;
  if (selLen < specLen)
    matches = false;
  else
  {
    var specArray = specStr.match(/\S+|\s+/g);
    var selArray = selStr.match(/\S+|\s+/g);
    if ( specArray.length != selArray.length)
      matches = false;
    else
    {
      for (var i=0; i<selArray.length; i++)
      {
        if (selArray[i] != specArray[i])
        {
          if ( /\S/.test(selArray[i][0]) || /\S/.test(specArray[i][0]) )
          {
            // not a space chunk -- match fails
            matches = false;
            break;
          }
          else if ( selArray[i].length < specArray[i].length )
          {
            // if it's a space chunk then we only care that sel be
            // at least as long as spec
            matches = false;
            break;
          }
        }
      }
    }
  }

  // If the current selection doesn't match the pattern,
  // then we want to find the next match, but not do the replace.
  // That's what most other apps seem to do.
  // So here, just return.
  if (!matches)
    return false;

  // Transfer dialog contents to the find service.
  saveFindData();

  // For reverse finds, need to remember the caret position
  // before current selection
  var newRange;
  if (gReplaceDialog.searchBackwards.checked && selection.rangeCount > 0)
  {
    newRange = selection.getRangeAt(0).cloneRange();
    newRange.collapse(true);
  }

  // nsPlaintextEditor::InsertText fails if the string is empty,
  // so make that a special case:
  var replStr = gReplaceDialog.replaceInput.value;
  if (replStr == "")
    gEditor.deleteSelection(0);
  else
    gEditor.insertText(replStr);

  // For reverse finds, need to move caret just before the replaced text
  if (gReplaceDialog.searchBackwards.checked && newRange)
  {
    gEditor.selection.removeAllRanges();
    gEditor.selection.addRange(newRange);
  }

  return true;
}

function onReplaceAll()
{
  if (!gEditor)
    return;

  var findStr = gReplaceDialog.findInput.value;
  var repStr = gReplaceDialog.replaceInput.value;

  // Transfer dialog contents to the find service.
  saveFindData();

  var finder = Components.classes["@mozilla.org/embedcomp/rangefind;1"].createInstance().QueryInterface(Components.interfaces.nsIFind);

  finder.caseSensitive = gReplaceDialog.caseSensitive.checked;
  finder.findBackwards = gReplaceDialog.searchBackwards.checked;

  // We want the whole operation to be undoable in one swell foop,
  // so start a transaction:
  gEditor.beginTransaction();

  // and to make sure we close the transaction, guard against exceptions:
  try {
    // Make a range containing the current selection, 
    // so we don't go past it when we wrap.
    var selection = gEditor.selection;
    var selecRange;
    if (selection.rangeCount > 0)
      selecRange = selection.getRangeAt(0);
    var origRange = selecRange.cloneRange();

    // We'll need a range for the whole document:
    var wholeDocRange = gEditor.document.createRange();
    var rootNode = gEditor.rootElement.QueryInterface(Components.interfaces.nsIDOMNode);
    wholeDocRange.selectNodeContents(rootNode);

    // And start and end points:
    var endPt = gEditor.document.createRange();

    if (gReplaceDialog.searchBackwards.checked)
    {
      endPt.setStart(wholeDocRange.startContainer, wholeDocRange.startOffset);
      endPt.setEnd(wholeDocRange.startContainer, wholeDocRange.startOffset);
    }
    else
    {
      endPt.setStart(wholeDocRange.endContainer, wholeDocRange.endOffset);
      endPt.setEnd(wholeDocRange.endContainer, wholeDocRange.endOffset);
    }

    // Find and replace from here to end (start) of document:
    var foundRange;
    var searchRange = wholeDocRange.cloneRange();
    while ((foundRange = finder.Find(findStr, searchRange,
                                     selecRange, endPt)) != null)
    {
      gEditor.selection.removeAllRanges();
      gEditor.selection.addRange(foundRange);

      // The editor will leave the caret at the end of the replaced text.
      // For reverse finds, we need it at the beginning,
      // so save the next position now.
      if (gReplaceDialog.searchBackwards.checked)
      {
        selecRange = foundRange.cloneRange();
        selecRange.setEnd(selecRange.startContainer, selecRange.startOffset);
      }

      // nsPlaintextEditor::InsertText fails if the string is empty,
      // so make that a special case:
      if (repStr == "")
        gEditor.deleteSelection(0);
      else
        gEditor.insertText(repStr);

      // If we're going forward, we didn't save selecRange before, so do it now:
      if (!gReplaceDialog.searchBackwards.checked)
      {
        selection = gEditor.selection;
        if (selection.rangeCount <= 0) {
          gEditor.endTransaction();
          return;
        }
        selecRange = selection.getRangeAt(0).cloneRange();
      }
    }

    // If no wrapping, then we're done
    if (!gReplaceDialog.wrap.checked) {
      gEditor.endTransaction();
      return;
    }

    // If wrapping, find from start/end of document back to start point.
    if (gReplaceDialog.searchBackwards.checked)
    {
      // Collapse origRange to end
      origRange.setStart(origRange.endContainer, origRange.endOffset);
      // Set current position to document end
      selecRange.setEnd(wholeDocRange.endContainer, wholeDocRange.endOffset);
      selecRange.setStart(wholeDocRange.endContainer, wholeDocRange.endOffset);
    }
    else
    {
      // Collapse origRange to start
      origRange.setEnd(origRange.startContainer, origRange.startOffset);
      // Set current position to document start
      selecRange.setStart(wholeDocRange.startContainer,
                          wholeDocRange.startOffset);
      selecRange.setEnd(wholeDocRange.startContainer, wholeDocRange.startOffset);
    }

    while ((foundRange = finder.Find(findStr, wholeDocRange,
                                     selecRange, origRange)) != null)
    {
      gEditor.selection.removeAllRanges();
      gEditor.selection.addRange(foundRange);

      // Save insert point for backward case
      if (gReplaceDialog.searchBackwards.checked)
      {
        selecRange = foundRange.cloneRange();
        selecRange.setEnd(selecRange.startContainer, selecRange.startOffset);
      }

      // nsPlaintextEditor::InsertText fails if the string is empty,
      // so make that a special case:
      if (repStr == "")
        gEditor.deleteSelection(0);
      else
        gEditor.insertText(repStr);

      // Get insert point for forward case
      if (!gReplaceDialog.searchBackwards.checked)
      {
        selection = gEditor.selection;
        if (selection.rangeCount <= 0) {
          gEditor.endTransaction();
          return;
        }
        selecRange = selection.getRangeAt(0);
      }
    }
  } // end try
  catch (e) { }

  gEditor.endTransaction();
}

function doEnabling()
{
  var findStr = gReplaceDialog.findInput.value;
  var repStr = gReplaceDialog.replaceInput.value;
  gReplaceDialog.enabled = findStr;
  gReplaceDialog.findNext.disabled = !findStr;
  gReplaceDialog.replace.disabled = !findStr;
  gReplaceDialog.replaceAndFind.disabled = !findStr;
  gReplaceDialog.replaceAll.disabled = !findStr;
}