RetroZilla/security/nss/tests/fips/fips.sh
2015-10-20 23:03:22 -04:00

320 lines
13 KiB
Bash

#! /bin/sh
#
# ***** BEGIN LICENSE BLOCK *****
# Version: MPL 1.1/GPL 2.0/LGPL 2.1
#
# The contents of this file are subject to the Mozilla Public License Version
# 1.1 (the "License"); you may not use this file except in compliance with
# the License. You may obtain a copy of the License at
# http://www.mozilla.org/MPL/
#
# Software distributed under the License is distributed on an "AS IS" basis,
# WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
# for the specific language governing rights and limitations under the
# License.
#
# The Original Code is the Netscape security libraries.
#
# The Initial Developer of the Original Code is
# Netscape Communications Corporation.
# Portions created by the Initial Developer are Copyright (C) 1994-2000
# the Initial Developer. All Rights Reserved.
#
# Contributor(s):
#
# Alternatively, the contents of this file may be used under the terms of
# either the GNU General Public License Version 2 or later (the "GPL"), or
# the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
# in which case the provisions of the GPL or the LGPL are applicable instead
# of those above. If you wish to allow use of your version of this file only
# under the terms of either the GPL or the LGPL, and not to allow others to
# use your version of this file under the terms of the MPL, indicate your
# decision by deleting the provisions above and replace them with the notice
# and other provisions required by the GPL or the LGPL. If you do not delete
# the provisions above, a recipient may use your version of this file under
# the terms of any one of the MPL, the GPL or the LGPL.
#
# ***** END LICENSE BLOCK *****
########################################################################
# mozilla/security/nss/tests/fips/fips.sh
#
# Script to test basic functionallity of NSS in FIPS-compliant mode
#
# needs to work on all Unix and Windows platforms
#
# tests implemented:
#
# special strings
# ---------------
#
########################################################################
############################## fips_init ##############################
# local shell function to initialize this script
########################################################################
fips_init()
{
SCRIPTNAME=fips.sh # sourced - $0 would point to all.sh
if [ -z "${CLEANUP}" ] ; then # if nobody else is responsible for
CLEANUP="${SCRIPTNAME}" # cleaning this script will do it
fi
if [ -z "${INIT_SOURCED}" -o "${INIT_SOURCED}" != "TRUE" ]; then
cd ../common
. ./init.sh
fi
if [ ! -r $CERT_LOG_FILE ]; then # we need certificates here
cd ../cert
. ./cert.sh
fi
SCRIPTNAME=fips.sh
html_head "FIPS 140 Compliance Tests"
grep "SUCCESS: FIPS passed" $CERT_LOG_FILE >/dev/null || {
Exit 15 "Fatal - FIPS of cert.sh needs to pass first"
}
COPYDIR=${FIPSDIR}/copydir
R_FIPSDIR=../fips
P_R_FIPSDIR=../fips
R_COPYDIR=../fips/copydir
if [ -n "${MULTIACCESS_DBM}" ]; then
P_R_FIPSDIR="multiaccess:${D_FIPS}"
fi
mkdir -p ${FIPSDIR}
mkdir -p ${COPYDIR}
cd ${FIPSDIR}
}
############################## fips_140 ##############################
# local shell function to test basic functionality of NSS while in
# FIPS 140 compliant mode
########################################################################
fips_140()
{
echo "$SCRIPTNAME: Verify this module is in FIPS mode -----------------"
echo "modutil -dbdir ${P_R_FIPSDIR} -list"
${BINDIR}/modutil -dbdir ${P_R_FIPSDIR} -list 2>&1
${BINDIR}/modutil -dbdir ${P_R_FIPSDIR} -chkfips true 2>&1
html_msg $? 0 "Verify this module is in FIPS mode (modutil -chkfips true)" "."
echo "$SCRIPTNAME: List the FIPS module certificates -----------------"
echo "certutil -d ${P_R_FIPSDIR} -L"
${BINDIR}/certutil -d ${P_R_FIPSDIR} -L 2>&1
html_msg $? 0 "List the FIPS module certificates (certutil -L)" "."
echo "$SCRIPTNAME: List the FIPS module keys -------------------------"
echo "certutil -d ${P_R_FIPSDIR} -K -f ${R_FIPSPWFILE}"
${BINDIR}/certutil -d ${P_R_FIPSDIR} -K -f ${R_FIPSPWFILE} 2>&1
html_msg $? 0 "List the FIPS module keys (certutil -K)" "."
echo "$SCRIPTNAME: Attempt to list FIPS module keys with incorrect password"
echo "certutil -d ${P_R_FIPSDIR} -K -f ${FIPSBADPWFILE}"
${BINDIR}/certutil -d ${P_R_FIPSDIR} -K -f ${FIPSBADPWFILE} 2>&1
RET=$?
html_msg $RET 255 "Attempt to list FIPS module keys with incorrect password (certutil -K)" "."
echo "certutil -K returned $RET"
echo "$SCRIPTNAME: Validate the certificate --------------------------"
echo "certutil -d ${P_R_FIPSDIR} -V -n ${FIPSCERTNICK} -u SR -e -f ${R_FIPSPWFILE}"
${BINDIR}/certutil -d ${P_R_FIPSDIR} -V -n ${FIPSCERTNICK} -u SR -e -f ${R_FIPSPWFILE}
html_msg $? 0 "Validate the certificate (certutil -V -e)" "."
echo "$SCRIPTNAME: Export the certificate and key as a PKCS#12 file --"
echo "pk12util -d ${P_R_FIPSDIR} -o fips140.p12 -n ${FIPSCERTNICK} -w ${R_FIPSP12PWFILE} -k ${R_FIPSPWFILE}"
${BINDIR}/pk12util -d ${P_R_FIPSDIR} -o fips140.p12 -n ${FIPSCERTNICK} -w ${R_FIPSP12PWFILE} -k ${R_FIPSPWFILE} 2>&1
html_msg $? 0 "Export the certificate and key as a PKCS#12 file (pk12util -o)" "."
echo "$SCRIPTNAME: Export the certificate as a DER-encoded file ------"
echo "certutil -d ${P_R_FIPSDIR} -L -n ${FIPSCERTNICK} -r -o fips140.crt"
${BINDIR}/certutil -d ${P_R_FIPSDIR} -L -n ${FIPSCERTNICK} -r -o fips140.crt 2>&1
html_msg $? 0 "Export the certificate as a DER (certutil -L -r)" "."
echo "$SCRIPTNAME: List the FIPS module certificates -----------------"
echo "certutil -d ${P_R_FIPSDIR} -L"
certs=`${BINDIR}/certutil -d ${P_R_FIPSDIR} -L 2>&1`
ret=$?
echo "${certs}"
if [ ${ret} -eq 0 ]; then
echo "${certs}" | grep FIPS_PUB_140_Test_Certificate > /dev/null
ret=$?
fi
html_msg $ret 0 "List the FIPS module certificates (certutil -L)" "."
echo "$SCRIPTNAME: Delete the certificate and key from the FIPS module"
echo "certutil -d ${P_R_FIPSDIR} -F -n ${FIPSCERTNICK} -f ${R_FIPSPWFILE}"
${BINDIR}/certutil -d ${P_R_FIPSDIR} -F -n ${FIPSCERTNICK} -f ${R_FIPSPWFILE} 2>&1
html_msg $? 0 "Delete the certificate and key from the FIPS module (certutil -F)" "."
echo "$SCRIPTNAME: List the FIPS module certificates -----------------"
echo "certutil -d ${P_R_FIPSDIR} -L"
certs=`${BINDIR}/certutil -d ${P_R_FIPSDIR} -L 2>&1`
ret=$?
echo "${certs}"
if [ ${ret} -eq 0 ]; then
echo "${certs}" | grep FIPS_PUB_140_Test_Certificate > /dev/null
if [ $? -eq 0 ]; then
ret=255
fi
fi
html_msg $ret 0 "List the FIPS module certificates (certutil -L)" "."
echo "$SCRIPTNAME: List the FIPS module keys."
echo "certutil -d ${P_R_FIPSDIR} -K -f ${R_FIPSPWFILE}"
${BINDIR}/certutil -d ${P_R_FIPSDIR} -K -f ${R_FIPSPWFILE} 2>&1
# certutil -K now returns a failure if no keys are found. This verifies that
# our delete succeded.
html_msg $? 255 "List the FIPS module keys (certutil -K)" "."
echo "$SCRIPTNAME: Import the certificate and key from the PKCS#12 file"
echo "pk12util -d ${P_R_FIPSDIR} -i fips140.p12 -w ${R_FIPSP12PWFILE} -k ${R_FIPSPWFILE}"
${BINDIR}/pk12util -d ${P_R_FIPSDIR} -i fips140.p12 -w ${R_FIPSP12PWFILE} -k ${R_FIPSPWFILE} 2>&1
html_msg $? 0 "Import the certificate and key from the PKCS#12 file (pk12util -i)" "."
echo "$SCRIPTNAME: List the FIPS module certificates -----------------"
echo "certutil -d ${P_R_FIPSDIR} -L"
certs=`${BINDIR}/certutil -d ${P_R_FIPSDIR} -L 2>&1`
ret=$?
echo "${certs}"
if [ ${ret} -eq 0 ]; then
echo "${certs}" | grep FIPS_PUB_140_Test_Certificate > /dev/null
ret=$?
fi
html_msg $ret 0 "List the FIPS module certificates (certutil -L)" "."
echo "$SCRIPTNAME: List the FIPS module keys --------------------------"
echo "certutil -d ${P_R_FIPSDIR} -K -f ${R_FIPSPWFILE}"
${BINDIR}/certutil -d ${P_R_FIPSDIR} -K -f ${R_FIPSPWFILE} 2>&1
html_msg $? 0 "List the FIPS module keys (certutil -K)" "."
echo "$SCRIPTNAME: Delete the certificate from the FIPS module"
echo "certutil -d ${P_R_FIPSDIR} -D -n ${FIPSCERTNICK}"
${BINDIR}/certutil -d ${P_R_FIPSDIR} -D -n ${FIPSCERTNICK} 2>&1
html_msg $? 0 "Delete the certificate from the FIPS module (certutil -D)" "."
echo "$SCRIPTNAME: List the FIPS module certificates -----------------"
echo "certutil -d ${P_R_FIPSDIR} -L"
certs=`${BINDIR}/certutil -d ${P_R_FIPSDIR} -L 2>&1`
ret=$?
echo "${certs}"
if [ ${ret} -eq 0 ]; then
echo "${certs}" | grep FIPS_PUB_140_Test_Certificate > /dev/null
if [ $? -eq 0 ]; then
ret=255
fi
fi
html_msg $ret 0 "List the FIPS module certificates (certutil -L)" "."
echo "$SCRIPTNAME: Import the certificate and key from the PKCS#12 file"
echo "pk12util -d ${P_R_FIPSDIR} -i fips140.p12 -w ${R_FIPSP12PWFILE} -k ${R_FIPSPWFILE}"
${BINDIR}/pk12util -d ${P_R_FIPSDIR} -i fips140.p12 -w ${R_FIPSP12PWFILE} -k ${R_FIPSPWFILE} 2>&1
html_msg $? 0 "Import the certificate and key from the PKCS#12 file (pk12util -i)" "."
echo "$SCRIPTNAME: List the FIPS module certificates -----------------"
echo "certutil -d ${P_R_FIPSDIR} -L"
certs=`${BINDIR}/certutil -d ${P_R_FIPSDIR} -L 2>&1`
ret=$?
echo "${certs}"
if [ ${ret} -eq 0 ]; then
echo "${certs}" | grep FIPS_PUB_140_Test_Certificate > /dev/null
ret=$?
fi
html_msg $ret 0 "List the FIPS module certificates (certutil -L)" "."
echo "$SCRIPTNAME: List the FIPS module keys --------------------------"
echo "certutil -d ${P_R_FIPSDIR} -K -f ${R_FIPSPWFILE}"
${BINDIR}/certutil -d ${P_R_FIPSDIR} -K -f ${R_FIPSPWFILE} 2>&1
html_msg $? 0 "List the FIPS module keys (certutil -K)" "."
echo "$SCRIPTNAME: Run PK11MODE in FIPSMODE -----------------"
echo "pk11mode -d ${P_R_FIPSDIR} -p fips- -f ${R_FIPSPWFILE}"
${BINDIR}/pk11mode -d ${P_R_FIPSDIR} -p fips- -f ${R_FIPSPWFILE} 2>&1
html_msg $? 0 "Run PK11MODE in FIPS mode (pk11mode)" "."
echo "$SCRIPTNAME: Run PK11MODE in Non FIPSMODE -----------------"
echo "pk11mode -d ${P_R_FIPSDIR} -p nonfips- -f ${R_FIPSPWFILE} -n"
${BINDIR}/pk11mode -d ${P_R_FIPSDIR} -p nonfips- -f ${R_FIPSPWFILE} -n 2>&1
html_msg $? 0 "Run PK11MODE in Non FIPS mode (pk11mode -n)" "."
LIBDIR="${DIST}/${OBJDIR}/lib"
MANGLEDIR="${FIPSDIR}/mangle"
# There are different versions of cp command on different systems, some of them
# copies only symlinks, others doesn't have option to disable links, so there
# is needed to copy files one by one.
echo "mkdir ${MANGLEDIR}"
mkdir ${MANGLEDIR}
for lib in `ls ${LIBDIR}`; do
echo "cp ${LIBDIR}/${lib} ${MANGLEDIR}"
cp ${LIBDIR}/${lib} ${MANGLEDIR}
done
echo "$SCRIPTNAME: Detect mangled database --------------------------"
SOFTOKEN=${MANGLEDIR}/${DLL_PREFIX}softokn3.${DLL_SUFFIX}
echo "mangling ${SOFTOKEN}"
echo "mangle -i ${SOFTOKEN} -o -8 -b 5"
${BINDIR}/mangle -i ${SOFTOKEN} -o -8 -b 5 2>&1
if [ $? -eq 0 ]; then
if [ "${OS_ARCH}" = "WINNT" ]; then
DBTEST=`which dbtest`
if [ "${OS_ARCH}" = "WINNT" -a "$OS_NAME" = "CYGWIN_NT" ]; then
DBTEST=`cygpath -m ${DBTEST}`
MANGLEDIR=`cygpath -u ${MANGLEDIR}`
fi
echo "PATH=${MANGLEDIR} ${DBTEST} -r -d ${P_R_FIPSDIR}"
PATH="${MANGLEDIR}" ${DBTEST} -r -d ${P_R_FIPSDIR} > ${TMP}/dbtestoutput.txt 2>&1
RESULT=$?
elif [ "${OS_ARCH}" = "HP-UX" ]; then
echo "SHLIB_PATH=${MANGLEDIR} dbtest -r -d ${P_R_FIPSDIR}"
LD_LIBRARY_PATH="" SHLIB_PATH="${MANGLEDIR}" ${BINDIR}/dbtest -r -d ${P_R_FIPSDIR} > ${TMP}/dbtestoutput.txt 2>&1
RESULT=$?
elif [ "${OS_ARCH}" = "AIX" ]; then
echo "LIBPATH=${MANGLEDIR} dbtest -r -d ${P_R_FIPSDIR}"
LIBPATH="${MANGLEDIR}" ${BINDIR}/dbtest -r -d ${P_R_FIPSDIR} > ${TMP}/dbtestoutput.txt 2>&1
RESULT=$?
elif [ "${OS_ARCH}" = "Darwin" ]; then
echo "DYLD_LIBRARY_PATH=${MANGLEDIR} dbtest -r -d ${P_R_FIPSDIR}"
DYLD_LIBRARY_PATH="${MANGLEDIR}" ${BINDIR}/dbtest -r -d ${P_R_FIPSDIR} > ${TMP}/dbtestoutput.txt 2>&1
RESULT=$?
else
echo "LD_LIBRARY_PATH=${MANGLEDIR} dbtest -r -d ${P_R_FIPSDIR}"
LD_LIBRARY_PATH="${MANGLEDIR}" ${BINDIR}/dbtest -r -d ${P_R_FIPSDIR} > ${TMP}/dbtestoutput.txt 2>&1
RESULT=$?
fi
html_msg ${RESULT} 46 "Init NSS with a corrupted library (dbtest -r)" "."
else
html_msg 0 0 "Skipping corruption test, can't open ${DLL_PREFIX}softokn3.${DLL_SUFFIX}"
fi
}
############################## fips_cleanup ############################
# local shell function to finish this script (no exit since it might be
# sourced)
########################################################################
fips_cleanup()
{
html "</TABLE><BR>"
cd ${QADIR}
. common/cleanup.sh
}
################## main #################################################
fips_init
fips_140
fips_cleanup
echo "fips.sh done"