RetroZilla/security/nss/lib/freebl/ecl/Makefile
2015-10-20 23:03:22 -04:00

231 lines
5.9 KiB
Makefile

#
# Makefile for elliptic curve library
# ***** BEGIN LICENSE BLOCK *****
# Version: MPL 1.1/GPL 2.0/LGPL 2.1
#
# The contents of this file are subject to the Mozilla Public License Version
# 1.1 (the "License"); you may not use this file except in compliance with
# the License. You may obtain a copy of the License at
# http://www.mozilla.org/MPL/
#
# Software distributed under the License is distributed on an "AS IS" basis,
# WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
# for the specific language governing rights and limitations under the
# License.
#
# The Original Code is the elliptic curve math library.
#
# The Initial Developer of the Original Code is
# Sun Microsystems, Inc.
# Portions created by the Initial Developer are Copyright (C) 2003
# the Initial Developer. All Rights Reserved.
#
# Contributor(s):
# Douglas Stebila <douglas@stebila.ca>
# Michael J. Fromberger <sting@linguist.dartmouth.edu>
# Netscape Communications Corporation
# Richard C. Swift (swift@netscape.com)
#
# Alternatively, the contents of this file may be used under the terms of
# either the GNU General Public License Version 2 or later (the "GPL"), or
# the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
# in which case the provisions of the GPL or the LGPL are applicable instead
# of those above. If you wish to allow use of your version of this file only
# under the terms of either the GPL or the LGPL, and not to allow others to
# use your version of this file under the terms of the MPL, indicate your
# decision by deleting the provisions above and replace them with the notice
# and other provisions required by the GPL or the LGPL. If you do not delete
# the provisions above, a recipient may use your version of this file under
# the terms of any one of the MPL, the GPL or the LGPL.
#
# ***** END LICENSE BLOCK *****
## Define CC to be the C compiler you wish to use. The GNU cc
## compiler (gcc) should work, at the very least
#CC=cc
#CC=gcc
##
## Define PERL to point to your local Perl interpreter. It
## should be Perl 5.x, although it's conceivable that Perl 4
## might work ... I haven't tested it.
##
#PERL=/usr/bin/perl
#PERL=perl
include ../mpi/target.mk
##
## Define platform-dependent variables for use of floating-point code.
##
ifeq ($(TARGET),v9SOLARIS)
ECL_USE_FP=1
else
ifeq ($(TARGET),v8plusSOLARIS)
ECL_USE_FP=1
else
ifeq ($(TARGET),v8SOLARIS)
ECL_USE_FP=1
else
ifeq ($(TARGET),x86LINUX)
ECL_USE_FP=1
endif
endif
endif
endif
##
## Add to definition of CFLAGS depending on use of floating-point code.
##
ifeq ($(ECL_USE_FP),1)
CFLAGS+= -DECL_USE_FP
endif
##
## Define LIBS to include any libraries you need to link against.
## If NO_TABLE is define, LIBS should include '-lm' or whatever is
## necessary to bring in the math library. Otherwise, it can be
## left alone, unless your system has other peculiar requirements.
##
LIBS=-L../mpi -lmpi -lm#-lmalloc#-lefence
##
## Define INCLUDES to include any include directories you need to
## compile with.
##
INCLUDES=-I../mpi
CFLAGS+= $(INCLUDES) $(XCFLAGS)
##
## Define RANLIB to be the library header randomizer; you might not
## need this on some systems (just set it to 'echo' on these systems,
## such as IRIX)
##
RANLIB=echo
##
## Define LIBOBJS to be the object files that will be created during
## the build process.
##
LIBOBJS = ecl.o ecl_curve.o ecl_mult.o ecl_gf.o \
ec2_aff.o ec2_mont.o ec2_proj.o \
ec2_163.o ec2_193.o ec2_233.o \
ecp_aff.o ecp_jac.o ecp_mont.o \
ec_naf.o ecp_jm.o \
ecp_192.o ecp_224.o ecp_256.o ecp_384.o ecp_521.o
ifeq ($(ECL_USE_FP),1)
LIBOBJS+= ecp_fp160.o ecp_fp192.o ecp_fp224.o ecp_fp.o
endif
## The headers contained in this library.
LIBHDRS = ecl-exp.h ecl.h ec2.h ecp.h ecl-priv.h ecl-curve.h
APPHDRS = ecl-exp.h ecl.h ec2.h ecp.h ecl-priv.h ecl-curve.h
ifeq ($(ECL_GFP_ASSEMBLY_FP),1)
LIBHDRS += ecp_fp.h
APPHDRS += ecp_fp.h
endif
help:
@ echo ""
@ echo "The following targets can be built with this Makefile:"
@ echo ""
@ echo "libecl.a - elliptic curve library"
@ echo "tests - build command line tests"
@ echo "test - run command line tests"
@ echo "clean - clean up objects and such"
@ echo ""
.SUFFIXES: .c .o .i
.c.i:
$(CC) $(CFLAGS) -E $< > $@
#---------------------------------------
$(LIBOBJS): $(LIBHDRS)
ecl.o: ecl.c $(LIBHDRS)
ecl_curve.o: ecl_curve.c $(LIBHDRS)
ecl_mult.o: ecl_mult.c $(LIBHDRS)
ecl_gf.o: ecl_gf.c $(LIBHDRS)
ec2_aff.o: ec2_aff.c $(LIBHDRS)
ec2_mont.o: ec2_mont.c $(LIBHDRS)
ec2_proj.o: ec2_proj.c $(LIBHDRS)
ec2_163.o: ec2_163.c $(LIBHDRS)
ec2_193.o: ec2_193.c $(LIBHDRS)
ec2_233.o: ec2_233.c $(LIBHDRS)
ecp_aff.o: ecp_aff.c $(LIBHDRS)
ecp_jac.o: ecp_jac.c $(LIBHDRS)
ecp_jm.o: ecp_jm.c $(LIBHDRS)
ecp_mont.o: ecp_mont.c $(LIBHDRS)
ecp_192.o: ecp_192.c $(LIBHDRS)
ecp_224.o: ecp_224.c $(LIBHDRS)
ecp_256.o: ecp_256.c $(LIBHDRS)
ecp_384.o: ecp_384.c $(LIBHDRS)
ecp_521.o: ecp_521.c $(LIBHDRS)
ecp_fp.o: ecp_fp.c $(LIBHDRS)
ifeq ($(ECL_USE_FP),1)
ecp_fp160.o: ecp_fp160.c ecp_fpinc.c $(LIBHDRS)
ecp_fp192.o: ecp_fp192.c ecp_fpinc.c $(LIBHDRS)
ecp_fp224.o: ecp_fp224.c ecp_fpinc.c $(LIBHDRS)
endif
libecl.a: $(LIBOBJS)
ar -cvr libecl.a $(LIBOBJS)
$(RANLIB) libecl.a
lib libs: libecl.a
ecl.i: ecl.h
#---------------------------------------
ECLTESTOBJS = ec2_test.o ecp_test.o ec_naft.o
ifeq ($(ECL_USE_FP),1)
ECLTESTOBJS+= ecp_fpt.o
endif
ECLTESTS = $(ECLTESTOBJS:.o=)
$(ECLTESTOBJS): %.o: tests/%.c $(LIBHDRS)
$(CC) $(CFLAGS) -o $@ -c $< $(INCLUDES)
$(ECLTESTS): %: %.o libecl.a
$(CC) $(CFLAGS) -o $@ $^ $(LIBS)
ifeq ($(ECL_USE_FP),1)
tests: ec2_test ecp_test ec_naft ecp_fpt
else
tests: ec2_test ecp_test ec_naft
endif
#---------------------------------------
ifeq ($(ECL_USE_FP),1)
test: tests
./ecp_test
./ec2_test
./ec_naft
./ecp_fpt
else
test: tests
./ecp_test
./ec_naft
./ec2_test
endif
#---------------------------------------
alltests: tests
clean:
rm -f *.o *.a *.i
rm -f core
rm -f *~ .*~
rm -f $(ECLTESTS)
clobber: clean
# END