RetroZilla/security/nss/lib/libpkix/include/pkix_checker.h
2015-10-20 23:03:22 -04:00

428 lines
18 KiB
C

/* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is the PKIX-C library.
*
* The Initial Developer of the Original Code is
* Sun Microsystems, Inc.
* Portions created by the Initial Developer are
* Copyright 2004-2007 Sun Microsystems, Inc. All Rights Reserved.
*
* Contributor(s):
* Sun Microsystems, Inc.
*
* Alternatively, the contents of this file may be used under the terms of
* either the GNU General Public License Version 2 or later (the "GPL"), or
* the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
/*
* This file defines functions associated with the PKIX_CertChainChecker type.
*
*/
#ifndef _PKIX_CHECKER_H
#define _PKIX_CHECKER_H
#include "pkixt.h"
#ifdef __cplusplus
extern "C" {
#endif
/* General
*
* Please refer to the libpkix Programmer's Guide for detailed information
* about how to use the libpkix library. Certain key warnings and notices from
* that document are repeated here for emphasis.
*
* All identifiers in this file (and all public identifiers defined in
* libpkix) begin with "PKIX_". Private identifiers only intended for use
* within the library begin with "pkix_".
*
* A function returns NULL upon success, and a PKIX_Error pointer upon failure.
*
* Unless otherwise noted, for all accessor (gettor) functions that return a
* PKIX_PL_Object pointer, callers should assume that this pointer refers to a
* shared object. Therefore, the caller should treat this shared object as
* read-only and should not modify this shared object. When done using the
* shared object, the caller should release the reference to the object by
* using the PKIX_PL_Object_DecRef function.
*
* While a function is executing, if its arguments (or anything referred to by
* its arguments) are modified, free'd, or destroyed, the function's behavior
* is undefined.
*
*/
/* PKIX_CertChainChecker
*
* PKIX_CertChainCheckers provide a standard way for the caller to insert their
* own custom checks to validate certificates. This may be useful in many
* scenarios, including when the caller wishes to validate private certificate
* extensions. The CheckCallback allows custom certificate processing to take
* place. Additionally, a CertChainChecker can optionally maintain state
* between successive calls to the CheckCallback. This certChainCheckerState
* must be an Object (although any object type), allowing it to be
* reference-counted and allowing it to provide the standard Object functions
* (Equals, Hashcode, ToString, Compare, Duplicate). If the caller wishes
* their CertChainChecker to be used during chain building, their
* certChainCheckerState object must implement an appropriate Duplicate
* function. The builder uses this Duplicate function when backtracking.
*
* Once the caller has created a CertChainChecker object, the caller then
* specifies a CertChainChecker object in a ProcessingParams object
* and passes the ProcessingParams object to PKIX_ValidateChain or
* PKIX_BuildChain, which uses the objects to call the user's callback
* functions as needed during the validation or building process.
*
* A CertChainChecker may be presented certificates in the "reverse" direction
* (from trust anchor to target) or in the "forward" direction (from target to
* trust anchor). All CertChainCheckers must support "reverse checking", while
* support for "forward checking" is optional, but recommended. If "forward
* checking" is not supported, building chains may be much less efficient. The
* PKIX_CertChainChecker_IsForwardCheckingSupported function is used to
* determine whether forward checking is supported, and the
* PKIX_CertChainChecker_IsForwardDirectionExpected function is used to
* determine whether the CertChainChecker has been initialized to expect the
* certificates to be presented in the "forward" direction.
*/
/*
* FUNCTION: PKIX_CertChainChecker_CheckCallback
* DESCRIPTION:
*
* This callback function checks whether the specified Cert pointed to by
* "cert" is valid using "checker's" internal certChainCheckerState (if any)
* and removes the critical extensions that it processes (if any) from the
* List of OIDs (possibly empty) pointed to by "unresolvedCriticalExtensions".
* If the checker finds that the certificate is not valid, an Error pointer is
* returned.
*
* If the checker uses non-blocking I/O, the address of a platform-dependent
* non-blocking I/O context ("nbioContext") will be stored at "pNBIOContext",
* which the caller may use, in a platform-dependent way, to wait, poll, or
* otherwise determine when to try again. If the checker does not use
* non-blocking I/O, NULL will always be stored at "pNBIOContext". If a non-NULL
* value was stored, on a subsequent call the checker will attempt to complete
* the pending I/O and, if successful, NULL will be stored at "pNBIOContext".
*
* PARAMETERS:
* "checker"
* Address of CertChainChecker whose certChainCheckerState and
* CheckCallback logic is to be used. Must be non-NULL.
* "cert"
* Address of Cert that is to be validated using "checker".
* Must be non-NULL.
* "unresolvedCriticalExtensions"
* Address of List of OIDs that represents the critical certificate
* extensions that have yet to be resolved. This parameter may be
* modified during the function call. Must be non-NULL.
* "pNBIOContext"
* Address at which is stored a platform-dependent structure indicating
* whether checking was suspended for non-blocking I/O. Must be non-NULL.
* "plContext"
* Platform-specific context pointer.
* THREAD SAFETY:
* Thread Safe
*
* Multiple threads must be able to safely call this function without
* worrying about conflicts, even if they're operating on the same object.
* RETURNS:
* Returns NULL if the function succeeds.
* Returns a CertChainChecker Error if the function fails in a non-fatal way.
* Returns a Fatal Error if the function fails in an unrecoverable way.
*/
typedef PKIX_Error *
(*PKIX_CertChainChecker_CheckCallback)(
PKIX_CertChainChecker *checker,
PKIX_PL_Cert *cert,
PKIX_List *unresolvedCriticalExtensions, /* list of PKIX_PL_OID */
void **pNBIOContext,
void *plContext);
/*
* FUNCTION: PKIX_CertChainChecker_Create
* DESCRIPTION:
*
* Creates a new CertChainChecker and stores it at "pChecker". The new
* CertChainChecker uses the CheckCallback pointed to by "callback" as its
* callback function. It uses the Object pointed to by "initialState" (if
* any) as its initial state. As noted above, the initial state Object must
* provide a custom implementation of PKIX_PL_Object_Duplicate if the
* CertChainChecker is to be used during certificate chain building.
*
* A CertChainChecker may be presented certificates in the "reverse"
* direction (from trust anchor to target) or in the "forward" direction
* (from target to trust anchor). All CertChainCheckers must support
* "reverse checking", while support for "forward checking" is optional. The
* CertChainChecker is initialized with two Boolean flags that deal with this
* distinction: "forwardCheckingSupported" and "forwardDirectionExpected".
* If the "forwardCheckingSupported" Boolean flag is TRUE, it indicates that
* this CertChainChecker is capable of checking certificates in the "forward"
* direction (as well as the "reverse" direction, which all CertChainCheckers
* MUST support). The "forwardDirectionExpected" Boolean flag indicates in
* which direction the CertChainChecker should expect the certificates to be
* presented. This is particularly useful for CertChainCheckers that are
* capable of checking in either the "forward" direction or the "reverse"
* direction, but have different processing steps depending on the direction.
*
* The CertChainChecker also uses the List of OIDs pointed to by "extensions"
* as the supported certificate extensions. All certificate extensions that
* the CertChainChecker might possibly recognize and be able to process
* should be included in the List of supported extensions. If "checker" does
* not recognize or process any certificate extensions, "extensions" should
* be set to NULL.
*
* PARAMETERS:
* "callback"
* The CheckCallback function to be used. Must be non-NULL.
* "forwardCheckingSupported"
* A Boolean value indicating whether or not this CertChainChecker is
* capable of checking certificates in the "forward" direction.
* "forwardDirectionExpected"
* A Boolean value indicating whether or not this CertChainChecker should
* be used to check in the "forward" direction.
* "extensions"
* Address of List of OIDs representing the supported extensions.
* "initialState"
* Address of Object representing the CertChainChecker's initial state
* (if any).
* "pChecker"
* Address where object pointer will be stored. Must be non-NULL.
* "plContext"
* Platform-specific context pointer.
* THREAD SAFETY:
* Thread Safe (see Thread Safety Definitions in Programmer's Guide)
* RETURNS:
* Returns NULL if the function succeeds.
* Returns a CertChainChecker Error if the function fails in a non-fatal way.
* Returns a Fatal Error if the function fails in an unrecoverable way.
*/
PKIX_Error *
PKIX_CertChainChecker_Create(
PKIX_CertChainChecker_CheckCallback callback,
PKIX_Boolean forwardCheckingSupported,
PKIX_Boolean forwardDirectionExpected,
PKIX_List *extensions, /* list of PKIX_PL_OID */
PKIX_PL_Object *initialState,
PKIX_CertChainChecker **pChecker,
void *plContext);
/*
* FUNCTION: PKIX_CertChainChecker_GetCheckCallback
* DESCRIPTION:
*
* Retrieves a pointer to "checker's" Check callback function and puts it in
* "pCallback".
*
* PARAMETERS:
* "checker"
* The CertChainChecker whose Check callback is desired. Must be non-NULL.
* "pCallback"
* Address where Check callback function pointer will be stored.
* Must be non-NULL.
* "plContext"
* Platform-specific context pointer.
* THREAD SAFETY:
* Thread Safe (see Thread Safety Definitions in Programmer's Guide)
* RETURNS:
* Returns NULL if the function succeeds.
* Returns a CertChainChecker Error if the function fails in a non-fatal way.
* Returns a Fatal Error if the function fails in an unrecoverable way.
*/
PKIX_Error *
PKIX_CertChainChecker_GetCheckCallback(
PKIX_CertChainChecker *checker,
PKIX_CertChainChecker_CheckCallback *pCallback,
void *plContext);
/*
* FUNCTION: PKIX_CertChainChecker_IsForwardCheckingSupported
* DESCRIPTION:
*
* Checks whether forward checking is supported by the CertChainChecker
* pointed to by "checker" and stores the Boolean result at
* "pForwardCheckingSupported".
*
* A CertChainChecker may be presented certificates in the "reverse"
* direction (from trust anchor to target) or in the "forward" direction
* (from target to trust anchor). All CertChainCheckers must support
* "reverse checking", while support for "forward checking" is optional. This
* function is used to determine whether forward checking is supported.
*
* PARAMETERS:
* "checker"
* The CertChainChecker whose ability to validate certificates in the
* "forward" direction is to be checked. Must be non-NULL.
* "pForwardCheckingSupported"
* Destination of the Boolean result. Must be non-NULL.
* "plContext"
* Platform-specific context pointer.
* THREAD SAFETY:
* Thread Safe (see Thread Safety Definitions in Programmer's Guide)
* RETURNS:
* Returns NULL if the function succeeds.
* Returns a CertChainChecker Error if the function fails in a non-fatal way.
* Returns a Fatal Error if the function fails in an unrecoverable way.
*/
PKIX_Error *
PKIX_CertChainChecker_IsForwardCheckingSupported(
PKIX_CertChainChecker *checker,
PKIX_Boolean *pForwardCheckingSupported,
void *plContext);
/*
* FUNCTION: PKIX_CertChainChecker_IsForwardDirectionExpected
* DESCRIPTION:
*
* Checks whether the CertChainChecker pointed to by "checker" has been
* initialized to expect the certificates to be presented in the "forward"
* direction and stores the Boolean result at "pForwardDirectionExpected".
*
* A CertChainChecker may be presented certificates in the "reverse"
* direction (from trust anchor to target) or in the "forward" direction
* (from target to trust anchor). All CertChainCheckers must support
* "reverse checking", while support for "forward checking" is optional. This
* function is used to determine in which direction the CertChainChecker
* expects the certificates to be presented.
*
* PARAMETERS:
* "checker"
* The CertChainChecker that has been initialized to expect certificates
* in either the "forward" or "reverse" directions. Must be non-NULL.
* "pForwardDirectionExpected"
* Destination of the Boolean result. Must be non-NULL.
* "plContext"
* Platform-specific context pointer.
* THREAD SAFETY:
* Thread Safe (see Thread Safety Definitions in Programmer's Guide)
* RETURNS:
* Returns NULL if the function succeeds.
* Returns a CertChainChecker Error if the function fails in a non-fatal way.
* Returns a Fatal Error if the function fails in an unrecoverable way.
*/
PKIX_Error *
PKIX_CertChainChecker_IsForwardDirectionExpected(
PKIX_CertChainChecker *checker,
PKIX_Boolean *pForwardDirectionExpected,
void *plContext);
/*
* FUNCTION: PKIX_CertChainChecker_GetSupportedExtensions
* DESCRIPTION:
*
* Retrieves a pointer to a List of OIDs (each OID corresponding to a
* certificate extension supported by the CertChainChecker pointed to by
* "checker") and stores it at "pExtensions". All certificate extensions that
* the CertChainChecker might possibly recognize and be able to process
* should be included in the List of supported extensions. If "checker" does
* not recognize or process any certificate extensions, this function stores
* NULL at "pExtensions".
*
* Note that the List returned by this function is immutable.
*
* PARAMETERS:
* "checker"
* Address of CertChainChecker whose supported extension OIDs are to be
* stored. Must be non-NULL.
* "pExtensions"
* Address where object pointer will be stored. Must be non-NULL.
* "plContext"
* Platform-specific context pointer.
* THREAD SAFETY:
* Thread Safe (see Thread Safety Definitions in Programmer's Guide)
* RETURNS:
* Returns NULL if the function succeeds.
* Returns a CertChainChecker Error if the function fails in a non-fatal way.
* Returns a Fatal Error if the function fails in an unrecoverable way.
*/
PKIX_Error *
PKIX_CertChainChecker_GetSupportedExtensions(
PKIX_CertChainChecker *checker,
PKIX_List **pExtensions, /* list of PKIX_PL_OID */
void *plContext);
/*
* FUNCTION: PKIX_CertChainChecker_GetCertChainCheckerState
* DESCRIPTION:
*
* Retrieves a pointer to a PKIX_PL_Object representing the internal state
* (if any) of the CertChainChecker pointed to by "checker" and stores it at
* "pCertChainCheckerState".
*
* PARAMETERS:
* "checker"
* Address of CertChainChecker whose state is to be stored.
* Must be non-NULL.
* "pCertChainCheckerState"
* Address where object pointer will be stored. Must be non-NULL.
* "plContext"
* Platform-specific context pointer.
* THREAD SAFETY:
* Conditionally Thread Safe
* (see Thread Safety Definitions in Programmer's Guide)
* RETURNS:
* Returns NULL if the function succeeds.
* Returns a CertChainChecker Error if the function fails in a non-fatal way.
* Returns a Fatal Error if the function fails in an unrecoverable way.
*/
PKIX_Error *
PKIX_CertChainChecker_GetCertChainCheckerState(
PKIX_CertChainChecker *checker,
PKIX_PL_Object **pCertChainCheckerState,
void *plContext);
/*
* FUNCTION: PKIX_CertChainChecker_SetCertChainCheckerState
* DESCRIPTION:
*
* Sets the internal state of the CertChainChecker pointed to by "checker"
* using the Object pointed to by "certChainCheckerState". If "checker" needs
* a NULL internal state, "certChainCheckerState" should be set to NULL.
*
* PARAMETERS:
* "checker"
* Address of CertChainChecker whose state is to be set. Must be non-NULL.
* "certChainCheckerState"
* Address of Object representing internal state.
* "plContext"
* Platform-specific context pointer.
* THREAD SAFETY:
* Not Thread Safe - assumes exclusive access to "checker"
* (see Thread Safety Definitions in Programmer's Guide)
* RETURNS:
* Returns NULL if the function succeeds.
* Returns a CertChainChecker Error if the function fails in a non-fatal way.
* Returns a Fatal Error if the function fails in an unrecoverable way.
*/
PKIX_Error *
PKIX_CertChainChecker_SetCertChainCheckerState(
PKIX_CertChainChecker *checker,
PKIX_PL_Object *certChainCheckerState,
void *plContext);
#ifdef __cplusplus
}
#endif
#endif /* _PKIX_CHECKER_H */