1
0
mirror of https://github.com/searxng/searxng.git synced 2024-11-04 20:30:11 +01:00

[docs] corrections from @tiekoetter's review

This commit is contained in:
Léon Tiekötter 2022-06-21 14:48:46 +02:00 committed by Markus Heiser
parent 6fbffe9d20
commit e5323b8aa2
10 changed files with 36 additions and 36 deletions

View File

@ -19,7 +19,7 @@ SearXNG infrastructures.
uWSGI Setup
===========
We start with a *reference* setup for public SearXNG instances which can build
We start with a *reference* setup for public SearXNG instances which can be build
up and maintained by the scripts from our :ref:`toolboxing`.
.. _arch public:

View File

@ -40,8 +40,8 @@ Apache
https://httpd.apache.org/docs/current/mod/mod_proxy.html
This section explains how to set up a SearXNG site using the HTTP server Apache_.
If you have used the :ref:`installation scripts` and do not have any preference
This section explains how to set up a SearXNG instance using the HTTP server Apache_.
If you did use the :ref:`installation scripts` and do not have any special preferences
you can install the :ref:`SearXNG site <apache searxng site>` using
:ref:`searxng.sh <searxng.sh overview>`:
@ -99,8 +99,8 @@ Directives`_ documentation gives first orientation. There is also a list of
sudo -H systemctl enable httpd
sudo -H systemctl start httpd
Now at http://localhost you should see any kind of *Welcome* or *Test* page.
How this default intro site is configured, depends on the linux distribution
Now at http://localhost you should see some kind of *Welcome* or *Test* page.
How this default site is configured, depends on the linux distribution
(compare `Apache directives`_).
.. tabs::
@ -322,11 +322,11 @@ mod_proxy_ module (:ref:`apache modules`).
With ProxyPreserveHost_ the incoming ``Host`` header is passed to the proxied
host.
Depending on what your SearXNG installation is listen, you need a http
Depending on what your SearXNG installation is listening on, you need a http
mod_proxy_http_) or socket (mod_proxy_uwsgi_) communication to upstream.
The :ref:`installation scripts` installs by default the :ref:`reference setup
<use_default_settings.yml>` and a :ref:`uwsgi setup` that listens on a socket.
The :ref:`installation scripts` installs the :ref:`reference setup
<use_default_settings.yml>` and a :ref:`uwsgi setup` that listens on a socket by default.
You can install and activate your own ``searxng.conf`` like shown in
:ref:`apache sites`.
@ -383,6 +383,6 @@ one of the lines and `restart apache`_:
SetEnvIf Request_URI "/searxng" dontlog
# CustomLog /dev/null combined env=dontlog
The ``CustomLog`` directive disable logs of the entire (virtual) server, use it
when the URL of the service does not have a path component (``/searxng``), when
The ``CustomLog`` directive disables logs for the entire (virtual) server, use it
when the URL of the service does not have a path component (``/searxng``), so when
SearXNG is located at root (``/``).

View File

@ -51,8 +51,8 @@ of this container:
Get Docker
==========
If you plan to build and maintain a docker image by your own, make sure you have
`Docker installed <https://docs.docker.com/get-docker/>`_ and on Linux, don't
If you plan to build and maintain a docker image by yourself, make sure you have
`Docker installed <https://docs.docker.com/get-docker/>`_. On Linux don't
forget to add your user to the docker group (log out and log back in so that
your group membership is re-evaluated):

View File

@ -19,8 +19,8 @@ NGINX
.. _SCRIPT_NAME:
https://werkzeug.palletsprojects.com/en/1.0.x/wsgi/#werkzeug.wsgi.get_script_name
This section explains how to set up a SearXNG site using the HTTP server nginx_.
If you have used the :ref:`installation scripts` and do not have any preference
This section explains how to set up a SearXNG instance using the HTTP server nginx_.
If you have used the :ref:`installation scripts` and do not have any special preferences
you can install the :ref:`SearXNG site <nginx searxng site>` using
:ref:`searxng.sh <searxng.sh overview>`:
@ -78,7 +78,7 @@ If nginx_ is not installed, install it now.
Now at http://localhost you should see a *Welcome to nginx!* page, on Fedora you
see a *Fedora Webserver - Test Page*. The test page comes from the default
`nginx server configuration`_. How this default intro site is configured,
`nginx server configuration`_. How this default site is configured,
depends on the linux distribution:
.. tabs::
@ -134,7 +134,7 @@ site. If nginx_ is new to you, the `nginx beginners guide`_ is a good starting
point and the `Getting Started wiki`_ is always a good resource *to keep in the
pocket*.
Depending on what your SearXNG installation is listen, you need a http or socket
Depending on what your SearXNG installation is listening on, you need a http or socket
communication to upstream.
.. tabs::
@ -151,8 +151,8 @@ communication to upstream.
:start-after: START nginx http
:end-before: END nginx http
The :ref:`installation scripts` installs by default the :ref:`reference setup
<use_default_settings.yml>` and a :ref:`uwsgi setup` that listens on a socket.
The :ref:`installation scripts` installs the :ref:`reference setup
<use_default_settings.yml>` and a :ref:`uwsgi setup` that listens on a socket by default.
.. tabs::

View File

@ -4,12 +4,12 @@
Installation Script
===================
.. sidebar:: Update OS first!
.. sidebar:: Update the OS first!
To avoid unwanted side effects, update your OS before installing SearXNG.
The following will install a setup as shown in :ref:`the reference architecture
<arch public>`. First you need to get a clone. The clone is only needed for
<arch public>`. First you need to get a clone of the repository. The clone is only needed for
the installation procedure and some maintenance tasks.
.. sidebar:: further read
@ -41,9 +41,9 @@ including a :ref:`uWSGI setup <architecture uWSGI>` as described in the
For the installation procedure, use a *sudoer* login to run the scripts. If
you install from ``root``, take into account that the scripts are creating a
``searxng`` user. In the installation procedure this new created user do
need read access to the clone of searx, which is not the case if you clone
into a folder below ``/root``!
``searxng`` user. In the installation procedure this new created user does
need read access to the cloned SearXNG repository, which is not the case if you clone
it into a folder below ``/root``!
.. sidebar:: further read

View File

@ -52,8 +52,8 @@ In the same shell create *virtualenv*:
:start-after: START create virtualenv
:end-before: END create virtualenv
To install searx's dependencies, exit the SearXNG *bash* session you opened above
and restart a new. Before install, first check if your *virtualenv* was sourced
To install SearXNG's dependencies, exit the SearXNG *bash* session you opened above
and start a new one. Before installing, check if your *virtualenv* was sourced
from the login (*~/.profile*):
.. kernel-include:: $DOCS_BUILD/includes/searxng.rst
@ -127,6 +127,6 @@ configuration file.
:end-before: END check searxng installation
If everything works fine, hit ``[CTRL-C]`` to stop the *webapp* and disable the
debug option in ``settings.yml``. You can now exit SearXNG user bash (enter exit
debug option in ``settings.yml``. You can now exit SearXNG user bash session (enter exit
command twice). At this point SearXNG is not demonized; uwsgi allows this.

View File

@ -80,7 +80,7 @@ Distributors
The `uWSGI Emperor`_ mode and `systemd unit template`_ is what the distributors
mostly offer their users, even if they differ in the way they implement both
modes and their defaults. Another point they might differ is the packaging of
modes and their defaults. Another point they might differ in is the packaging of
plugins (if so, compare :ref:`install packages`) and what the default python
interpreter is (python2 vs. python3).
@ -98,8 +98,8 @@ Debian's uWSGI layout
https://salsa.debian.org/uwsgi-team/uwsgi/-/raw/debian/latest/debian/uwsgi.README.Debian
Be aware, Debian's uWSGI layout is quite different from the standard uWSGI
configuration. Your are familiar with :ref:`Debian's Apache layout`? .. they do
similar for the uWSGI infrastructure. The folders are::
configuration. Your are familiar with :ref:`Debian's Apache layout`? .. they do a
similar thing for the uWSGI infrastructure. The folders are::
/etc/uwsgi/apps-available/
/etc/uwsgi/apps-enabled/
@ -108,7 +108,7 @@ The `uwsgi ini file`_ is enabled by a symbolic link::
ln -s /etc/uwsgi/apps-available/searxng.ini /etc/uwsgi/apps-enabled/
More details you will find in the uwsgi.README.Debian_
More details can be found in the uwsgi.README.Debian_
(``/usr/share/doc/uwsgi/README.Debian.gz``). Some commands you should know on
Debian:
@ -235,8 +235,8 @@ major release is from Dec. 2013, since the there had been only bugfix releases
**In Tyrant mode, there is no way to get additional groups, and the uWSGI
process misses additional permissions that may be needed.**
By example, on Fedora (RHEL): If you try to install a redis DB with socket
communication and you want to connect from the SearXNG uWSGI, you will see a
For example on Fedora (RHEL): If you try to install a redis DB with socket
communication and you want to connect to it from the SearXNG uWSGI, you will see a
*Permission denied* in the log of your instance::
ERROR:searx.shared.redis: [searxng (993)] can't connect redis DB ...

View File

@ -10,7 +10,7 @@ Installation
- :ref:`installation scripts`
- :ref:`installation basic`
The :ref:`installation basic` is a excellent illustration of *how a SearXNG
The :ref:`installation basic` is an excellent illustration of *how a SearXNG
instance is build up* (see :ref:`architecture uWSGI`). If you do not have any
special preferences, its recommend to use the :ref:`installation docker` or the
:ref:`installation scripts`.

View File

@ -18,7 +18,7 @@ How to update
=============
How to update depends on the :ref:`installation` method. If you have used the
:ref:`installation scripts`, use ``update`` command from the :ref:`searxng.sh`
:ref:`installation scripts`, use the ``update`` command from the :ref:`searxng.sh`
script.
.. code:: sh
@ -31,7 +31,7 @@ How to inspect & debug
======================
How to debug depends on the :ref:`installation` method. If you have used the
:ref:`installation scripts`, use ``inspect`` command from the :ref:`searxng.sh`
:ref:`installation scripts`, use the ``inspect`` command from the :ref:`searxng.sh`
script.
.. code:: sh

View File

@ -12,7 +12,7 @@
- :ref:`installation nginx`
- :ref:`installation apache`
To simplify installation and maintenance of a SearXNG instance you can use the
To simplify the installation and maintenance of a SearXNG instance you can use the
script :origin:`utils/searxng.sh`.
Install