RetroZilla/nsprpub/pr/tests/inrval.c
2015-10-20 23:03:22 -04:00

243 lines
8.0 KiB
C

/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is the Netscape Portable Runtime (NSPR).
*
* The Initial Developer of the Original Code is
* Netscape Communications Corporation.
* Portions created by the Initial Developer are Copyright (C) 1998-2000
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
*
* Alternatively, the contents of this file may be used under the terms of
* either the GNU General Public License Version 2 or later (the "GPL"), or
* the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
/*
** file: inrval.c
** description: Interval conversion test.
** Modification History:
** 15-May-97 AGarcia- Converted the test to accomodate the debug_mode flag.
** The debug mode will print all of the printfs associated with this test.
** The regress mode will be the default mode. Since the regress tool limits
** the output to a one line status:PASS or FAIL,all of the printf statements
** have been handled with an if (debug_mode) statement.
** 04-June-97 AGarcia removed the Test_Result function. Regress tool has been updated to
** recognize the return code from tha main program.
**/
/***********************************************************************
** Includes
***********************************************************************/
/* Used to get the command line option */
#include "plgetopt.h"
#include "prinit.h"
#ifdef XP_MAC
#include "pralarm.h"
#else
#include "obsolete/pralarm.h"
#endif
#include "prio.h"
#include "prprf.h"
#include "prlock.h"
#include "prlong.h"
#include "prcvar.h"
#include "prinrval.h"
#include "prtime.h"
#include "plgetopt.h"
#include <stdio.h>
#include <stdlib.h>
static PRIntn debug_mode;
static PRFileDesc *output;
static void TestConversions(void)
{
PRIntervalTime ticks = PR_TicksPerSecond();
if (debug_mode) {
PR_fprintf(output, "PR_TicksPerSecond: %ld\n\n", ticks);
PR_fprintf(output, "PR_SecondsToInterval(1): %ld\n", PR_SecondsToInterval(1));
PR_fprintf(output, "PR_MillisecondsToInterval(1000): %ld\n", PR_MillisecondsToInterval(1000));
PR_fprintf(output, "PR_MicrosecondsToInterval(1000000): %ld\n\n", PR_MicrosecondsToInterval(1000000));
PR_fprintf(output, "PR_SecondsToInterval(3): %ld\n", PR_SecondsToInterval(3));
PR_fprintf(output, "PR_MillisecondsToInterval(3000): %ld\n", PR_MillisecondsToInterval(3000));
PR_fprintf(output, "PR_MicrosecondsToInterval(3000000): %ld\n\n", PR_MicrosecondsToInterval(3000000));
PR_fprintf(output, "PR_IntervalToSeconds(%ld): %ld\n", ticks, PR_IntervalToSeconds(ticks));
PR_fprintf(output, "PR_IntervalToMilliseconds(%ld): %ld\n", ticks, PR_IntervalToMilliseconds(ticks));
PR_fprintf(output, "PR_IntervalToMicroseconds(%ld): %ld\n\n", ticks, PR_IntervalToMicroseconds(ticks));
ticks *= 3;
PR_fprintf(output, "PR_IntervalToSeconds(%ld): %ld\n", ticks, PR_IntervalToSeconds(ticks));
PR_fprintf(output, "PR_IntervalToMilliseconds(%ld): %ld\n", ticks, PR_IntervalToMilliseconds(ticks));
PR_fprintf(output, "PR_IntervalToMicroseconds(%ld): %ld\n\n", ticks, PR_IntervalToMicroseconds(ticks));
} /*end debug mode */
} /* TestConversions */
static void TestIntervalOverhead(void)
{
/* Hopefully the optimizer won't delete this function */
PRUint32 elapsed, per_call, loops = 1000000;
PRIntervalTime timeout, timein = PR_IntervalNow();
while (--loops > 0)
timeout = PR_IntervalNow();
elapsed = 1000U * PR_IntervalToMicroseconds(timeout - timein);
per_call = elapsed / 1000000U;
PR_fprintf(
output, "Overhead of 'PR_IntervalNow()' is %u nsecs\n\n", per_call);
} /* TestIntervalOverhead */
static void TestNowOverhead(void)
{
PRTime timeout, timein;
PRInt32 overhead, loops = 1000000;
PRInt64 elapsed, per_call, ten23rd, ten26th;
LL_I2L(ten23rd, 1000);
LL_I2L(ten26th, 1000000);
timein = PR_Now();
while (--loops > 0)
timeout = PR_Now();
LL_SUB(elapsed, timeout, timein);
LL_MUL(elapsed, elapsed, ten23rd);
LL_DIV(per_call, elapsed, ten26th);
LL_L2I(overhead, per_call);
PR_fprintf(
output, "Overhead of 'PR_Now()' is %u nsecs\n\n", overhead);
} /* TestNowOverhead */
static void TestIntervals(void)
{
PRStatus rv;
PRUint32 delta;
PRInt32 seconds;
PRUint64 elapsed, thousand;
PRTime timein, timeout;
PRLock *ml = PR_NewLock();
PRCondVar *cv = PR_NewCondVar(ml);
for (seconds = 0; seconds < 10; ++seconds)
{
PRIntervalTime ticks = PR_SecondsToInterval(seconds);
PR_Lock(ml);
timein = PR_Now();
rv = PR_WaitCondVar(cv, ticks);
timeout = PR_Now();
PR_Unlock(ml);
LL_SUB(elapsed, timeout, timein);
LL_I2L(thousand, 1000);
LL_DIV(elapsed, elapsed, thousand);
LL_L2UI(delta, elapsed);
if (debug_mode) PR_fprintf(output,
"TestIntervals: %swaiting %ld seconds took %ld msecs\n",
((rv == PR_SUCCESS) ? "" : "FAILED "), seconds, delta);
}
PR_DestroyCondVar(cv);
PR_DestroyLock(ml);
if (debug_mode) PR_fprintf(output, "\n");
} /* TestIntervals */
static PRIntn PR_CALLBACK RealMain(int argc, char** argv)
{
PRUint32 vcpu, cpus = 0, loops = 1000;
/* The command line argument: -d is used to determine if the test is being run
in debug mode. The regress tool requires only one line output:PASS or FAIL.
All of the printfs associated with this test has been handled with a if (debug_mode)
test.
Usage: test_name -d
*/
/* main test */
PLOptStatus os;
PLOptState *opt = PL_CreateOptState(argc, argv, "dl:c:");
while (PL_OPT_EOL != (os = PL_GetNextOpt(opt)))
{
if (PL_OPT_BAD == os) continue;
switch (opt->option)
{
case 'd': /* debug mode */
debug_mode = 1;
break;
case 'c': /* concurrency counter */
cpus = atoi(opt->value);
break;
case 'l': /* loop counter */
loops = atoi(opt->value);
break;
default:
break;
}
}
PL_DestroyOptState(opt);
output = PR_GetSpecialFD(PR_StandardOutput);
PR_fprintf(output, "inrval: Examine stdout to determine results.\n");
if (cpus == 0) cpus = 8;
if (loops == 0) loops = 1000;
if (debug_mode > 0)
{
PR_fprintf(output, "Inrval: Using %d loops\n", loops);
PR_fprintf(output, "Inrval: Using 1 and %d cpu(s)\n", cpus);
}
for (vcpu = 1; vcpu <= cpus; vcpu += cpus - 1)
{
if (debug_mode)
PR_fprintf(output, "\nInrval: Using %d CPU(s)\n\n", vcpu);
PR_SetConcurrency(vcpu);
TestNowOverhead();
TestIntervalOverhead();
TestConversions();
TestIntervals();
}
return 0;
}
PRIntn main(PRIntn argc, char *argv[])
{
PRIntn rv;
PR_STDIO_INIT();
rv = PR_Initialize(RealMain, argc, argv, 0);
return rv;
} /* main */