kamp/python-broadlink
1
0
Fork 0
mirror of https://github.com/mjg59/python-broadlink.git synced 2024-11-14 03:20:14 +01:00
Code
287 Commits 5 Branches 16 Tags 1.5 MiB
a84a628d1c
Commit Graph

187 Commits

Author SHA1 Message Date
Felipe Martins Diel
5e444988e1
Fix 0x62be device name (#354) 2020-05-02 13:51:59 +02:00
Felipe Martins Diel
f3d0427133
Extend support to RM4c Mini (0x6070) (#348) 2020-04-25 11:41:04 +02:00
Felipe Martins Diel
3e8b008ef7
Close sockets after using them (#350) 2020-04-25 11:40:48 +02:00
Felipe Martins Diel
6cf9292b44
Revert adler32 (#345) 
* Revert adler32

* Fix checksum
 2020-04-19 08:53:09 +02:00
Felipe Martins Diel
65a1b04666
Fix device name (#342) 2020-04-19 08:50:16 +02:00
Kevin Eifinger
ed87b8d1de
Add missing "self." to calculate_crc16 uses (#344) 2020-04-19 08:49:55 +02:00
Felipe Martins Diel
548aa05da0
Extend support to RM4 Pro (0x6026) (#340) 2020-04-15 09:04:01 +02:00
Felipe Martins Diel
a5925063f9
Fix padding algorithm for CBC mode 
Due to the lack of a parenthesis, the packets were getting 16 bytes larger than necessary.
 2020-04-13 17:42:51 -03:00
majuss
a6827caaf7
Removed PyCRC as dependency; implemented CRC16 directly (#327) 
* Removed PyCRC as dependency; implemented CRC16 directly

* replace crc16 with integrated function

* Added self to calculate crc
 2020-04-10 09:23:15 +02:00
csabavirag
2bc7b06c69
Adding support for LB1 (RGB Light Bulb - 0x60e8) (#332) 2020-04-05 19:14:47 +02:00
Felipe Martins Diel
26a4565e58
Add support for RM4 0x62bc (#331) 
* Add support for RM4 0x62bc

* Fix device name
 2020-04-05 19:14:09 +02:00
Felipe Martins Diel
446496cc24
Obtain device name and cloud byte from HELLO_RESPONSE (#322) 2020-03-24 16:09:31 +01:00
hakana
4a3950a7c5
Add temperature and humidity for RM4 mini (0x610e) (#321) 
* Add temperature and humidity reading for RM4 Mini

* Change divider for tem and humi (RM4 mini)
 2020-03-23 21:23:05 +01:00
hakana
84e53c8d2b
Add support for RM4 mini with device type 0x610e (#320) 2020-03-16 19:56:06 +01:00
Felipe Martins Diel
1a1169f1a9
Add support for 0x5f36 devices and RM4 series (#317) 
* Add support for 0x5f36 devices

This type of device requires a header in the payload. The rest is the same.

* Improve request header assignment

* Change code sending header

I just found out that this device uses a different header for sending codes. This update addresses this issue.

* Improve authentication

Use the error code to check if the authentication was successful.

* Use default value when devtype is None

* Use generic remote type if devtype is None

* Extend support to RM4 series

I just realized that RM4 devices use the same header. I will take the opportunity to extend support to these devices as well.

* Add device type 0x62be and create rm4 class 

The rm4 class will improve code scalability. Just add the RM4 type to this class and it will just work.

* Remove comma
 2020-03-16 09:49:41 +01:00
Daniel Høyer Iversen
654db0935b
Fix new RM mini3 (#305) 
* Fix new RM mini3

Some little change

* Fix new RM mini3

Some little change

Co-authored-by: Daniel Høyer Iversen <mail@dahoiv.net>
 2020-03-04 22:26:23 +01:00
Daniel Høyer Iversen
e84becd05b
Add support for specifying destination IP address to use in discovery (#313) 
Co-authored-by: Kja64 <Ken@lkv20.dk>
 2020-03-04 22:25:00 +01:00
Daniel Høyer Iversen
ec4df39665
Add 27de RM Mini 3 (C) (#314) 
I have a 0x27de RM Mini 3, as inspired by https://github.com/lprhodes/broadlinkjs-rm/blob/master/index.js, I added the identification and python-broadlink would handle it properly.
 2020-03-04 22:24:33 +01:00
Daniel Høyer Iversen
8e7446f410
Fix CBC mode padding and use adler32 for checksums (#315) 
* Fix CBC mode padding and use adler32 for checksums

* Change line order

This change comes to improve the readability of the code.

* Use zero-padding for CBC mode
 2020-03-04 22:24:09 +01:00
Barnaby Gray
a05efe1c00 Add detail on return value for get_state() 2019-10-16 09:58:02 +01:00
Barnaby Gray
660c2269e4 Add support for BG Electrical Smart Sockets 2019-10-13 22:12:13 +01:00
Daniel Høyer Iversen
2e5361bd8e
Remove support for pyaes (#281) 
* remove support for pyaes

* remove support for pyaes

* remove support for pyaes
 2019-10-02 09:25:27 +03:00
Leonardo Brondani Schenkel
11c5981793 Use old IP address lookup logic as fallback (#275) 
On some machines, resolving the local hostname results in a loopback IP
address (127.0.0.0/8). This breaks discovery. In these situations, fall
back to the old IP address lookup logic that was removed on commit 790edb9.
 2019-08-16 12:13:53 +03:00
Johnson Chin
9d9b49c3db SP2: Add support for OEM SP2 (#251) 2019-06-24 20:06:50 +02:00
Daniel Høyer Iversen
9ec2da834b
handle none power raw (#250) 2019-06-10 09:12:50 +02:00
Daniel Høyer Iversen
38a40c5a19
Use cryptography instead of pycryptodome (#246) 
* Use cryptography instad of pycryptodome

* Use cryptography instad of pycryptodome
 2019-05-27 20:57:32 +02:00
AnilDaoud
b8fdf337c9 cleaner local ip address lookup (#244) 2019-05-22 07:27:34 +02:00
Daniel Høyer Iversen
a75f98720e
code clean up (#243) 2019-05-19 17:54:14 +02:00
Matthew Garrett
3ad4a9f0f8
Merge branch 'master' into rf_experiment_v0.9 2019-05-18 00:10:40 -07:00
ninstein
0db3179623 Update __init__.py 
add new device: TMall OEM SPMini3
 2019-05-18 00:08:52 -07:00
gpenverne
77f11c8d49 Allow string mac address in constructor 2019-05-18 00:06:47 -07:00
BAN
9996c252f7
Update __init__.py 2019-01-08 16:47:31 +09:00
Sergey Prilukin
2b4e6d91ff
Merge branch 'rf_experiment' into rf_experiment_v0.9 
# Conflicts:
#	README.md
#	broadlink/__init__.py
#	cli/broadlink_cli
 2018-11-26 00:21:37 +02:00
Nick Dimov
73fc5fc4b9 Support for a new SP2 device. 
It returns different codes for check and checknl.
 2018-10-27 16:15:47 +03:00
Mayeul Cantan
56b2ac36e5 Refactor the device list 
It is now more readable, which should make it easier to parse the code
and add new devices.
 2018-04-30 23:06:19 +02:00
lordneon
e724aec007 Fixed a bug within the SP2 class. 
check_power and check_nightlight did not check to see if the payload was already an int before calling ord.
 2018-04-15 10:22:19 +00:00
Daniel Høyer Iversen
3b6b55ae73
Merge pull request #164 from horse315/master 
fixed Hysen thermostat ctor & added comments
 2018-03-31 15:57:17 +02:00
ooo89
832a40c278
Update __init__.py 2018-03-28 16:56:36 +02:00
Aleksey Bogomolov
e9748ff0b4
fixed Hysen thermostat ctor & added comments 2018-03-24 19:05:44 +03:00
clach04
8b593beff9 Restore Python 3 support (#95) 
Use explicit byte literals.

AES encryption padding broken with commit f7e30344c5 under Python 3.
Python 3 support when using pyaes (instead of Crypto.Cipher.AES) now works.
 2018-03-18 15:12:20 -07:00
Nightreaver
33a2e4ae54 implemented method to toggle nightlight on some SP3 devices (#159) 
* implemented method to toggle nightlight on some SP3 devices

* implement nightlight feature to cli

* check_power/check_nightligh fixes for py2.7
 2018-03-18 15:03:46 -07:00
Peter Windridge
39cc64efce Basic support for Hysen Heating Controller (dev type 0x4ead) (#138) 
* Initial support for Hysen heating controller device.  Only gets current temperature.

* Add switch_to_auto() to put the controller in (pre-programmed) timed mode

* Add set_temp() to manually set temperature.  Now requires PyCRC (payload needs modbus CRC16)

* Remove test script

* Get current timer schedule

* Get much more data from device

* Add PyCRC to install_requires setup.py

* Rewrite based on better understanding.  Allow setting schedule and changing 'loop mode'

* Add set_time function

* Support advanced settings and perform CRC check on responses

* Explain remaining unknowns for Hyson thermostat

The room_temp_adj (or simply 'adj') only applies to the room_temp. It's limited to -5.0..+5.0, but uses a 2 byte data type.
This leads to the assumption that external_temp could also use this data type, maybe for showing temperatures below 0 - but I cannot test this currently. Maybe I have to place it near a fridge to confirm.

* Fix get_temp and add get_external_temp for Hysen

Again: maybe payload[17] also belongs to the external temperature...

* remove comment about first 2 bytes and raise error if CRC check on response fails

* Remove comment about guessed meaning of unknown

Just confirmed, that lowest outside temp is 0. So it seems to only need 1 byte, as room temp does.

* add ability to toogle hysen device power

Turn display power on/off

* Update set_power() to support remote_lock for Hysen

Sorry, there was still one thing missing: set/unset remote_lock.
I captured again and changed the set_power accordingly.

* fix comments
 2018-03-18 15:03:26 -07:00
Nightreaver
8754493951 broadlink_discovery returns wrong devtype (#157) 
* few item in gendevice use `if` instead of `elif`

* passing `devtype` back to device
change `cli/broadlink_discovery` to display proper devtype
 2018-03-18 14:58:15 -07:00
marconfus
26109aac67 Fix for environments where Crypto and pyaes are installed. (#151) 
If both Crypto and pyaes are installed 'pyaes' is in sys.modules(), but as it is not imported (see top) it's not available.
Fix for #128
 2018-03-18 14:54:17 -07:00
Daniel Høyer Iversen
00cc79daee
Merge pull request #149 from deel77/master 
Default support for python3 in get_energy() for SP2
 2018-03-10 15:30:42 +01:00
Steven Barthen
d186332b96 add new rmpro models - Pro Plus 3, Pro Plus 300, Pro Plus HYC, Pro Plus R1, Pro PP 2018-03-10 21:10:33 +09:00
Dominik Lakatoš
51ff890c7c
modified get_energy() to support python3 2018-02-08 13:47:28 +01:00
Brent Avery
4e33ef4465 Get rf scan learning working in CLI tool (#87) 2018-01-30 07:50:51 +11:00
Aleksandr Smirnov
82172f54ab support for dooya curtain motor (#134) 2017-12-25 00:34:37 +00:00
Matthew Garrett
dd6eb8767e Experimental RF code 2017-11-25 12:38:57 -08:00
jazzina
b8cf8d073e Add support for SmartOne Alarm Kit 2017-11-25 12:20:46 -08:00
Eugene Schava
2160488da2 sp2.get_energy 2017-11-25 12:11:05 -08:00
Eugene Schava
626b459b5b SP3S support (#117) 2017-11-25 12:08:58 -08:00
hackers365
1d7fba3d06 add honyar mp1 devtype 0x4ef7 2017-11-25 12:08:14 -08:00
mob41
2e2c8ef1a1 [Critical] Fixes invalid byte string (b) for padding (#97, #107) (#108) 
* Fixes invalid byte string (b) for padding (#97, #107)

* Change version to 0.5
 2017-06-13 19:30:27 -07:00
kost
f7e30344c5 pad the payload for AES encryption (16) (#92) 2017-05-07 11:32:52 -07:00
Robert Sullivan
babb3f83d3 Python3.5 syntax changes 2017-04-25 15:33:00 +01:00
Aydaen Lynch
d989c27d36 Add in AP Mode device setup for new Broadlink devices. (#53) 2017-04-22 12:48:02 -07:00
Daniel Høyer Iversen
19851ed423 bug fix in timeout (#70) 2017-04-22 12:38:02 -07:00
Dimitrij
d346476e63 fix check_power for SP2/SP3 (#72) 
Fixed up to avoid merge conflict with #78
 2017-04-22 12:36:50 -07:00
Thomas Järvstrand
4f03ffb963 Add support for pure python AES implementation (#78) 2017-04-22 12:34:37 -07:00
Víctor Ferrer García
63e097d73f check_power_raw included for mp1 devices 
Export raw power state for MP1 devices
 2017-01-02 23:31:04 -06:00
Daniel Høyer Iversen
39e170c9e0 validate the authorization 2016-12-26 20:02:04 +01:00
Daniel Høyer Iversen
b30fc0d1c1 Ensure discover() returns devices and not None 
There's a small race condition in the discover() method. If recv() returns
before the socket timeout is reached, but we hit the top of the loop after
the timeout is reached, we'll return None rather than the set of devices.
 2016-12-25 11:16:53 +00:00
Matthew Garrett
877a7b7460 Merge pull request #34 from eschava/master 
allow to specify network interface for discover method
 2016-12-25 11:07:54 +00:00
Matthew Garrett
a0a1c1b7a1 Merge pull request #37 from Danielhiversen/patch-9 
Make communication thread safe
 2016-12-25 11:07:19 +00:00
Victor Ferrer
d519623dd4 Add new device support: Broadlink MP1 Smart power strip 2016-12-25 10:59:58 +00:00
Daniel Høyer Iversen
1296c3da48 Make communication thread safe 2016-12-22 09:51:38 +01:00
Eugene Schava
72cf09f9e4 allow to specify network interface for discover method 2016-12-20 15:59:32 +02:00
Matthew Garrett
63d184fc8c Provide raw sensor data 
Provide raw versions of the sensor data for interpretation by clients
 2016-12-03 16:41:10 -08:00
Matthew Garrett
d10a43531c Fix python 2 compatibility 
Ugly but appears to work
 2016-12-03 16:40:58 -08:00
Matthew Garrett
31cd077165 Expose the type of the discovered device 
Allow clients to identify what kind of device has been discovered
 2016-12-03 14:22:20 -08:00
Matthew Garrett
9628b87572 Merge remote-tracking branch 'zenitraM/python3' 2016-12-03 14:16:32 -08:00
Alejandro M
a5d05c95b3 Python 3 compatibility 2016-11-24 22:25:14 +01:00
Matthew Garrett
d066513d02 Add packet retransmission and timeout 
UDP doesn't guarantee delivery, so reattempt packet transmission if we don't
get a response and timeout if we still don't have anything after (by
default) 10 seconds.
 2016-11-20 11:18:51 -08:00
Matthew Garrett
7ac243b838 Merge pull request #16 from PeWu/smartplug 
Updated SmartPlug commands - set_power() and check_power()
 2016-11-19 16:47:28 -08:00
Matthew Garrett
c68fcea5e6 Fix single device discovery 
The automatic device type detection was only implemented when discovering
with a timeout. Refactor to do it for the single-device discover() case.
 2016-11-19 14:23:50 -08:00
Przemek Wiech
1e04ec2be5 Merge branch 'master' into smartplug. 2016-11-18 21:20:35 +01:00
Przemek Wiech
652f52eb03 Updated SmartPlug commands - set_power() and check_power() 2016-11-18 00:19:02 +01:00
Matthew Garrett
d490c5b71e Add automatic determination of device type 
Look at the device ID and figure out what type of device it is, and provide
appropriate classes for each that only support the functionality available
on that device.
 2016-11-18 09:55:21 +13:00
Matthew Garrett
c174e40f59 Add experimental support for smartplugs 
This adds a set_power() call that should work for the SP2 - unsure whether
it will work for the SP3.
 2016-11-13 14:29:07 +13:00
Marcus Stewart Hughes
4705fdf011 each send_packet() needs a unique count 
Increment count instead of randomly generating on each send_packet() as per @mjg59's suggestion.

Tested and working as expected.
 2016-11-10 20:13:21 +00:00
Kelvin Law
bd1c44488d Fix for [Errno 49] Can't assign requested address 
Fixes #3 on macOS
 2016-11-02 20:34:46 -07:00
Matthew Garrett
989009e21f Add support for multiple devices and update documentation 
Add support for discovering more than one device on the network, and update
the documentation to describe that.
 2016-10-30 14:16:40 -07:00
Matthew Garrett
69afd4ce52 Add support for sensor data 
Add a check_temperature() function that'll work for both the RM2 and the A1
sensor platform, and a check_sensors() function that returns the full set of
sensor data for the A1 as a dict.
 2016-10-24 20:50:34 -07:00
Matthew Garrett
6936bc750e Attempt to handle timezones 
The timezone should be embedded in the discovery packet, so make a better
attempt to do that.
 2016-10-10 01:09:06 -07:00
Matthew Garrett
ecab016a73 Initial commit 2016-09-15 13:20:16 -07:00