# python-broadlink

A Python module and CLI for controlling Broadlink devices locally. The following devices are supported:

- **Universal remotes**: RM home, RM mini 3, RM plus, RM pro, RM pro+, RM4 mini, RM4 pro, RM4C mini, RM4S
- **Smart plugs**: SP mini, SP mini 3, SP mini+, SP1, SP2, SP2-BR, SP2-CL, SP2-IN, SP2-UK, SP3, SP3-EU, SP3S-EU, SP3S-US, SP4L-AU, SP4L-EU, SP4L-UK, SP4M, SP4M-US, Ankuoo NEO, Ankuoo NEO PRO, Efergy Ego, BG AHC/U-01
- **Switches**: MCB1, SC1, SCB1E, SCB2
- **Outlets**: BG 800, BG 900
- **Power strips**: MP1-1K3S2U, MP1-1K4S, MP2
- **Environment sensors**: A1
- **Alarm kits**: S1C, S2KIT
- **Light bulbs**: LB1, LB2, SB800TD
- **Curtain motors**: Dooya DT360E-45/20
- **Thermostats**: Hysen HY02B05H

## Installation

Use pip3 to install the latest version of this module.

```
pip3 install broadlink
```

## Basic functions

First, open Python 3 and import this module.

```
python3
```
```python3
import broadlink
```

Now let's try some functions...

### Setup

In order to control the device, you need to connect it to your local network. If you have already configured the device with the Broadlink app, this step is not necessary.

1. Put the device into AP Mode.
  - Long press the reset button until the blue LED is blinking quickly.
  - Long press again until blue LED is blinking slowly.
  - Manually connect to the WiFi SSID named BroadlinkProv.
2. Connect the device to your local network with the setup function.
```python3
broadlink.setup('myssid', 'mynetworkpass', 3)
```

Security mode options are (0 = none, 1 = WEP, 2 = WPA1, 3 = WPA2, 4 = WPA1/2)

### Discovery

Use this function to discover devices:

```python3
devices = broadlink.discover()
```

#### Advanced options
You may need to specify `local_ip_address` or `discover_ip_address` if discovery does not return any devices.

```python3
devices = broadlink.discover(local_ip_address='192.168.0.100')  # IP address of your local machine.
```

```python3
devices = broadlink.discover(discover_ip_address='192.168.0.255')  # Broadcast address of your subnet.
```

If the device is locked, it may not be discoverable with broadcast. In such cases, you can use the unicast version `broadlink.hello()` for direct discovery:
```python3
device = broadlink.hello('192.168.0.16')  # IP address of your Broadlink device.
```

If you are a perfomance freak, use `broadlink.xdiscover()` to create devices instantly:
```python3
for device in broadlink.xdiscover():
    print(device)  # Example action. Do whatever you want here.
```

### Authentication
After discovering the device, call the `auth()` method to obtain the authentication key required for further communication:
```python3
device.auth()
```

The next steps depend on the type of device you want to control.

## Universal remotes

### Learning IR codes

Learning IR codes takes place in three steps.

1. Enter learning mode:
```python3
device.enter_learning()
```
2. When the LED blinks, point the remote at the Broadlink device and press the button you want to learn.
3. Get the IR packet.
```python3
packet = device.check_data()
```

### Learning RF codes

Learning IR codes takes place in five steps.

1. Sweep the frequency:
```python3
device.sweep_frequency()
```
2. When the LED blinks, point the remote at the Broadlink device for the first time and long press the button you want to learn.
3. Enter learning mode:
```python3
device.find_rf_packet()
```
4. When the LED blinks, point the remote at the Broadlink device for the second time and short press the button you want to learn.
5. Get the RF packet:
```python3
packet = device.check_data()
```

### Canceling learning

You can exit the learning mode in the middle of the process by calling this method:
```python3
device.cancel_sweep_frequency()
```

### Sending IR/RF packets
```python3
device.send_data(packet)
```

### Fetching sensor data
```python3
data = device.check_sensors()
```

## Switches

### Setting power state
```python3
device.set_power(True)
device.set_power(False)
```

### Checking power state
```python3
state = device.check_power()
```

### Checking energy consumption
```python3
state = device.get_energy()
```

## Power strips

### Setting power state
```python3
device.set_power(1, True)  # Example socket. It could be 2 or 3.
device.set_power(1, False)
```

### Checking power state
```python3
state = device.check_power()
```

## Light bulbs

### Fetching data
```python3
state = device.get_state()
```

### Setting state attributes
```python3
devices[0].set_state(pwr=0)
devices[0].set_state(pwr=1)
devices[0].set_state(brightness=75)
devices[0].set_state(bulb_colormode=0)
devices[0].set_state(blue=255)
devices[0].set_state(red=0)
devices[0].set_state(green=128)
devices[0].set_state(bulb_colormode=1)
```

## Environment sensors

### Fetching sensor data
```python3
data = device.check_sensors()
```