RetroZilla/parser/htmlparser/tests/logparse/logparse.cpp
2015-10-20 23:03:22 -04:00

240 lines
7.3 KiB
C++

/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is Mozilla Communicator client code.
*
* The Initial Developer of the Original Code is
* Netscape Communications Corporation.
* Portions created by the Initial Developer are Copyright (C) 1998
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
*
* Alternatively, the contents of this file may be used under the terms of
* either of the GNU General Public License Version 2 or later (the "GPL"),
* or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
#include "nsXPCOM.h"
#include "nsIComponentManager.h"
#include "nsParserCIID.h"
#include "nsIAtom.h"
#include "nsIParser.h"
#include "nsILoggingSink.h"
#include "nsIIOService.h"
#include "nsNetCID.h"
#include "nsIURI.h"
#include "CNavDTD.h"
#include <fstream.h>
// Class IID's
static NS_DEFINE_CID(kParserCID, NS_PARSER_CID);
static NS_DEFINE_IID(kLoggingSinkCID, NS_LOGGING_SINK_CID);
static NS_DEFINE_CID(kIOServiceCID, NS_IOSERVICE_CID);
// Interface IID's
//----------------------------------------------------------------------
static const char* kWorkingDir = "./";
nsresult GenerateBaselineFile(const char* aSourceFilename,const char* aBaselineFilename)
{
if (!aSourceFilename || !aBaselineFilename)
return NS_ERROR_INVALID_ARG;
nsresult rv;
// Create a parser
nsCOMPtr<nsIParser> parser(do_CreateInstance(kParserCID, &rv));
if (NS_FAILED(rv)) {
cout << "Unable to create a parser (" << rv << ")" <<endl;
return rv;
}
// Create a sink
nsCOMPtr<nsILoggingSink> sink(do_CreateInstance(kLoggingSinkCID, &rv));
if (NS_FAILED(rv)) {
cout << "Unable to create a sink (" << rv << ")" <<endl;
return rv;
}
nsCOMPtr<nsILocalFile> localfile (do_CreateInstance(NS_LOCAL_FILE_CONTRACTID, &rv));
if (NS_FAILED(rv))
return rv;
localfile->InitWithNativePath(nsDependentCString(aSourceFilename));
nsCOMPtr<nsIURI> inputURI;
{
nsCOMPtr<nsIIOService> ioService(do_GetService(kIOServiceCID, &rv));
if (NS_FAILED(rv))
return rv;
rv = ioService->NewFileURI(localfile, getter_AddRefs(inputURI));
if (NS_FAILED(rv))
return rv;
}
localfile->InitWithNativePath(nsDependentCString(aBaselineFilename));
PRFileDesc *outputfile;
localfile->OpenNSPRFileDesc(0660, PR_WRONLY | PR_CREATE_FILE, &outputfile);
sink->SetOutputStream(outputfile);
// Parse the document, having the sink write the data to fp
nsIDTD* dtd = nsnull;
NS_NewNavHTMLDTD(&dtd);
parser->RegisterDTD(dtd);
parser->SetContentSink(sink);
rv = parser->Parse(inputURI, 0, PR_FALSE, 0, eDTDMode_unknown);
return rv;
}
//----------------------------------------------------------------------
PRBool CompareFiles(const char* aFilename1, const char* aFilename2) {
PRBool result=PR_TRUE;
fstream theFirstStream(aFilename1,ios::in | ios::nocreate);
fstream theSecondStream(aFilename2,ios::in | ios::nocreate);
PRBool done=PR_FALSE;
char ch1,ch2;
while(!done) {
theFirstStream >> ch1;
theSecondStream >> ch2;
if(ch1!=ch2) {
result=PR_FALSE;
break;
}
done=PRBool((theFirstStream.ipfx(1)==0) || (theSecondStream.ipfx(1)==0));
}
return result;
}
//----------------------------------------------------------------------
void ComputeTempFilename(const char* anIndexFilename, char* aTempFilename) {
if(anIndexFilename) {
strcpy(aTempFilename,anIndexFilename);
char* pos=strrchr(aTempFilename,'\\');
if(!pos)
pos=strrchr(aTempFilename,'/');
if(pos) {
(*pos)=0;
strcat(aTempFilename,"/temp.blx");
return;
}
}
//fall back to our last resort...
strcpy(aTempFilename,"c:/windows/temp/temp.blx");
}
//----------------------------------------------------------------------
static const char* kAppName = "logparse ";
static const char* kOption1 = "Compare baseline file-set";
static const char* kOption2 = "Generate baseline ";
static const char* kResultMsg[2] = {" failed!"," ok."};
void ValidateBaselineFiles(const char* anIndexFilename) {
fstream theIndexFile(anIndexFilename,ios::in | ios::nocreate);
char theFilename[500];
char theBaselineFilename[500];
char theTempFilename[500];
PRBool done=PR_FALSE;
ComputeTempFilename(anIndexFilename,theTempFilename);
while(!done) {
theIndexFile >> theFilename;
theIndexFile >> theBaselineFilename;
if(theFilename[0] && theBaselineFilename[0]) {
if(NS_SUCCEEDED(GenerateBaselineFile(theFilename,theTempFilename))) {
PRBool matches=CompareFiles(theTempFilename,theBaselineFilename);
cout << theFilename << kResultMsg[matches] << endl;
}
}
theFilename[0]=0;
theBaselineFilename[0]=0;
done=PRBool(theIndexFile.ipfx(1)==0);
}
// Now it's time to compare our output to the baseline...
// if(!CompareFiles(aBaselineFilename,aBaselineFilename)){
// cout << "File: \"" << aSourceFilename << "\" does not match baseline." << endl;
// }
}
//----------------------------------------------------------------------
int main(int argc, char** argv)
{
if (argc < 2) {
cout << "Usage: " << kAppName << " [options] [filename]" << endl;
cout << " -c [filelist] " << kOption1 << endl;
cout << " -g [in] [out] " << kOption2 << endl;
return -1;
}
int result=0;
nsresult rv = NS_InitXPCOM2(nsnull, nsnull, nsnull);
if (NS_FAILED(rv)) {
printf("NS_InitXPCOM2 failed\n");
return 1;
}
if(0==strcmp("-c",argv[1])) {
if(argc>2) {
cout << kOption1 << "..." << endl;
//Open the master filelist, and read the filenames.
//Each line contains a source filename and a baseline filename, separated by a space.
ValidateBaselineFiles(argv[2]);
}
else {
cout << kAppName << ": Filelist missing for -c option -- nothing to do." << endl;
}
}
else if(0==strcmp("-g",argv[1])) {
if(argc>3) {
cout << kOption2 << argv[3] << " from " << argv[2] << "..." << endl;
GenerateBaselineFile(argv[2],argv[3]);
}
else {
cout << kAppName << ": Filename(s) missing for -g option -- nothing to do." << endl;
}
}
else {
cout << kAppName << ": Unknown options -- nothing to do." << endl;
}
return result;
}