Python control for Broadlink RM2 IR controllers =============================================== A simple Python API for controlling IR controllers from [Broadlink](http://www.ibroadlink.com/rm/). At present, only RM Pro (referred to as RM2 in the codebase) and A1 sensor platform devices are supported. There is currently no support for the cloud API. Example use ----------- Discover available devices on the local network: ``` import broadlink devices = broadlink.discover(timeout=5) ``` Obtain the authentication key required for further communication: ``` devices[0].auth() ``` Enter learning mode: ``` devices[0].enter_learning() ``` Obtain an IR or RF packet while in learning mode: ``` ir_packet = devices[0].check_data() ``` (This will return None if the device does not have a packet to return) Send an IR or RF packet: ``` devices[0].send_data(ir_packet) ``` Obtain temperature data from an RM2: ``` devices[0].check_temperature() ``` Obtain sensor data from an A1: ``` data = devices[0].check_sensors() ``` Set power state on a SmartPlug SP2/SP3: ``` devices[0].set_power(True) ``` Check power state on a SmartPlug: ``` state = devices[0].check_power() ```