kamp/searxng
1
0
Fork 0
mirror of https://github.com/searxng/searxng.git synced 2024-11-05 04:40:11 +01:00
Code
8ac776765c
searxng/utils/lib.sh
Alexandre Flament e5e322e8ed [mod] utils/lib.sh: add pyenv.activate 
* initialize virtualenv (pyenv.install)
* activate virtualenv

close #310
2021-09-17 14:15:35 +02:00

1874 lines
49 KiB
Bash
Executable File
Raw Blame History

#!/usr/bin/env bash
# -*- coding: utf-8; mode: sh indent-tabs-mode: nil -*-
# SPDX-License-Identifier: AGPL-3.0-or-later
# shellcheck disable=SC2059,SC1117
# ubuntu, debian, arch, fedora, centos ...
DIST_ID=$(source /etc/os-release; echo "$ID");
# shellcheck disable=SC2034
DIST_VERS=$(source /etc/os-release; echo "$VERSION_ID");
ADMIN_NAME="${ADMIN_NAME:-$(git config user.name)}"
ADMIN_NAME="${ADMIN_NAME:-$USER}"
ADMIN_EMAIL="${ADMIN_EMAIL:-$(git config user.email)}"
ADMIN_EMAIL="${ADMIN_EMAIL:-$USER@$(hostname)}"
if [[ -z "${REPO_ROOT}" ]]; then
REPO_ROOT=$(dirname "${BASH_SOURCE[0]}")
while [ -h "${REPO_ROOT}" ] ; do
REPO_ROOT=$(readlink "${REPO_ROOT}")
done
REPO_ROOT=$(cd "${REPO_ROOT}/.." && pwd -P )
fi
if [[ -z ${TEMPLATES} ]]; then
TEMPLATES="${REPO_ROOT}/utils/templates"
fi
if [[ -z "$CACHE" ]]; then
CACHE="${REPO_ROOT}/cache"
fi
if [[ -z ${DIFF_CMD} ]]; then
DIFF_CMD="diff -u"
if command -v colordiff >/dev/null; then
DIFF_CMD="colordiff -u"
fi
fi
DOT_CONFIG="${DOT_CONFIG:-${REPO_ROOT}/.config.sh}"
source_dot_config() {
if [[ ! -e "${DOT_CONFIG}" ]]; then
err_msg "configuration does not exists at: ${DOT_CONFIG}"
return 42
fi
# shellcheck disable=SC1090
source "${DOT_CONFIG}"
}
sudo_or_exit() {
# usage: sudo_or_exit
if [ ! "$(id -u)" -eq 0 ]; then
err_msg "this command requires root (sudo) privilege!" >&2
exit 42
fi
}
required_commands() {
# usage: required_commands [cmd1 ...]
local exit_val=0
while [ -n "$1" ]; do
if ! command -v "$1" &>/dev/null; then
err_msg "missing command $1"
exit_val=42
fi
shift
done
return $exit_val
}
# colors
# ------
# shellcheck disable=SC2034
set_terminal_colors() {
# https://en.wikipedia.org/wiki/ANSI_escape_code
# CSI (Control Sequence Introducer) sequences
_show_cursor='\e[?25h'
_hide_cursor='\e[?25l'
# SGR (Select Graphic Rendition) parameters
_creset='\e[0m' # reset all attributes
# original specification only had 8 colors
_colors=8
_Black='\e[0;30m'
_White='\e[1;37m'
_Red='\e[0;31m'
_Green='\e[0;32m'
_Yellow='\e[0;33m'
_Blue='\e[0;94m'
_Violet='\e[0;35m'
_Cyan='\e[0;36m'
_BBlack='\e[1;30m'
_BWhite='\e[1;37m'
_BRed='\e[1;31m'
_BGreen='\e[1;32m'
_BYellow='\e[1;33m'
_BBlue='\e[1;94m'
_BPurple='\e[1;35m'
_BCyan='\e[1;36m'
}
if [ ! -p /dev/stdout ] && [ ! "$TERM" = 'dumb' ] && [ ! "$TERM" = 'unknown' ]; then
set_terminal_colors
fi
# reST
# ----
if command -v fmt >/dev/null; then
export FMT="fmt -u"
else
export FMT="cat"
fi
rst_title() {
# usage: rst_title <header-text> [part|chapter|section]
case ${2-chapter} in
part) printf "\n${_BGreen}${1//?/=}${_creset}\n${_BCyan}${1}${_creset}\n${_BGreen}${1//?/=}${_creset}\n";;
chapter) printf "\n${_BCyan}${1}${_creset}\n${_BGreen}${1//?/=}${_creset}\n";;
section) printf "\n${_BCyan}${1}${_creset}\n${_BGreen}${1//?/-}${_creset}\n";;
*)
err_msg "invalid argument '${2}' in line $(caller)"
return 42
;;
esac
}
rst_para() {
# usage: RST_INDENT=1 rst_para "lorem ipsum ..."
local prefix=''
if [[ -n $RST_INDENT ]] && [[ $RST_INDENT -gt 0 ]]; then
prefix="$(for i in $(seq 1 "$RST_INDENT"); do printf " "; done)"
echo -en "\n$*\n" | $FMT | prefix_stdout "$prefix"
else
echo -en "\n$*\n" | $FMT
fi
}
die() {
echo -e "${_BRed}ERROR:${_creset} ${BASH_SOURCE[1]}: line ${BASH_LINENO[0]}: ${2-died ${1-1}}" >&2;
exit "${1-1}"
}
die_caller() {
echo -e "${_BRed}ERROR:${_creset} ${BASH_SOURCE[2]}: line ${BASH_LINENO[1]}: ${FUNCNAME[1]}(): ${2-died ${1-1}}" >&2;
exit "${1-1}"
}
err_msg() { echo -e "${_BRed}ERROR:${_creset} $*" >&2; }
warn_msg() { echo -e "${_BBlue}WARN:${_creset} $*" >&2; }
info_msg() { echo -e "${_BYellow}INFO:${_creset} $*" >&2; }
build_msg() {
local tag="$1 "
shift
echo -e "${_Blue}${tag:0:10}${_creset}$*"
}
dump_return() {
# Use this as last command in your function to prompt an ERROR message if
# the exit code is not zero.
local err=$1
[ "$err" -ne "0" ] && err_msg "${FUNCNAME[1]} exit with error ($err)"
return "$err"
}
clean_stdin() {
if [[ $(uname -s) != 'Darwin' ]]; then
while read -r -n1 -t 0.1; do : ; done
fi
}
wait_key(){
# usage: wait_key [<timeout in sec>]
clean_stdin
local _t=$1
local msg="${MSG}"
[[ -z "$msg" ]] && msg="${_Green}** press any [${_BCyan}KEY${_Green}] to continue **${_creset}"
[[ -n $FORCE_TIMEOUT ]] && _t=$FORCE_TIMEOUT
[[ -n $_t ]] && _t="-t $_t"
printf "$msg"
# shellcheck disable=SC2086
read -r -s -n1 $_t
echo
clean_stdin
}
ask_yn() {
# usage: ask_yn <prompt-text> [Ny|Yn] [<timeout in sec>]
local EXIT_YES=0 # exit status 0 --> successful
local EXIT_NO=1 # exit status 1 --> error code
local _t=$3
[[ -n $FORCE_TIMEOUT ]] && _t=$FORCE_TIMEOUT
[[ -n $_t ]] && _t="-t $_t"
case "${FORCE_SELECTION:-${2}}" in
Y) return ${EXIT_YES} ;;
N) return ${EXIT_NO} ;;
Yn)
local exit_val=${EXIT_YES}
local choice="[${_BGreen}YES${_creset}/no]"
local default="Yes"
;;
*)
local exit_val=${EXIT_NO}
local choice="[${_BGreen}NO${_creset}/yes]"
local default="No"
;;
esac
echo
while true; do
clean_stdin
printf "$1 ${choice} "
# shellcheck disable=SC2086
read -r -n1 $_t
if [[ -z $REPLY ]]; then
printf "$default\n"; break
elif [[ $REPLY =~ ^[Yy]$ ]]; then
exit_val=${EXIT_YES}
printf "\n"
break
elif [[ $REPLY =~ ^[Nn]$ ]]; then
exit_val=${EXIT_NO}
printf "\n"
break
fi
_t=""
err_msg "invalid choice"
done
clean_stdin
return $exit_val
}
tee_stderr () {
# usage::
# tee_stderr 1 <<EOF | python -i
# print("hello")
# EOF
# ...
# >>> print("hello")
# hello
local _t="0";
if [[ -n $1 ]] ; then _t="$1"; fi
(while read -r line; do
# shellcheck disable=SC2086
sleep $_t
echo -e "$line" >&2
echo "$line"
done)
}
prefix_stdout () {
# usage: <cmd> | prefix_stdout [prefix]
local prefix="${_BYellow}-->|${_creset}"
if [[ -n $1 ]] ; then prefix="$1"; fi
# shellcheck disable=SC2162
(while IFS= read line; do
echo -e "${prefix}$line"
done)
# some piped commands hide the cursor, show cursory when the stream ends
echo -en "$_show_cursor"
}
append_line() {
# usage: append_line <line> <file>
#
# Append line if not exists, create file if not exists. E.g::
#
# append_line 'source ~/.foo' ~/bashrc
local LINE=$1
local FILE=$2
grep -qFs -- "$LINE" "$FILE" || echo "$LINE" >> "$FILE"
}
cache_download() {
# usage: cache_download <url> <local-filename>
local exit_value=0
if [[ -n ${SUDO_USER} ]]; then
sudo -u "${SUDO_USER}" mkdir -p "${CACHE}"
else
mkdir -p "${CACHE}"
fi
if [[ -f "${CACHE}/$2" ]] ; then
info_msg "already cached: $1"
info_msg " --> ${CACHE}/$2"
fi
if [[ ! -f "${CACHE}/$2" ]]; then
info_msg "caching: $1"
info_msg " --> ${CACHE}/$2"
if [[ -n ${SUDO_USER} ]]; then
sudo -u "${SUDO_USER}" wget --progress=bar -O "${CACHE}/$2" "$1" ; exit_value=$?
else
wget --progress=bar -O "${CACHE}/$2" "$1" ; exit_value=$?
fi
if [[ ! $exit_value = 0 ]]; then
err_msg "failed to download: $1"
fi
fi
}
backup_file() {
# usage: backup_file /path/to/file.foo
local stamp
stamp=$(date +"_%Y%m%d_%H%M%S")
info_msg "create backup: ${1}${stamp}"
cp -a "${1}" "${1}${stamp}"
}
choose_one() {
# usage:
#
# DEFAULT_SELECT= 2 \
# choose_one <name> "your selection?" "Coffee" "Coffee with milk"
local default=${DEFAULT_SELECT-1}
local REPLY
local env_name=$1 && shift
local choice=$1;
local max="${#@}"
local _t
[[ -n $FORCE_TIMEOUT ]] && _t=$FORCE_TIMEOUT
[[ -n $_t ]] && _t="-t $_t"
list=("$@")
echo -e "${_BGreen}Menu::${_creset}"
for ((i=1; i<= $((max -1)); i++)); do
if [[ "$i" == "$default" ]]; then
echo -e " ${_BGreen}$i.${_creset}) ${list[$i]} [default]"
else
echo -e " $i.) ${list[$i]}"
fi
done
while true; do
clean_stdin
printf "$1 [${_BGreen}$default${_creset}] "
if (( 10 > max )); then
# shellcheck disable=SC2086
read -r -n1 $_t
else
# shellcheck disable=SC2086,SC2229
read -r $_t
fi
# selection fits
[[ $REPLY =~ ^-?[0-9]+$ ]] && (( REPLY > 0 )) && (( REPLY < max )) && break
# take default
[[ -z $REPLY ]] && REPLY=$default && break
_t=""
err_msg "invalid choice"
done
eval "$env_name"='${list[${REPLY}]}'
echo
clean_stdin
}
install_template() {
# usage:
#
# install_template [--no-eval] [--variant=<name>] \
# {file} [{owner} [{group} [{chmod}]]]
#
# E.g. the origin of variant 'raw' of /etc/updatedb.conf is::
#
# ${TEMPLATES}/etc/updatedb.conf:raw
#
# To install variant 'raw' of /etc/updatedb.conf without evaluated
# replacements you can use::
#
# install_template --variant=raw --no-eval \
# /etc/updatedb.conf root root 644
local _reply=""
local do_eval=1
local variant=""
local pos_args=("$0")
for i in "$@"; do
case $i in
--no-eval) do_eval=0; shift ;;
--variant=*) variant=":${i#*=}"; shift ;;
*) pos_args+=("$i") ;;
esac
done
local dst="${pos_args[1]}"
local template_origin="${TEMPLATES}${dst}${variant}"
local template_file="${TEMPLATES}${dst}"
local owner="${pos_args[2]-$(id -un)}"
local group="${pos_args[3]-$(id -gn)}"
local chmod="${pos_args[4]-644}"
info_msg "install (eval=$do_eval): ${dst}"
[[ -n $variant ]] && info_msg "variant --> ${variant}"
if [[ ! -f "${template_origin}" ]] ; then
err_msg "${template_origin} does not exists"
err_msg "... can't install $dst"
wait_key 30
return 42
fi
if [[ "$do_eval" == "1" ]]; then
template_file="${CACHE}${dst}${variant}"
info_msg "BUILD ${template_file}"
info_msg "BUILD using template ${template_origin}"
if [[ -n ${SUDO_USER} ]]; then
sudo -u "${SUDO_USER}" mkdir -p "$(dirname "${template_file}")"
else
mkdir -p "$(dirname "${template_file}")"
fi
# shellcheck disable=SC2086
eval "echo \"$(cat ${template_origin})\"" > "${template_file}"
if [[ -n ${SUDO_USER} ]]; then
chown "${SUDO_USER}:${SUDO_USER}" "${template_file}"
fi
else
template_file=$template_origin
fi
mkdir -p "$(dirname "${dst}")"
if [[ ! -f "${dst}" ]]; then
info_msg "install: ${template_file}"
sudo -H install -v -o "${owner}" -g "${group}" -m "${chmod}" \
"${template_file}" "${dst}" | prefix_stdout
return $?
fi
if [[ -f "${dst}" ]] && cmp --silent "${template_file}" "${dst}" ; then
info_msg "file ${dst} already installed"
return 0
fi
info_msg "different file ${dst} already exists on this host"
while true; do
choose_one _reply "choose next step with file $dst" \
"replace file" \
"leave file unchanged" \
"interactive shell" \
"diff files"
case $_reply in
"replace file")
info_msg "install: ${template_file}"
sudo -H install -v -o "${owner}" -g "${group}" -m "${chmod}" \
"${template_file}" "${dst}" | prefix_stdout
break
;;
"leave file unchanged")
break
;;
"interactive shell")
echo -e "// edit ${_Red}${dst}${_creset} to your needs"
echo -e "// exit with [${_BCyan}CTRL-D${_creset}]"
sudo -H -u "${owner}" -i
$DIFF_CMD "${dst}" "${template_file}"
echo
echo -e "// ${_BBlack}did you edit file ...${_creset}"
echo -en "// ${_Red}${dst}${_creset}"
if ask_yn "//${_BBlack}... to your needs?${_creset}"; then
break
fi
;;
"diff files")
$DIFF_CMD "${dst}" "${template_file}" | prefix_stdout
esac
done
}
service_is_available() {
# usage: service_is_available <URL>
[[ -z $1 ]] && die_caller 42 "missing argument <URL>"
local URL="$1"
http_code=$(curl -H 'Cache-Control: no-cache' \
--silent -o /dev/null --head --write-out '%{http_code}' --insecure \
"${URL}")
exit_val=$?
if [[ $exit_val = 0 ]]; then
info_msg "got $http_code from ${URL}"
fi
case "$http_code" in
404|410|423) exit_val=$http_code;;
esac
return "$exit_val"
}
# python
# ------
PY="${PY:=3}"
PYTHON="${PYTHON:=python$PY}"
PY_ENV="${PY_ENV:=local/py${PY}}"
PY_ENV_BIN="${PY_ENV}/bin"
PY_ENV_REQ="${PY_ENV_REQ:=${REPO_ROOT}/requirements*.txt}"
# List of python packages (folders) or modules (files) installed by command:
# pyenv.install
PYOBJECTS="${PYOBJECTS:=.}"
# folder where the python distribution takes place
PYDIST="${PYDIST:=dist}"
# folder where the intermediate build files take place
PYBUILD="${PYBUILD:=build/py${PY}}"
# https://www.python.org/dev/peps/pep-0508/#extras
#PY_SETUP_EXTRAS='[develop,test]'
PY_SETUP_EXTRAS="${PY_SETUP_EXTRAS:=[develop,test]}"
PIP_BOILERPLATE=( pip wheel setuptools )
# shellcheck disable=SC2120
pyenv() {
# usage: pyenv [vtenv_opts ...]
#
# vtenv_opts: see 'pip install --help'
#
# Builds virtualenv with 'requirements*.txt' (PY_ENV_REQ) installed. The
# virtualenv will be reused by validating sha256sum of the requirement
# files.
required_commands \
sha256sum "${PYTHON}" \
|| exit
local pip_req=()
if ! pyenv.OK > /dev/null; then
rm -f "${PY_ENV}/${PY_ENV_REQ}.sha256"
pyenv.drop > /dev/null
build_msg PYENV "[virtualenv] installing ${PY_ENV_REQ} into ${PY_ENV}"
"${PYTHON}" -m venv "$@" "${PY_ENV}"
"${PY_ENV_BIN}/python" -m pip install -U "${PIP_BOILERPLATE[@]}"
for i in ${PY_ENV_REQ}; do
pip_req=( "${pip_req[@]}" "-r" "$i" )
done
(
[ "$VERBOSE" = "1" ] && set -x
# shellcheck disable=SC2086
"${PY_ENV_BIN}/python" -m pip install "${pip_req[@]}" \
&& sha256sum ${PY_ENV_REQ} > "${PY_ENV}/requirements.sha256"
)
fi
pyenv.OK
}
_pyenv_OK=''
pyenv.OK() {
# probes if pyenv exists and runs the script from pyenv.check
[ "$_pyenv_OK" == "OK" ] && return 0
if [ ! -f "${PY_ENV_BIN}/python" ]; then
build_msg PYENV "[virtualenv] missing ${PY_ENV_BIN}/python"
return 1
fi
if [ ! -f "${PY_ENV}/requirements.sha256" ] \
|| ! sha256sum --check --status <"${PY_ENV}/requirements.sha256" 2>/dev/null; then
build_msg PYENV "[virtualenv] requirements.sha256 failed"
sed 's/^/ [virtualenv] - /' <"${PY_ENV}/requirements.sha256"
return 1
fi
if [ "$VERBOSE" = "1" ]; then
pyenv.check \
| "${PY_ENV_BIN}/python" 2>&1 \
| prefix_stdout "${_Blue}PYENV ${_creset}[check] "
else
pyenv.check | "${PY_ENV_BIN}/python" 1>/dev/null
fi
local err=${PIPESTATUS[1]}
if [ "$err" -ne "0" ]; then
build_msg PYENV "[check] python test failed"
return "$err"
fi
[ "$VERBOSE" = "1" ] && build_msg PYENV "OK"
_pyenv_OK="OK"
return 0
}
pyenv.drop() {
build_msg PYENV "[virtualenv] drop ${PY_ENV}"
rm -rf "${PY_ENV}"
_pyenv_OK=''
}
pyenv.check() {
# Prompts a python script with additional checks. Used by pyenv.OK to check
# if virtualenv is ready to install python objects. This function should be
# overwritten by the application script.
local imp=""
for i in "${PIP_BOILERPLATE[@]}"; do
imp="$imp, $i"
done
cat <<EOF
import ${imp#,*}
EOF
}
pyenv.install() {
if ! pyenv.OK; then
py.clean > /dev/null
fi
if ! pyenv.install.OK > /dev/null; then
build_msg PYENV "[install] ${PYOBJECTS}"
if ! pyenv.OK >/dev/null; then
pyenv
fi
for i in ${PYOBJECTS}; do
build_msg PYENV "[install] pip install -e '$i${PY_SETUP_EXTRAS}'"
"${PY_ENV_BIN}/python" -m pip install -e "$i${PY_SETUP_EXTRAS}"
done
fi
pyenv.install.OK
}
_pyenv_install_OK=''
pyenv.install.OK() {
[ "$_pyenv_install_OK" == "OK" ] && return 0
local imp=""
local err=""
if [ "." = "${PYOBJECTS}" ]; then
imp="import $(basename "$(pwd)")"
else
# shellcheck disable=SC2086
for i in ${PYOBJECTS}; do imp="$imp, $i"; done
imp="import ${imp#,*} "
fi
(
[ "$VERBOSE" = "1" ] && set -x
"${PY_ENV_BIN}/python" -c "import sys; sys.path.pop(0); $imp;" 2>/dev/null
)
err=$?
if [ "$err" -ne "0" ]; then
build_msg PYENV "[install] python installation test failed"
return "$err"
fi
build_msg PYENV "[install] OK"
_pyenv_install_OK="OK"
return 0
}
pyenv.uninstall() {
build_msg PYENV "[uninstall] ${PYOBJECTS}"
if [ "." = "${PYOBJECTS}" ]; then
pyenv.cmd python setup.py develop --uninstall 2>&1 \
| prefix_stdout "${_Blue}PYENV ${_creset}[pyenv.uninstall] "
else
pyenv.cmd python -m pip uninstall --yes ${PYOBJECTS} 2>&1 \
| prefix_stdout "${_Blue}PYENV ${_creset}[pyenv.uninstall] "
fi
}
pyenv.cmd() {
pyenv.install
( set -e
# shellcheck source=/dev/null
source "${PY_ENV_BIN}/activate"
[ "$VERBOSE" = "1" ] && set -x
"$@"
)
}
pyenv.activate() {
pyenv.install
# shellcheck source=/dev/null
source "${PY_ENV_BIN}/activate"
}
# Sphinx doc
# ----------
GH_PAGES="build/gh-pages"
DOCS_DIST="${DOCS_DIST:=dist/docs}"
DOCS_BUILD="${DOCS_BUILD:=build/docs}"
docs.html() {
build_msg SPHINX "HTML ./docs --> file://$(readlink -e "$(pwd)/$DOCS_DIST")"
pyenv.install
docs.prebuild
# shellcheck disable=SC2086
PATH="${PY_ENV_BIN}:${PATH}" pyenv.cmd sphinx-build \
${SPHINX_VERBOSE} ${SPHINXOPTS} \
-b html -c ./docs -d "${DOCS_BUILD}/.doctrees" ./docs "${DOCS_DIST}"
dump_return $?
}
docs.live() {
build_msg SPHINX "autobuild ./docs --> file://$(readlink -e "$(pwd)/$DOCS_DIST")"
pyenv.install
docs.prebuild
# shellcheck disable=SC2086
PATH="${PY_ENV_BIN}:${PATH}" pyenv.cmd sphinx-autobuild \
${SPHINX_VERBOSE} ${SPHINXOPTS} --open-browser --host 0.0.0.0 \
-b html -c ./docs -d "${DOCS_BUILD}/.doctrees" ./docs "${DOCS_DIST}"
dump_return $?
}
docs.clean() {
build_msg CLEAN "docs -- ${DOCS_BUILD} ${DOCS_DIST}"
# shellcheck disable=SC2115
rm -rf "${GH_PAGES}" "${DOCS_BUILD}" "${DOCS_DIST}"
dump_return $?
}
docs.prebuild() {
# Dummy function to run some actions before sphinx-doc build gets started.
# This finction needs to be overwritten by the application script.
true
dump_return $?
}
# shellcheck disable=SC2155
docs.gh-pages() {
# The commit history in the gh-pages branch makes no sense, the history only
# inflates the repository unnecessarily. Therefore a *new orphan* branch
# is created each time we deploy on the gh-pages branch.
docs.clean
docs.prebuild
docs.html
[ "$VERBOSE" = "1" ] && set -x
local head="$(git rev-parse HEAD)"
local branch="$(git name-rev --name-only HEAD)"
local remote="$(git config branch."${branch}".remote)"
local remote_url="$(git config remote."${remote}".url)"
build_msg GH-PAGES "prepare folder: ${GH_PAGES}"
build_msg GH-PAGES "remote of the gh-pages branch: ${remote} / ${remote_url}"
build_msg GH-PAGES "current branch: ${branch}"
# prepare the *orphan* gh-pages working tree
(
git worktree remove -f "${GH_PAGES}"
git branch -D gh-pages
) &> /dev/null || true
git worktree add --no-checkout "${GH_PAGES}" "${remote}/master"
pushd "${GH_PAGES}" &> /dev/null
git checkout --orphan gh-pages
git rm -rfq .
popd &> /dev/null
cp -r "${DOCS_DIST}"/* "${GH_PAGES}"/
touch "${GH_PAGES}/.nojekyll"
cat > "${GH_PAGES}/404.html" <<EOF
<html><head><META http-equiv='refresh' content='0;URL=index.html'></head></html>
EOF
pushd "${GH_PAGES}" &> /dev/null
git add --all .
git commit -q -m "gh-pages build from: ${branch}@${head} (${remote_url})"
git push -f "${remote}" gh-pages
popd &> /dev/null
set +x
build_msg GH-PAGES "deployed"
}
# golang
# ------
go_is_available() {
# usage: go_is_available $SERVICE_USER && echo "go is installed!"
sudo -i -u "${1}" which go &>/dev/null
}
install_go() {
# usage: install_go "${GO_PKG_URL}" "${GO_TAR}" "${SERVICE_USER}"
local _svcpr=" ${_Yellow}|${3}|${_creset} "
rst_title "Install Go in user's HOME" section
rst_para "download and install go binary .."
cache_download "${1}" "${2}"
tee_stderr 0.1 <<EOF | sudo -i -u "${3}" | prefix_stdout "$_svcpr"
echo \$PATH
echo \$GOPATH
mkdir -p \$HOME/local
rm -rf \$HOME/local/go
tar -C \$HOME/local -xzf ${CACHE}/${2}
EOF
sudo -i -u "${3}" <<EOF | prefix_stdout
! which go >/dev/null && echo "ERROR - Go Installation not found in PATH!?!"
which go >/dev/null && go version && echo "congratulations -- Go installation OK :)"
EOF
}
# system accounts
# ---------------
service_account_is_available() {
# usage: service_account_is_available "$SERVICE_USER" && echo "OK"
sudo -i -u "$1" echo \$HOME &>/dev/null
}
drop_service_account() {
# usage: drop_service_account "${SERVICE_USER}"
rst_title "Drop ${1} HOME" section
if ask_yn "Do you really want to drop ${1} home folder?"; then
userdel -r -f "${1}" 2>&1 | prefix_stdout
else
rst_para "Leave HOME folder $(du -sh "${1}") unchanged."
fi
}
interactive_shell(){
# usage: interactive_shell "${SERVICE_USER}"
echo -e "// exit with [${_BCyan}CTRL-D${_creset}]"
sudo -H -u "${1}" -i
}
# systemd
# -------
SYSTEMD_UNITS="${SYSTEMD_UNITS:-/lib/systemd/system}"
systemd_install_service() {
# usage: systemd_install_service "${SERVICE_NAME}" "${SERVICE_SYSTEMD_UNIT}"
rst_title "Install System-D Unit ${1}" section
echo
install_template "${2}" root root 644
wait_key
systemd_activate_service "${1}"
}
systemd_remove_service() {
# usage: systemd_remove_service "${SERVICE_NAME}" "${SERVICE_SYSTEMD_UNIT}"
if ! ask_yn "Do you really want to deinstall systemd unit ${1}?"; then
return 42
fi
systemd_deactivate_service "${1}"
rm "${2}" 2>&1 | prefix_stdout
}
systemd_activate_service() {
# usage: systemd_activate_service "${SERVICE_NAME}"
rst_title "Activate ${1} (service)" section
echo
tee_stderr <<EOF | bash 2>&1
systemctl enable ${1}.service
systemctl restart ${1}.service
EOF
tee_stderr <<EOF | bash 2>&1
systemctl status --no-pager ${1}.service
EOF
}
systemd_deactivate_service() {
# usage: systemd_deactivate_service "${SERVICE_NAME}"
rst_title "De-Activate ${1} (service)" section
echo
tee_stderr <<EOF | bash 2>&1 | prefix_stdout
systemctl stop ${1}.service
systemctl disable ${1}.service
EOF
}
systemd_restart_service() {
# usage: systemd_restart_service "${SERVICE_NAME}"
rst_title "Restart ${1} (service)" section
echo
tee_stderr <<EOF | bash 2>&1
systemctl restart ${1}.service
EOF
tee_stderr <<EOF | bash 2>&1
systemctl status --no-pager ${1}.service
EOF
}
# nginx
# -----
nginx_distro_setup() {
# shellcheck disable=SC2034
NGINX_DEFAULT_SERVER=/etc/nginx/nginx.conf
# Including *location* directives from a dedicated config-folder into the
# server directive is, what fedora and centos (already) does.
NGINX_APPS_ENABLED="/etc/nginx/default.d"
# We add a apps-available folder and linking configurations into the
# NGINX_APPS_ENABLED folder. See also nginx_include_apps_enabled().
NGINX_APPS_AVAILABLE="/etc/nginx/default.apps-available"
case $DIST_ID-$DIST_VERS in
ubuntu-*|debian-*)
NGINX_PACKAGES="nginx"
NGINX_DEFAULT_SERVER=/etc/nginx/sites-available/default
;;
arch-*)
NGINX_PACKAGES="nginx-mainline"
;;
fedora-*|centos-7)
NGINX_PACKAGES="nginx"
;;
*)
err_msg "$DIST_ID-$DIST_VERS: nginx not yet implemented"
;;
esac
}
nginx_distro_setup
install_nginx(){
info_msg "installing nginx ..."
pkg_install "${NGINX_PACKAGES}"
case $DIST_ID-$DIST_VERS in
arch-*|fedora-*|centos-7)
systemctl enable nginx
systemctl start nginx
;;
esac
}
nginx_is_installed() {
command -v nginx &>/dev/null
}
nginx_reload() {
info_msg "reload nginx .."
echo
if ! nginx -t; then
err_msg "testing nginx configuration failed"
return 42
fi
systemctl restart nginx
}
nginx_install_app() {
# usage: nginx_install_app [<template option> ...] <myapp.conf>
#
# <template option>: see install_template
local template_opts=()
local pos_args=("$0")
for i in "$@"; do
case $i in
-*) template_opts+=("$i");;
*) pos_args+=("$i");;
esac
done
nginx_include_apps_enabled "${NGINX_DEFAULT_SERVER}"
install_template "${template_opts[@]}" \
"${NGINX_APPS_AVAILABLE}/${pos_args[1]}" \
root root 644
nginx_enable_app "${pos_args[1]}"
info_msg "installed nginx app: ${pos_args[1]}"
}
nginx_include_apps_enabled() {
# Add the *NGINX_APPS_ENABLED* infrastruture to a nginx server block. Such
# infrastruture is already known from fedora and centos, including apps (location
# directives) from the /etc/nginx/default.d folder into the *default* nginx
# server.
# usage: nginx_include_apps_enabled <config-file>
#
# config-file: Config file with server directive in.
[[ -z $1 ]] && die_caller 42 "missing argument <config-file>"
local server_conf="$1"
# include /etc/nginx/default.d/*.conf;
local include_directive="include ${NGINX_APPS_ENABLED}/*.conf;"
local include_directive_re="^\s*include ${NGINX_APPS_ENABLED}/\*\.conf;"
info_msg "checking existence: '${include_directive}' in file ${server_conf}"
if grep "${include_directive_re}" "${server_conf}"; then
info_msg "OK, already exists."
return
fi
info_msg "add missing directive: '${include_directive}'"
cp "${server_conf}" "${server_conf}.bak"
(
local line
local stage=0
while IFS= read -r line
do
echo "$line"
if [[ $stage = 0 ]]; then
if [[ $line =~ ^[[:space:]]*server*[[:space:]]*\{ ]]; then
stage=1
fi
fi
if [[ $stage = 1 ]]; then
echo " # Load configuration files for the default server block."
echo " $include_directive"
echo ""
stage=2
fi
done < "${server_conf}.bak"
) > "${server_conf}"
}
nginx_remove_app() {
# usage: nginx_remove_app <myapp.conf>
info_msg "remove nginx app: $1"
nginx_dissable_app "$1"
rm -f "${NGINX_APPS_AVAILABLE}/$1"
}
nginx_enable_app() {
# usage: nginx_enable_app <myapp.conf>
local CONF="$1"
info_msg "enable nginx app: ${CONF}"
mkdir -p "${NGINX_APPS_ENABLED}"
rm -f "${NGINX_APPS_ENABLED}/${CONF}"
ln -s "${NGINX_APPS_AVAILABLE}/${CONF}" "${NGINX_APPS_ENABLED}/${CONF}"
nginx_reload
}
nginx_dissable_app() {
# usage: nginx_disable_app <myapp.conf>
local CONF="$1"
info_msg "disable nginx app: ${CONF}"
rm -f "${NGINX_APPS_ENABLED}/${CONF}"
nginx_reload
}
# Apache
# ------
apache_distro_setup() {
# shellcheck disable=SC2034
case $DIST_ID-$DIST_VERS in
ubuntu-*|debian-*)
# debian uses the /etc/apache2 path, while other distros use
# the apache default at /etc/httpd
APACHE_SITES_AVAILABLE="/etc/apache2/sites-available"
APACHE_SITES_ENABLED="/etc/apache2/sites-enabled"
APACHE_MODULES="/usr/lib/apache2/modules"
APACHE_PACKAGES="apache2"
;;
arch-*)
APACHE_SITES_AVAILABLE="/etc/httpd/sites-available"
APACHE_SITES_ENABLED="/etc/httpd/sites-enabled"
APACHE_MODULES="modules"
APACHE_PACKAGES="apache"
;;
fedora-*|centos-7)
APACHE_SITES_AVAILABLE="/etc/httpd/sites-available"
APACHE_SITES_ENABLED="/etc/httpd/sites-enabled"
APACHE_MODULES="modules"
APACHE_PACKAGES="httpd"
;;
*)
err_msg "$DIST_ID-$DIST_VERS: apache not yet implemented"
;;
esac
}
apache_distro_setup
install_apache(){
info_msg "installing apache ..."
pkg_install "$APACHE_PACKAGES"
case $DIST_ID-$DIST_VERS in
arch-*|fedora-*|centos-7)
if ! grep "IncludeOptional sites-enabled" "/etc/httpd/conf/httpd.conf"; then
echo "IncludeOptional sites-enabled/*.conf" >> "/etc/httpd/conf/httpd.conf"
fi
systemctl enable httpd
systemctl start httpd
;;
esac
}
apache_is_installed() {
case $DIST_ID-$DIST_VERS in
ubuntu-*|debian-*) (command -v apachectl) &>/dev/null;;
arch-*) (command -v httpd) &>/dev/null;;
fedora-*|centos-7) (command -v httpd) &>/dev/null;;
esac
}
apache_reload() {
info_msg "reload apache .."
echo
case $DIST_ID-$DIST_VERS in
ubuntu-*|debian-*)
sudo -H apachectl configtest
sudo -H systemctl force-reload apache2
;;
arch-*|fedora-*|centos-7)
sudo -H httpd -t
sudo -H systemctl force-reload httpd
;;
esac
}
apache_install_site() {
# usage: apache_install_site [<template option> ...] <mysite.conf>
#
# <template option>: see install_template
local template_opts=()
local pos_args=("$0")
for i in "$@"; do
case $i in
-*) template_opts+=("$i");;
*) pos_args+=("$i");;
esac
done
install_template "${template_opts[@]}" \
"${APACHE_SITES_AVAILABLE}/${pos_args[1]}" \
root root 644
apache_enable_site "${pos_args[1]}"
info_msg "installed apache site: ${pos_args[1]}"
}
apache_remove_site() {
# usage: apache_remove_site <mysite.conf>
info_msg "remove apache site: $1"
apache_dissable_site "$1"
rm -f "${APACHE_SITES_AVAILABLE}/$1"
}
apache_enable_site() {
# usage: apache_enable_site <mysite.conf>
local CONF="$1"
info_msg "enable apache site: ${CONF}"
case $DIST_ID-$DIST_VERS in
ubuntu-*|debian-*)
sudo -H a2ensite -q "${CONF}"
;;
arch-*)
mkdir -p "${APACHE_SITES_ENABLED}"
rm -f "${APACHE_SITES_ENABLED}/${CONF}"
ln -s "${APACHE_SITES_AVAILABLE}/${CONF}" "${APACHE_SITES_ENABLED}/${CONF}"
;;
fedora-*|centos-7)
mkdir -p "${APACHE_SITES_ENABLED}"
rm -f "${APACHE_SITES_ENABLED}/${CONF}"
ln -s "${APACHE_SITES_AVAILABLE}/${CONF}" "${APACHE_SITES_ENABLED}/${CONF}"
;;
esac
apache_reload
}
apache_dissable_site() {
# usage: apache_disable_site <mysite.conf>
local CONF="$1"
info_msg "disable apache site: ${CONF}"
case $DIST_ID-$DIST_VERS in
ubuntu-*|debian-*)
sudo -H a2dissite -q "${CONF}"
;;
arch-*)
rm -f "${APACHE_SITES_ENABLED}/${CONF}"
;;
fedora-*|centos-7)
rm -f "${APACHE_SITES_ENABLED}/${CONF}"
;;
esac
apache_reload
}
# uWSGI
# -----
uWSGI_SETUP="${uWSGI_SETUP:=/etc/uwsgi}"
uWSGI_USER=
uWSGI_GROUP=
# How distros manage uWSGI apps is very different. From uWSGI POV read:
# - https://uwsgi-docs.readthedocs.io/en/latest/Management.html
uWSGI_distro_setup() {
case $DIST_ID-$DIST_VERS in
ubuntu-*|debian-*)
# init.d --> /usr/share/doc/uwsgi/README.Debian.gz
# For uWSGI debian uses the LSB init process, this might be changed
# one day, see https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=833067
uWSGI_APPS_AVAILABLE="${uWSGI_SETUP}/apps-available"
uWSGI_APPS_ENABLED="${uWSGI_SETUP}/apps-enabled"
uWSGI_PACKAGES="uwsgi"
;;
arch-*)
# systemd --> /usr/lib/systemd/system/uwsgi@.service
# For uWSGI archlinux uses systemd template units, see
# - http://0pointer.de/blog/projects/instances.html
# - https://uwsgi-docs.readthedocs.io/en/latest/Systemd.html#one-service-per-app-in-systemd
uWSGI_APPS_AVAILABLE="${uWSGI_SETUP}/apps-archlinux"
uWSGI_APPS_ENABLED="${uWSGI_SETUP}"
uWSGI_PACKAGES="uwsgi"
;;
fedora-*|centos-7)
# systemd --> /usr/lib/systemd/system/uwsgi.service
# The unit file starts uWSGI in emperor mode (/etc/uwsgi.ini), see
# - https://uwsgi-docs.readthedocs.io/en/latest/Emperor.html
uWSGI_APPS_AVAILABLE="${uWSGI_SETUP}/apps-available"
uWSGI_APPS_ENABLED="${uWSGI_SETUP}.d"
uWSGI_PACKAGES="uwsgi"
uWSGI_USER="uwsgi"
uWSGI_GROUP="uwsgi"
;;
*)
err_msg "$DIST_ID-$DIST_VERS: uWSGI not yet implemented"
;;
esac
}
uWSGI_distro_setup
install_uwsgi(){
info_msg "installing uwsgi ..."
pkg_install "$uWSGI_PACKAGES"
case $DIST_ID-$DIST_VERS in
fedora-*|centos-7)
# enable & start should be called once at uWSGI installation time
systemctl enable uwsgi
systemctl restart uwsgi
;;
esac
}
uWSGI_restart() {
# usage: uWSGI_restart() <myapp.ini>
local CONF="$1"
[[ -z $CONF ]] && die_caller 42 "missing argument <myapp.ini>"
info_msg "restart uWSGI service"
case $DIST_ID-$DIST_VERS in
ubuntu-*|debian-*)
# the 'service' method seems broken in that way, that it (re-)starts
# the whole uwsgi process.
service uwsgi restart "${CONF%.*}"
;;
arch-*)
# restart systemd template instance
if uWSGI_app_available "${CONF}"; then
systemctl restart "uwsgi@${CONF%.*}"
else
info_msg "[uWSGI:systemd-template] ${CONF} not installed (no need to restart)"
fi
;;
fedora-*|centos-7)
# in emperor mode, just touch the file to restart
if uWSGI_app_enabled "${CONF}"; then
touch "${uWSGI_APPS_ENABLED}/${CONF}"
# it seems, there is a polling time in between touch and restart
# of the service.
sleep 3
else
info_msg "[uWSGI:emperor] ${CONF} not installed (no need to restart)"
fi
;;
*)
err_msg "$DIST_ID-$DIST_VERS: uWSGI not yet implemented"
return 42
;;
esac
}
uWSGI_prepare_app() {
# usage: uWSGI_prepare_app <myapp.ini>
[[ -z $1 ]] && die_caller 42 "missing argument <myapp.ini>"
local APP="${1%.*}"
case $DIST_ID-$DIST_VERS in
fedora-*|centos-7)
# in emperor mode, the uwsgi user is the owner of the sockets
info_msg "prepare (uwsgi:uwsgi) /run/uwsgi/app/${APP}"
mkdir -p "/run/uwsgi/app/${APP}"
chown -R "uwsgi:uwsgi" "/run/uwsgi/app/${APP}"
;;
*)
info_msg "prepare (${SERVICE_USER}:${SERVICE_GROUP}) /run/uwsgi/app/${APP}"
mkdir -p "/run/uwsgi/app/${APP}"
chown -R "${SERVICE_USER}:${SERVICE_GROUP}" "/run/uwsgi/app/${APP}"
;;
esac
}
uWSGI_app_available() {
# usage: uWSGI_app_available <myapp.ini>
local CONF="$1"
[[ -z $CONF ]] && die_caller 42 "missing argument <myapp.ini>"
[[ -f "${uWSGI_APPS_AVAILABLE}/${CONF}" ]]
}
uWSGI_install_app() {
# usage: uWSGI_install_app [<template option> ...] <myapp.ini>
#
# <template option>: see install_template
local pos_args=("$0")
for i in "$@"; do
case $i in
-*) template_opts+=("$i");;
*) pos_args+=("$i");;
esac
done
uWSGI_prepare_app "${pos_args[1]}"
mkdir -p "${uWSGI_APPS_AVAILABLE}"
install_template "${template_opts[@]}" \
"${uWSGI_APPS_AVAILABLE}/${pos_args[1]}" \
root root 644
uWSGI_enable_app "${pos_args[1]}"
uWSGI_restart "${pos_args[1]}"
info_msg "uWSGI app: ${pos_args[1]} is installed"
}
uWSGI_remove_app() {
# usage: uWSGI_remove_app <myapp.ini>
local CONF="$1"
[[ -z $CONF ]] && die_caller 42 "missing argument <myapp.ini>"
info_msg "remove uWSGI app: ${CONF}"
uWSGI_disable_app "${CONF}"
uWSGI_restart "${CONF}"
rm -f "${uWSGI_APPS_AVAILABLE}/${CONF}"
}
uWSGI_app_enabled() {
# usage: uWSGI_app_enabled <myapp.ini>
local exit_val=0
local CONF="$1"
[[ -z $CONF ]] && die_caller 42 "missing argument <myapp.ini>"
case $DIST_ID-$DIST_VERS in
ubuntu-*|debian-*)
[[ -f "${uWSGI_APPS_ENABLED}/${CONF}" ]]
exit_val=$?
;;
arch-*)
systemctl -q is-enabled "uwsgi@${CONF%.*}"
exit_val=$?
;;
fedora-*|centos-7)
[[ -f "${uWSGI_APPS_ENABLED}/${CONF}" ]]
exit_val=$?
;;
*)
# FIXME
err_msg "$DIST_ID-$DIST_VERS: uWSGI not yet implemented"
exit_val=1
;;
esac
return $exit_val
}
# shellcheck disable=SC2164
uWSGI_enable_app() {
# usage: uWSGI_enable_app <myapp.ini>
local CONF="$1"
[[ -z $CONF ]] && die_caller 42 "missing argument <myapp.ini>"
case $DIST_ID-$DIST_VERS in
ubuntu-*|debian-*)
mkdir -p "${uWSGI_APPS_ENABLED}"
rm -f "${uWSGI_APPS_ENABLED}/${CONF}"
ln -s "${uWSGI_APPS_AVAILABLE}/${CONF}" "${uWSGI_APPS_ENABLED}/${CONF}"
info_msg "enabled uWSGI app: ${CONF} (restart required)"
;;
arch-*)
mkdir -p "${uWSGI_APPS_ENABLED}"
rm -f "${uWSGI_APPS_ENABLED}/${CONF}"
ln -s "${uWSGI_APPS_AVAILABLE}/${CONF}" "${uWSGI_APPS_ENABLED}/${CONF}"
systemctl enable "uwsgi@${CONF%.*}"
info_msg "enabled uWSGI app: ${CONF} (restart required)"
;;
fedora-*|centos-7)
mkdir -p "${uWSGI_APPS_ENABLED}"
rm -f "${uWSGI_APPS_ENABLED}/${CONF}"
ln -s "${uWSGI_APPS_AVAILABLE}/${CONF}" "${uWSGI_APPS_ENABLED}/${CONF}"
chown "${uWSGI_USER}:${uWSGI_GROUP}" "${uWSGI_APPS_ENABLED}/${CONF}"
info_msg "enabled uWSGI app: ${CONF}"
;;
*)
# FIXME
err_msg "$DIST_ID-$DIST_VERS: uWSGI not yet implemented"
;;
esac
}
uWSGI_disable_app() {
# usage: uWSGI_disable_app <myapp.ini>
local CONF="$1"
[[ -z $CONF ]] && die_caller 42 "missing argument <myapp.ini>"
case $DIST_ID-$DIST_VERS in
ubuntu-*|debian-*)
service uwsgi stop "${CONF%.*}"
rm -f "${uWSGI_APPS_ENABLED}/${CONF}"
info_msg "disabled uWSGI app: ${CONF} (restart uWSGI required)"
;;
arch-*)
systemctl stop "uwsgi@${CONF%.*}"
systemctl disable "uwsgi@${CONF%.*}"
rm -f "${uWSGI_APPS_ENABLED}/${CONF}"
;;
fedora-*|centos-7)
# in emperor mode, just remove the app.ini file
rm -f "${uWSGI_APPS_ENABLED}/${CONF}"
;;
*)
# FIXME
err_msg "$DIST_ID-$DIST_VERS: uWSGI not yet implemented"
;;
esac
}
# distro's package manager
# ------------------------
_apt_pkg_info_is_updated=0
pkg_install() {
# usage: TITEL='install foobar' pkg_install foopkg barpkg
rst_title "${TITLE:-installation of packages}" section
echo -e "\npackage(s)::\n"
# shellcheck disable=SC2068
echo " " $@ | $FMT
if ! ask_yn "Should packages be installed?" Yn 30; then
return 42
fi
case $DIST_ID in
ubuntu|debian)
if [[ $_apt_pkg_info_is_updated == 0 ]]; then
export _apt_pkg_info_is_updated=1
apt update
fi
# shellcheck disable=SC2068
apt-get install -m -y $@
;;
arch)
# shellcheck disable=SC2068
pacman --noprogressbar -Sy --noconfirm $@
;;
fedora)
# shellcheck disable=SC2068
dnf install -y $@
;;
centos)
# shellcheck disable=SC2068
yum install -y $@
;;
esac
}
pkg_remove() {
# usage: TITEL='remove foobar' pkg_remove foopkg barpkg
rst_title "${TITLE:-remove packages}" section
echo -e "\npackage(s)::\n"
# shellcheck disable=SC2068
echo " " $@ | $FMT
if ! ask_yn "Should packages be removed (purge)?" Yn 30; then
return 42
fi
case $DIST_ID in
ubuntu|debian)
# shellcheck disable=SC2068
apt-get purge --autoremove --ignore-missing -y $@
;;
arch)
# shellcheck disable=SC2068
pacman --noprogressbar -R --noconfirm $@
;;
fedora)
# shellcheck disable=SC2068
dnf remove -y $@
;;
centos)
# shellcheck disable=SC2068
yum remove -y $@
;;
esac
}
pkg_is_installed() {
# usage: pkg_is_install foopkg || pkg_install foopkg
case $DIST_ID in
ubuntu|debian)
dpkg -l "$1" &> /dev/null
return $?
;;
arch)
pacman -Qsq "$1" &> /dev/null
return $?
;;
fedora)
dnf list -q --installed "$1" &> /dev/null
return $?
;;
centos)
yum list -q --installed "$1" &> /dev/null
return $?
;;
esac
}
# git tooling
# -----------
# shellcheck disable=SC2164
git_clone() {
# usage:
#
# git_clone <url> <name> [<branch> [<user>]]
# git_clone <url> <path> [<branch> [<user>]]
#
# First form uses $CACHE/<name> as destination folder, second form clones
# into <path>. If repository is already cloned, pull from <branch> and
# update working tree (if needed, the caller has to stash local changes).
#
# git clone https://github.com/searxng/searxng searx-src origin/master searxlogin
#
local url="$1"
local dest="$2"
local branch="$3"
local user="$4"
local bash_cmd="bash"
local remote="origin"
if [[ ! "${dest:0:1}" = "/" ]]; then
dest="$CACHE/$dest"
fi
[[ -z $branch ]] && branch=master
[[ -z $user ]] && [[ -n "${SUDO_USER}" ]] && user="${SUDO_USER}"
[[ -n $user ]] && bash_cmd="sudo -H -u $user -i"
if [[ -d "${dest}" ]] ; then
info_msg "already cloned: $dest"
tee_stderr 0.1 <<EOF | $bash_cmd 2>&1 | prefix_stdout " ${_Yellow}|$user|${_creset} "
cd "${dest}"
git checkout -m -B "$branch" --track "$remote/$branch"
git pull --all
EOF
else
info_msg "clone into: $dest"
tee_stderr 0.1 <<EOF | $bash_cmd 2>&1 | prefix_stdout " ${_Yellow}|$user|${_creset} "
mkdir -p "$(dirname "$dest")"
cd "$(dirname "$dest")"
git clone --branch "$branch" --origin "$remote" "$url" "$(basename "$dest")"
EOF
fi
}
# containers
# ----------
in_container() {
# Test if shell runs in a container.
#
# usage: in_container && echo "process running inside a LXC container"
# in_container || echo "process is not running inside a LXC container"
#
# sudo_or_exit
# hint: Reads init process environment, therefore root access is required!
# to be safe, take a look at the environment of process 1 (/sbin/init)
# grep -qa 'container=lxc' /proc/1/environ
# see lxc_init_container_env
[[ -f /.lxcenv ]]
}
LXC_ENV_FOLDER=
if in_container; then
# shellcheck disable=SC2034
LXC_ENV_FOLDER="lxc-env/$(hostname)/"
PY_ENV="${LXC_ENV_FOLDER}${PY_ENV}"
PY_ENV_BIN="${LXC_ENV_FOLDER}${PY_ENV_BIN}"
PYDIST="${LXC_ENV_FOLDER}${PYDIST}"
PYBUILD="${LXC_ENV_FOLDER}${PYBUILD}"
DOCS_DIST="${LXC_ENV_FOLDER}${DOCS_DIST}"
DOCS_BUILD="${LXC_ENV_FOLDER}${DOCS_BUILD}"
fi
lxc_init_container_env() {
# usage: lxc_init_container_env <name>
# Create a /.lxcenv file in the root folder. Call this once after the
# container is inital started and before installing any boilerplate stuff.
info_msg "create /.lxcenv in container $1"
cat <<EOF | lxc exec "${1}" -- bash | prefix_stdout "[${_BBlue}${1}${_creset}] "
touch "/.lxcenv"
ls -l "/.lxcenv"
EOF
}
# apt packages
LXC_BASE_PACKAGES_debian="bash git build-essential python3 python3-venv"
# pacman packages
LXC_BASE_PACKAGES_arch="bash git base-devel python"
# dnf packages
LXC_BASE_PACKAGES_fedora="bash git @development-tools python"
# yum packages
LXC_BASE_PACKAGES_centos="bash git python3"
case $DIST_ID in
ubuntu|debian) LXC_BASE_PACKAGES="${LXC_BASE_PACKAGES_debian}" ;;
arch) LXC_BASE_PACKAGES="${LXC_BASE_PACKAGES_arch}" ;;
fedora) LXC_BASE_PACKAGES="${LXC_BASE_PACKAGES_fedora}" ;;
centos) LXC_BASE_PACKAGES="${LXC_BASE_PACKAGES_centos}" ;;
*) err_msg "$DIST_ID-$DIST_VERS: pkg_install LXC_BASE_PACKAGES not yet implemented" ;;
esac
lxc_install_base_packages() {
info_msg "install LXC_BASE_PACKAGES in container $1"
case $DIST_ID in
centos) yum groupinstall "Development Tools" -y ;;
esac
pkg_install "${LXC_BASE_PACKAGES}"
}
lxc_image_copy() {
# usage: lxc_image_copy <remote image> <local image>
#
# lxc_image_copy "images:ubuntu/20.04" "ubu2004"
if lxc_image_exists "local:${LXC_SUITE[i+1]}"; then
info_msg "image ${LXC_SUITE[i]} already copied --> ${LXC_SUITE[i+1]}"
else
info_msg "copy image locally ${LXC_SUITE[i]} --> ${LXC_SUITE[i+1]}"
lxc image copy "${LXC_SUITE[i]}" local: \
--alias "${LXC_SUITE[i+1]}" | prefix_stdout
fi
}
lxc_init_container() {
# usage: lxc_init_container <image name> <container name>
local image_name="$1"
local container_name="$2"
if lxc info "${container_name}" &>/dev/null; then
info_msg "container '${container_name}' already exists"
else
info_msg "create container instance: ${container_name}"
lxc init "local:${image_name}" "${container_name}"
fi
}
lxc_exists(){
# usage: lxc_exists <name> || echo "container <name> does not exists"
lxc info "$1" &>/dev/null
}
lxc_image_exists(){
# usage: lxc_image_exists <alias> || echo "image <alias> does locally not exists"
lxc image info "local:$1" &>/dev/null
}
lxc_delete_container() {
# usage: lxc_delete_container <container-name>
if lxc info "$1" &>/dev/null; then
info_msg "stop & delete instance ${_BBlue}${1}${_creset}"
lxc stop "$1" &>/dev/null
lxc delete "$1" | prefix_stdout
else
warn_msg "instance '$1' does not exist / can't delete :o"
fi
}
lxc_delete_local_image() {
# usage: lxc_delete_local_image <container-name>
info_msg "delete image 'local:$i'"
lxc image delete "local:$i"
}
# IP
# --
global_IPs(){
# usage: global_IPS
#
# print list of host's SCOPE global addresses and adapters e.g::
#
# $ global_IPs
# enp4s0|192.168.1.127
# lxdbr0|10.246.86.1
# lxdbr0|fd42:8c58:2cd:b73f::1
ip -o addr show | sed -nr 's/[0-9]*:\s*([a-z0-9]*).*inet[6]?\s*([a-z0-9.:]*).*scope global.*/\1|\2/p'
}
primary_ip() {
case $DIST_ID in
arch)
ip -o addr show \
| sed -nr 's/[0-9]*:\s*([a-z0-9]*).*inet[6]?\s*([a-z0-9.:]*).*scope global.*/\2/p' \
| head -n 1
;;
*) hostname -I | cut -d' ' -f1 ;;
esac
}
# URL
# ---
url_replace_hostname(){
# usage: url_replace_hostname <url> <new hostname>
# to replace hostname by primary IP::
#
# url_replace_hostname http://searx-ubu1604/morty $(primary_ip)
# http://10.246.86.250/morty
# shellcheck disable=SC2001
echo "$1" | sed "s|\(http[s]*://\)[^/]*\(.*\)|\1$2\2|"
}
View Git Blame Copy Permalink