RetroZilla/nsprpub/pr/tests/join.c
2015-10-20 23:03:22 -04:00

265 lines
7.9 KiB
C

/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is the Netscape Portable Runtime (NSPR).
*
* The Initial Developer of the Original Code is
* Netscape Communications Corporation.
* Portions created by the Initial Developer are Copyright (C) 1998-2000
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
*
* Alternatively, the contents of this file may be used under the terms of
* either the GNU General Public License Version 2 or later (the "GPL"), or
* the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
/***********************************************************************
**
** Name: dbmalloc1.c
**
** Description: Tests PR_SetMallocCountdown PR_ClearMallocCountdown functions.
**
** Modification History:
**
** 19-May-97 AGarcia - separate the four join tests into different unit test modules.
** AGarcia- Converted the test to accomodate the debug_mode flag.
** The debug mode will print all of the printfs associated with this test.
** The regress mode will be the default mode. Since the regress tool limits
** the output to a one line status:PASS or FAIL,all of the printf statements
** have been handled with an if (debug_mode) statement.
***********************************************************************/
/***********************************************************************
** Includes
***********************************************************************/
/* Used to get the command line option */
#include "plgetopt.h"
#include "prttools.h"
#include "nspr.h"
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#ifdef XP_MAC
#include "prlog.h"
#define printf PR_LogPrint
extern void SetupMacPrintfLog(char *logFile);
#endif
/***********************************************************************
** PRIVATE FUNCTION: Test_Result
** DESCRIPTION: Used in conjunction with the regress tool, prints out the
** status of the test case.
** INPUTS: PASS/FAIL
** OUTPUTS: None
** RETURN: None
** SIDE EFFECTS:
**
** RESTRICTIONS:
** None
** MEMORY: NA
** ALGORITHM: Determine what the status is and print accordingly.
**
***********************************************************************/
static void Test_Result (int result)
{
if (result == PASS)
printf ("PASS\n");
else
printf ("FAIL\n");
exit (1);
}
/*
Program to test joining of threads. Two threads are created. One
to be waited upon until it has started. The other to join after it has
completed.
*/
static void PR_CALLBACK lowPriority(void *arg)
{
}
static void PR_CALLBACK highPriority(void *arg)
{
}
static void PR_CALLBACK unjoinable(void *arg)
{
PR_Sleep(PR_INTERVAL_NO_TIMEOUT);
}
void runTest(PRThreadScope scope1, PRThreadScope scope2)
{
PRThread *low,*high;
/* create the low and high priority threads */
low = PR_CreateThread(PR_USER_THREAD,
lowPriority, 0,
PR_PRIORITY_LOW,
scope1,
PR_JOINABLE_THREAD,
0);
if (!low) {
if (debug_mode) printf("\tcannot create low priority thread\n");
else Test_Result(FAIL);
return;
}
high = PR_CreateThread(PR_USER_THREAD,
highPriority, 0,
PR_PRIORITY_HIGH,
scope2,
PR_JOINABLE_THREAD,
0);
if (!high) {
if (debug_mode) printf("\tcannot create high priority thread\n");
else Test_Result(FAIL);
return;
}
/* Do the joining for both threads */
if (PR_JoinThread(low) == PR_FAILURE) {
if (debug_mode) printf("\tcannot join low priority thread\n");
else Test_Result (FAIL);
return;
} else {
if (debug_mode) printf("\tjoined low priority thread\n");
}
if (PR_JoinThread(high) == PR_FAILURE) {
if (debug_mode) printf("\tcannot join high priority thread\n");
else Test_Result(FAIL);
return;
} else {
if (debug_mode) printf("\tjoined high priority thread\n");
}
}
void joinWithUnjoinable(void)
{
PRThread *thread;
/* create the unjoinable thread */
thread = PR_CreateThread(PR_USER_THREAD,
unjoinable, 0,
PR_PRIORITY_NORMAL,
PR_GLOBAL_THREAD,
PR_UNJOINABLE_THREAD,
0);
if (!thread) {
if (debug_mode) printf("\tcannot create unjoinable thread\n");
else Test_Result(FAIL);
return;
}
if (PR_JoinThread(thread) == PR_SUCCESS) {
if (debug_mode) printf("\tsuccessfully joined with unjoinable thread?!\n");
else Test_Result(FAIL);
return;
} else {
if (debug_mode) printf("\tcannot join with unjoinable thread, as expected\n");
if (PR_GetError() != PR_INVALID_ARGUMENT_ERROR) {
if (debug_mode) printf("\tWrong error code\n");
else Test_Result(FAIL);
return;
}
}
if (PR_Interrupt(thread) == PR_FAILURE) {
if (debug_mode) printf("\tcannot interrupt unjoinable thread\n");
else Test_Result(FAIL);
return;
} else {
if (debug_mode) printf("\tinterrupted unjoinable thread\n");
}
}
static PRIntn PR_CALLBACK RealMain(int argc, char **argv)
{
/* The command line argument: -d is used to determine if the test is being run
in debug mode. The regress tool requires only one line output:PASS or FAIL.
All of the printfs associated with this test has been handled with a if (debug_mode)
test.
Usage: test_name -d
*/
PLOptStatus os;
PLOptState *opt = PL_CreateOptState(argc, argv, "d:");
while (PL_OPT_EOL != (os = PL_GetNextOpt(opt)))
{
if (PL_OPT_BAD == os) continue;
switch (opt->option)
{
case 'd': /* debug mode */
debug_mode = 1;
break;
default:
break;
}
}
PL_DestroyOptState(opt);
#ifdef XP_MAC
SetupMacPrintfLog("join.log");
debug_mode = 1;
#endif
/* main test */
printf("User-User test\n");
runTest(PR_LOCAL_THREAD, PR_LOCAL_THREAD);
printf("User-Kernel test\n");
runTest(PR_LOCAL_THREAD, PR_GLOBAL_THREAD);
printf("Kernel-User test\n");
runTest(PR_GLOBAL_THREAD, PR_LOCAL_THREAD);
printf("Kernel-Kernel test\n");
runTest(PR_GLOBAL_THREAD, PR_GLOBAL_THREAD);
printf("Join with unjoinable thread\n");
joinWithUnjoinable();
printf("PASSED\n");
return 0;
}
PRIntn main(PRIntn argc, char *argv[])
{
PRIntn rv;
PR_STDIO_INIT();
rv = PR_Initialize(RealMain, argc, argv, 0);
return rv;
} /* main */