mirror of
https://github.com/mjg59/python-broadlink.git
synced 2024-11-14 03:20:14 +01:00
238 lines
9.2 KiB
Python
238 lines
9.2 KiB
Python
"""Support for climate control."""
|
|
from typing import List
|
|
|
|
from .device import device
|
|
from .exceptions import check_error
|
|
from .helpers import calculate_crc16
|
|
|
|
|
|
class hysen(device):
|
|
"""Controls a Hysen HVAC."""
|
|
|
|
TYPE = "Hysen heating controller"
|
|
|
|
# Send a request
|
|
# input_payload should be a bytearray, usually 6 bytes, e.g. bytearray([0x01,0x06,0x00,0x02,0x10,0x00])
|
|
# Returns decrypted payload
|
|
# New behaviour: raises a ValueError if the device response indicates an error or CRC check fails
|
|
# The function prepends length (2 bytes) and appends CRC
|
|
|
|
def send_request(self, input_payload: bytes) -> bytes:
|
|
"""Send a request to the device."""
|
|
crc = calculate_crc16(input_payload)
|
|
|
|
# first byte is length, +2 for CRC16
|
|
request_payload = bytearray([len(input_payload) + 2, 0x00])
|
|
request_payload.extend(input_payload)
|
|
|
|
# append CRC
|
|
request_payload.append(crc & 0xFF)
|
|
request_payload.append((crc >> 8) & 0xFF)
|
|
|
|
# send to device
|
|
response = self.send_packet(0x6A, request_payload)
|
|
check_error(response[0x22:0x24])
|
|
response_payload = self.decrypt(response[0x38:])
|
|
|
|
# experimental check on CRC in response (first 2 bytes are len, and trailing bytes are crc)
|
|
response_payload_len = response_payload[0]
|
|
if response_payload_len + 2 > len(response_payload):
|
|
raise ValueError(
|
|
"hysen_response_error", "first byte of response is not length"
|
|
)
|
|
crc = calculate_crc16(response_payload[2:response_payload_len])
|
|
if (response_payload[response_payload_len] == crc & 0xFF) and (
|
|
response_payload[response_payload_len + 1] == (crc >> 8) & 0xFF
|
|
):
|
|
return response_payload[2:response_payload_len]
|
|
raise ValueError("hysen_response_error", "CRC check on response failed")
|
|
|
|
def get_temp(self) -> int:
|
|
"""Return the room temperature in degrees celsius."""
|
|
payload = self.send_request(bytearray([0x01, 0x03, 0x00, 0x00, 0x00, 0x08]))
|
|
return payload[0x05] / 2.0
|
|
|
|
def get_external_temp(self) -> int:
|
|
"""Return the external temperature in degrees celsius."""
|
|
payload = self.send_request(bytearray([0x01, 0x03, 0x00, 0x00, 0x00, 0x08]))
|
|
return payload[18] / 2.0
|
|
|
|
def get_full_status(self) -> dict:
|
|
"""Return the state of the device.
|
|
|
|
Timer schedule included.
|
|
"""
|
|
payload = self.send_request(bytearray([0x01, 0x03, 0x00, 0x00, 0x00, 0x16]))
|
|
data = {}
|
|
data["remote_lock"] = payload[3] & 1
|
|
data["power"] = payload[4] & 1
|
|
data["active"] = (payload[4] >> 4) & 1
|
|
data["temp_manual"] = (payload[4] >> 6) & 1
|
|
data["room_temp"] = (payload[5] & 255) / 2.0
|
|
data["thermostat_temp"] = (payload[6] & 255) / 2.0
|
|
data["auto_mode"] = payload[7] & 15
|
|
data["loop_mode"] = (payload[7] >> 4) & 15
|
|
data["sensor"] = payload[8]
|
|
data["osv"] = payload[9]
|
|
data["dif"] = payload[10]
|
|
data["svh"] = payload[11]
|
|
data["svl"] = payload[12]
|
|
data["room_temp_adj"] = ((payload[13] << 8) + payload[14]) / 2.0
|
|
if data["room_temp_adj"] > 32767:
|
|
data["room_temp_adj"] = 32767 - data["room_temp_adj"]
|
|
data["fre"] = payload[15]
|
|
data["poweron"] = payload[16]
|
|
data["unknown"] = payload[17]
|
|
data["external_temp"] = (payload[18] & 255) / 2.0
|
|
data["hour"] = payload[19]
|
|
data["min"] = payload[20]
|
|
data["sec"] = payload[21]
|
|
data["dayofweek"] = payload[22]
|
|
|
|
weekday = []
|
|
for i in range(0, 6):
|
|
weekday.append(
|
|
{
|
|
"start_hour": payload[2 * i + 23],
|
|
"start_minute": payload[2 * i + 24],
|
|
"temp": payload[i + 39] / 2.0,
|
|
}
|
|
)
|
|
|
|
data["weekday"] = weekday
|
|
weekend = []
|
|
for i in range(6, 8):
|
|
weekend.append(
|
|
{
|
|
"start_hour": payload[2 * i + 23],
|
|
"start_minute": payload[2 * i + 24],
|
|
"temp": payload[i + 39] / 2.0,
|
|
}
|
|
)
|
|
|
|
data["weekend"] = weekend
|
|
return data
|
|
|
|
# Change controller mode
|
|
# auto_mode = 1 for auto (scheduled/timed) mode, 0 for manual mode.
|
|
# Manual mode will activate last used temperature.
|
|
# In typical usage call set_temp to activate manual control and set temp.
|
|
# loop_mode refers to index in [ "12345,67", "123456,7", "1234567" ]
|
|
# E.g. loop_mode = 0 ("12345,67") means Saturday and Sunday follow the "weekend" schedule
|
|
# loop_mode = 2 ("1234567") means every day (including Saturday and Sunday) follows the "weekday" schedule
|
|
# The sensor command is currently experimental
|
|
def set_mode(self, auto_mode: int, loop_mode: int, sensor: int = 0) -> None:
|
|
"""Set the mode of the device."""
|
|
mode_byte = ((loop_mode + 1) << 4) + auto_mode
|
|
self.send_request(bytearray([0x01, 0x06, 0x00, 0x02, mode_byte, sensor]))
|
|
|
|
# Advanced settings
|
|
# Sensor mode (SEN) sensor = 0 for internal sensor, 1 for external sensor,
|
|
# 2 for internal control temperature, external limit temperature. Factory default: 0.
|
|
# Set temperature range for external sensor (OSV) osv = 5..99. Factory default: 42C
|
|
# Deadzone for floor temprature (dIF) dif = 1..9. Factory default: 2C
|
|
# Upper temperature limit for internal sensor (SVH) svh = 5..99. Factory default: 35C
|
|
# Lower temperature limit for internal sensor (SVL) svl = 5..99. Factory default: 5C
|
|
# Actual temperature calibration (AdJ) adj = -0.5. Prescision 0.1C
|
|
# Anti-freezing function (FrE) fre = 0 for anti-freezing function shut down,
|
|
# 1 for anti-freezing function open. Factory default: 0
|
|
# Power on memory (POn) poweron = 0 for power on memory off, 1 for power on memory on. Factory default: 0
|
|
def set_advanced(
|
|
self,
|
|
loop_mode: int,
|
|
sensor: int,
|
|
osv: int,
|
|
dif: int,
|
|
svh: int,
|
|
svl: int,
|
|
adj: float,
|
|
fre: int,
|
|
poweron: int,
|
|
) -> None:
|
|
"""Set advanced options."""
|
|
input_payload = bytearray(
|
|
[
|
|
0x01,
|
|
0x10,
|
|
0x00,
|
|
0x02,
|
|
0x00,
|
|
0x05,
|
|
0x0A,
|
|
loop_mode,
|
|
sensor,
|
|
osv,
|
|
dif,
|
|
svh,
|
|
svl,
|
|
(int(adj * 2) >> 8 & 0xFF),
|
|
(int(adj * 2) & 0xFF),
|
|
fre,
|
|
poweron,
|
|
]
|
|
)
|
|
self.send_request(input_payload)
|
|
|
|
# For backwards compatibility only. Prefer calling set_mode directly.
|
|
# Note this function invokes loop_mode=0 and sensor=0.
|
|
def switch_to_auto(self) -> None:
|
|
"""Switch mode to auto."""
|
|
self.set_mode(auto_mode=1, loop_mode=0)
|
|
|
|
def switch_to_manual(self) -> None:
|
|
"""Switch mode to manual."""
|
|
self.set_mode(auto_mode=0, loop_mode=0)
|
|
|
|
# Set temperature for manual mode (also activates manual mode if currently in automatic)
|
|
def set_temp(self, temp: float) -> None:
|
|
"""Set the target temperature."""
|
|
self.send_request(bytearray([0x01, 0x06, 0x00, 0x01, 0x00, int(temp * 2)]))
|
|
|
|
# Set device on(1) or off(0), does not deactivate Wifi connectivity.
|
|
# Remote lock disables control by buttons on thermostat.
|
|
def set_power(self, power: int = 1, remote_lock: int = 0) -> None:
|
|
"""Set the power state of the device."""
|
|
self.send_request(bytearray([0x01, 0x06, 0x00, 0x00, remote_lock, power]))
|
|
|
|
# set time on device
|
|
# n.b. day=1 is Monday, ..., day=7 is Sunday
|
|
def set_time(self, hour: int, minute: int, second: int, day: int) -> None:
|
|
"""Set the time."""
|
|
self.send_request(
|
|
bytearray(
|
|
[0x01, 0x10, 0x00, 0x08, 0x00, 0x02, 0x04, hour, minute, second, day]
|
|
)
|
|
)
|
|
|
|
# Set timer schedule
|
|
# Format is the same as you get from get_full_status.
|
|
# weekday is a list (ordered) of 6 dicts like:
|
|
# {'start_hour':17, 'start_minute':30, 'temp': 22 }
|
|
# Each one specifies the thermostat temp that will become effective at start_hour:start_minute
|
|
# weekend is similar but only has 2 (e.g. switch on in morning and off in afternoon)
|
|
def set_schedule(self, weekday: List[dict], weekend: List[dict]) -> None:
|
|
"""Set timer schedule."""
|
|
# Begin with some magic values ...
|
|
input_payload = bytearray([0x01, 0x10, 0x00, 0x0A, 0x00, 0x0C, 0x18])
|
|
|
|
# Now simply append times/temps
|
|
# weekday times
|
|
for i in range(0, 6):
|
|
input_payload.append(weekday[i]["start_hour"])
|
|
input_payload.append(weekday[i]["start_minute"])
|
|
|
|
# weekend times
|
|
for i in range(0, 2):
|
|
input_payload.append(weekend[i]["start_hour"])
|
|
input_payload.append(weekend[i]["start_minute"])
|
|
|
|
# weekday temperatures
|
|
for i in range(0, 6):
|
|
input_payload.append(int(weekday[i]["temp"] * 2))
|
|
|
|
# weekend temperatures
|
|
for i in range(0, 2):
|
|
input_payload.append(int(weekend[i]["temp"] * 2))
|
|
|
|
self.send_request(input_payload)
|