RetroZilla/xpinstall/packager/os2/makeall.pl
2015-10-20 23:03:22 -04:00

805 lines
27 KiB
Perl

#!c:\perl\bin\perl
#
# ***** BEGIN LICENSE BLOCK *****
# Version: MPL 1.1/GPL 2.0/LGPL 2.1
#
# The contents of this file are subject to the Mozilla Public License Version
# 1.1 (the "License"); you may not use this file except in compliance with
# the License. You may obtain a copy of the License at
# http://www.mozilla.org/MPL/
#
# Software distributed under the License is distributed on an "AS IS" basis,
# WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
# for the specific language governing rights and limitations under the
# License.
#
# The Original Code is Mozilla Communicator client code, released
# March 31, 1998.
#
# The Initial Developer of the Original Code is
# Netscape Communications Corporation.
# Portions created by the Initial Developer are Copyright (C) 1998-1999
# the Initial Developer. All Rights Reserved.
#
# Contributor(s):
# Sean Su <ssu@netscape.com>
#
# Alternatively, the contents of this file may be used under the terms of
# either of the GNU General Public License Version 2 or later (the "GPL"),
# or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
# in which case the provisions of the GPL or the LGPL are applicable instead
# of those above. If you wish to allow use of your version of this file only
# under the terms of either the GPL or the LGPL, and not to allow others to
# use your version of this file under the terms of the MPL, indicate your
# decision by deleting the provisions above and replace them with the notice
# and other provisions required by the GPL or the LGPL. If you do not delete
# the provisions above, a recipient may use your version of this file under
# the terms of any one of the MPL, the GPL or the LGPL.
#
# ***** END LICENSE BLOCK *****
#
# This perl script builds the xpi, config.ini, and js files.
#
use Cwd;
use File::Copy;
use File::Path;
use File::Basename;
$DEPTH = "../../..";
$topsrcdir = GetTopSrcDir();
# ensure that Packager.pm is in @INC, since we might not be called from
# mozilla/xpinstall/packager
push(@INC, "$topsrcdir/xpinstall/packager");
require StageUtils;
require "$topsrcdir/config/zipcfunc.pl";
ParseArgv(@ARGV);
$topobjdir = "$topsrcdir" if !defined($topobjdir);
$inStagePath = "$topobjdir/stage" if !defined($inStagePath);
$inDistPath = "$topobjdir/dist" if !defined($inDistPath);
$inXpiURL = "ftp://not.supplied.invalid" if !defined($inXpiURL);
$inRedirIniURL = $inXpiURL if !defined($inRedirIniURL);
$inInstName = "seamonkey-os2-installer" if !defined($inInstName);
$inStubName = "seamonkey-os2-stub-installer" if !defined($inStubName);
$seiFileNameGeneric = "stubinstall.exe";
$seiFileNameSpecific = "$inInstName.exe";
$seiStubRootName = $inStubName;
$seiFileNameSpecificStub = "$seiStubRootName.exe";
$seuFileNameSpecific = "SeaMonkeyUninstall.exe";
$seuzFileNameSpecific = "seamonkeyuninstall.zip";
$seiGreFileNameSpecific = "gre-os2-installer.exe";
$seizGreFileNameSpecific = "gre-os2-installer.zip";
$seiFileNameGenericRes = "stubinstall.res";
$seiFileNameSpecificRes = "$inInstName.res";
$seiFileNameSpecificRC = "$inInstName.rc";
$seiFileNameSpecificStubRC = "$seiStubRootName.rc";
$seiFileNameSpecificStubRes = "$seiStubRootName.res";
$seuFileNameSpecificRes = "SeaMonkeyUninstall.res";
$seuFileNameSpecificRC = "SeaMonkeyUninstall.rc";
if(defined($ENV{DEBUG_INSTALLER_BUILD}))
{
print " os2/makeall.pl\n";
print " topobjdir : $topobjdir\n";
print " topsrcdir : $topsrcdir\n";
print " inStagePath: $inStagePath\n";
print " inDistPath : $inDistPath\n";
}
$gDefaultProductVersion = StageUtils::GetProductY2KVersion($topobjdir, $topsrcdir, $topsrcdir);
print "\n";
print " Building SeaMonkey\n";
print " Raw version id : $gDefaultProductVersion\n";
# $gDefaultProductVersion has the form maj.min.release.bld where maj, min, release
# and bld are numerics representing version information.
# Other variables need to use parts of the version info also so we'll
# split out the dot separated values into the array @versionParts
# such that:
#
# $versionParts[0] = maj
# $versionParts[1] = min
# $versionParts[2] = release
# $versionParts[3] = bld
@versionParts = split /\./, $gDefaultProductVersion;
# We allow non-numeric characters to be included as the last
# characters in fields of $gDefaultProductVersion for display purposes (mostly to
# show that we have moved past a certain version by adding a '+'
# character). Non-numerics must be stripped out of $gDefaultProductVersion,
# however, since this variable is used to identify the the product
# for comparison with other installations, so the values in each field
# must be numeric only:
$gDefaultProductVersion =~ s/[^0-9.][^.]*//g;
# set environment vars for use by other .pl scripts called from this script.
if($versionParts[2] eq "0")
{
$versionMain = "$versionParts[0].$versionParts[1]";
}
else
{
$versionMain = "$versionParts[0].$versionParts[1].$versionParts[2]";
}
print " Display version : $versionMain\n";
print " Xpinstall version: $gDefaultProductVersion\n";
print "\n";
$gDirPackager = "$topsrcdir/xpinstall/packager";
$gDirStageProduct = "$inStagePath/mozilla";
$gDirDistInstall = "$inDistPath/install";
$gDirDistInstGre = "$inDistPath/inst_gre";
# Build GRE installer package first before building Mozilla! GRE installer is required by the mozilla installer.
#if(system("perl \"$gDirPackager/win_gre/makeall.pl\" -objDir \"$topobjdir\" -stagePath \"$inStagePath\" -distPath \"$inDistPath\" -aurl $inXpiURL -rurl $inRedirIniURL"))
#{
# die "\n Error: perl \"$gDirPackager/win_gre/makeall.pl\" -objDir \"$topobjdir\" -stagePath \"$inStagePath\" -distPath \"$inDistPath\" -aurl $inXpiURL -rurl $inRedirIniURL\n";
#}
if(defined($ENV{DEBUG_INSTALLER_BUILD}))
{
print " back in os2/makeall.pl\n";
print " inStagePath: $inStagePath\n";
print " inDistPath : $inDistPath\n";
}
# Create the stage area here.
# If -sd is not used, the default stage dir will be: $topobjdir/stage
if(system("perl \"$gDirPackager/make_stage.pl\" -pn mozilla -os os2 -sd \"$inStagePath\" -dd \"$inDistPath\""))
{
die "\n Error: perl \"$gDirPackager/make_stage.pl\" -pn mozilla -os os2 -sd \"$inStagePath\" -dd \"$inDistPath\"\n";
}
# Copy the GRE installer to the Ns' stage area
#if(!(-e "$gDirDistInstGre/$seiGreFileNameSpecific"))
#{
# die "\"$gDirDistInstGre/$seiGreFileNameSpecific\": file missing\n";
#}
#mkdir "$gDirStageProduct/gre";
#copy("$gDirDistInstGre/$seiGreFileNameSpecific", "$gDirStageProduct/gre") ||
# die "copy(\"$gDirDistInstGre/$seiGreFileNameSpecific\", \"$gDirStageProduct/gre\"): $!\n";
$versionLanguage = "en";
$ENV{WIZ_nameCompany} = "mozilla.org";
$ENV{WIZ_nameProduct} = "SeaMonkey";
$ENV{WIZ_nameProductInternal} = "SeaMonkey"; # product name without the version string
$ENV{WIZ_fileMainExe} = "seamonkey.exe";
$ENV{WIZ_fileUninstall} = $seuFileNameSpecific;
$ENV{WIZ_fileUninstallZip} = $seuzFileNameSpecific;
# The following variables are for displaying version info in the
# the installer.
$ENV{WIZ_userAgent} = "$versionMain ($versionLanguage)";
$ENV{WIZ_userAgentShort} = "$versionMain";
$ENV{WIZ_xpinstallVersion} = "$gDefaultProductVersion";
$ENV{WIZ_distInstallPath} = "$gDirDistInstall";
# GetProductBuildID() will return the build id for GRE located here:
# NS_BUILD_ID in nsBuildID.h: 2003030610
$ENV{WIZ_greBuildID} = StageUtils::GetProductBuildID("$inDistPath/include/nsBuildID.h", "NS_BUILD_ID");
# GetGreFileVersion() will return the actual version of xpcom.dll used by GRE.
# ie:
# given milestone.txt : 1.4a
# given nsBuildID.h : 2003030610
# gre version would be: 1.4.20030.30610
$ENV{WIZ_greFileVersion} = StageUtils::GetGreFileVersion($topobjdir, $topsrcdir);
# GetGreSpecialID() will return the GRE ID to be used in the windows registry.
# This ID is also the same one being querried for by the seamonkey glue code.
# ie:
# given milestone.txt : 1.4a
# given nsBuildID.h : 2003030610
# gre special ID would be: 1.4a_2003030610
$ENV{WIZ_greUniqueID} = StageUtils::GetGreSpecialID($topobjdir);
print "\n";
print " GRE build id : $ENV{WIZ_greBuildID}\n";
print " GRE file version : $ENV{WIZ_greFileVersion}\n";
print " GRE special version: $ENV{WIZ_greUniqueID}\n";
print "\n";
print " Building $ENV{WIZ_nameProduct} $ENV{WIZ_userAgent}...\n";
print "\n";
# Check for existence of staging path
if(!(-d "$gDirStageProduct"))
{
die "\n Invalid path: $gDirStageProduct\n";
}
# List of components for to create xpi files from
@gComponentList = ("xpcom",
"browser",
"mail",
"spellcheck",
"psm",
"chatzilla",
"deflenus",
"langenus",
"regus",
"venkman",
"inspector",
"reporter",
"sroaming");
if(VerifyComponents()) # return value of 0 means no errors encountered
{
exit(1);
}
# Make sure gDirDistInstall exists
if(!(-d "$gDirDistInstall"))
{
mkdir ("$gDirDistInstall",0775);
}
if(-d "$gDirDistInstall/xpi")
{
unlink <$gDirDistInstall/xpi/*>;
}
else
{
mkdir ("$gDirDistInstall/xpi",0775);
}
if(-d "$gDirDistInstall/uninstall")
{
unlink <$gDirDistInstall/uninstall/*>;
}
else
{
mkdir ("$gDirDistInstall/uninstall",0775);
}
if(-d "$gDirDistInstall/setup")
{
unlink <$gDirDistInstall/setup/*>;
}
else
{
mkdir ("$gDirDistInstall/setup",0775);
}
#if(!(-e "$inDistPath/inst_gre/$seiGreFileNameSpecific"))
#{
# die "\"$inDistPath/inst_gre/$seiGreFileNameSpecific\": file missing\n";
#}
#MakeExeZip("$inDistPath/inst_gre", $seiGreFileNameSpecific, $seizGreFileNameSpecific);
if(MakeXpiFile())
{
exit(1);
}
if(MakeUninstall())
{
exit(1);
}
if(MakeConfigFile())
{
exit(1);
}
# Copy the setup files to the dist setup directory.
os2copy("install.ini", "$gDirDistInstall") ||
die "copy install.ini $gDirDistInstall: $!\n";
os2copy("install.ini", "$gDirDistInstall/setup") ||
die "copy install.ini $gDirDistInstall/setup: $!\n";
os2copy("config.ini", "$gDirDistInstall") ||
die "copy config.ini $gDirDistInstall: $!\n";
os2copy("config.ini", "$gDirDistInstall/setup") ||
die "copy config.ini $gDirDistInstall/setup: $!\n";
os2copy("$gDirDistInstall/setup.exe", "$gDirDistInstall/setup") ||
die "copy $gDirDistInstall/setup.exe $gDirDistInstall/setup: $!\n";
os2copy("$gDirDistInstall/setuprsc.dll", "$gDirDistInstall/setup") ||
die "copy $gDirDistInstall/setuprsc.dll $gDirDistInstall/setup: $!\n";
# copy license file for the installer
os2copy("$topsrcdir/LICENSE", "$gDirDistInstall/license.txt") ||
die "copy $topsrcdir/LICENSE $gDirDistInstall/license.txt: $!\n";
os2copy("$topsrcdir/LICENSE", "$gDirDistInstall/setup/license.txt") ||
die "copy $topsrcdir/LICENSE $gDirDistInstall/setup/license.txt: $!\n";
# copy the lean installer to stub\ dir
print "\n****************************\n";
print "* *\n";
print "* creating Stub files... *\n";
print "* *\n";
print "****************************\n";
print "\n $gDirDistInstall/stub/$seiFileNameSpecificStub\n";
# build the self-extracting .exe (installer) file.
os2copy("$gDirDistInstall/$seiFileNameGeneric", "$gDirDistInstall/$seiFileNameSpecificStub") ||
die "copy $gDirDistInstall/$seiFileNameGeneric $gDirDistInstall/$seiFileNameSpecificStub: $!\n";
os2copy("$gDirDistInstall/$seiFileNameGenericRes", "$gDirDistInstall/$seiFileNameSpecificStubRes") ||
die "copy $gDirDistInstall/$seiFileNameGenericRes $gDirDistInstall/$seiFileNameSpecificStubRes: $!\n";
@stubFiles = <$gDirDistInstall/setup/*.*>;
$size = (-s "$gDirDistInstall/$seiFileNameSpecificStubRes");
truncate("$gDirDistInstall/$seiFileNameSpecificStubRes", "$size-1");
open(OUTPUTFILE, ">$gDirDistInstall/$seiFileNameSpecificStubRC");
print OUTPUTFILE "#include <os2.h>\n";
print OUTPUTFILE "STRINGTABLE DISCARDABLE\n";
print OUTPUTFILE "BEGIN\n";
$currentResourceID = 10000+1;
foreach $entry ( @stubFiles )
{
$filename = basename($entry);
print OUTPUTFILE "$currentResourceID \"$filename\"\n";
$currentResourceID++;
}
print OUTPUTFILE "END\n";
$currentResourceID = 10000+1;
foreach $entry ( @stubFiles )
{
print OUTPUTFILE "RESOURCE RT_RCDATA $currentResourceID \"$entry\"\n";
$currentResourceID++;
}
close(OUTPUTFILE);
if(defined($ENV{DEBUG_INSTALLER_BUILD}))
{
print "rc -r $gDirDistInstall/$seiFileNameSpecificStubRC $gDirDistInstall/temp.res\n";
}
system("rc -r $gDirDistInstall/$seiFileNameSpecificStubRC $gDirDistInstall/temp.res");
if(defined($ENV{DEBUG_INSTALLER_BUILD}))
{
print "cat $gDirDistInstall/$seiFileNameSpecificStubRes $gDirDistInstall/temp.res > $gDirDistInstall/new.res\n";
}
system("cat $gDirDistInstall/$seiFileNameSpecificStubRes $gDirDistInstall/temp.res > $gDirDistInstall/new.res");
unlink("$gDirDistInstall/$seiFileNameSpecificStubRes");
rename("$gDirDistInstall/new.res", "$gDirDistInstall/$seiFileNameSpecificStubRes");
unlink("$gDirDistInstall/temp.res");
system("rc $gDirDistInstall/$seiFileNameSpecificStubRes $gDirDistInstall/$seiFileNameSpecificStub");
if(-d "$gDirDistInstall/stub")
{
unlink <$gDirDistInstall/stub/*>;
}
else
{
mkdir ("$gDirDistInstall/stub",0775);
}
os2copy("$gDirDistInstall/$seiFileNameSpecificStub", "$gDirDistInstall/stub") ||
die "copy $gDirDistInstall/$seiFileNameSpecificStub $gDirDistInstall/stub: $!\n";
# create the xpi for launching the stub installer
print "\n************************************\n";
print "* *\n";
print "* creating stub installer xpi... *\n";
print "* *\n";
print "************************************\n";
print "\n $gDirDistInstall/$seiStubRootName.xpi\n\n";
if(-d "$gDirStageProduct/$seiStubRootName")
{
unlink <$gDirStageProduct/$seiStubRootName/*>;
}
else
{
mkdir ("$gDirStageProduct/$seiStubRootName",0775);
}
os2copy("$gDirDistInstall/stub/$seiFileNameSpecificStub", "$gDirStageProduct/$seiStubRootName") ||
die "copy $gDirDistInstall/stub/$seiFileNameSpecificStub $gDirStageProduct/$seiStubRootName: $!\n";
# Make .js files
if(MakeJsFile($seiStubRootName))
{
return(1);
}
# Make .xpi file
if(system("perl makexpi.pl $seiStubRootName $gDirStageProduct $gDirDistInstall"))
{
print "\n Error: perl makexpi.pl $seiStubRootName $gDirStageProduct $gDirDistInstall\n";
return(1);
}
# group files for CD
print "\n************************************\n";
print "* *\n";
print "* creating Compact Disk files... *\n";
print "* *\n";
print "************************************\n";
print "\n $gDirDistInstall/cd\n";
if(-d "$gDirDistInstall/cd")
{
unlink <$gDirDistInstall/cd/*>;
}
else
{
mkdir ("$gDirDistInstall/cd",0775);
}
os2copy("$gDirDistInstall/$seiFileNameSpecificStub", "$gDirDistInstall/cd") ||
die "copy $gDirDistInstall/$seiFileNameSpecificStub $gDirDistInstall/cd: $!\n";
StageUtils::CopyFiles("$gDirDistInstall/xpi", "$gDirDistInstall/cd");
# create the big self extracting .exe installer
print "\n**************************************************************\n";
print "* *\n";
print "* creating Self Extracting Executable Full Install file... *\n";
print "* *\n";
print "**************************************************************\n";
print "\n $gDirDistInstall/$seiFileNameSpecific\n";
if(-d "$gDirDistInstall/sea")
{
unlink <$gDirDistInstall/sea/*>;
}
else
{
mkdir ("$gDirDistInstall/sea",0775);
}
os2copy("$gDirDistInstall/$seiFileNameGeneric", "$gDirDistInstall/$seiFileNameSpecific") ||
die "copy $gDirDistInstall/$seiFileNameGeneric $gDirDistInstall/$seiFileNameSpecific: $!\n";
os2copy("$gDirDistInstall/$seiFileNameGenericRes", "$gDirDistInstall/$seiFileNameSpecificRes") ||
die "copy $gDirDistInstall/$seiFileNameGenericRes $gDirDistInstall/$seiFileNameSpecificRes: $!\n";
@stubFiles = <$gDirDistInstall/setup/*.*>;
@xpiFiles = <$gDirDistInstall/xpi/*.*>;
$size = (-s "$gDirDistInstall/$seiFileNameSpecificRes");
truncate("$gDirDistInstall/$seiFileNameSpecificRes", "$size-1");
open(OUTPUTFILE, ">$gDirDistInstall/$seiFileNameSpecificRC");
print OUTPUTFILE "#include <os2.h>\n";
print OUTPUTFILE "STRINGTABLE DISCARDABLE\n";
print OUTPUTFILE "BEGIN\n";
$currentResourceID = 10000+1;
foreach $entry ( @stubFiles )
{
$filename = basename($entry);
print OUTPUTFILE "$currentResourceID \"$filename\"\n";
$currentResourceID++;
}
foreach $entry ( @xpiFiles )
{
$filename = basename($entry);
print OUTPUTFILE "$currentResourceID \"$filename\"\n";
$currentResourceID++;
}
print OUTPUTFILE "END\n";
$currentResourceID = 10000+1;
foreach $entry ( @stubFiles )
{
print OUTPUTFILE "RESOURCE RT_RCDATA $currentResourceID \"$entry\"\n";
$currentResourceID++;
}
foreach $entry ( @xpiFiles )
{
print OUTPUTFILE "RESOURCE RT_RCDATA $currentResourceID \"$entry\"\n";
$currentResourceID++;
}
close(OUTPUTFILE);
system("rc -r $gDirDistInstall/$seiFileNameSpecificRC $gDirDistInstall/temp.res");
system("cat $gDirDistInstall/$seiFileNameSpecificRes $gDirDistInstall/temp.res > $gDirDistInstall/new.res");
unlink("$gDirDistInstall/$seiFileNameSpecificRes");
rename("$gDirDistInstall/new.res", "$gDirDistInstall/$seiFileNameSpecificRes");
unlink("$gDirDistInstall/temp.res");
system("rc $gDirDistInstall/$seiFileNameSpecificRes $gDirDistInstall/$seiFileNameSpecific");
os2copy("$gDirDistInstall/$seiFileNameSpecific", "$gDirDistInstall/sea") ||
die "copy $gDirDistInstall/$seiFileNameSpecific $gDirDistInstall/sea: $!\n";
unlink <$gDirDistInstall/$seiFileNameSpecificStub>;
print " done!\n\n";
# end of script
exit(0);
sub MakeExeZip
{
my($aSrcDir, $aExeFile, $aZipFile) = @_;
my($saveCwdir);
$saveCwdir = cwd();
chdir($aSrcDir);
if(system("zip $gDirDistInstall/xpi/$aZipFile $aExeFile"))
{
chdir($saveCwdir);
die "\n Error: zip $gDirDistInstall/xpi/$aZipFile $aExeFile";
}
chdir($saveCwdir);
}
sub PrintUsage
{
die "usage: $0 [options]
options include:
-objDir <path> : path to the objdir. default is topsrcdir
-stagePath <staging path> : full path to where the mozilla components are staged at
Default stage path, if this is not set, is:
[mozilla]/stage
-distPath <dist path> : full path to where the mozilla dist dir is at.
Default stage path, if this is not set, is:
[mozilla]/dist
-aurl <archive url> : either ftp:// or http:// url to where the
archives (.xpi, .exe, .zip, etc...) reside
-rurl <redirect.ini url> : either ftp:// or http:// url to where the
redirec.ini resides. If not supplied, it
will be assumed to be the same as archive
url.
-instname <filename base> : the base of the filename to be used for
the installer, e.g.
mozilla-1.8b2.en-US.os2.installer
(.exe will be appended in any case)
-stubname <filename base> : the base of the filename to be used for
the stub installer, e.g.
mozilla-1.8b2.en-US.os2.stub-installer
(.exe will be appended in any case)
\n";
}
sub ParseArgv
{
my(@myArgv) = @_;
my($counter);
for($counter = 0; $counter <= $#myArgv; $counter++)
{
if($myArgv[$counter] =~ /^[-,\/]h$/i)
{
PrintUsage();
}
elsif($myArgv[$counter] =~ /^[-,\/]objDir$/i)
{
if($#myArgv >= ($counter + 1))
{
++$counter;
$topobjdir = $myArgv[$counter];
$topobjdir =~ s/\\/\//g;
}
}
elsif($myArgv[$counter] =~ /^[-,\/]stagePath$/i)
{
if($#myArgv >= ($counter + 1))
{
++$counter;
$inStagePath = $myArgv[$counter];
$inStagePath =~ s/\\/\//g;
}
}
elsif($myArgv[$counter] =~ /^[-,\/]distPath$/i)
{
if($#myArgv >= ($counter + 1))
{
++$counter;
$inDistPath = $myArgv[$counter];
$inDistPath =~ s/\\/\//g;
}
}
elsif($myArgv[$counter] =~ /^[-,\/]aurl$/i)
{
if($#myArgv >= ($counter + 1))
{
++$counter;
$inXpiURL = $myArgv[$counter];
$inRedirIniURL = $inXpiURL;
}
}
elsif($myArgv[$counter] =~ /^[-,\/]rurl$/i)
{
if($#myArgv >= ($counter + 1))
{
++$counter;
$inRedirIniURL = $myArgv[$counter];
}
}
elsif($myArgv[$counter] =~ /^[-,\/]instname$/i)
{
if($#myArgv >= ($counter + 1))
{
++$counter;
$inInstName = $myArgv[$counter];
}
}
elsif($myArgv[$counter] =~ /^[-,\/]stubname$/i)
{
if($#myArgv >= ($counter + 1))
{
++$counter;
$inStubName = $myArgv[$counter];
}
}
}
}
sub MakeConfigFile
{
chdir("$gDirPackager/os2");
# Make config.ini file
if(system("perl makecfgini.pl config.it $gDefaultProductVersion $gDirStageProduct $gDirDistInstall/xpi $inRedirIniURL $inXpiURL"))
{
print "\n Error: perl makecfgini.pl config.it $gDefaultProductVersion $gDirStageProduct $gDirDistInstall/xpi $inRedirIniURL $inXpiURL\n";
return(1);
}
# Make install.ini file
if(system("perl makecfgini.pl install.it $gDefaultProductVersion $gDirStageProduct $gDirDistInstall/xpi $inRedirIniURL $inXpiURL"))
{
print "\n Error: perl makecfgini.pl install.it $gDefaultProductVersion $gDirStageProduct $gDirDistInstall/xpi $inRedirIniURL $inXpiURL\n";
return(1);
}
return(0);
}
sub MakeUninstall
{
chdir("$gDirPackager/os2");
if(MakeUninstallIniFile())
{
return(1);
}
# Copy the uninstall files to the dist uninstall directory.
os2copy("uninstall.ini", "$gDirDistInstall") ||
die "copy uninstall.ini $gDirDistInstall: $!\n";
os2copy("uninstall.ini", "$gDirDistInstall/uninstall") ||
die "copy uninstall.ini $gDirDistInstall/uninstall: $!\n";
os2copy("$gDirDistInstall/uninstall.exe", "$gDirDistInstall/uninstall") ||
die "copy $gDirDistInstall/uninstall.exe $gDirDistInstall/uninstall: $!\n";
# build the self-extracting .exe (uninstaller) file.
print "\nbuilding self-extracting uninstaller ($seuFileNameSpecific)...\n";
os2copy("$gDirDistInstall/$seiFileNameGeneric", "$gDirDistInstall/$seuFileNameSpecific") ||
die "copy $gDirDistInstall/$seiFileNameGeneric $gDirDistInstall/$seuFileNameSpecific: $!\n";
print "copy $gDirDistInstall/$seiFileNameGeneric $gDirDistInstall/$seuFileNameSpecific: $!\n";
print "copy $gDirDistInstall/$seiFileNameGeneric $gDirDistInstall/$seuFileNameSpecific: $!\n";
print "copy $gDirDistInstall/$seiFileNameGeneric $gDirDistInstall/$seuFileNameSpecific: $!\n";
os2copy("$gDirDistInstall/$seiFileNameGenericRes", "$gDirDistInstall/$seuFileNameSpecificRes") ||
die "copy $gDirDistInstall/$seiFileNameGenericRes $gDirDistInstall/$seuFileNameSpecificRes: $!\n";
print "copy $gDirDistInstall/$seiFileNameGenericRes $gDirDistInstall/$seuFileNameSpecificRes: $!\n";
print "copy $gDirDistInstall/$seiFileNameGenericRes $gDirDistInstall/$seuFileNameSpecificRes: $!\n";
print "copy $gDirDistInstall/$seiFileNameGenericRes $gDirDistInstall/$seuFileNameSpecificRes: $!\n";
@stubFiles = <$gDirDistInstall/uninstall/*.*>;
$size = (-s "$gDirDistInstall/$seuFileNameSpecificRes");
truncate("$gDirDistInstall/$seuFileNameSpecificRes", "$size-1");
open(OUTPUTFILE, ">$gDirDistInstall/$seuFileNameSpecificRC");
print OUTPUTFILE "#include <os2.h>\n";
print OUTPUTFILE "STRINGTABLE DISCARDABLE\n";
print OUTPUTFILE "BEGIN\n";
$currentResourceID = 10000+1;
foreach $entry ( @stubFiles )
{
$filename = basename($entry);
print OUTPUTFILE "$currentResourceID \"$filename\"\n";
$currentResourceID++;
}
print OUTPUTFILE "END\n";
$currentResourceID = 10000+1;
foreach $entry ( @stubFiles )
{
print OUTPUTFILE "RESOURCE RT_RCDATA $currentResourceID \"$entry\"\n";
$currentResourceID++;
}
close(OUTPUTFILE);
system("rc -r $gDirDistInstall/$seuFileNameSpecificRC $gDirDistInstall/temp.res");
system("cat $gDirDistInstall/$seuFileNameSpecificRes $gDirDistInstall/temp.res > $gDirDistInstall/new.res");
unlink("$gDirDistInstall/$seuFileNameSpecificRes");
rename("$gDirDistInstall/new.res", "$gDirDistInstall/$seuFileNameSpecificRes");
unlink("$gDirDistInstall/temp.res");
system("rc $gDirDistInstall/$seuFileNameSpecificRes $gDirDistInstall/$seuFileNameSpecific");
MakeExeZip($gDirDistInstall, $seuFileNameSpecific, $seuzFileNameSpecific);
unlink <$gDirDistInstall/$seuFileNameSpecific>;
return(0);
}
sub MakeUninstallIniFile
{
# Make config.ini file
if(system("perl makeuninstallini.pl uninstall.it $gDefaultProductVersion"))
{
print "\n Error: perl makeuninstallini.pl uninstall.it $gDefaultProductVersion\n";
return(1);
}
return(0);
}
sub MakeJsFile
{
my($mComponent) = @_;
# Make .js file
chdir("$gDirPackager/os2");
if(system("perl makejs.pl $mComponent.jst $gDefaultProductVersion $gDirStageProduct/$mComponent"))
{
print "\n Error: perl makejs.pl $mComponent.jst $gDefaultProductVersion $gDirStageProduct/$mComponent\n";
return(1);
}
return(0);
}
sub MakeXpiFile
{
my($mComponent);
chdir("$gDirPackager/os2");
foreach $mComponent (@gComponentList)
{
# Make .js files
if(MakeJsFile($mComponent))
{
return(1);
}
# Make .xpi file
if(system("perl makexpi.pl $mComponent $gDirStageProduct $gDirDistInstall/xpi"))
{
print "\n Error: perl makexpi.pl $mComponent $gDirStageProduct $gDirDistInstall/xpi\n";
return(1);
}
}
return(0);
}
sub VerifyComponents()
{
my($mComponent);
my($mError) = 0;
print "\n Verifying existence of required components...\n";
foreach $mComponent (@gComponentList)
{
if($mComponent =~ /talkback/i)
{
print " place holder: $gDirStageProduct/$mComponent\n";
mkdir("$gDirStageProduct/$mComponent", 0775);
}
elsif(-d "$gDirStageProduct/$mComponent")
{
print " ok: $gDirStageProduct/$mComponent\n";
}
else
{
print " Error: $gDirStageProduct/$mComponent does not exist!\n";
$mError = 1;
}
}
print "\n";
return($mError);
}
sub GetTopSrcDir
{
my($rootDir) = dirname($0) . "/$DEPTH";
my($savedCwdDir) = cwd();
chdir($rootDir);
$rootDir = cwd();
chdir($savedCwdDir);
return($rootDir);
}
sub os2copy
{
my($source, $dest) = @_;
system("cp $source $dest");
return 1;
}