RetroZilla/security/nss/tests/libpkix/pkix_pl_tests/module/runPLTests.sh
2015-10-20 23:03:22 -04:00

135 lines
6.3 KiB
Bash

#!/bin/sh
#
# ***** BEGIN LICENSE BLOCK *****
# Version: MPL 1.1/GPL 2.0/LGPL 2.1
#
# The contents of this file are subject to the Mozilla Public License Version
# 1.1 (the "License"); you may not use this file except in compliance with
# the License. You may obtain a copy of the License at
# http://www.mozilla.org/MPL/
#
# Software distributed under the License is distributed on an "AS IS" basis,
# WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
# for the specific language governing rights and limitations under the
# License.
#
# The Original Code is the PKIX-C library.
#
# The Initial Developer of the Original Code is
# Sun Microsystems, Inc.
# Portions created by the Initial Developer are
# Copyright 2004-2007 Sun Microsystems, Inc. All Rights Reserved.
#
# Contributor(s):
# Sun Microsystems, Inc.
#
# Alternatively, the contents of this file may be used under the terms of
# either the GNU General Public License Version 2 or later (the "GPL"), or
# the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
# in which case the provisions of the GPL or the LGPL are applicable instead
# of those above. If you wish to allow use of your version of this file only
# under the terms of either the GPL or the LGPL, and not to allow others to
# use your version of this file under the terms of the MPL, indicate your
# decision by deleting the provisions above and replace them with the notice
# and other provisions required by the GPL or the LGPL. If you do not delete
# the provisions above, a recipient may use your version of this file under
# the terms of any one of the MPL, the GPL or the LGPL.
#
# ***** END LICENSE BLOCK *****
#
# runPLTests.sh
#
curdir=`pwd`
cd ../../common
. ./libpkix_init.sh > /dev/null
. ./libpkix_init_nist.sh
cd ${curdir}
numtests=0
passed=0
testunit=MODULE
doModule=1
### setup NIST files need to link in
linkModuleNistFiles="InvalidDNnameConstraintsTest3EE.crt
InvalidonlySomeReasonsTest21EE.crt
indirectCRLCA3cRLIssuerCRL.crl
nameConstraintsDN3subCA2Cert.crt
nameConstraintsDN4CACert.crt
nameConstraintsDN5CACert.crt
onlyContainsAttributeCertsCACRL.crl
onlyContainsCACertsCACRL.crl
onlyContainsUserCertsCACRL.crl
onlySomeReasonsCA3compromiseCRL.crl
requireExplicitPolicy2CACert.crt
inhibitPolicyMapping5CACert.crt
inhibitAnyPolicy5CACert.crt
inhibitAnyPolicy0CACert.crt
P1Mapping1to234CACert.crt
UserNoticeQualifierTest15EE.crt
UserNoticeQualifierTest16EE.crt
UserNoticeQualifierTest17EE.crt
UserNoticeQualifierTest18EE.crt
CPSPointerQualifierTest20EE.crt"
if [ -n "${NIST_FILES_DIR}" ]; then
if [ ! -d ${HOSTDIR}/rev_data/local ]; then
mkdir -p ${HOSTDIR}/rev_data/local
fi
for i in ${linkModuleNistFiles}; do
if [ -f ${HOSTDIR}/rev_data/local/$i ]; then
rm ${HOSTDIR}/rev_data/local/$i
fi
cp ${NIST_FILES_DIR}/$i ${HOSTDIR}/rev_data/local/$i
done
localCRLFiles="crlgood.crl
crldiff.crl
issuer-hanfei.crl
issuer-none.crl"
for i in ${localCRLFiles}; do
cp ${curdir}/rev_data/local/$i ${HOSTDIR}/rev_data/local/$i
done
fi
##########
# main
##########
ParseArgs $*
SOCKETTRACE=0
export SOCKETTRACE
RunTests <<EOF
pkixutil test_colcertstore NIST-Test-Files-Used rev_data/local ${HOSTDIR}
pkixutil test_pk11certstore -d ../../pkix_pl_tests/module ../../pkix_tests/top/rev_data/crlchecker
pkixutil test_ekuchecker "Test-EKU-without-OID" ENE "" rev_data test_eku_codesigning_clientauth.crt test_eku_clientauth.crt test_eku_clientauthEE.crt
pkixutil test_ekuchecker "Test-EKU-with-good-OID" ENE "1.3.6.1.5.5.7.3.3" rev_data test_eku_codesigning_clientauth.crt test_eku_clientauth.crt test_eku_clientauthEE.crt
pkixutil test_ekuchecker "Test-EKU-with-bad-OID" EE "1.3.6.1.5.5.7.3.4" rev_data test_eku_codesigning_clientauth.crt test_eku_clientauth.crt test_eku_clientauthEE.crt
pkixutil test_ekuchecker "Test-EKU-with-good-and-bad-OID" EE "1.3.6.1.5.5.7.3.3,1.3.6.1.5.5.7.3.4" rev_data test_eku_codesigning_clientauth.crt test_eku_clientauth.crt test_eku_clientauthEE.crt
pkixutil test_ekuchecker "Test-EKU-only-EE-with-good-OID" ENE "E1.3.6.1.5.5.7.3.3" rev_data test_eku_codesigning_clientauth.crt test_eku_clientauth.crt test_eku_clientauthEE.crt
pkixutil test_ekuchecker "Test-EKU-only-EE-with-bad-OID" EE "E1.3.6.1.5.5.7.3.4" rev_data test_eku_codesigning_clientauth.crt test_eku_clientauth.crt test_eku_clientauthEE.crt
pkixutil test_ekuchecker "Test-EKU-serverAuth" ENE "1.3.6.1.5.5.7.3.1" rev_data test_eku_all.crt test_eku_allbutcodesigningEE.crt
pkixutil test_ekuchecker "Test-EKU-clientAuth" ENE "1.3.6.1.5.5.7.3.2" rev_data test_eku_all.crt test_eku_allbutcodesigningEE.crt
pkixutil test_ekuchecker "Test-EKU-codesigning-without-OID" EE "1.3.6.1.5.5.7.3.3" rev_data test_eku_all.crt test_eku_allbutcodesigningEE.crt
pkixutil test_ekuchecker "Test-EKU-emailProtection" ENE "1.3.6.1.5.5.7.3.4" rev_data test_eku_all.crt test_eku_allbutcodesigningEE.crt
pkixutil test_ekuchecker "Test-EKU-timestamping" ENE "1.3.6.1.5.5.7.3.8" rev_data test_eku_all.crt test_eku_allbutcodesigningEE.crt
pkixutil test_ekuchecker "Test-EKU-OCSPSigning" ENE "1.3.6.1.5.5.7.3.9" rev_data test_eku_all.crt test_eku_allbutcodesigningEE.crt
pkixutil test_ekuchecker "Test-EKU-only-EE-serverAuth" ENE "E1.3.6.1.5.5.7.3.1" rev_data test_eku_all.crt test_eku_allbutcodesigningEE.crt
pkixutil test_ekuchecker "Test-EKU-only-EE-clientAuth" ENE "E1.3.6.1.5.5.7.3.2" rev_data test_eku_all.crt test_eku_allbutcodesigningEE.crt
pkixutil test_ekuchecker "Test-EKU-only-EE-codesigning-without-OID" EE "E1.3.6.1.5.5.7.3.3" rev_data test_eku_all.crt test_eku_allbutcodesigningEE.crt
pkixutil test_ekuchecker "Test-EKU-only-EE-emailProtection" ENE "E1.3.6.1.5.5.7.3.4" rev_data test_eku_all.crt test_eku_allbutcodesigningEE.crt
pkixutil test_ekuchecker "Test-EKU-only-EE-timestamping" ENE "E1.3.6.1.5.5.7.3.8" rev_data test_eku_all.crt test_eku_allbutcodesigningEE.crt
pkixutil test_ekuchecker "Test-EKU-only-EE-ocspSigning" ENE "E1.3.6.1.5.5.7.3.9" rev_data test_eku_all.crt test_eku_allbutcodesigningEE.crt
pkixutil test_socket ${HOSTADDR}:2000
EOF
totalErrors=$?
html_msg ${totalErrors} 0 "&nbsp;&nbsp;&nbsp;${testunit}: passed ${passed} of ${numtests} tests"
exit ${totalErrors}