1ad468aefe
Amend: Fix sp3s energy monitoring (#504) |
||
---|---|---|
.github/workflows | ||
broadlink | ||
cli | ||
.gitignore | ||
LICENSE | ||
protocol.md | ||
README.md | ||
requirements.txt | ||
setup.py |
Python control for Broadlink RM2, RM3 and RM4 series controllers
A simple Python API for controlling IR/RF controllers from Broadlink. At present, the following devices are currently supported:
- RM Pro (referred to as RM2 in the codebase)
- A1 sensor platform devices are supported
- RM3 mini IR blaster
- RM4 and RM4C mini blasters
- SP2/SP3/SP4 smart plugs
There is currently no support for the cloud API.
Example use
Setup a new device on your local wireless network:
- Put the device into AP Mode
- Long press the reset button until the blue LED is blinking quickly.
- Long press again until blue LED is blinking slowly.
- Manually connect to the WiFi SSID named BroadlinkProv.
- Run setup() and provide your ssid, network password (if secured), and set the security mode
- Security mode options are (0 = none, 1 = WEP, 2 = WPA1, 3 = WPA2, 4 = WPA1/2)
import broadlink
broadlink.setup('myssid', 'mynetworkpass', 3)
Discover available devices on the local network:
import broadlink
devices = broadlink.discover(timeout=5)
You may need to specify local_ip_address
or discover_ip_address
if discovery does not return any devices.
Using your machine's IP address with local_ip_address
import broadlink
devices = broadlink.discover(timeout=5, local_ip_address=192.168.0.100)
Using your subnet's broadcast address with discover_ip_address
import broadlink
devices = broadlink.discover(timeout=5, discover_ip_address=192.168.0.255)
Obtain the authentication key required for further communication:
devices[0].auth()
Enter learning mode:
devices[0].enter_learning()
Sweep RF frequencies:
devices[0].sweep_frequency()
Cancel sweep RF frequencies:
devices[0].cancel_sweep_frequency()
Check whether a frequency has been found:
found = devices[0].check_frequency()
(This will return True if the RM has locked onto a frequency, False otherwise)
Attempt to learn an RF packet:
found = devices[0].find_rf_packet()
(This will return True if a packet has been found, False otherwise)
Obtain an IR or RF packet while in learning mode:
ir_packet = devices[0].check_data()
(This will return None if the device does not have a packet to return)
Send an IR or RF packet:
devices[0].send_data(ir_packet)
Obtain temperature data from an RM2:
devices[0].check_temperature()
Obtain sensor data from an A1:
data = devices[0].check_sensors()
Set power state on a SmartPlug SP2/SP3/SP4:
devices[0].set_power(True)
Check power state on a SmartPlug:
state = devices[0].check_power()
Check energy consumption on a SmartPlug:
state = devices[0].get_energy()
Set power state for S1 on a SmartPowerStrip MP1:
devices[0].set_power(1, True)
Check power state on a SmartPowerStrip:
state = devices[0].check_power()