/* -*- Mode: C; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*- * * ***** BEGIN LICENSE BLOCK ***** * Version: MPL 1.1/GPL 2.0/LGPL 2.1 * * The contents of this file are subject to the Mozilla Public License Version * 1.1 (the "License"); you may not use this file except in compliance with * the License. You may obtain a copy of the License at * http://www.mozilla.org/MPL/ * * Software distributed under the License is distributed on an "AS IS" basis, * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License * for the specific language governing rights and limitations under the * License. * * The Original Code is Mozilla Communicator client code, released * March 31, 1998. * * The Initial Developer of the Original Code is * Netscape Communications Corporation. * Portions created by the Initial Developer are Copyright (C) 1998 * the Initial Developer. All Rights Reserved. * * Contributor(s): * * Alternatively, the contents of this file may be used under the terms of * either of the GNU General Public License Version 2 or later (the "GPL"), * or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), * in which case the provisions of the GPL or the LGPL are applicable instead * of those above. If you wish to allow use of your version of this file only * under the terms of either the GPL or the LGPL, and not to allow others to * use your version of this file under the terms of the MPL, indicate your * decision by deleting the provisions above and replace them with the notice * and other provisions required by the GPL or the LGPL. If you do not delete * the provisions above, a recipient may use your version of this file under * the terms of any one of the MPL, the GPL or the LGPL. * * ***** END LICENSE BLOCK ***** */ /* * Portable double to alphanumeric string and back converters. */ #include "jsstddef.h" #include "jslibmath.h" #include "jstypes.h" #include "jsdtoa.h" #include "jsprf.h" #include "jsutil.h" /* Added by JSIFY */ #include "jspubtd.h" #include "jsnum.h" #ifdef JS_THREADSAFE #include "prlock.h" #endif /**************************************************************** * * The author of this software is David M. Gay. * * Copyright (c) 1991 by Lucent Technologies. * * Permission to use, copy, modify, and distribute this software for any * purpose without fee is hereby granted, provided that this entire notice * is included in all copies of any software which is or includes a copy * or modification of this software and in all copies of the supporting * documentation for such software. * * THIS SOFTWARE IS BEING PROVIDED "AS IS", WITHOUT ANY EXPRESS OR IMPLIED * WARRANTY. IN PARTICULAR, NEITHER THE AUTHOR NOR LUCENT MAKES ANY * REPRESENTATION OR WARRANTY OF ANY KIND CONCERNING THE MERCHANTABILITY * OF THIS SOFTWARE OR ITS FITNESS FOR ANY PARTICULAR PURPOSE. * ***************************************************************/ /* Please send bug reports to David M. Gay Bell Laboratories, Room 2C-463 600 Mountain Avenue Murray Hill, NJ 07974-0636 U.S.A. dmg@bell-labs.com */ /* On a machine with IEEE extended-precision registers, it is * necessary to specify double-precision (53-bit) rounding precision * before invoking strtod or dtoa. If the machine uses (the equivalent * of) Intel 80x87 arithmetic, the call * _control87(PC_53, MCW_PC); * does this with many compilers. Whether this or another call is * appropriate depends on the compiler; for this to work, it may be * necessary to #include "float.h" or another system-dependent header * file. */ /* strtod for IEEE-arithmetic machines. * * This strtod returns a nearest machine number to the input decimal * string (or sets err to JS_DTOA_ERANGE or JS_DTOA_ENOMEM). With IEEE * arithmetic, ties are broken by the IEEE round-even rule. Otherwise * ties are broken by biased rounding (add half and chop). * * Inspired loosely by William D. Clinger's paper "How to Read Floating * Point Numbers Accurately" [Proc. ACM SIGPLAN '90, pp. 92-101]. * * Modifications: * * 1. We only require IEEE double-precision * arithmetic (not IEEE double-extended). * 2. We get by with floating-point arithmetic in a case that * Clinger missed -- when we're computing d * 10^n * for a small integer d and the integer n is not too * much larger than 22 (the maximum integer k for which * we can represent 10^k exactly), we may be able to * compute (d*10^k) * 10^(e-k) with just one roundoff. * 3. Rather than a bit-at-a-time adjustment of the binary * result in the hard case, we use floating-point * arithmetic to determine the adjustment to within * one bit; only in really hard cases do we need to * compute a second residual. * 4. Because of 3., we don't need a large table of powers of 10 * for ten-to-e (just some small tables, e.g. of 10^k * for 0 <= k <= 22). */ /* * #define IEEE_8087 for IEEE-arithmetic machines where the least * significant byte has the lowest address. * #define IEEE_MC68k for IEEE-arithmetic machines where the most * significant byte has the lowest address. * #define Long int on machines with 32-bit ints and 64-bit longs. * #define Sudden_Underflow for IEEE-format machines without gradual * underflow (i.e., that flush to zero on underflow). * #define No_leftright to omit left-right logic in fast floating-point * computation of js_dtoa. * #define Check_FLT_ROUNDS if FLT_ROUNDS can assume the values 2 or 3. * #define RND_PRODQUOT to use rnd_prod and rnd_quot (assembly routines * that use extended-precision instructions to compute rounded * products and quotients) with IBM. * #define ROUND_BIASED for IEEE-format with biased rounding. * #define Inaccurate_Divide for IEEE-format with correctly rounded * products but inaccurate quotients, e.g., for Intel i860. * #define JS_HAVE_LONG_LONG on machines that have a "long long" * integer type (of >= 64 bits). If long long is available and the name is * something other than "long long", #define Llong to be the name, * and if "unsigned Llong" does not work as an unsigned version of * Llong, #define #ULLong to be the corresponding unsigned type. * #define Bad_float_h if your system lacks a float.h or if it does not * define some or all of DBL_DIG, DBL_MAX_10_EXP, DBL_MAX_EXP, * FLT_RADIX, FLT_ROUNDS, and DBL_MAX. * #define MALLOC your_malloc, where your_malloc(n) acts like malloc(n) * if memory is available and otherwise does something you deem * appropriate. If MALLOC is undefined, malloc will be invoked * directly -- and assumed always to succeed. Similarly, if you * want something other than the system's free() to be called to * recycle memory acquired from MALLOC, #define FREE to be the * name of the alternate routine. (FREE or free is only called in * pathological cases, e.g., in a dtoa call after a dtoa return in * mode 3 with thousands of digits requested.) * #define Omit_Private_Memory to omit logic (added Jan. 1998) for making * memory allocations from a private pool of memory when possible. * When used, the private pool is PRIVATE_MEM bytes long: 2000 bytes, * unless #defined to be a different length. This default length * suffices to get rid of MALLOC calls except for unusual cases, * such as decimal-to-binary conversion of a very long string of * digits. * #define INFNAN_CHECK on IEEE systems to cause strtod to check for * Infinity and NaN (case insensitively). On some systems (e.g., * some HP systems), it may be necessary to #define NAN_WORD0 * appropriately -- to the most significant word of a quiet NaN. * (On HP Series 700/800 machines, -DNAN_WORD0=0x7ff40000 works.) * #define MULTIPLE_THREADS if the system offers preemptively scheduled * multiple threads. In this case, you must provide (or suitably * #define) two locks, acquired by ACQUIRE_DTOA_LOCK() and released * by RELEASE_DTOA_LOCK(). (The second lock, accessed * in pow5mult, ensures lazy evaluation of only one copy of high * powers of 5; omitting this lock would introduce a small * probability of wasting memory, but would otherwise be harmless.) * You must also invoke freedtoa(s) to free the value s returned by * dtoa. You may do so whether or not MULTIPLE_THREADS is #defined. * #define NO_IEEE_Scale to disable new (Feb. 1997) logic in strtod that * avoids underflows on inputs whose result does not underflow. */ #ifdef IS_LITTLE_ENDIAN #define IEEE_8087 #else #define IEEE_MC68k #endif #ifndef Long #define Long int32 #endif #ifndef ULong #define ULong uint32 #endif #define Bug(errorMessageString) JS_ASSERT(!errorMessageString) #include "stdlib.h" #include "string.h" #ifdef MALLOC extern void *MALLOC(size_t); #else #define MALLOC malloc #endif #define Omit_Private_Memory /* Private memory currently doesn't work with JS_THREADSAFE */ #ifndef Omit_Private_Memory #ifndef PRIVATE_MEM #define PRIVATE_MEM 2000 #endif #define PRIVATE_mem ((PRIVATE_MEM+sizeof(double)-1)/sizeof(double)) static double private_mem[PRIVATE_mem], *pmem_next = private_mem; #endif #ifdef Bad_float_h #undef __STDC__ #define DBL_DIG 15 #define DBL_MAX_10_EXP 308 #define DBL_MAX_EXP 1024 #define FLT_RADIX 2 #define FLT_ROUNDS 1 #define DBL_MAX 1.7976931348623157e+308 #ifndef LONG_MAX #define LONG_MAX 2147483647 #endif #else /* ifndef Bad_float_h */ #include "float.h" #endif /* Bad_float_h */ #ifndef __MATH_H__ #include "math.h" #endif #ifndef CONST #define CONST const #endif #if defined(IEEE_8087) + defined(IEEE_MC68k) != 1 Exactly one of IEEE_8087 or IEEE_MC68k should be defined. #endif #define word0(x) JSDOUBLE_HI32(x) #define set_word0(x, y) JSDOUBLE_SET_HI32(x, y) #define word1(x) JSDOUBLE_LO32(x) #define set_word1(x, y) JSDOUBLE_SET_LO32(x, y) #define Storeinc(a,b,c) (*(a)++ = (b) << 16 | (c) & 0xffff) /* #define P DBL_MANT_DIG */ /* Ten_pmax = floor(P*log(2)/log(5)) */ /* Bletch = (highest power of 2 < DBL_MAX_10_EXP) / 16 */ /* Quick_max = floor((P-1)*log(FLT_RADIX)/log(10) - 1) */ /* Int_max = floor(P*log(FLT_RADIX)/log(10) - 1) */ #define Exp_shift 20 #define Exp_shift1 20 #define Exp_msk1 0x100000 #define Exp_msk11 0x100000 #define Exp_mask 0x7ff00000 #define P 53 #define Bias 1023 #define Emin (-1022) #define Exp_1 0x3ff00000 #define Exp_11 0x3ff00000 #define Ebits 11 #define Frac_mask 0xfffff #define Frac_mask1 0xfffff #define Ten_pmax 22 #define Bletch 0x10 #define Bndry_mask 0xfffff #define Bndry_mask1 0xfffff #define LSB 1 #define Sign_bit 0x80000000 #define Log2P 1 #define Tiny0 0 #define Tiny1 1 #define Quick_max 14 #define Int_max 14 #define Infinite(x) (word0(x) == 0x7ff00000) /* sufficient test for here */ #ifndef NO_IEEE_Scale #define Avoid_Underflow #endif #ifdef RND_PRODQUOT #define rounded_product(a,b) a = rnd_prod(a, b) #define rounded_quotient(a,b) a = rnd_quot(a, b) extern double rnd_prod(double, double), rnd_quot(double, double); #else #define rounded_product(a,b) a *= b #define rounded_quotient(a,b) a /= b #endif #define Big0 (Frac_mask1 | Exp_msk1*(DBL_MAX_EXP+Bias-1)) #define Big1 0xffffffff #ifndef JS_HAVE_LONG_LONG #undef ULLong #else /* long long available */ #ifndef Llong #define Llong JSInt64 #endif #ifndef ULLong #define ULLong JSUint64 #endif #endif /* JS_HAVE_LONG_LONG */ #ifdef JS_THREADSAFE #define MULTIPLE_THREADS static PRLock *freelist_lock; #define ACQUIRE_DTOA_LOCK() \ JS_BEGIN_MACRO \ if (!initialized) \ InitDtoa(); \ PR_Lock(freelist_lock); \ JS_END_MACRO #define RELEASE_DTOA_LOCK() PR_Unlock(freelist_lock) #else #undef MULTIPLE_THREADS #define ACQUIRE_DTOA_LOCK() /*nothing*/ #define RELEASE_DTOA_LOCK() /*nothing*/ #endif #define Kmax 7 struct Bigint { struct Bigint *next; /* Free list link */ int32 k; /* lg2(maxwds) */ int32 maxwds; /* Number of words allocated for x */ int32 sign; /* Zero if positive, 1 if negative. Ignored by most Bigint routines! */ int32 wds; /* Actual number of words. If value is nonzero, the most significant word must be nonzero. */ ULong x[1]; /* wds words of number in little endian order */ }; #ifdef ENABLE_OOM_TESTING /* Out-of-memory testing. Use a good testcase (over and over) and then use * these routines to cause a memory failure on every possible Balloc allocation, * to make sure that all out-of-memory paths can be followed. See bug 14044. */ static int allocationNum; /* which allocation is next? */ static int desiredFailure; /* which allocation should fail? */ /** * js_BigintTestingReset * * Call at the beginning of a test run to set the allocation failure position. * (Set to 0 to just have the engine count allocations without failing.) */ JS_PUBLIC_API(void) js_BigintTestingReset(int newFailure) { allocationNum = 0; desiredFailure = newFailure; } /** * js_BigintTestingWhere * * Report the current allocation position. This is really only useful when you * want to learn how many allocations a test run has. */ JS_PUBLIC_API(int) js_BigintTestingWhere() { return allocationNum; } /* * So here's what you do: Set up a fantastic test case that exercises the * elements of the code you wish. Set the failure point at 0 and run the test, * then get the allocation position. This number is the number of allocations * your test makes. Now loop from 1 to that number, setting the failure point * at each loop count, and run the test over and over, causing failures at each * step. Any memory failure *should* cause a Out-Of-Memory exception; if it * doesn't, then there's still an error here. */ #endif typedef struct Bigint Bigint; static Bigint *freelist[Kmax+1]; /* * Allocate a Bigint with 2^k words. * This is not threadsafe. The caller must use thread locks */ static Bigint *Balloc(int32 k) { int32 x; Bigint *rv; #ifndef Omit_Private_Memory uint32 len; #endif #ifdef ENABLE_OOM_TESTING if (++allocationNum == desiredFailure) { printf("Forced Failing Allocation number %d\n", allocationNum); return NULL; } #endif if (k <= Kmax && (rv = freelist[k])) freelist[k] = rv->next; else { x = 1 << k; #ifdef Omit_Private_Memory rv = (Bigint *)MALLOC(sizeof(Bigint) + (x-1)*sizeof(ULong)); #else len = (sizeof(Bigint) + (x-1)*sizeof(ULong) + sizeof(double) - 1) /sizeof(double); if (k <= Kmax && pmem_next - private_mem + len <= PRIVATE_mem) { rv = (Bigint*)pmem_next; pmem_next += len; } else rv = (Bigint*)MALLOC(len*sizeof(double)); #endif if (!rv) return NULL; rv->k = k; rv->maxwds = x; } rv->sign = rv->wds = 0; return rv; } static void Bfree(Bigint *v) { if (v) { if (v->k > Kmax) #ifdef FREE FREE((void*)v); #else free((void*)v); #endif else { v->next = freelist[v->k]; freelist[v->k] = v; } } } #define Bcopy(x,y) memcpy((char *)&x->sign, (char *)&y->sign, \ y->wds*sizeof(Long) + 2*sizeof(int32)) /* Return b*m + a. Deallocate the old b. Both a and m must be between 0 and * 65535 inclusive. NOTE: old b is deallocated on memory failure. */ static Bigint *multadd(Bigint *b, int32 m, int32 a) { int32 i, wds; #ifdef ULLong ULong *x; ULLong carry, y; #else ULong carry, *x, y; ULong xi, z; #endif Bigint *b1; #ifdef ENABLE_OOM_TESTING if (++allocationNum == desiredFailure) { /* Faux allocation, because I'm not getting all of the failure paths * without it. */ printf("Forced Failing Allocation number %d\n", allocationNum); Bfree(b); return NULL; } #endif wds = b->wds; x = b->x; i = 0; carry = a; do { #ifdef ULLong y = *x * (ULLong)m + carry; carry = y >> 32; *x++ = (ULong)(y & 0xffffffffUL); #else xi = *x; y = (xi & 0xffff) * m + carry; z = (xi >> 16) * m + (y >> 16); carry = z >> 16; *x++ = (z << 16) + (y & 0xffff); #endif } while(++i < wds); if (carry) { if (wds >= b->maxwds) { b1 = Balloc(b->k+1); if (!b1) { Bfree(b); return NULL; } Bcopy(b1, b); Bfree(b); b = b1; } b->x[wds++] = (ULong)carry; b->wds = wds; } return b; } static Bigint *s2b(CONST char *s, int32 nd0, int32 nd, ULong y9) { Bigint *b; int32 i, k; Long x, y; x = (nd + 8) / 9; for(k = 0, y = 1; x > y; y <<= 1, k++) ; b = Balloc(k); if (!b) return NULL; b->x[0] = y9; b->wds = 1; i = 9; if (9 < nd0) { s += 9; do { b = multadd(b, 10, *s++ - '0'); if (!b) return NULL; } while(++i < nd0); s++; } else s += 10; for(; i < nd; i++) { b = multadd(b, 10, *s++ - '0'); if (!b) return NULL; } return b; } /* Return the number (0 through 32) of most significant zero bits in x. */ static int32 hi0bits(register ULong x) { register int32 k = 0; if (!(x & 0xffff0000)) { k = 16; x <<= 16; } if (!(x & 0xff000000)) { k += 8; x <<= 8; } if (!(x & 0xf0000000)) { k += 4; x <<= 4; } if (!(x & 0xc0000000)) { k += 2; x <<= 2; } if (!(x & 0x80000000)) { k++; if (!(x & 0x40000000)) return 32; } return k; } /* Return the number (0 through 32) of least significant zero bits in y. * Also shift y to the right past these 0 through 32 zeros so that y's * least significant bit will be set unless y was originally zero. */ static int32 lo0bits(ULong *y) { register int32 k; register ULong x = *y; if (x & 7) { if (x & 1) return 0; if (x & 2) { *y = x >> 1; return 1; } *y = x >> 2; return 2; } k = 0; if (!(x & 0xffff)) { k = 16; x >>= 16; } if (!(x & 0xff)) { k += 8; x >>= 8; } if (!(x & 0xf)) { k += 4; x >>= 4; } if (!(x & 0x3)) { k += 2; x >>= 2; } if (!(x & 1)) { k++; x >>= 1; if (!x & 1) return 32; } *y = x; return k; } /* Return a new Bigint with the given integer value, which must be nonnegative. */ static Bigint *i2b(int32 i) { Bigint *b; b = Balloc(1); if (!b) return NULL; b->x[0] = i; b->wds = 1; return b; } /* Return a newly allocated product of a and b. */ static Bigint *mult(CONST Bigint *a, CONST Bigint *b) { CONST Bigint *t; Bigint *c; int32 k, wa, wb, wc; ULong y; ULong *xc, *xc0, *xce; CONST ULong *x, *xa, *xae, *xb, *xbe; #ifdef ULLong ULLong carry, z; #else ULong carry, z; ULong z2; #endif if (a->wds < b->wds) { t = a; a = b; b = t; } k = a->k; wa = a->wds; wb = b->wds; wc = wa + wb; if (wc > a->maxwds) k++; c = Balloc(k); if (!c) return NULL; for(xc = c->x, xce = xc + wc; xc < xce; xc++) *xc = 0; xa = a->x; xae = xa + wa; xb = b->x; xbe = xb + wb; xc0 = c->x; #ifdef ULLong for(; xb < xbe; xc0++) { if ((y = *xb++) != 0) { x = xa; xc = xc0; carry = 0; do { z = *x++ * (ULLong)y + *xc + carry; carry = z >> 32; *xc++ = (ULong)(z & 0xffffffffUL); } while(x < xae); *xc = (ULong)carry; } } #else for(; xb < xbe; xb++, xc0++) { if ((y = *xb & 0xffff) != 0) { x = xa; xc = xc0; carry = 0; do { z = (*x & 0xffff) * y + (*xc & 0xffff) + carry; carry = z >> 16; z2 = (*x++ >> 16) * y + (*xc >> 16) + carry; carry = z2 >> 16; Storeinc(xc, z2, z); } while(x < xae); *xc = carry; } if ((y = *xb >> 16) != 0) { x = xa; xc = xc0; carry = 0; z2 = *xc; do { z = (*x & 0xffff) * y + (*xc >> 16) + carry; carry = z >> 16; Storeinc(xc, z, z2); z2 = (*x++ >> 16) * y + (*xc & 0xffff) + carry; carry = z2 >> 16; } while(x < xae); *xc = z2; } } #endif for(xc0 = c->x, xc = xc0 + wc; wc > 0 && !*--xc; --wc) ; c->wds = wc; return c; } /* * 'p5s' points to a linked list of Bigints that are powers of 5. * This list grows on demand, and it can only grow: it won't change * in any other way. So if we read 'p5s' or the 'next' field of * some Bigint on the list, and it is not NULL, we know it won't * change to NULL or some other value. Only when the value of * 'p5s' or 'next' is NULL do we need to acquire the lock and add * a new Bigint to the list. */ static Bigint *p5s; #ifdef JS_THREADSAFE static PRLock *p5s_lock; #endif /* Return b * 5^k. Deallocate the old b. k must be nonnegative. */ /* NOTE: old b is deallocated on memory failure. */ static Bigint *pow5mult(Bigint *b, int32 k) { Bigint *b1, *p5, *p51; int32 i; static CONST int32 p05[3] = { 5, 25, 125 }; if ((i = k & 3) != 0) { b = multadd(b, p05[i-1], 0); if (!b) return NULL; } if (!(k >>= 2)) return b; if (!(p5 = p5s)) { #ifdef JS_THREADSAFE /* * We take great care to not call i2b() and Bfree() * while holding the lock. */ Bigint *wasted_effort = NULL; p5 = i2b(625); if (!p5) { Bfree(b); return NULL; } /* lock and check again */ PR_Lock(p5s_lock); if (!p5s) { /* first time */ p5s = p5; p5->next = 0; } else { /* some other thread just beat us */ wasted_effort = p5; p5 = p5s; } PR_Unlock(p5s_lock); if (wasted_effort) { Bfree(wasted_effort); } #else /* first time */ p5 = p5s = i2b(625); if (!p5) { Bfree(b); return NULL; } p5->next = 0; #endif } for(;;) { if (k & 1) { b1 = mult(b, p5); Bfree(b); if (!b1) return NULL; b = b1; } if (!(k >>= 1)) break; if (!(p51 = p5->next)) { #ifdef JS_THREADSAFE Bigint *wasted_effort = NULL; p51 = mult(p5, p5); if (!p51) { Bfree(b); return NULL; } PR_Lock(p5s_lock); if (!p5->next) { p5->next = p51; p51->next = 0; } else { wasted_effort = p51; p51 = p5->next; } PR_Unlock(p5s_lock); if (wasted_effort) { Bfree(wasted_effort); } #else p51 = mult(p5,p5); if (!p51) { Bfree(b); return NULL; } p51->next = 0; p5->next = p51; #endif } p5 = p51; } return b; } /* Return b * 2^k. Deallocate the old b. k must be nonnegative. * NOTE: on memory failure, old b is deallocated. */ static Bigint *lshift(Bigint *b, int32 k) { int32 i, k1, n, n1; Bigint *b1; ULong *x, *x1, *xe, z; n = k >> 5; k1 = b->k; n1 = n + b->wds + 1; for(i = b->maxwds; n1 > i; i <<= 1) k1++; b1 = Balloc(k1); if (!b1) goto done; x1 = b1->x; for(i = 0; i < n; i++) *x1++ = 0; x = b->x; xe = x + b->wds; if (k &= 0x1f) { k1 = 32 - k; z = 0; do { *x1++ = *x << k | z; z = *x++ >> k1; } while(x < xe); if ((*x1 = z) != 0) ++n1; } else do *x1++ = *x++; while(x < xe); b1->wds = n1 - 1; done: Bfree(b); return b1; } /* Return -1, 0, or 1 depending on whether ab, respectively. */ static int32 cmp(Bigint *a, Bigint *b) { ULong *xa, *xa0, *xb, *xb0; int32 i, j; i = a->wds; j = b->wds; #ifdef DEBUG if (i > 1 && !a->x[i-1]) Bug("cmp called with a->x[a->wds-1] == 0"); if (j > 1 && !b->x[j-1]) Bug("cmp called with b->x[b->wds-1] == 0"); #endif if (i -= j) return i; xa0 = a->x; xa = xa0 + j; xb0 = b->x; xb = xb0 + j; for(;;) { if (*--xa != *--xb) return *xa < *xb ? -1 : 1; if (xa <= xa0) break; } return 0; } static Bigint *diff(Bigint *a, Bigint *b) { Bigint *c; int32 i, wa, wb; ULong *xa, *xae, *xb, *xbe, *xc; #ifdef ULLong ULLong borrow, y; #else ULong borrow, y; ULong z; #endif i = cmp(a,b); if (!i) { c = Balloc(0); if (!c) return NULL; c->wds = 1; c->x[0] = 0; return c; } if (i < 0) { c = a; a = b; b = c; i = 1; } else i = 0; c = Balloc(a->k); if (!c) return NULL; c->sign = i; wa = a->wds; xa = a->x; xae = xa + wa; wb = b->wds; xb = b->x; xbe = xb + wb; xc = c->x; borrow = 0; #ifdef ULLong do { y = (ULLong)*xa++ - *xb++ - borrow; borrow = y >> 32 & 1UL; *xc++ = (ULong)(y & 0xffffffffUL); } while(xb < xbe); while(xa < xae) { y = *xa++ - borrow; borrow = y >> 32 & 1UL; *xc++ = (ULong)(y & 0xffffffffUL); } #else do { y = (*xa & 0xffff) - (*xb & 0xffff) - borrow; borrow = (y & 0x10000) >> 16; z = (*xa++ >> 16) - (*xb++ >> 16) - borrow; borrow = (z & 0x10000) >> 16; Storeinc(xc, z, y); } while(xb < xbe); while(xa < xae) { y = (*xa & 0xffff) - borrow; borrow = (y & 0x10000) >> 16; z = (*xa++ >> 16) - borrow; borrow = (z & 0x10000) >> 16; Storeinc(xc, z, y); } #endif while(!*--xc) wa--; c->wds = wa; return c; } /* Return the absolute difference between x and the adjacent greater-magnitude double number (ignoring exponent overflows). */ static double ulp(double x) { register Long L; double a = 0; L = (word0(x) & Exp_mask) - (P-1)*Exp_msk1; #ifndef Sudden_Underflow if (L > 0) { #endif set_word0(a, L); set_word1(a, 0); #ifndef Sudden_Underflow } else { L = -L >> Exp_shift; if (L < Exp_shift) { set_word0(a, 0x80000 >> L); set_word1(a, 0); } else { set_word0(a, 0); L -= Exp_shift; set_word1(a, L >= 31 ? 1 : 1 << (31 - L)); } } #endif return a; } static double b2d(Bigint *a, int32 *e) { ULong *xa, *xa0, w, y, z; int32 k; double d = 0; #define d0 word0(d) #define d1 word1(d) #define set_d0(x) set_word0(d, x) #define set_d1(x) set_word1(d, x) xa0 = a->x; xa = xa0 + a->wds; y = *--xa; #ifdef DEBUG if (!y) Bug("zero y in b2d"); #endif k = hi0bits(y); *e = 32 - k; if (k < Ebits) { set_d0(Exp_1 | y >> (Ebits - k)); w = xa > xa0 ? *--xa : 0; set_d1(y << (32-Ebits + k) | w >> (Ebits - k)); goto ret_d; } z = xa > xa0 ? *--xa : 0; if (k -= Ebits) { set_d0(Exp_1 | y << k | z >> (32 - k)); y = xa > xa0 ? *--xa : 0; set_d1(z << k | y >> (32 - k)); } else { set_d0(Exp_1 | y); set_d1(z); } ret_d: #undef d0 #undef d1 #undef set_d0 #undef set_d1 return d; } /* Convert d into the form b*2^e, where b is an odd integer. b is the returned * Bigint and e is the returned binary exponent. Return the number of significant * bits in b in bits. d must be finite and nonzero. */ static Bigint *d2b(double d, int32 *e, int32 *bits) { Bigint *b; int32 de, i, k; ULong *x, y, z; #define d0 word0(d) #define d1 word1(d) #define set_d0(x) set_word0(d, x) #define set_d1(x) set_word1(d, x) b = Balloc(1); if (!b) return NULL; x = b->x; z = d0 & Frac_mask; set_d0(d0 & 0x7fffffff); /* clear sign bit, which we ignore */ #ifdef Sudden_Underflow de = (int32)(d0 >> Exp_shift); z |= Exp_msk11; #else if ((de = (int32)(d0 >> Exp_shift)) != 0) z |= Exp_msk1; #endif if ((y = d1) != 0) { if ((k = lo0bits(&y)) != 0) { x[0] = y | z << (32 - k); z >>= k; } else x[0] = y; i = b->wds = (x[1] = z) ? 2 : 1; } else { JS_ASSERT(z); k = lo0bits(&z); x[0] = z; i = b->wds = 1; k += 32; } #ifndef Sudden_Underflow if (de) { #endif *e = de - Bias - (P-1) + k; *bits = P - k; #ifndef Sudden_Underflow } else { *e = de - Bias - (P-1) + 1 + k; *bits = 32*i - hi0bits(x[i-1]); } #endif return b; } #undef d0 #undef d1 #undef set_d0 #undef set_d1 static double ratio(Bigint *a, Bigint *b) { double da, db; int32 k, ka, kb; da = b2d(a, &ka); db = b2d(b, &kb); k = ka - kb + 32*(a->wds - b->wds); if (k > 0) set_word0(da, word0(da) + k*Exp_msk1); else { k = -k; set_word0(db, word0(db) + k*Exp_msk1); } return da / db; } static CONST double tens[] = { 1e0, 1e1, 1e2, 1e3, 1e4, 1e5, 1e6, 1e7, 1e8, 1e9, 1e10, 1e11, 1e12, 1e13, 1e14, 1e15, 1e16, 1e17, 1e18, 1e19, 1e20, 1e21, 1e22 }; static CONST double bigtens[] = { 1e16, 1e32, 1e64, 1e128, 1e256 }; static CONST double tinytens[] = { 1e-16, 1e-32, 1e-64, 1e-128, #ifdef Avoid_Underflow 9007199254740992.e-256 #else 1e-256 #endif }; /* The factor of 2^53 in tinytens[4] helps us avoid setting the underflow */ /* flag unnecessarily. It leads to a song and dance at the end of strtod. */ #define Scale_Bit 0x10 #define n_bigtens 5 #ifdef INFNAN_CHECK #ifndef NAN_WORD0 #define NAN_WORD0 0x7ff80000 #endif #ifndef NAN_WORD1 #define NAN_WORD1 0 #endif static int match(CONST char **sp, char *t) { int c, d; CONST char *s = *sp; while(d = *t++) { if ((c = *++s) >= 'A' && c <= 'Z') c += 'a' - 'A'; if (c != d) return 0; } *sp = s + 1; return 1; } #endif /* INFNAN_CHECK */ #ifdef JS_THREADSAFE static JSBool initialized = JS_FALSE; /* hacked replica of nspr _PR_InitDtoa */ static void InitDtoa(void) { freelist_lock = PR_NewLock(); p5s_lock = PR_NewLock(); initialized = JS_TRUE; } #endif void js_FinishDtoa(void) { int count; Bigint *temp; #ifdef JS_THREADSAFE if (initialized == JS_TRUE) { PR_DestroyLock(freelist_lock); PR_DestroyLock(p5s_lock); initialized = JS_FALSE; } #endif /* clear down the freelist array and p5s */ /* static Bigint *freelist[Kmax+1]; */ for (count = 0; count <= Kmax; count++) { Bigint **listp = &freelist[count]; while ((temp = *listp) != NULL) { *listp = temp->next; free(temp); } freelist[count] = NULL; } /* static Bigint *p5s; */ while (p5s) { temp = p5s; p5s = p5s->next; free(temp); } } /* nspr2 watcom bug ifdef omitted */ JS_FRIEND_API(double) JS_strtod(CONST char *s00, char **se, int *err) { int32 scale; int32 bb2, bb5, bbe, bd2, bd5, bbbits, bs2, c, dsign, e, e1, esign, i, j, k, nd, nd0, nf, nz, nz0, sign; CONST char *s, *s0, *s1; double aadj, aadj1, adj, rv, rv0; Long L; ULong y, z; Bigint *bb, *bb1, *bd, *bd0, *bs, *delta; *err = 0; bb = bd = bs = delta = NULL; sign = nz0 = nz = 0; rv = 0.; /* Locking for Balloc's shared buffers that will be used in this block */ ACQUIRE_DTOA_LOCK(); for(s = s00;;s++) switch(*s) { case '-': sign = 1; /* no break */ case '+': if (*++s) goto break2; /* no break */ case 0: s = s00; goto ret; case '\t': case '\n': case '\v': case '\f': case '\r': case ' ': continue; default: goto break2; } break2: if (*s == '0') { nz0 = 1; while(*++s == '0') ; if (!*s) goto ret; } s0 = s; y = z = 0; for(nd = nf = 0; (c = *s) >= '0' && c <= '9'; nd++, s++) if (nd < 9) y = 10*y + c - '0'; else if (nd < 16) z = 10*z + c - '0'; nd0 = nd; if (c == '.') { c = *++s; if (!nd) { for(; c == '0'; c = *++s) nz++; if (c > '0' && c <= '9') { s0 = s; nf += nz; nz = 0; goto have_dig; } goto dig_done; } for(; c >= '0' && c <= '9'; c = *++s) { have_dig: nz++; if (c -= '0') { nf += nz; for(i = 1; i < nz; i++) if (nd++ < 9) y *= 10; else if (nd <= DBL_DIG + 1) z *= 10; if (nd++ < 9) y = 10*y + c; else if (nd <= DBL_DIG + 1) z = 10*z + c; nz = 0; } } } dig_done: e = 0; if (c == 'e' || c == 'E') { if (!nd && !nz && !nz0) { s = s00; goto ret; } s00 = s; esign = 0; switch(c = *++s) { case '-': esign = 1; case '+': c = *++s; } if (c >= '0' && c <= '9') { while(c == '0') c = *++s; if (c > '0' && c <= '9') { L = c - '0'; s1 = s; while((c = *++s) >= '0' && c <= '9') L = 10*L + c - '0'; if (s - s1 > 8 || L > 19999) /* Avoid confusion from exponents * so large that e might overflow. */ e = 19999; /* safe for 16 bit ints */ else e = (int32)L; if (esign) e = -e; } else e = 0; } else s = s00; } if (!nd) { if (!nz && !nz0) { #ifdef INFNAN_CHECK /* Check for Nan and Infinity */ switch(c) { case 'i': case 'I': if (match(&s,"nfinity")) { set_word0(rv, 0x7ff00000); set_word1(rv, 0); goto ret; } break; case 'n': case 'N': if (match(&s, "an")) { set_word0(rv, NAN_WORD0); set_word1(rv, NAN_WORD1); goto ret; } } #endif /* INFNAN_CHECK */ s = s00; } goto ret; } e1 = e -= nf; /* Now we have nd0 digits, starting at s0, followed by a * decimal point, followed by nd-nd0 digits. The number we're * after is the integer represented by those digits times * 10**e */ if (!nd0) nd0 = nd; k = nd < DBL_DIG + 1 ? nd : DBL_DIG + 1; rv = y; if (k > 9) rv = tens[k - 9] * rv + z; bd0 = 0; if (nd <= DBL_DIG #ifndef RND_PRODQUOT && FLT_ROUNDS == 1 #endif ) { if (!e) goto ret; if (e > 0) { if (e <= Ten_pmax) { /* rv = */ rounded_product(rv, tens[e]); goto ret; } i = DBL_DIG - nd; if (e <= Ten_pmax + i) { /* A fancier test would sometimes let us do * this for larger i values. */ e -= i; rv *= tens[i]; /* rv = */ rounded_product(rv, tens[e]); goto ret; } } #ifndef Inaccurate_Divide else if (e >= -Ten_pmax) { /* rv = */ rounded_quotient(rv, tens[-e]); goto ret; } #endif } e1 += nd - k; scale = 0; /* Get starting approximation = rv * 10**e1 */ if (e1 > 0) { if ((i = e1 & 15) != 0) rv *= tens[i]; if (e1 &= ~15) { if (e1 > DBL_MAX_10_EXP) { ovfl: *err = JS_DTOA_ERANGE; #ifdef __STDC__ rv = HUGE_VAL; #else /* Can't trust HUGE_VAL */ set_word0(rv, Exp_mask); set_word1(rv, 0); #endif if (bd0) goto retfree; goto ret; } e1 >>= 4; for(j = 0; e1 > 1; j++, e1 >>= 1) if (e1 & 1) rv *= bigtens[j]; /* The last multiplication could overflow. */ set_word0(rv, word0(rv) - P*Exp_msk1); rv *= bigtens[j]; if ((z = word0(rv) & Exp_mask) > Exp_msk1*(DBL_MAX_EXP+Bias-P)) goto ovfl; if (z > Exp_msk1*(DBL_MAX_EXP+Bias-1-P)) { /* set to largest number */ /* (Can't trust DBL_MAX) */ set_word0(rv, Big0); set_word1(rv, Big1); } else set_word0(rv, word0(rv) + P*Exp_msk1); } } else if (e1 < 0) { e1 = -e1; if ((i = e1 & 15) != 0) rv /= tens[i]; if (e1 &= ~15) { e1 >>= 4; if (e1 >= 1 << n_bigtens) goto undfl; #ifdef Avoid_Underflow if (e1 & Scale_Bit) scale = P; for(j = 0; e1 > 0; j++, e1 >>= 1) if (e1 & 1) rv *= tinytens[j]; if (scale && (j = P + 1 - ((word0(rv) & Exp_mask) >> Exp_shift)) > 0) { /* scaled rv is denormal; zap j low bits */ if (j >= 32) { set_word1(rv, 0); set_word0(rv, word0(rv) & (0xffffffff << (j-32))); if (!word0(rv)) set_word0(rv, 1); } else set_word1(rv, word1(rv) & (0xffffffff << j)); } #else for(j = 0; e1 > 1; j++, e1 >>= 1) if (e1 & 1) rv *= tinytens[j]; /* The last multiplication could underflow. */ rv0 = rv; rv *= tinytens[j]; if (!rv) { rv = 2.*rv0; rv *= tinytens[j]; #endif if (!rv) { undfl: rv = 0.; *err = JS_DTOA_ERANGE; if (bd0) goto retfree; goto ret; } #ifndef Avoid_Underflow set_word0(rv, Tiny0); set_word1(rv, Tiny1); /* The refinement below will clean * this approximation up. */ } #endif } } /* Now the hard part -- adjusting rv to the correct value.*/ /* Put digits into bd: true value = bd * 10^e */ bd0 = s2b(s0, nd0, nd, y); if (!bd0) goto nomem; for(;;) { bd = Balloc(bd0->k); if (!bd) goto nomem; Bcopy(bd, bd0); bb = d2b(rv, &bbe, &bbbits); /* rv = bb * 2^bbe */ if (!bb) goto nomem; bs = i2b(1); if (!bs) goto nomem; if (e >= 0) { bb2 = bb5 = 0; bd2 = bd5 = e; } else { bb2 = bb5 = -e; bd2 = bd5 = 0; } if (bbe >= 0) bb2 += bbe; else bd2 -= bbe; bs2 = bb2; #ifdef Sudden_Underflow j = P + 1 - bbbits; #else #ifdef Avoid_Underflow j = bbe - scale; #else j = bbe; #endif i = j + bbbits - 1; /* logb(rv) */ if (i < Emin) /* denormal */ j += P - Emin; else j = P + 1 - bbbits; #endif bb2 += j; bd2 += j; #ifdef Avoid_Underflow bd2 += scale; #endif i = bb2 < bd2 ? bb2 : bd2; if (i > bs2) i = bs2; if (i > 0) { bb2 -= i; bd2 -= i; bs2 -= i; } if (bb5 > 0) { bs = pow5mult(bs, bb5); if (!bs) goto nomem; bb1 = mult(bs, bb); if (!bb1) goto nomem; Bfree(bb); bb = bb1; } if (bb2 > 0) { bb = lshift(bb, bb2); if (!bb) goto nomem; } if (bd5 > 0) { bd = pow5mult(bd, bd5); if (!bd) goto nomem; } if (bd2 > 0) { bd = lshift(bd, bd2); if (!bd) goto nomem; } if (bs2 > 0) { bs = lshift(bs, bs2); if (!bs) goto nomem; } delta = diff(bb, bd); if (!delta) goto nomem; dsign = delta->sign; delta->sign = 0; i = cmp(delta, bs); if (i < 0) { /* Error is less than half an ulp -- check for * special case of mantissa a power of two. */ if (dsign || word1(rv) || word0(rv) & Bndry_mask #ifdef Avoid_Underflow || (word0(rv) & Exp_mask) <= Exp_msk1 + P*Exp_msk1 #else || (word0(rv) & Exp_mask) <= Exp_msk1 #endif ) { #ifdef Avoid_Underflow if (!delta->x[0] && delta->wds == 1) dsign = 2; #endif break; } delta = lshift(delta,Log2P); if (!delta) goto nomem; if (cmp(delta, bs) > 0) goto drop_down; break; } if (i == 0) { /* exactly half-way between */ if (dsign) { if ((word0(rv) & Bndry_mask1) == Bndry_mask1 && word1(rv) == 0xffffffff) { /*boundary case -- increment exponent*/ set_word0(rv, (word0(rv) & Exp_mask) + Exp_msk1); set_word1(rv, 0); #ifdef Avoid_Underflow dsign = 0; #endif break; } } else if (!(word0(rv) & Bndry_mask) && !word1(rv)) { #ifdef Avoid_Underflow dsign = 2; #endif drop_down: /* boundary case -- decrement exponent */ #ifdef Sudden_Underflow L = word0(rv) & Exp_mask; if (L <= Exp_msk1) goto undfl; L -= Exp_msk1; #else L = (word0(rv) & Exp_mask) - Exp_msk1; #endif set_word0(rv, L | Bndry_mask1); set_word1(rv, 0xffffffff); break; } #ifndef ROUND_BIASED if (!(word1(rv) & LSB)) break; #endif if (dsign) rv += ulp(rv); #ifndef ROUND_BIASED else { rv -= ulp(rv); #ifndef Sudden_Underflow if (!rv) goto undfl; #endif } #ifdef Avoid_Underflow dsign = 1 - dsign; #endif #endif break; } if ((aadj = ratio(delta, bs)) <= 2.) { if (dsign) aadj = aadj1 = 1.; else if (word1(rv) || word0(rv) & Bndry_mask) { #ifndef Sudden_Underflow if (word1(rv) == Tiny1 && !word0(rv)) goto undfl; #endif aadj = 1.; aadj1 = -1.; } else { /* special case -- power of FLT_RADIX to be */ /* rounded down... */ if (aadj < 2./FLT_RADIX) aadj = 1./FLT_RADIX; else aadj *= 0.5; aadj1 = -aadj; } } else { aadj *= 0.5; aadj1 = dsign ? aadj : -aadj; #ifdef Check_FLT_ROUNDS switch(FLT_ROUNDS) { case 2: /* towards +infinity */ aadj1 -= 0.5; break; case 0: /* towards 0 */ case 3: /* towards -infinity */ aadj1 += 0.5; } #else if (FLT_ROUNDS == 0) aadj1 += 0.5; #endif } y = word0(rv) & Exp_mask; /* Check for overflow */ if (y == Exp_msk1*(DBL_MAX_EXP+Bias-1)) { rv0 = rv; set_word0(rv, word0(rv) - P*Exp_msk1); adj = aadj1 * ulp(rv); rv += adj; if ((word0(rv) & Exp_mask) >= Exp_msk1*(DBL_MAX_EXP+Bias-P)) { if (word0(rv0) == Big0 && word1(rv0) == Big1) goto ovfl; set_word0(rv, Big0); set_word1(rv, Big1); goto cont; } else set_word0(rv, word0(rv) + P*Exp_msk1); } else { #ifdef Sudden_Underflow if ((word0(rv) & Exp_mask) <= P*Exp_msk1) { rv0 = rv; set_word0(rv, word0(rv) + P*Exp_msk1); adj = aadj1 * ulp(rv); rv += adj; if ((word0(rv) & Exp_mask) <= P*Exp_msk1) { if (word0(rv0) == Tiny0 && word1(rv0) == Tiny1) goto undfl; set_word0(rv, Tiny0); set_word1(rv, Tiny1); goto cont; } else set_word0(rv, word0(rv) - P*Exp_msk1); } else { adj = aadj1 * ulp(rv); rv += adj; } #else /* Compute adj so that the IEEE rounding rules will * correctly round rv + adj in some half-way cases. * If rv * ulp(rv) is denormalized (i.e., * y <= (P-1)*Exp_msk1), we must adjust aadj to avoid * trouble from bits lost to denormalization; * example: 1.2e-307 . */ #ifdef Avoid_Underflow if (y <= P*Exp_msk1 && aadj > 1.) #else if (y <= (P-1)*Exp_msk1 && aadj > 1.) #endif { aadj1 = (double)(int32)(aadj + 0.5); if (!dsign) aadj1 = -aadj1; } #ifdef Avoid_Underflow if (scale && y <= P*Exp_msk1) set_word0(aadj1, word0(aadj1) + (P+1)*Exp_msk1 - y); #endif adj = aadj1 * ulp(rv); rv += adj; #endif } z = word0(rv) & Exp_mask; #ifdef Avoid_Underflow if (!scale) #endif if (y == z) { /* Can we stop now? */ L = (Long)aadj; aadj -= L; /* The tolerances below are conservative. */ if (dsign || word1(rv) || word0(rv) & Bndry_mask) { if (aadj < .4999999 || aadj > .5000001) break; } else if (aadj < .4999999/FLT_RADIX) break; } cont: Bfree(bb); Bfree(bd); Bfree(bs); Bfree(delta); bb = bd = bs = delta = NULL; } #ifdef Avoid_Underflow if (scale) { rv0 = 0.; set_word0(rv0, Exp_1 - P*Exp_msk1); set_word1(rv0, 0); if ((word0(rv) & Exp_mask) <= P*Exp_msk1 && word1(rv) & 1 && dsign != 2) { if (dsign) { #ifdef Sudden_Underflow /* rv will be 0, but this would give the */ /* right result if only rv *= rv0 worked. */ set_word0(rv, word0(rv) + P*Exp_msk1); set_word0(rv0, Exp_1 - 2*P*Exp_msk1); #endif rv += ulp(rv); } else set_word1(rv, word1(rv) & ~1); } rv *= rv0; } #endif /* Avoid_Underflow */ retfree: Bfree(bb); Bfree(bd); Bfree(bs); Bfree(bd0); Bfree(delta); ret: RELEASE_DTOA_LOCK(); if (se) *se = (char *)s; return sign ? -rv : rv; nomem: Bfree(bb); Bfree(bd); Bfree(bs); Bfree(bd0); Bfree(delta); RELEASE_DTOA_LOCK(); *err = JS_DTOA_ENOMEM; return 0; } /* Return floor(b/2^k) and set b to be the remainder. The returned quotient must be less than 2^32. */ static uint32 quorem2(Bigint *b, int32 k) { ULong mask; ULong result; ULong *bx, *bxe; int32 w; int32 n = k >> 5; k &= 0x1F; mask = (1<wds - n; if (w <= 0) return 0; JS_ASSERT(w <= 2); bx = b->x; bxe = bx + n; result = *bxe >> k; *bxe &= mask; if (w == 2) { JS_ASSERT(!(bxe[1] & ~mask)); if (k) result |= bxe[1] << (32 - k); } n++; while (!*bxe && bxe != bx) { n--; bxe--; } b->wds = n; return result; } /* Return floor(b/S) and set b to be the remainder. As added restrictions, b must not have * more words than S, the most significant word of S must not start with a 1 bit, and the * returned quotient must be less than 36. */ static int32 quorem(Bigint *b, Bigint *S) { int32 n; ULong *bx, *bxe, q, *sx, *sxe; #ifdef ULLong ULLong borrow, carry, y, ys; #else ULong borrow, carry, y, ys; ULong si, z, zs; #endif n = S->wds; JS_ASSERT(b->wds <= n); if (b->wds < n) return 0; sx = S->x; sxe = sx + --n; bx = b->x; bxe = bx + n; JS_ASSERT(*sxe <= 0x7FFFFFFF); q = *bxe / (*sxe + 1); /* ensure q <= true quotient */ JS_ASSERT(q < 36); if (q) { borrow = 0; carry = 0; do { #ifdef ULLong ys = *sx++ * (ULLong)q + carry; carry = ys >> 32; y = *bx - (ys & 0xffffffffUL) - borrow; borrow = y >> 32 & 1UL; *bx++ = (ULong)(y & 0xffffffffUL); #else si = *sx++; ys = (si & 0xffff) * q + carry; zs = (si >> 16) * q + (ys >> 16); carry = zs >> 16; y = (*bx & 0xffff) - (ys & 0xffff) - borrow; borrow = (y & 0x10000) >> 16; z = (*bx >> 16) - (zs & 0xffff) - borrow; borrow = (z & 0x10000) >> 16; Storeinc(bx, z, y); #endif } while(sx <= sxe); if (!*bxe) { bx = b->x; while(--bxe > bx && !*bxe) --n; b->wds = n; } } if (cmp(b, S) >= 0) { q++; borrow = 0; carry = 0; bx = b->x; sx = S->x; do { #ifdef ULLong ys = *sx++ + carry; carry = ys >> 32; y = *bx - (ys & 0xffffffffUL) - borrow; borrow = y >> 32 & 1UL; *bx++ = (ULong)(y & 0xffffffffUL); #else si = *sx++; ys = (si & 0xffff) + carry; zs = (si >> 16) + (ys >> 16); carry = zs >> 16; y = (*bx & 0xffff) - (ys & 0xffff) - borrow; borrow = (y & 0x10000) >> 16; z = (*bx >> 16) - (zs & 0xffff) - borrow; borrow = (z & 0x10000) >> 16; Storeinc(bx, z, y); #endif } while(sx <= sxe); bx = b->x; bxe = bx + n; if (!*bxe) { while(--bxe > bx && !*bxe) --n; b->wds = n; } } return (int32)q; } /* dtoa for IEEE arithmetic (dmg): convert double to ASCII string. * * Inspired by "How to Print Floating-Point Numbers Accurately" by * Guy L. Steele, Jr. and Jon L. White [Proc. ACM SIGPLAN '90, pp. 92-101]. * * Modifications: * 1. Rather than iterating, we use a simple numeric overestimate * to determine k = floor(log10(d)). We scale relevant * quantities using O(log2(k)) rather than O(k) multiplications. * 2. For some modes > 2 (corresponding to ecvt and fcvt), we don't * try to generate digits strictly left to right. Instead, we * compute with fewer bits and propagate the carry if necessary * when rounding the final digit up. This is often faster. * 3. Under the assumption that input will be rounded nearest, * mode 0 renders 1e23 as 1e23 rather than 9.999999999999999e22. * That is, we allow equality in stopping tests when the * round-nearest rule will give the same floating-point value * as would satisfaction of the stopping test with strict * inequality. * 4. We remove common factors of powers of 2 from relevant * quantities. * 5. When converting floating-point integers less than 1e16, * we use floating-point arithmetic rather than resorting * to multiple-precision integers. * 6. When asked to produce fewer than 15 digits, we first try * to get by with floating-point arithmetic; we resort to * multiple-precision integer arithmetic only if we cannot * guarantee that the floating-point calculation has given * the correctly rounded result. For k requested digits and * "uniformly" distributed input, the probability is * something like 10^(k-15) that we must resort to the Long * calculation. */ /* Always emits at least one digit. */ /* If biasUp is set, then rounding in modes 2 and 3 will round away from zero * when the number is exactly halfway between two representable values. For example, * rounding 2.5 to zero digits after the decimal point will return 3 and not 2. * 2.49 will still round to 2, and 2.51 will still round to 3. */ /* bufsize should be at least 20 for modes 0 and 1. For the other modes, * bufsize should be two greater than the maximum number of output characters expected. */ static JSBool js_dtoa(double d, int mode, JSBool biasUp, int ndigits, int *decpt, int *sign, char **rve, char *buf, size_t bufsize) { /* Arguments ndigits, decpt, sign are similar to those of ecvt and fcvt; trailing zeros are suppressed from the returned string. If not null, *rve is set to point to the end of the return value. If d is +-Infinity or NaN, then *decpt is set to 9999. mode: 0 ==> shortest string that yields d when read in and rounded to nearest. 1 ==> like 0, but with Steele & White stopping rule; e.g. with IEEE P754 arithmetic , mode 0 gives 1e23 whereas mode 1 gives 9.999999999999999e22. 2 ==> max(1,ndigits) significant digits. This gives a return value similar to that of ecvt, except that trailing zeros are suppressed. 3 ==> through ndigits past the decimal point. This gives a return value similar to that from fcvt, except that trailing zeros are suppressed, and ndigits can be negative. 4-9 should give the same return values as 2-3, i.e., 4 <= mode <= 9 ==> same return as mode 2 + (mode & 1). These modes are mainly for debugging; often they run slower but sometimes faster than modes 2-3. 4,5,8,9 ==> left-to-right digit generation. 6-9 ==> don't try fast floating-point estimate (if applicable). Values of mode other than 0-9 are treated as mode 0. Sufficient space is allocated to the return value to hold the suppressed trailing zeros. */ int32 bbits, b2, b5, be, dig, i, ieps, ilim, ilim0, ilim1, j, j1, k, k0, k_check, leftright, m2, m5, s2, s5, spec_case, try_quick; Long L; #ifndef Sudden_Underflow int32 denorm; ULong x; #endif Bigint *b, *b1, *delta, *mlo, *mhi, *S; double d2, ds, eps; char *s; if (word0(d) & Sign_bit) { /* set sign for everything, including 0's and NaNs */ *sign = 1; set_word0(d, word0(d) & ~Sign_bit); /* clear sign bit */ } else *sign = 0; if ((word0(d) & Exp_mask) == Exp_mask) { /* Infinity or NaN */ *decpt = 9999; s = !word1(d) && !(word0(d) & Frac_mask) ? "Infinity" : "NaN"; if ((s[0] == 'I' && bufsize < 9) || (s[0] == 'N' && bufsize < 4)) { JS_ASSERT(JS_FALSE); /* JS_SetError(JS_BUFFER_OVERFLOW_ERROR, 0); */ return JS_FALSE; } strcpy(buf, s); if (rve) { *rve = buf[3] ? buf + 8 : buf + 3; JS_ASSERT(**rve == '\0'); } return JS_TRUE; } b = NULL; /* initialize for abort protection */ S = NULL; mlo = mhi = NULL; if (!d) { no_digits: *decpt = 1; if (bufsize < 2) { JS_ASSERT(JS_FALSE); /* JS_SetError(JS_BUFFER_OVERFLOW_ERROR, 0); */ return JS_FALSE; } buf[0] = '0'; buf[1] = '\0'; /* copy "0" to buffer */ if (rve) *rve = buf + 1; /* We might have jumped to "no_digits" from below, so we need * to be sure to free the potentially allocated Bigints to avoid * memory leaks. */ Bfree(b); Bfree(S); if (mlo != mhi) Bfree(mlo); Bfree(mhi); return JS_TRUE; } b = d2b(d, &be, &bbits); if (!b) goto nomem; #ifdef Sudden_Underflow i = (int32)(word0(d) >> Exp_shift1 & (Exp_mask>>Exp_shift1)); #else if ((i = (int32)(word0(d) >> Exp_shift1 & (Exp_mask>>Exp_shift1))) != 0) { #endif d2 = d; set_word0(d2, word0(d2) & Frac_mask1); set_word0(d2, word0(d2) | Exp_11); /* log(x) ~=~ log(1.5) + (x-1.5)/1.5 * log10(x) = log(x) / log(10) * ~=~ log(1.5)/log(10) + (x-1.5)/(1.5*log(10)) * log10(d) = (i-Bias)*log(2)/log(10) + log10(d2) * * This suggests computing an approximation k to log10(d) by * * k = (i - Bias)*0.301029995663981 * + ( (d2-1.5)*0.289529654602168 + 0.176091259055681 ); * * We want k to be too large rather than too small. * The error in the first-order Taylor series approximation * is in our favor, so we just round up the constant enough * to compensate for any error in the multiplication of * (i - Bias) by 0.301029995663981; since |i - Bias| <= 1077, * and 1077 * 0.30103 * 2^-52 ~=~ 7.2e-14, * adding 1e-13 to the constant term more than suffices. * Hence we adjust the constant term to 0.1760912590558. * (We could get a more accurate k by invoking log10, * but this is probably not worthwhile.) */ i -= Bias; #ifndef Sudden_Underflow denorm = 0; } else { /* d is denormalized */ i = bbits + be + (Bias + (P-1) - 1); x = i > 32 ? word0(d) << (64 - i) | word1(d) >> (i - 32) : word1(d) << (32 - i); d2 = x; set_word0(d2, word0(d2) - 31*Exp_msk1); /* adjust exponent */ i -= (Bias + (P-1) - 1) + 1; denorm = 1; } #endif /* At this point d = f*2^i, where 1 <= f < 2. d2 is an approximation of f. */ ds = (d2-1.5)*0.289529654602168 + 0.1760912590558 + i*0.301029995663981; k = (int32)ds; if (ds < 0. && ds != k) k--; /* want k = floor(ds) */ k_check = 1; if (k >= 0 && k <= Ten_pmax) { if (d < tens[k]) k--; k_check = 0; } /* At this point floor(log10(d)) <= k <= floor(log10(d))+1. If k_check is zero, we're guaranteed that k = floor(log10(d)). */ j = bbits - i - 1; /* At this point d = b/2^j, where b is an odd integer. */ if (j >= 0) { b2 = 0; s2 = j; } else { b2 = -j; s2 = 0; } if (k >= 0) { b5 = 0; s5 = k; s2 += k; } else { b2 -= k; b5 = -k; s5 = 0; } /* At this point d/10^k = (b * 2^b2 * 5^b5) / (2^s2 * 5^s5), where b is an odd integer, b2 >= 0, b5 >= 0, s2 >= 0, and s5 >= 0. */ if (mode < 0 || mode > 9) mode = 0; try_quick = 1; if (mode > 5) { mode -= 4; try_quick = 0; } leftright = 1; ilim = ilim1 = 0; switch(mode) { case 0: case 1: ilim = ilim1 = -1; i = 18; ndigits = 0; break; case 2: leftright = 0; /* no break */ case 4: if (ndigits <= 0) ndigits = 1; ilim = ilim1 = i = ndigits; break; case 3: leftright = 0; /* no break */ case 5: i = ndigits + k + 1; ilim = i; ilim1 = i - 1; if (i <= 0) i = 1; } /* ilim is the maximum number of significant digits we want, based on k and ndigits. */ /* ilim1 is the maximum number of significant digits we want, based on k and ndigits, when it turns out that k was computed too high by one. */ /* Ensure space for at least i+1 characters, including trailing null. */ if (bufsize <= (size_t)i) { Bfree(b); JS_ASSERT(JS_FALSE); return JS_FALSE; } s = buf; if (ilim >= 0 && ilim <= Quick_max && try_quick) { /* Try to get by with floating-point arithmetic. */ i = 0; d2 = d; k0 = k; ilim0 = ilim; ieps = 2; /* conservative */ /* Divide d by 10^k, keeping track of the roundoff error and avoiding overflows. */ if (k > 0) { ds = tens[k&0xf]; j = k >> 4; if (j & Bletch) { /* prevent overflows */ j &= Bletch - 1; d /= bigtens[n_bigtens-1]; ieps++; } for(; j; j >>= 1, i++) if (j & 1) { ieps++; ds *= bigtens[i]; } d /= ds; } else if ((j1 = -k) != 0) { d *= tens[j1 & 0xf]; for(j = j1 >> 4; j; j >>= 1, i++) if (j & 1) { ieps++; d *= bigtens[i]; } } /* Check that k was computed correctly. */ if (k_check && d < 1. && ilim > 0) { if (ilim1 <= 0) goto fast_failed; ilim = ilim1; k--; d *= 10.; ieps++; } /* eps bounds the cumulative error. */ eps = ieps*d + 7.; set_word0(eps, word0(eps) - (P-1)*Exp_msk1); if (ilim == 0) { S = mhi = 0; d -= 5.; if (d > eps) goto one_digit; if (d < -eps) goto no_digits; goto fast_failed; } #ifndef No_leftright if (leftright) { /* Use Steele & White method of only * generating digits needed. */ eps = 0.5/tens[ilim-1] - eps; for(i = 0;;) { L = (Long)d; d -= L; *s++ = '0' + (char)L; if (d < eps) goto ret1; if (1. - d < eps) goto bump_up; if (++i >= ilim) break; eps *= 10.; d *= 10.; } } else { #endif /* Generate ilim digits, then fix them up. */ eps *= tens[ilim-1]; for(i = 1;; i++, d *= 10.) { L = (Long)d; d -= L; *s++ = '0' + (char)L; if (i == ilim) { if (d > 0.5 + eps) goto bump_up; else if (d < 0.5 - eps) { while(*--s == '0') ; s++; goto ret1; } break; } } #ifndef No_leftright } #endif fast_failed: s = buf; d = d2; k = k0; ilim = ilim0; } /* Do we have a "small" integer? */ if (be >= 0 && k <= Int_max) { /* Yes. */ ds = tens[k]; if (ndigits < 0 && ilim <= 0) { S = mhi = 0; if (ilim < 0 || d < 5*ds || (!biasUp && d == 5*ds)) goto no_digits; goto one_digit; } /* Use true number of digits to limit looping. */ for(i = 1; i<=k+1; i++) { L = (Long) (d / ds); d -= L*ds; #ifdef Check_FLT_ROUNDS /* If FLT_ROUNDS == 2, L will usually be high by 1 */ if (d < 0) { L--; d += ds; } #endif *s++ = '0' + (char)L; if (i == ilim) { d += d; if ((d > ds) || (d == ds && (L & 1 || biasUp))) { bump_up: while(*--s == '9') if (s == buf) { k++; *s = '0'; break; } ++*s++; } break; } d *= 10.; } goto ret1; } m2 = b2; m5 = b5; if (leftright) { if (mode < 2) { i = #ifndef Sudden_Underflow denorm ? be + (Bias + (P-1) - 1 + 1) : #endif 1 + P - bbits; /* i is 1 plus the number of trailing zero bits in d's significand. Thus, (2^m2 * 5^m5) / (2^(s2+i) * 5^s5) = (1/2 lsb of d)/10^k. */ } else { j = ilim - 1; if (m5 >= j) m5 -= j; else { s5 += j -= m5; b5 += j; m5 = 0; } if ((i = ilim) < 0) { m2 -= i; i = 0; } /* (2^m2 * 5^m5) / (2^(s2+i) * 5^s5) = (1/2 * 10^(1-ilim))/10^k. */ } b2 += i; s2 += i; mhi = i2b(1); if (!mhi) goto nomem; /* (mhi * 2^m2 * 5^m5) / (2^s2 * 5^s5) = one-half of last printed (when mode >= 2) or input (when mode < 2) significant digit, divided by 10^k. */ } /* We still have d/10^k = (b * 2^b2 * 5^b5) / (2^s2 * 5^s5). Reduce common factors in b2, m2, and s2 without changing the equalities. */ if (m2 > 0 && s2 > 0) { i = m2 < s2 ? m2 : s2; b2 -= i; m2 -= i; s2 -= i; } /* Fold b5 into b and m5 into mhi. */ if (b5 > 0) { if (leftright) { if (m5 > 0) { mhi = pow5mult(mhi, m5); if (!mhi) goto nomem; b1 = mult(mhi, b); if (!b1) goto nomem; Bfree(b); b = b1; } if ((j = b5 - m5) != 0) { b = pow5mult(b, j); if (!b) goto nomem; } } else { b = pow5mult(b, b5); if (!b) goto nomem; } } /* Now we have d/10^k = (b * 2^b2) / (2^s2 * 5^s5) and (mhi * 2^m2) / (2^s2 * 5^s5) = one-half of last printed or input significant digit, divided by 10^k. */ S = i2b(1); if (!S) goto nomem; if (s5 > 0) { S = pow5mult(S, s5); if (!S) goto nomem; } /* Now we have d/10^k = (b * 2^b2) / (S * 2^s2) and (mhi * 2^m2) / (S * 2^s2) = one-half of last printed or input significant digit, divided by 10^k. */ /* Check for special case that d is a normalized power of 2. */ spec_case = 0; if (mode < 2) { if (!word1(d) && !(word0(d) & Bndry_mask) #ifndef Sudden_Underflow && word0(d) & (Exp_mask & Exp_mask << 1) #endif ) { /* The special case. Here we want to be within a quarter of the last input significant digit instead of one half of it when the decimal output string's value is less than d. */ b2 += Log2P; s2 += Log2P; spec_case = 1; } } /* Arrange for convenient computation of quotients: * shift left if necessary so divisor has 4 leading 0 bits. * * Perhaps we should just compute leading 28 bits of S once * and for all and pass them and a shift to quorem, so it * can do shifts and ors to compute the numerator for q. */ if ((i = ((s5 ? 32 - hi0bits(S->x[S->wds-1]) : 1) + s2) & 0x1f) != 0) i = 32 - i; /* i is the number of leading zero bits in the most significant word of S*2^s2. */ if (i > 4) { i -= 4; b2 += i; m2 += i; s2 += i; } else if (i < 4) { i += 28; b2 += i; m2 += i; s2 += i; } /* Now S*2^s2 has exactly four leading zero bits in its most significant word. */ if (b2 > 0) { b = lshift(b, b2); if (!b) goto nomem; } if (s2 > 0) { S = lshift(S, s2); if (!S) goto nomem; } /* Now we have d/10^k = b/S and (mhi * 2^m2) / S = maximum acceptable error, divided by 10^k. */ if (k_check) { if (cmp(b,S) < 0) { k--; b = multadd(b, 10, 0); /* we botched the k estimate */ if (!b) goto nomem; if (leftright) { mhi = multadd(mhi, 10, 0); if (!mhi) goto nomem; } ilim = ilim1; } } /* At this point 1 <= d/10^k = b/S < 10. */ if (ilim <= 0 && mode > 2) { /* We're doing fixed-mode output and d is less than the minimum nonzero output in this mode. Output either zero or the minimum nonzero output depending on which is closer to d. */ if (ilim < 0) goto no_digits; S = multadd(S,5,0); if (!S) goto nomem; i = cmp(b,S); if (i < 0 || (i == 0 && !biasUp)) { /* Always emit at least one digit. If the number appears to be zero using the current mode, then emit one '0' digit and set decpt to 1. */ /*no_digits: k = -1 - ndigits; goto ret; */ goto no_digits; } one_digit: *s++ = '1'; k++; goto ret; } if (leftright) { if (m2 > 0) { mhi = lshift(mhi, m2); if (!mhi) goto nomem; } /* Compute mlo -- check for special case * that d is a normalized power of 2. */ mlo = mhi; if (spec_case) { mhi = Balloc(mhi->k); if (!mhi) goto nomem; Bcopy(mhi, mlo); mhi = lshift(mhi, Log2P); if (!mhi) goto nomem; } /* mlo/S = maximum acceptable error, divided by 10^k, if the output is less than d. */ /* mhi/S = maximum acceptable error, divided by 10^k, if the output is greater than d. */ for(i = 1;;i++) { dig = quorem(b,S) + '0'; /* Do we yet have the shortest decimal string * that will round to d? */ j = cmp(b, mlo); /* j is b/S compared with mlo/S. */ delta = diff(S, mhi); if (!delta) goto nomem; j1 = delta->sign ? 1 : cmp(b, delta); Bfree(delta); /* j1 is b/S compared with 1 - mhi/S. */ #ifndef ROUND_BIASED if (j1 == 0 && !mode && !(word1(d) & 1)) { if (dig == '9') goto round_9_up; if (j > 0) dig++; *s++ = (char)dig; goto ret; } #endif if ((j < 0) || (j == 0 && !mode #ifndef ROUND_BIASED && !(word1(d) & 1) #endif )) { if (j1 > 0) { /* Either dig or dig+1 would work here as the least significant decimal digit. Use whichever would produce a decimal value closer to d. */ b = lshift(b, 1); if (!b) goto nomem; j1 = cmp(b, S); if (((j1 > 0) || (j1 == 0 && (dig & 1 || biasUp))) && (dig++ == '9')) goto round_9_up; } *s++ = (char)dig; goto ret; } if (j1 > 0) { if (dig == '9') { /* possible if i == 1 */ round_9_up: *s++ = '9'; goto roundoff; } *s++ = (char)dig + 1; goto ret; } *s++ = (char)dig; if (i == ilim) break; b = multadd(b, 10, 0); if (!b) goto nomem; if (mlo == mhi) { mlo = mhi = multadd(mhi, 10, 0); if (!mhi) goto nomem; } else { mlo = multadd(mlo, 10, 0); if (!mlo) goto nomem; mhi = multadd(mhi, 10, 0); if (!mhi) goto nomem; } } } else for(i = 1;; i++) { *s++ = (char)(dig = quorem(b,S) + '0'); if (i >= ilim) break; b = multadd(b, 10, 0); if (!b) goto nomem; } /* Round off last digit */ b = lshift(b, 1); if (!b) goto nomem; j = cmp(b, S); if ((j > 0) || (j == 0 && (dig & 1 || biasUp))) { roundoff: while(*--s == '9') if (s == buf) { k++; *s++ = '1'; goto ret; } ++*s++; } else { /* Strip trailing zeros */ while(*--s == '0') ; s++; } ret: Bfree(S); if (mhi) { if (mlo && mlo != mhi) Bfree(mlo); Bfree(mhi); } ret1: Bfree(b); JS_ASSERT(s < buf + bufsize); *s = '\0'; if (rve) *rve = s; *decpt = k + 1; return JS_TRUE; nomem: Bfree(S); if (mhi) { if (mlo && mlo != mhi) Bfree(mlo); Bfree(mhi); } Bfree(b); return JS_FALSE; } /* Mapping of JSDToStrMode -> js_dtoa mode */ static const int dtoaModes[] = { 0, /* DTOSTR_STANDARD */ 0, /* DTOSTR_STANDARD_EXPONENTIAL, */ 3, /* DTOSTR_FIXED, */ 2, /* DTOSTR_EXPONENTIAL, */ 2}; /* DTOSTR_PRECISION */ JS_FRIEND_API(char *) JS_dtostr(char *buffer, size_t bufferSize, JSDToStrMode mode, int precision, double d) { int decPt; /* Position of decimal point relative to first digit returned by js_dtoa */ int sign; /* Nonzero if the sign bit was set in d */ int nDigits; /* Number of significand digits returned by js_dtoa */ char *numBegin = buffer+2; /* Pointer to the digits returned by js_dtoa; the +2 leaves space for */ /* the sign and/or decimal point */ char *numEnd; /* Pointer past the digits returned by js_dtoa */ JSBool dtoaRet; JS_ASSERT(bufferSize >= (size_t)(mode <= DTOSTR_STANDARD_EXPONENTIAL ? DTOSTR_STANDARD_BUFFER_SIZE : DTOSTR_VARIABLE_BUFFER_SIZE(precision))); if (mode == DTOSTR_FIXED && (d >= 1e21 || d <= -1e21)) mode = DTOSTR_STANDARD; /* Change mode here rather than below because the buffer may not be large enough to hold a large integer. */ /* Locking for Balloc's shared buffers */ ACQUIRE_DTOA_LOCK(); dtoaRet = js_dtoa(d, dtoaModes[mode], mode >= DTOSTR_FIXED, precision, &decPt, &sign, &numEnd, numBegin, bufferSize-2); RELEASE_DTOA_LOCK(); if (!dtoaRet) return 0; nDigits = numEnd - numBegin; /* If Infinity, -Infinity, or NaN, return the string regardless of the mode. */ if (decPt != 9999) { JSBool exponentialNotation = JS_FALSE; int minNDigits = 0; /* Minimum number of significand digits required by mode and precision */ char *p; char *q; switch (mode) { case DTOSTR_STANDARD: if (decPt < -5 || decPt > 21) exponentialNotation = JS_TRUE; else minNDigits = decPt; break; case DTOSTR_FIXED: if (precision >= 0) minNDigits = decPt + precision; else minNDigits = decPt; break; case DTOSTR_EXPONENTIAL: JS_ASSERT(precision > 0); minNDigits = precision; /* Fall through */ case DTOSTR_STANDARD_EXPONENTIAL: exponentialNotation = JS_TRUE; break; case DTOSTR_PRECISION: JS_ASSERT(precision > 0); minNDigits = precision; if (decPt < -5 || decPt > precision) exponentialNotation = JS_TRUE; break; } /* If the number has fewer than minNDigits, pad it with zeros at the end */ if (nDigits < minNDigits) { p = numBegin + minNDigits; nDigits = minNDigits; do { *numEnd++ = '0'; } while (numEnd != p); *numEnd = '\0'; } if (exponentialNotation) { /* Insert a decimal point if more than one significand digit */ if (nDigits != 1) { numBegin--; numBegin[0] = numBegin[1]; numBegin[1] = '.'; } JS_snprintf(numEnd, bufferSize - (numEnd - buffer), "e%+d", decPt-1); } else if (decPt != nDigits) { /* Some kind of a fraction in fixed notation */ JS_ASSERT(decPt <= nDigits); if (decPt > 0) { /* dd...dd . dd...dd */ p = --numBegin; do { *p = p[1]; p++; } while (--decPt); *p = '.'; } else { /* 0 . 00...00dd...dd */ p = numEnd; numEnd += 1 - decPt; q = numEnd; JS_ASSERT(numEnd < buffer + bufferSize); *numEnd = '\0'; while (p != numBegin) *--q = *--p; for (p = numBegin + 1; p != q; p++) *p = '0'; *numBegin = '.'; *--numBegin = '0'; } } } /* If negative and neither -0.0 nor NaN, output a leading '-'. */ if (sign && !(word0(d) == Sign_bit && word1(d) == 0) && !((word0(d) & Exp_mask) == Exp_mask && (word1(d) || (word0(d) & Frac_mask)))) { *--numBegin = '-'; } return numBegin; } /* Let b = floor(b / divisor), and return the remainder. b must be nonnegative. * divisor must be between 1 and 65536. * This function cannot run out of memory. */ static uint32 divrem(Bigint *b, uint32 divisor) { int32 n = b->wds; uint32 remainder = 0; ULong *bx; ULong *bp; JS_ASSERT(divisor > 0 && divisor <= 65536); if (!n) return 0; /* b is zero */ bx = b->x; bp = bx + n; do { ULong a = *--bp; ULong dividend = remainder << 16 | a >> 16; ULong quotientHi = dividend / divisor; ULong quotientLo; remainder = dividend - quotientHi*divisor; JS_ASSERT(quotientHi <= 0xFFFF && remainder < divisor); dividend = remainder << 16 | (a & 0xFFFF); quotientLo = dividend / divisor; remainder = dividend - quotientLo*divisor; JS_ASSERT(quotientLo <= 0xFFFF && remainder < divisor); *bp = quotientHi << 16 | quotientLo; } while (bp != bx); /* Decrease the size of the number if its most significant word is now zero. */ if (bx[n-1] == 0) b->wds--; return remainder; } /* "-0.0000...(1073 zeros after decimal point)...0001\0" is the longest string that we could produce, * which occurs when printing -5e-324 in binary. We could compute a better estimate of the size of * the output string and malloc fewer bytes depending on d and base, but why bother? */ #define DTOBASESTR_BUFFER_SIZE 1078 #define BASEDIGIT(digit) ((char)(((digit) >= 10) ? 'a' - 10 + (digit) : '0' + (digit))) JS_FRIEND_API(char *) JS_dtobasestr(int base, double d) { char *buffer; /* The output string */ char *p; /* Pointer to current position in the buffer */ char *pInt; /* Pointer to the beginning of the integer part of the string */ char *q; uint32 digit; double di; /* d truncated to an integer */ double df; /* The fractional part of d */ JS_ASSERT(base >= 2 && base <= 36); buffer = (char*) malloc(DTOBASESTR_BUFFER_SIZE); if (buffer) { p = buffer; if (d < 0.0 #if defined(XP_WIN) || defined(XP_OS2) && !((word0(d) & Exp_mask) == Exp_mask && ((word0(d) & Frac_mask) || word1(d))) /* Visual C++ doesn't know how to compare against NaN */ #endif ) { *p++ = '-'; d = -d; } /* Check for Infinity and NaN */ if ((word0(d) & Exp_mask) == Exp_mask) { strcpy(p, !word1(d) && !(word0(d) & Frac_mask) ? "Infinity" : "NaN"); return buffer; } /* Locking for Balloc's shared buffers */ ACQUIRE_DTOA_LOCK(); /* Output the integer part of d with the digits in reverse order. */ pInt = p; di = fd_floor(d); if (di <= 4294967295.0) { uint32 n = (uint32)di; if (n) do { uint32 m = n / base; digit = n - m*base; n = m; JS_ASSERT(digit < (uint32)base); *p++ = BASEDIGIT(digit); } while (n); else *p++ = '0'; } else { int32 e; int32 bits; /* Number of significant bits in di; not used. */ Bigint *b = d2b(di, &e, &bits); if (!b) goto nomem1; b = lshift(b, e); if (!b) { nomem1: Bfree(b); RELEASE_DTOA_LOCK(); free(buffer); return NULL; } do { digit = divrem(b, base); JS_ASSERT(digit < (uint32)base); *p++ = BASEDIGIT(digit); } while (b->wds); Bfree(b); } /* Reverse the digits of the integer part of d. */ q = p-1; while (q > pInt) { char ch = *pInt; *pInt++ = *q; *q-- = ch; } df = d - di; if (df != 0.0) { /* We have a fraction. */ int32 e, bbits, s2, done; Bigint *b, *s, *mlo, *mhi; b = s = mlo = mhi = NULL; *p++ = '.'; b = d2b(df, &e, &bbits); if (!b) { nomem2: Bfree(b); Bfree(s); if (mlo != mhi) Bfree(mlo); Bfree(mhi); RELEASE_DTOA_LOCK(); free(buffer); return NULL; } JS_ASSERT(e < 0); /* At this point df = b * 2^e. e must be less than zero because 0 < df < 1. */ s2 = -(int32)(word0(d) >> Exp_shift1 & Exp_mask>>Exp_shift1); #ifndef Sudden_Underflow if (!s2) s2 = -1; #endif s2 += Bias + P; /* 1/2^s2 = (nextDouble(d) - d)/2 */ JS_ASSERT(-s2 < e); mlo = i2b(1); if (!mlo) goto nomem2; mhi = mlo; if (!word1(d) && !(word0(d) & Bndry_mask) #ifndef Sudden_Underflow && word0(d) & (Exp_mask & Exp_mask << 1) #endif ) { /* The special case. Here we want to be within a quarter of the last input significant digit instead of one half of it when the output string's value is less than d. */ s2 += Log2P; mhi = i2b(1< df = b/2^s2 > 0; * (d - prevDouble(d))/2 = mlo/2^s2; * (nextDouble(d) - d)/2 = mhi/2^s2. */ done = JS_FALSE; do { int32 j, j1; Bigint *delta; b = multadd(b, base, 0); if (!b) goto nomem2; digit = quorem2(b, s2); if (mlo == mhi) { mlo = mhi = multadd(mlo, base, 0); if (!mhi) goto nomem2; } else { mlo = multadd(mlo, base, 0); if (!mlo) goto nomem2; mhi = multadd(mhi, base, 0); if (!mhi) goto nomem2; } /* Do we yet have the shortest string that will round to d? */ j = cmp(b, mlo); /* j is b/2^s2 compared with mlo/2^s2. */ delta = diff(s, mhi); if (!delta) goto nomem2; j1 = delta->sign ? 1 : cmp(b, delta); Bfree(delta); /* j1 is b/2^s2 compared with 1 - mhi/2^s2. */ #ifndef ROUND_BIASED if (j1 == 0 && !(word1(d) & 1)) { if (j > 0) digit++; done = JS_TRUE; } else #endif if (j < 0 || (j == 0 #ifndef ROUND_BIASED && !(word1(d) & 1) #endif )) { if (j1 > 0) { /* Either dig or dig+1 would work here as the least significant digit. Use whichever would produce an output value closer to d. */ b = lshift(b, 1); if (!b) goto nomem2; j1 = cmp(b, s); if (j1 > 0) /* The even test (|| (j1 == 0 && (digit & 1))) is not here because it messes up odd base output * such as 3.5 in base 3. */ digit++; } done = JS_TRUE; } else if (j1 > 0) { digit++; done = JS_TRUE; } JS_ASSERT(digit < (uint32)base); *p++ = BASEDIGIT(digit); } while (!done); Bfree(b); Bfree(s); if (mlo != mhi) Bfree(mlo); Bfree(mhi); } JS_ASSERT(p < buffer + DTOBASESTR_BUFFER_SIZE); *p = '\0'; RELEASE_DTOA_LOCK(); } return buffer; }