1
0
mirror of https://github.com/donaldzou/WGDashboard.git synced 2024-11-06 07:50:13 +01:00

Reoganise the documents and added experimental Alpine Linux support in wgd.sh

This commit is contained in:
Dselen 2024-08-23 07:46:41 -05:00
parent e3771a1c53
commit 518e29118c
7 changed files with 372 additions and 28 deletions

62
docker/alpine/Dockerfile Normal file
View File

@ -0,0 +1,62 @@
# Pull from small Debian stable image.
FROM alpine:latest AS build
LABEL maintainer="dselen@nerthus.nl"
# Declaring environment variables, change Peernet to an address you like, standard is a 24 bit subnet.
ARG Git_Url="https://github.com/donaldzou/WGDashboard.git"
ARG wg_net="10.0.0.1"
ARG wg_port="51820"
# Following ENV variables are changable on container runtime because /entrypoint.sh handles that. See compose.yaml for more info.
ENV TZ="Europe/Amsterdam"
ENV global_dns="1.1.1.1"
ENV enable="none"
ENV isolate="wg0"
ENV public_ip="0.0.0.0"
ENV update="yes"
# Doing package management operations, such as upgrading
RUN apk update \
&& apk add --no-cache bash git curl tzdata \
wireguard-tools sudo \
gcc py3-pip python3-dev musl-dev linux-headers
# Using WGDASH -- like wg_net functionally as a ARG command. But it is needed in entrypoint.sh so it needs to be exported as environment variable.
ENV WGDASH=/opt/wireguarddashboard
# Removing the Linux Image package to preserve space on the image, for this reason also deleting apt lists, to be able to install packages: run apt update.
# Doing WireGuard Dashboard installation measures. Modify the git clone command to get the preferred version, with a specific branch for example.
RUN mkdir -p /setup/conf && mkdir /setup/app && mkdir ${WGDASH}
#&& git clone ${Git_Url} /setup/app
COPY src /setup/app/src
# Set the volume to be used for WireGuard configuration persistency.
VOLUME /etc/wireguard
VOLUME ${WGDASH}
# Generate basic WireGuard interface. Echoing the WireGuard interface config for readability, adjust if you want it for efficiency.
# Also setting the pipefail option, verbose: https://github.com/hadolint/hadolint/wiki/DL4006.
SHELL ["/bin/bash", "-o", "pipefail", "-c"]
RUN echo "[Interface]" > /setup/conf/wg0.conf \
&& echo "Address = ${wg_net}/24" >> /setup/conf/wg0.conf \
&& echo "PrivateKey =" >> /setup/conf/wg0.conf \
&& echo "PostUp = iptables -t nat -I POSTROUTING 1 -s ${wg_net}/24 -o $(ip -o -4 route show to default | awk '{print $NF}') -j MASQUERADE" >> /setup/conf/wg0.conf \
&& echo "PostUp = iptables -I FORWARD -i wg0 -o wg0 -j DROP" >> /setup/conf/wg0.conf \
&& echo "PreDown = iptables -t nat -D POSTROUTING -s ${wg_net}/24 -o $(ip -o -4 route show to default | awk '{print $NF}') -j MASQUERADE" >> /setup/conf/wg0.conf \
&& echo "PreDown = iptables -D FORWARD -i wg0 -o wg0 -j DROP" >> /setup/conf/wg0.conf \
&& echo "ListenPort = ${wg_port}" >> /setup/conf/wg0.conf \
&& echo "SaveConfig = true" >> /setup/conf/wg0.conf \
&& echo "DNS = ${global_dns}" >> /setup/conf/wg0.conf
# Defining a way for Docker to check the health of the container. In this case: checking the login URL.
HEALTHCHECK --interval=2m --timeout=1m --start-period=20s --retries=3 \
CMD [ "$(curl -s -o /dev/null -w '%{http_code}' http://localhost:10086/)" -eq "200" ] || exit 1
# Copy the basic entrypoint.sh script.
COPY entrypoint.sh /entrypoint.sh
# Exposing the default WireGuard Dashboard port for web access.
EXPOSE 10086
ENTRYPOINT ["/bin/bash", "/entrypoint.sh"]

237
docker/alpine/entrypoint.sh Normal file
View File

@ -0,0 +1,237 @@
#!/bin/bash
echo "------------------------- START ----------------------------"
echo "Starting the WireGuard Dashboard Docker container."
ensure_installation() {
# When using a custom directory to store the files, this part moves over and makes sure the installation continues.
echo "Checking if everything is present."
if [ -z "$(ls -A "${WGDASH}")" ]; then
echo "Detected empty directory, moving over..."
mv /setup/app/* "${WGDASH}"
python3 -m venv "${WGDASH}"/src/venv
. "${WGDASH}/src/venv/bin/activate"
chmod +x "${WGDASH}"/src/wgd.sh
cd "${WGDASH}"/src || exit
./wgd.sh install
echo "Looks like the installation succesfully moved over."
else
echo "Looks like everything is present."
fi
# This first step is to ensure the wg0.conf file exists, and if not, then its copied over from the ephemeral container storage.
if [ ! -f "/etc/wireguard/wg0.conf" ]; then
echo "Standard wg0 Configuration file not found, grabbing template."
cp "/setup/conf/wg0.conf" "/etc/wireguard/wg0.conf"
echo "Setting a secure private key."
local privateKey
privateKey=$(wg genkey)
sed -i "s|^PrivateKey =$|PrivateKey = ${privateKey}|g" /etc/wireguard/wg0.conf
sed -i "s|^PrivateKey *=.*$|PrivateKey = ${privateKey}|g" /etc/wireguard/wg0.conf
echo "Done setting template."
else
echo "Existing wg0 configuration file found, using that."
fi
}
# === CLEAN UP ===
clean_up() {
printf "\n------------------------ CLEAN UP --------------------------\n"
# Cleaning out previous data such as the .pid file and starting the WireGuard Dashboard. Making sure to use the python venv.
echo "Looking for remains of previous instances..."
local pid_file="${WGDASH}/src/gunicorn.pid"
if [ -f "$pid_file" ]; then
echo "Found old pid file, removing."
rm $pid_file
else
echo "No pid remains found, continuing."
fi
# Also check for Python caches (pycache) inspired by https://github.com/shuricksumy
local pycache="${WGDASH}/src/__pycache__"
if [ -d "$pycache" ]; then
local pycache_filecount=$(find "$pycache" -maxdepth 1 -type f | wc -l)
if [ "$pycache_filecount" -gt 0 ]; then
echo "Found old pycaches, removing."
rm -rf "$pycache"/*
else
echo "No pycaches found, continuing."
fi
else
echo "No pycaches found, continuing."
fi
local logdir="${WGDASH}/src/log"
echo "Cleaning log directory."
find /opt/wireguarddashboard/src/log -name 'access_*.log' -exec rm {} +
find /opt/wireguarddashboard/src/log -name 'error_*.log' -exec rm {} +
echo "Removed unneeded logs!"
}
#update_checker() {
#if [ "$update" = "yes" ]; then
# echo "Activating Python venv and executing the WireGuard Dashboard service."
# . "${WGDASH}/src/venv/bin/activate"
# cd "${WGDASH}"/src || exit
# bash wgd.sh update
#else
# echo "Auto Updater disabled"
#fi
#}
# === SET ENV VARS ===
set_envvars() {
printf "\n------------- SETTING ENVIRONMENT VARIABLES ----------------\n"
# If the timezone is different, for example in North-America or Asia.
if [ "${TZ}" != "$(cat /etc/localtime)" ]; then
echo "Changing timezone."
ln -sf /usr/share/zoneinfo/"${TZ}" /etc/localtime
echo "${TZ}" > /etc/timezone
else
echo "Timezone is set correctly."
fi
# Changing the DNS used for clients and the dashboard itself.
if [ "${global_dns}" != "$(grep "peer_global_dns = " /opt/wireguarddashboard/src/wg-dashboard.ini | awk '{print $NF}')" ]; then
echo "Changing default dns."
#sed -i "s/^DNS = .*/DNS = ${global_dns}/" /etc/wireguard/wg0.conf # Uncomment if you want to have DNS on server-level.
sed -i "s/^peer_global_dns = .*/peer_global_dns = ${global_dns}/" /opt/wireguarddashboard/src/wg-dashboard.ini
else
echo "DNS is set correctly."
fi
# Setting the public IP of the WireGuard Dashboard container host. If not defined, it will trying fetching it using a curl to ifconfig.me.
if [ "${public_ip}" = "0.0.0.0" ]; then
default_ip=$(curl -s ifconfig.me)
echo "Trying to fetch the Public-IP using ifconfig.me: ${default_ip}"
sed -i "s/^remote_endpoint = .*/remote_endpoint = ${default_ip}/" /opt/wireguarddashboard/src/wg-dashboard.ini
elif [ "${public_ip}" != "$(grep "remote_endpoint = " /opt/wireguarddashboard/src/wg-dashboard.ini | awk '{print $NF}')" ]; then
echo "Setting the Public-IP using given variable: ${public_ip}"
sed -i "s/^remote_endpoint = .*/remote_endpoint = ${public_ip}/" /opt/wireguarddashboard/src/wg-dashboard.ini
fi
}
# === CORE SERVICES ===
start_core() {
printf "\n---------------------- STARTING CORE -----------------------\n"
echo "Activating Python venv and executing the WireGuard Dashboard service."
. "${WGDASH}"/src/venv/bin/activate
cd "${WGDASH}"/src || return # If changing the directory fails (permission or presence error), then bash will exist this function, causing the WireGuard Dashboard to not be succesfully launched.
bash wgd.sh start
# Isolated peers feature, first converting the existing configuration files and the given names to arrays.
local configurations=(/etc/wireguard/*)
IFS=',' read -r -a do_isolate <<< "${isolate}"
non_isolate=()
# Checking if there are matches between the two arrays.
for config in "${configurations[@]}"; do
local config=$(echo "$config" | sed -e 's|.*/etc/wireguard/||' -e 's|\.conf$||')
found=false
for interface in "${do_isolate[@]}"; do
if [[ "$config" == "$interface" ]]; then
found=true
break
fi
done
if [ "$found" = false ]; then
non_isolate+=("$config")
fi
done
# Isolating the matches.
for interface in "${do_isolate[@]}"; do
if [ "$interface" = "none" ]; then
echo "Found: $interface, stopping isolation checking."
break
else
if [ -f "/etc/wireguard/${interface}.conf" ]; then
echo "Isolating interface:" $interface
upblocking=$(grep -c "PostUp = iptables -I FORWARD -i ${interface} -o ${interface} -j DROP" /etc/wireguard/${interface}.conf)
downblocking=$(grep -c "PreDown = iptables -D FORWARD -i ${interface} -o ${interface} -j DROP" /etc/wireguard/${interface}.conf)
if [ "$upblocking" -lt 1 ] && [ "$downblocking" -lt 1 ]; then
sed -i "/PostUp =/a PostUp = iptables -I FORWARD -i ${interface} -o ${interface} -j DROP" /etc/wireguard/${interface}.conf
sed -i "/PreDown =/a PreDown = iptables -D FORWARD -i ${interface} -o ${interface} -j DROP" /etc/wireguard/${interface}.conf
fi
else
echo "Configuration for $interface does not seem to exist, continuing."
fi
fi
done
# Removing isolation for the configurations that did not match.
for interface in "${non_isolate[@]}"; do
if [ -f "/etc/wireguard/${interface}.conf" ]; then
echo "Removing Isolation if present for:" $interface
sed -i "/PostUp = iptables -I FORWARD -i ${interface} -o ${interface} -j DROP/d" /etc/wireguard/${interface}.conf
sed -i "/PreDown = iptables -D FORWARD -i ${interface} -o ${interface} -j DROP/d" /etc/wireguard/${interface}.conf
else
echo "Configuration for $interface does not seem to exist, continuing."
fi
done
# The following section takes care of enabling wireguard interfaces on startup. Using arrays and given arguments.
IFS=',' read -r -a enable_array <<< "${enable}"
for interface in "${enable_array[@]}"; do
if [ "$interface" = "none" ]; then
echo "Found: $interface, stopping enabling checking."
break
else
echo "Enabling interface:" $interface
local fileperms=$(stat -c "%a" /etc/wireguard/${interface}.conf)
if [ $fileperms -eq 644 ]; then
echo "Configuration is world accessible, adjusting."
chmod 600 "/etc/wireguard/${interface}.conf"
fi
if [ -f "/etc/wireguard/${interface}.conf" ]; then
wg-quick up $interface
else
echo "No corresponding configuration file found for $interface doing nothing."
fi
fi
done
}
# === CLEAN UP ===
ensure_blocking() {
printf "\n-------------- ENSURING CONTAINER CONTINUATION -------------\n"
sleep 1s
echo "Ensuring container continuation."
# This function checks if the latest error log is created and tails it for docker logs uses.
if find "/opt/wireguarddashboard/src/log" -mindepth 1 -maxdepth 1 -type f | read -r; then
latestErrLog=$(find /opt/wireguarddashboard/src/log -name "error_*.log" | head -n 1)
latestAccLog=$(find /opt/wireguarddashboard/src/log -name "access_*.log" | head -n 1)
tail -f "${latestErrLog}" "${latestAccLog}"
fi
# Blocking command in case of erroring. So the container does not quit.
sleep infinity
}
# Execute functions for the WireGuard Dashboard services, then set the environment variables
ensure_installation
clean_up
#update_checker
start_core
set_envvars
ensure_blocking

View File

@ -8,7 +8,7 @@ ARG wg_net="10.0.0.1"
ARG wg_port="51820"
# Following ENV variables are changable on container runtime because /entrypoint.sh handles that. See compose.yaml for more info.
ENV tz="Europe/Amsterdam"
ENV TZ="Europe/Amsterdam"
ENV global_dns="1.1.1.1"
ENV enable="none"
ENV isolate="wg0"
@ -16,17 +16,15 @@ ENV public_ip="0.0.0.0"
ENV update="yes"
# Doing basic system maintenance. Change the timezone to the desired timezone.
RUN ln -sf /usr/share/zoneinfo/${tz} /etc/localtime
RUN ln -sf /usr/share/zoneinfo/${TZ} /etc/localtime
# Using WGDASH -- like wg_net functionally as a ARG command. But it is needed in entrypoint.sh so it needs to be exported as environment variable.
ENV WGDASH=/opt/wireguarddashboard
# Doing package management operations, such as upgrading
RUN apt-get update && apt-get install -y --no-install-recommends \
curl git iproute2 \
iptables iputils-ping \
openresolv procps traceroute \
python3 python3-pip python3-venv \
curl git \
iptables python3 \
wireguard wireguard-tools \
sudo && \
apt-get remove -y linux-image-* && \

View File

@ -0,0 +1,23 @@
services:
wireguard-dashboard:
image: dselen/wgdashboard:dev
restart: unless-stopped
container_name: wgdashboard
environment:
#- tz= # <--- Set container timezone, default: Europe/Amsterdam.
#- global_dns= # <--- Set global DNS address, default: 1.1.1.1.
- enable=wg0 # <--- Set the interfaces that will be enabled on startup, default: none. The option "off" is also allowed.
- isolate=wg0 # <--- When set to true, it disallows peers to talk to eachother, setting to false, allows it, default: true.
#- public_ip= # <--- Set public IP to ensure the correct one is chosen, defaulting to the IP give by ifconfig.me.
ports:
- 10086:10086/tcp
- 51820:51820/udp
volumes:
- app:/opt/wireguarddashboard
- conf:/etc/wireguard
cap_add:
- NET_ADMIN
volumes:
app:
conf:

View File

@ -7,14 +7,14 @@ ensure_installation() {
# When using a custom directory to store the files, this part moves over and makes sure the installation continues.
echo "Checking if everything is present."
if [ -z "$(ls -A ${WGDASH})" ]; then
if [ -z "$(ls -A "${WGDASH}")" ]; then
echo "Detected empty directory, moving over..."
mv /setup/app/* ${WGDASH}
python3 -m venv ${WGDASH}/src/venv
mv /setup/app/* "${WGDASH}"
python3 -m venv "${WGDASH}"/src/venv
. "${WGDASH}/src/venv/bin/activate"
chmod +x ${WGDASH}/src/wgd.sh
cd ${WGDASH}/src
chmod +x "${WGDASH}"/src/wgd.sh
cd "${WGDASH}"/src || exit
./wgd.sh install
echo "Looks like the installation succesfully moved over."
@ -28,7 +28,10 @@ ensure_installation() {
cp "/setup/conf/wg0.conf" "/etc/wireguard/wg0.conf"
echo "Setting a secure private key."
local privateKey=$(wg genkey)
local privateKey
privateKey=$(wg genkey)
sed -i "s|^PrivateKey =$|PrivateKey = ${privateKey}|g" /etc/wireguard/wg0.conf
sed -i "s|^PrivateKey *=.*$|PrivateKey = ${privateKey}|g" /etc/wireguard/wg0.conf
echo "Done setting template."
@ -44,7 +47,7 @@ clean_up() {
# Cleaning out previous data such as the .pid file and starting the WireGuard Dashboard. Making sure to use the python venv.
echo "Looking for remains of previous instances..."
local pid_file="${WGDASH}/src/gunicorn.pid"
if [ -f $pid_file ]; then
if [ -f "$pid_file" ]; then
echo "Found old pid file, removing."
rm $pid_file
else
@ -88,7 +91,7 @@ set_envvars() {
printf "\n------------- SETTING ENVIRONMENT VARIABLES ----------------\n"
# If the timezone is different, for example in North-America or Asia.
if [ "${tz}" != "$(cat /etc/timezone)" ]; then
if [ "${tz}" != "$(cat /etc/localtime)" ]; then
echo "Changing timezone."
ln -sf /usr/share/zoneinfo/"${tz}" /etc/localtime

View File

@ -65,10 +65,12 @@ _determineOS(){
OS=$ID
elif [ -f /etc/redhat-release ]; then
OS="redhat"
elif [ -f /etc/alpine-release ]; then
OS="alpine"
# elif [ -f /etc/arch-release ]; then
# OS="arch"
else
printf "[WGDashboard] %s Sorry, your OS is not supported. Currently the install script only support Debian-based, Red Hat-based OS." "$heavy_crossmark"
printf "[WGDashboard] %s Sorry, your OS is not supported. Currently the install script only support Debian-based, Red Hat-based OS. With experimental support for Alpine Linux.\n" "$heavy_crossmark"
printf "%s\n" "$helpMsg"
kill $TOP_PID
fi
@ -87,6 +89,9 @@ _installPython(){
{ sudo yum install -y python3 net-tools ; printf "\n\n"; } >> ./log/install.txt
fi
;;
alpine)
{ sudo apk update; sudo apk add python3 net-tools; printf "\n\n"; } >> ./log/install.txt
;;
esac
if ! python3 --version > /dev/null 2>&1
@ -112,8 +117,11 @@ _installPythonVenv(){
{ sudo yum install -y python3-virtualenv; printf "\n\n"; } >> ./log/install.txt
fi
;;
alpine)
{ sudo apk update; sudo apk add py3-virtualenv ; printf "\n\n"; } >> ./log/install.txt
;;
*)
printf "[WGDashboard] %s Sorry, your OS is not supported. Currently the install script only support Debian-based, Red Hat-based OS.\n" "$heavy_crossmark"
printf "[WGDashboard] %s Sorry, your OS is not supported. Currently the install script only support Debian-based, Red Hat-based OS. With experimental support for Alpine Linux.\n" "$heavy_crossmark"
printf "%s\n" "$helpMsg"
kill $TOP_PID
;;
@ -166,8 +174,11 @@ _installPythonPip(){
{ sudo dnf install -y ${pythonExecutable}-pip; printf "\n\n"; } >> ./log/install.txt
fi
;;
alpine)
{ sudo apk update; sudo apk add py3-pip ; printf "\n\n"; } >> ./log/install.txt
;;
*)
printf "[WGDashboard] %s Sorry, your OS is not supported. Currently the install script only support Debian-based, Red Hat-based OS.\n" "$heavy_crossmark"
printf "[WGDashboard] %s Sorry, your OS is not supported. Currently the install script only support Debian-based, Red Hat-based OS. With experimental support for Alpine Linux.\n" "$heavy_crossmark"
printf "%s\n" "$helpMsg"
kill $TOP_PID
;;
@ -185,15 +196,28 @@ _installPythonPip(){
}
_checkWireguard(){
if ! wg -h > /dev/null 2>&1
if [ ! wg -h > /dev/null 2>&1 ] || [ ! wg-quick -h > /dev/null 2>&1 ]
then
printf "[WGDashboard] %s WireGuard is not installed. Please follow instruction on https://www.wireguard.com/install/ to install. \n" "$heavy_crossmark"
kill $TOP_PID
fi
if ! wg-quick -h > /dev/null 2>&1
then
printf "[WGDashboard] %s WireGuard is not installed. Please follow instruction on https://www.wireguard.com/install/ to install. \n" "$heavy_crossmark"
kill $TOP_PID
case "$OS" in
ubuntu|debian)
{ sudo apt update ; sudo apt-get install -y wireguard; printf "\n\n"; } &>> ./log/install.txt
;;
#centos|fedora|redhat|rhel)
# if [ "$pythonExecutable" = "python3" ]; then
# { sudo dnf install -y python3-pip; printf "\n\n"; } >> ./log/install.txt
# else
# { sudo dnf install -y ${pythonExecutable}-pip; printf "\n\n"; } >> ./log/install.txt
# fi
#;;
alpine)
{ sudo apk update; sudo apk add wireguard-tools ; printf "\n\n"; } >> ./log/install.txt
;;
*)
printf "[WGDashboard] %s Sorry, your OS is not supported. Currently the install script only support Debian-based, Red Hat-based OS. With experimental support for Alpine Linux.\n" "$heavy_crossmark"
printf "%s\n" "$helpMsg"
kill $TOP_PID
;;
esac
fi
}
@ -247,9 +271,6 @@ install_wgd(){
_installPythonVenv
_installPythonPip
if [ ! -d "db" ]
then
printf "[WGDashboard] Creating ./db folder\n"